ADTRAN-ATLAS-V35NX-MIB          DEFINITIONS ::= BEGIN

-- TITLE:               Atlas V.35 Nx Interface MIB
-- FILENAME:            atv35nx.mib
-- PARTNUMBER:
-- AUTHOR:              Benny Sharp

-- HISTORY:
--   02/06/2002	 Created.

-- This MIB defines a generic ATLAS V.35 Nx interface.

IMPORTS
        enterprises, Gauge, Counter
                FROM RFC1155-SMI
        OBJECT-TYPE
                FROM RFC-1212
        ifIndex
                FROM RFC1213-MIB
        TRAP-TYPE
                FROM RFC-1215
        adATLASModuleInfoFPStatus
                FROM ADTRAN-ATLAS-MODULE-MIB
        adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASUnitFPStatus
                FROM ADTRAN-ATLAS-UNIT-MIB;

-- OBJECT IDENTIFIERS
adtran                  OBJECT IDENTIFIER ::= { enterprises 664 }
adMgmt                  OBJECT IDENTIFIER ::= { adtran 2 }
adATLASmg               OBJECT IDENTIFIER ::= { adMgmt 154 }
adGenATLASmg            OBJECT IDENTIFIER ::= { adATLASmg 1 }
adATLASV35Nxmg          OBJECT IDENTIFIER ::= { adGenATLASmg 7 }

adATLASV35NxIfNumber OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of V.35 Nx ports (regardless of their current
        state) present on this system."

    ::= { adATLASV35Nxmg 1 }


--___________________________________________________________
--       The ATLAS V.35 Nx Interface Status Table          --
--___________________________________________________________

adATLASV35NxIfTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF AdATLASV35NxIfEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The ATLAS V.35 Nx Interface Status Table."

    ::= { adATLASV35Nxmg 2 }

adATLASV35NxIfEntry  OBJECT-TYPE
    SYNTAX  AdATLASV35NxIfEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "An entry in the ATLAS V.35 Nx Interface Status Table."
    INDEX   { adATLASV35NxIfIndex }

    ::= { adATLASV35NxIfTable 1 }

AdATLASV35NxIfEntry ::=
    SEQUENCE {
        adATLASV35NxIfIndex
            INTEGER,
        adATLASV35NxIfSlotNum
            INTEGER,
        adATLASV35NxIfPortNum
            INTEGER,
        adATLASV35NxIfAlarmStatus
            INTEGER (0..15),
        adATLASV35NxIfDTEStatus
            INTEGER (0..511),
        adATLASV35NxIfDataRate
            Gauge,
        adATLASV35NxIfPLLFifoStatus
            INTEGER (0..31)
    }

-- Interface Number
adATLASV35NxIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the interface number of a
        particular V.35 Nx port within the ATLAS product.
        This number will be the same as the ifIndex located in
        the MIB-II interface table."

    ::= { adATLASV35NxIfEntry 1 }

-- Slot Number
adATLASV35NxIfSlotNum OBJECT-TYPE
        SYNTAX    INTEGER
        ACCESS    read-only
        STATUS    mandatory
        DESCRIPTION
        "This variable indicates the slot number of a
        particular ATLAS module with a V.35 Nx interface."

    ::= { adATLASV35NxIfEntry 2 }

-- Port Number
adATLASV35NxIfPortNum OBJECT-TYPE
        SYNTAX    INTEGER
        ACCESS    read-only
        STATUS    mandatory
        DESCRIPTION
        "This variable indicates the port number of a
        particular V.35 Nx interface on an ATLAS module."

    ::= { adATLASV35NxIfEntry 3 }

-- Alarm Status
adATLASV35NxIfAlarmStatus    OBJECT-TYPE
    SYNTAX  INTEGER (0..15)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This bit-encoded variable indicates the current alarm
        status of a V.35 Nx interface.  This variable is encoded
        as follows:

        CLOCK SLIP ALARM    0x01
        PLL ALARM           0x02
        ZERO ALARM          0x04
        NO EXT CLK ALARM    0x08

        Note: There may be multiple bits set based on the current
        state of the interface.  If a bit is set, then the
        corresponding alarm is active."

