ADTRAN-ATLAS-T1-MIB DEFINITIONS ::= BEGIN -- TITLE: Atlas T1 MIB -- FILENAME: att1.mib -- PARTNUMBER: -- AUTHOR: Jason Schock -- HISTORY: -- 03/20/2002 Created. -- This MIB defines a generic ATLAS T1 interface. -- Note: The NxT1 HSSI cards do not support the following variables: -- adATLAST1TstRemoteLpBk -- adATLAST1TstRemoteLpBkStatus -- adATLAST1TstPattern -- adATLAST1TstPatternSync -- adATLAST1TstPatternSyncLost -- adATLAST1TstPatternESs -- adATLAST1TstPatternBESs -- adATLAST1TstPatternSESs -- adATLAST1TstClearResults -- adATLAST1TstInjectError -- The adATLAST1TstRemoteLpBk and adATLAST1TstRemoteLpBkStatus -- variables will be supported in a future release. IMPORTS enterprises, Gauge, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 ifIndex FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215 dsx1LineStatus FROM RFC1406-MIB adATLASModuleInfoFPStatus FROM ADTRAN-ATLAS-MODULE-MIB adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASUnitFPStatus FROM ADTRAN-ATLAS-UNIT-MIB; -- OBJECT IDENTIFIERS adtran OBJECT IDENTIFIER ::= { enterprises 664 } adMgmt OBJECT IDENTIFIER ::= { adtran 2 } adATLASmg OBJECT IDENTIFIER ::= { adMgmt 154 } adGenATLASmg OBJECT IDENTIFIER ::= { adATLASmg 1 } adATLAST1mg OBJECT IDENTIFIER ::= { adGenATLASmg 9 } adATLAST1IfNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of T1 ports (regardless of their current state) present on this system." ::= { adATLAST1mg 1} --___________________________________________________________ -- The Atlas T1 Interface Status Table --___________________________________________________________ adATLAST1IfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdATLAST1IfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Atlas T1 Interface Status Table" ::= { adATLAST1mg 2} adATLAST1IfEntry OBJECT-TYPE SYNTAX AdATLAST1IfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Atlas T1 Interface Status Table" INDEX { adATLAST1IfIndex } ::= { adATLAST1IfTable 1} AdATLAST1IfEntry ::= SEQUENCE { adATLAST1IfIndex INTEGER, adATLAST1IfSlotNum INTEGER, adATLAST1IfPortNum INTEGER, adATLAST1IfAlarmStatus INTEGER, adATLAST1IfRxLevel INTEGER, adATLAST1IfCurrentLOFC Counter, adATLAST1IfTotalLOFC Counter, adATLAST1IfResetPRMStats INTEGER } adATLAST1IfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table." ::= { adATLAST1IfEntry 1 } adATLAST1IfSlotNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the slot number of a particular ATLAS module with a T1 interface." ::= { adATLAST1IfEntry 2 } adATLAST1IfPortNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the port number of a particular T1 interface on an ATLAS module." ::= { adATLAST1IfEntry 3 } adATLAST1IfAlarmStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the status of each alarm by setting a bit. If the bit is set the alarm is active. Multiple bits can be set at one time. Bit # ALARM ------ ----- 0x01 LOS 0x02 Red 0x04 Yellow 0x08 Blue 0x10 DS0" ::= { adATLAST1IfEntry 4 } adATLAST1IfRxLevel OBJECT-TYPE SYNTAX INTEGER { zerodb (1), -- 0 db neg7pt5db (2), -- -7.5 db neg15db (3), -- -15 db neg22pt5db (4) -- -22.5 db } ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the recieved signal strength in dB." ::= { adATLAST1IfEntry 5 } adATLAST1IfCurrentLOFC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the value of the loss of frame count for the current 15 minute interval." ::= { adATLAST1IfEntry 6 } adATLAST1IfTotalLOFC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the value of the loss of frame count for the current 24 hours." ::= { adATLAST1IfEntry 7 } adATLAST1IfResetPRMStats OBJECT-TYPE SYNTAX INTEGER { reset (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable resets the performance monitoring statistics for all of the intervals: current, 15 min, and total." ::= { adATLAST1IfEntry 8 } --___________________________________________________________ -- The Atlas T1 Interface Interval Performance Table --___________________________________________________________ adATLAST1IfIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AdATLAST1IfIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Atlas T1 Interface Interval Performance Table" ::= { adATLAST1mg 3} adATLAST1IfIntervalEntry OBJECT-TYPE SYNTAX AdATLAST1IfIntervalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Atlas T1 Interface Interval Performance Table" INDEX { adATLAST1IfIntervalIndex, adATLAST1IfIntervalNumber } ::= { adATLAST1IfIntervalTable 1} AdATLAST1IfIntervalEntry ::= SEQUENCE { adATLAST1IfIntervalIndex INTEGER, adATLAST1IfIntervalNumber INTEGER, adATLAST1IfIntervalLOFC Counter } adATLAST1IfIntervalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table." ::= { adATLAST1IfIntervalEntry 1 } adATLAST1IfIntervalNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid)." ::= { adATLAST1IfIntervalEntry 2 } adATLAST1IfIntervalLOFC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The Loss of Frame Count encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals." ::= { adATLAST1IfIntervalEntry 3 } --___________________________________________________________ -- The Atlas T1 Interface DS0 Table --___________________________________________________________ adATLAST1IfDS0Table OBJECT-TYPE SYNTAX SEQUENCE OF AdATLAST1IfDS0Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Atlas T1 Interface DS0 Table" ::= { adATLAST1mg 4} adATLAST1IfDS0Entry OBJECT-TYPE SYNTAX AdATLAST1IfDS0Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Atlas T1 Interface DS0 Table" INDEX { adATLAST1IfDS0Index } ::= { adATLAST1IfDS0Table 1} AdATLAST1IfDS0Entry ::= SEQUENCE { adATLAST1IfDS0Index INTEGER, adATLAST1IfDS0Status OCTET STRING, adATLAST1IfDS0Alarm OCTET STRING, adATLAST1IfDS0RxSignalStatusA OCTET STRING, adATLAST1IfDS0RxSignalStatusB OCTET STRING, adATLAST1IfDS0TxSignalStatusA OCTET STRING, adATLAST1IfDS0TxSignalStatusB OCTET STRING } adATLAST1IfDS0Index OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table." ::= { adATLAST1IfDS0Entry 1 } adATLAST1IfDS0Status OBJECT-TYPE SYNTAX OCTET STRING (SIZE (24)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the overall status of each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 Unallocated 1 Inactive 2 Signalling Mismatch 3 Active B Channel 4 Active D Channel 5 Maintenance 6 Dedicated(Nailed) 7 Offhook-Originate(RBS) 8 Ringing(RBS)-Restart(ISDN) 9 Waiting Dialtone" ::= { adATLAST1IfDS0Entry 2 } adATLAST1IfDS0Alarm OBJECT-TYPE SYNTAX OCTET STRING ( SIZE (24)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the overall alarm status of each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different alarm states in each octet: Value(decimal) Alarm -------------- ------ 0 No Alarm 1 D Channel Alarm 2 Frame Alarm 3 TBOP Alarm 4 PPP Alarm" ::= { adATLAST1IfDS0Entry 3 } adATLAST1IfDS0RxSignalStatusA OBJECT-TYPE SYNTAX OCTET STRING (SIZE (24)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the status of the receive signal's A bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Port Not Active" ::= { adATLAST1IfDS0Entry 4 } adATLAST1IfDS0RxSignalStatusB OBJECT-TYPE SYNTAX OCTET STRING (SIZE (24)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the status of the receive signal's B bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Port Not Active" ::= { adATLAST1IfDS0Entry 5 } adATLAST1IfDS0TxSignalStatusA OBJECT-TYPE SYNTAX OCTET STRING (SIZE (24)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the status of the transmit signal's A bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Transparent 3 Port Not Active" ::= { adATLAST1IfDS0Entry 6 } adATLAST1IfDS0TxSignalStatusB OBJECT-TYPE SYNTAX OCTET STRING (SIZE (24)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the status of the transmit signal's B bit in each DS0. There are 24 octets, each corresponding to a single DS0. These are the values for the different status states in each octet: Value(decimal) Status -------------- ------ 0 0 1 1 2 Transparent 3 Port Not Active" ::= { adATLAST1IfDS0Entry 7 } --___________________________________________________________ -- The Atlas T1 Interface Test Table --___________________________________________________________ adATLAST1TstTable OBJECT-TYPE SYNTAX SEQUENCE OF AdATLAST1TstEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Atlas T1 Test Table" ::= { adATLAST1mg 5} adATLAST1TstEntry OBJECT-TYPE SYNTAX AdATLAST1TstEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the Atlas T1 Test Table" INDEX { adATLAST1TstIndex } ::= { adATLAST1TstTable 1} AdATLAST1TstEntry ::= SEQUENCE { adATLAST1TstIndex INTEGER, adATLAST1TstLocalLpBk INTEGER, adATLAST1TstRemoteLpBk INTEGER, adATLAST1TstRemoteLpBkStatus INTEGER, adATLAST1TstPattern INTEGER, adATLAST1TstPatternSync INTEGER, adATLAST1TstPatternSyncLost INTEGER, adATLAST1TstPatternESs Counter, adATLAST1TstPatternBESs Counter, adATLAST1TstPatternSESs Counter, adATLAST1TstClearResults INTEGER, adATLAST1TstInjectError INTEGER } adATLAST1TstIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the