    ::= { adATLASV35NxIfEntry 4 }

-- DTE Status
adATLASV35NxIfDTEStatus  OBJECT-TYPE
    SYNTAX  INTEGER(0..511)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This bit-encoded variable indicates the current state
        of the DTE leads on a V.35 Nx interface.  This variable
        is encoded as follows:

        RTS     0x001
        CTS     0x002
        DTR     0x004
        DSR     0x008
        DCD     0x010
        RI      0x020
        TD      0x040
        RD      0x080
        EC      0x100

        Note: There may be multiple bits set based on the current
        state of the interface.  If a bit is set, then the
        corresponding DTE lead is active."

    ::= { adATLASV35NxIfEntry 5 }

-- Data Rate
adATLASV35NxIfDataRate  OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the current data rate of a
        V.35 Nx interface."

    ::= { adATLASV35NxIfEntry 6 }

-- PLL/FIFO Status
adATLASV35NxIfPLLFifoStatus  OBJECT-TYPE
    SYNTAX  INTEGER(0..31)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This bit-encoded variable indicates the current
        PLL/FIFO status of a V.35 Nx interface.  This
        variable is encoded as follows:

        LOCK     0x01
        RXE      0x02
        RXF      0x04
        TXE      0x08
        TXF      0x10

        Note: There may be multiple bits set based on the current
        state of the interface."

    ::= { adATLASV35NxIfEntry 7 }


--____________________________________________________________
--   The ATLAS V.35 Nx Interface Inband Statistics Table    --
--____________________________________________________________

adATLASV35NxIfInbandStatTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF AdATLASV35NxIfInbandStatEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The ATLAS V.35 Nx Interface Inband Statistics Table."

    ::= { adATLASV35Nxmg 3 }

adATLASV35NxIfInbandStatEntry  OBJECT-TYPE
    SYNTAX  AdATLASV35NxIfInbandStatEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "An entry in the ATLAS V.35 Nx Interface Inband
        Statistics Table."
    INDEX   {adATLASV35NxIfInbandStatIndex }

    ::= { adATLASV35NxIfInbandStatTable 1 }

AdATLASV35NxIfInbandStatEntry ::=
    SEQUENCE {
        adATLASV35NxIfInbandStatIndex
                INTEGER,
        adATLASV35NxIfInbandStatRxFrames
                Counter,
        adATLASV35NxIfInbandStatTxFrames
                Counter,
        adATLASV35NxIfInbandStatRxBytes
                Counter,
        adATLASV35NxIfInbandStatTxBytes
                Counter,
        adATLASV35NxIfInbandStatReset
	    	INTEGER
    }

-- The ATLAS V.35 Nx Interface Inband Statistics Table Index
adATLASV35NxIfInbandStatIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the Interface number of a
        particular V.35 Nx port within the ATLAS product.
        This number will be the same as the ifIndex located in
        the MIB-II interface table."

    ::= { adATLASV35NxIfInbandStatEntry 1 }

-- Receive Frames
adATLASV35NxIfInbandStatRxFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the number of frames
        recieved by a particular V.35 Nx interface."

    ::= { adATLASV35NxIfInbandStatEntry 2 }

-- Transmit Frames
adATLASV35NxIfInbandStatTxFrames OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the number of frames
        transmitted by a particular V.35 Nx interface."

    ::= { adATLASV35NxIfInbandStatEntry 3 }

-- Receive Bytes
adATLASV35NxIfInbandStatRxBytes OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the number of bytes recieved
        by a particular V.35 Nx interface."

    ::= { adATLASV35NxIfInbandStatEntry 4 }

-- Transmit Bytes
adATLASV35NxIfInbandStatTxBytes OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the number of bytes
        transmitted by a particular V.35 Nx interface."

    ::= { adATLASV35NxIfInbandStatEntry 5 }

-- Reset Inband Statistics
adATLASV35NxIfInbandStatReset OBJECT-TYPE
    SYNTAX  INTEGER {
		resetStats(1)
	    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This variable is used to reset the inband statistics."

    ::= { adATLASV35NxIfInbandStatEntry 6 }


-- _______________________________________________________
--   	  The ATLAS V.35 Nx Interface Test Table    	--
-- _______________________________________________________

adATLASV35NxTstTable  OBJECT-TYPE
    SYNTAX  SEQUENCE OF AdATLASV35NxTstEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The ATLAS V.35 Nx Interface Test Table."

    ::= { adATLASV35Nxmg 4 }

adATLASV35NxTstEntry  OBJECT-TYPE
    SYNTAX  AdATLASV35NxTstEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "An entry in the ATLAS V.35 Nx Interface Test Table."
    INDEX   { adATLASV35NxTstIndex }

    ::= { adATLASV35NxTstTable 1 }

AdATLASV35NxTstEntry ::=
    SEQUENCE {
        adATLASV35NxTstIndex
            INTEGER,
        adATLASV35NxTstLoopbk
            INTEGER,
        adATLASV35NxTstLoopbkStatus
            INTEGER,
        adATLASV35NxTst511Pattern
            INTEGER,
        adATLASV35NxTstPatternSync
            INTEGER,
        adATLASV35NxTstPatternSyncLost
            INTEGER,
        adATLASV35NxTstPatternESs
            Counter,
        adATLASV35NxTstInjectErrs
            INTEGER,
        adATLASV35NxTstClearRslts
            INTEGER
    }

-- The ATLAS V.35 Nx Interface Test Table Index
adATLASV35NxTstIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the interface number of a
        particular V.35 Nx port within the ATLAS product.
        This number will be the same as the ifIndex located in
        the MIB-II interface table."

    ::= { adATLASV35NxTstEntry 1 }

-- Loopback Control
adATLASV35NxTstLoopbk OBJECT-TYPE
    SYNTAX  INTEGER {
		noLpBk(1),
		localLpBk(2),
		remoteLpBk(3)
	    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This variable controls the activation and
        deactivation of loopbacks on a particular
        V.35 Nx interface."

    ::= { adATLASV35NxTstEntry 2 }

-- Loopback Status
adATLASV35NxTstLoopbkStatus OBJECT-TYPE
    SYNTAX  INTEGER {
		inactive(1),
		loopingUpRmt(2),
		rmtLooped(3),
		loopingDownRmt(4),
		rmtLoopFailed(5),
		loopedFromRmt(6),
		loopbkActive(7)
	    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates a V.35 Nx interface’s
        current loopback status by displaying one of the
        following status messages:

        • No loopback active
		• Looping up remote unit
		• Remote unit looped back
		• Looping down remote unit
		• Remote loopup failed
		• Port looped from remote source
		• Port loopback active."

    ::= { adATLASV35NxTstEntry 3 }

-- 511 Test Pattern
adATLASV35NxTst511Pattern OBJECT-TYPE
    SYNTAX  INTEGER {
		off(1),
		on(2)
	    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This variable controls the activation and
        deactivation of the 511 test pattern generator
        and detector."

    ::= { adATLASV35NxTstEntry 4 }

-- Test Pattern Synchronization
adATLASV35NxTstPatternSync OBJECT-TYPE
    SYNTAX  INTEGER {
		synced(1),
		noSync(2)
	    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable displays the synchronization status
        of the 511 pattern test."

    ::= { adATLASV35NxTstEntry 5 }

-- Test Pattern Synchronization Lost
adATLASV35NxTstPatternSyncLost OBJECT-TYPE
    SYNTAX  INTEGER {
		syncLost(1),
		syncNotLost(2)
	    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable displays whether or not the synchronization
        was ever lost during the 511 pattern test."

    ::= { adATLASV35NxTstEntry 6 }

-- Test Pattern Errored Seconds
adATLASV35NxTstPatternESs OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This variable indicates the number of seconds
        (after pattern sync) of the 511 pettern test that
        have contained at least one error."

    ::= { adATLASV35NxTstEntry 7 }

-- Error Injection
adATLASV35NxTstInjectErrs OBJECT-TYPE
    SYNTAX  INTEGER {
		injectError(1)
	    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Inject a 511 pattern error into the data stream."

    ::= { adATLASV35NxTstEntry 8 }

-- Clear Test Results
adATLASV35NxTstClearRslts OBJECT-TYPE
    SYNTAX  INTEGER {
		clearResults(1)
	    }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Reset all test results."

    ::= { adATLASV35NxTstEntry 9 }

--___________________________________________
-- ATLAS Enterprise Specific V.35 Nx Traps --
--___________________________________________

adATLASV35NxSlipAlarmActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a SLIP alarm is active."
    --#TYPE         "Error - SLIP Alarm Active"
    --#SUMMARY      "ATLAS 15400700: Received SLIP alarm active for "
    --#SUMMARY      "Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     MAJOR
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400700

adATLASV35NxSlipAlarmInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a SLIP alarm is inactive."
    --#TYPE         "Error - SLIP Alarm Inactive"
    --#SUMMARY      "ATLAS 15400701: Received SLIP alarm inactive for "
    --#SUMMARY      "Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     MAJOR
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400701

adATLASV35NxPLLAlarmActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a PLL alarm is active."
    --#TYPE         "Error - PLL Alarm Active"
    --#SUMMARY      "ATLAS 15400702: Received PLL alarm active for "
    --#SUMMARY      "Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     MAJOR
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400702

adATLASV35NxPLLAlarmInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a PLL alarm is inactive."
    --#TYPE         "Error - PLL Alarm Inactive"
    --#SUMMARY      "ATLAS 15400703: Received PLL alarm inactive for "
    --#SUMMARY      "Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     MAJOR
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400703

adATLASV35NxZeroAlarmActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a Zero alarm is active."
    --#TYPE         "Error - Zero Alarm Active"
    --#SUMMARY      "ATLAS 15400704: Received Zero alarm active for "
    --#SUMMARY      "Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     WARNING
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400704

adATLASV35NxZeroAlarmInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a Zero alarm is inactive."
    --#TYPE         "Error - Zero Alarm Inactive"
    --#SUMMARY      "ATLAS 15400705: Received Zero alarm inactive for "
    --#SUMMARY      "Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     WARNING
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400705

adATLASV35NxExtClkAlarmActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a no external clock alarm is active."
    --#TYPE         "Error - No External Clock Alarm Active"
    --#SUMMARY      "ATLAS 15400706: Received No External Clock alarm active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     MAJOR
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400706

adATLASV35NxExtClkAlarmInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfAlarmStatus
    }
    DESCRIPTION
        "This trap indicates a no external clock alarm is inactive."
    --#TYPE         "Error - No External Clock Alarm Inactive"
    --#SUMMARY      "ATLAS 15400707: Received No External Clock alarm inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, Alarm Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     MAJOR
    --#GENERIC      6
    --#CATEGORY     "Error Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400707

adATLASV35NxRTSActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the RTS Lead is active."
    --#TYPE         "Info - RTS Lead Active"
    --#SUMMARY      "ATLAS 15400708: Received RTS lead active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400708

adATLASV35NxRTSInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the RTS Lead is inactive."
    --#TYPE         "Info - RTS Lead Inactive"
    --#SUMMARY      "ATLAS 15400709: Received RTS lead inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400709

adATLASV35NxCTSActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the CTS Lead is active."
    --#TYPE         "Info - CTS Lead Active"
    --#SUMMARY      "ATLAS 15400710: Received CTS lead active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400710

adATLASV35NxCTSInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the CTS Lead is inactive."
    --#TYPE         "Info - CTS Lead Inactive"
    --#SUMMARY      "ATLAS 15400711: Received CTS lead inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400711

adATLASV35NxDTRActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the DTR Lead is active."
    --#TYPE         "Info - DTR Lead Active"
    --#SUMMARY      "ATLAS 15400712: Received DTR lead active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400712

adATLASV35NxDTRInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the DTR Lead is inactive."
    --#TYPE         "Info - DTR Lead Inactive"
    --#SUMMARY      "ATLAS 15400713: Received DTR lead inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400713

adATLASV35NxDSRActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the DSR Lead is active."
    --#TYPE         "Info - DSR Lead Active"
    --#SUMMARY      "ATLAS 15400714: Received DSR lead active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400714

adATLASV35NxDSRInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the DSR Lead is inactive."
    --#TYPE         "Info - DSR Lead Inactive"
    --#SUMMARY      "ATLAS 15400715: Received DSR lead inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400715

adATLASV35NxDCDActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the DCD Lead is active."
    --#TYPE         "Info - DCD Lead Active"
    --#SUMMARY      "ATLAS 15400716: Received DCD lead active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400716

adATLASV35NxDCDInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the DCD Lead is inactive."
    --#TYPE         "Info - DCD Lead Inactive"
    --#SUMMARY      "ATLAS 15400717: Received DCD lead inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400717

adATLASV35NxRIActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the RI Lead is active."
    --#TYPE         "Info - RI Lead Active"
    --#SUMMARY      "ATLAS 15400718: Received RI lead active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400718

adATLASV35NxRIInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the RI Lead is inactive."
    --#TYPE         "Info - RI Lead Inactive"
    --#SUMMARY      "ATLAS 15400719: Received RI lead inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400719

adATLASV35NxTDActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the presence of transistions on the TD lead."
    --#TYPE         "Info - TD Transitions Active"
    --#SUMMARY      "ATLAS 15400720: TD Transitions active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400720

adATLASV35NxTDInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the absence of transistions on the TD lead."
    --#TYPE         "Info - TD Transistions Inactive"
    --#SUMMARY      "ATLAS 15400721: TD Transistions inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400721

adATLASV35NxRDActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the presence of transistions on the RD Lead."
    --#TYPE         "Info - RD Transistions Active"
    --#SUMMARY      "ATLAS 15400722: RD Transistions active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400722

adATLASV35NxRDInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the absence of transistions on the RD Lead."
    --#TYPE         "Info - RD Transistions Inactive"
    --#SUMMARY      "ATLAS 15400723: RD Transistions inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400723

adATLASV35NxECActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the presence of transistions on the EC Lead."
    --#TYPE         "Info - EC Transistions Active"
    --#SUMMARY      "ATLAS 15400724: EC Transistions active "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400724

adATLASV35NxECInActive      TRAP-TYPE
    ENTERPRISE      adATLASmg
    VARIABLES {
        ifIndex,
        adATLASUnitSlotAddress,
        adATLASUnitPortAddress,
        adATLASModuleInfoFPStatus,
        adATLASUnitFPStatus,
        adATLASV35NxIfDTEStatus
    }
    DESCRIPTION
        "This trap indicates the absence of transistions on the EC Lead."
    --#TYPE         "Info - EC Transistions Inactive"
    --#SUMMARY      "ATLAS 15400725: EC Transistions inactive "
    --#SUMMARY      "for Line %d, Slot %d, Port %d, Module Status %d, "
    --#SUMMARY      "Box Status %d, DTE Lead Status %d"
    --#ARGUMENTS    {0,1,2,3,4,5}
    --#SEVERITY     INFORMATIONAL
    --#GENERIC      6
    --#CATEGORY     "Status Events"
    --#SOURCE_ID   "A"
    --#TIMEINDEX    0
    ::= 15400725

END