interface number of a particular T1 port within the ATLAS product. This number will be the same as the ifIndex located in the MIB-II interface table." ::= { adATLAST1TstEntry 1 } adATLAST1TstLocalLpBk OBJECT-TYPE SYNTAX INTEGER { none (1), payload (2), line (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable sets the status of the local loopback for sending test signals." ::= { adATLAST1TstEntry 2 } adATLAST1TstRemoteLpBk OBJECT-TYPE SYNTAX INTEGER { none (1), attInbandLine (2), ansiFDLLine (3), ansiFDLPayload (4), inbandNIU (5) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable sets the status of the remote loopback for sending test signals." ::= { adATLAST1TstEntry 3 } adATLAST1TstRemoteLpBkStatus OBJECT-TYPE SYNTAX INTEGER { noRemoteLoops (1), remLpUpStarted (2), remLpUpInProgress (3), remLpUpTimeout (4), remLpUpDone (5), remLpDwnStarted (6), remLpDwnInProgress (7), remLpDwnDone (8) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the current remote loopback status." ::= { adATLAST1TstEntry 4 } adATLAST1TstPattern OBJECT-TYPE SYNTAX INTEGER { none (1), allOnes (2), allZeros (3), qRSS (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable sets the pattern to be sent for testing." ::= { adATLAST1TstEntry 5 } adATLAST1TstPatternSync OBJECT-TYPE SYNTAX INTEGER { synced (1), noSync (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows whether there is sync between transmitting and recieving the test pattern." ::= { adATLAST1TstEntry 6 } adATLAST1TstPatternSyncLost OBJECT-TYPE SYNTAX INTEGER { syncLost (1), syncNotLost (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows whether sync has been lost since it was last cleared." ::= { adATLAST1TstEntry 7 } adATLAST1TstPatternESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the amount of errored seconds since it was last cleared." ::= { adATLAST1TstEntry 8 } adATLAST1TstPatternBESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the amount of bursty errored seconds since it was last cleared." ::= { adATLAST1TstEntry 9 } adATLAST1TstPatternSESs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This variable shows the amount of severely errored seconds since it was last cleared." ::= { adATLAST1TstEntry 10 } adATLAST1TstClearResults OBJECT-TYPE SYNTAX INTEGER { clear (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to clear the results of the test." ::= { adATLAST1TstEntry 11 } adATLAST1TstInjectError OBJECT-TYPE SYNTAX INTEGER { inject (1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to inject an error in the test pattern." ::= { adATLAST1TstEntry 12 } --______________________________________ -- Atlas Enterprise Specific T1 Traps -- --______________________________________ adATLAST1RxYellowActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a yellow alarm is being received." --#TYPE "Error - RX Yellow Alarm Active" --#SUMMARY "ATLAS 15400900: Received yellow alarm active for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400900 adATLAST1RxYellowInActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a yellow alarm is no longer being received." --#TYPE "Error - RX Yellow Alarm InActive" --#SUMMARY "ATLAS 15400901: Received yellow alarm inactive for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400901 adATLAST1RxAISActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates an alarm indication signal (AIS) is being received." --#TYPE "Error - RX AIS Alarm" --#SUMMARY "ATLAS 15400902: Received AIS active for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400902 adATLAST1RxAISInActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates an alarm indication signal (AIS) is no longer being received." --#TYPE "Error - RX AIS Alarm" --#SUMMARY "ATLAS 15400903: Received AIS inactive for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MINOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400903 adATLAST1RedAlarmActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a red alarm is active." --#TYPE "Error - RED Alarm" --#SUMMARY "ATLAS 15400904: Red alarm is active for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400904 adATLAST1RedAlarmInActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a red alarm is inactive." --#TYPE "Error - RED Alarm" --#SUMMARY "ATLAS 15400905: Red alarm is inactive for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400905 adATLAST1LOSActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a loss of signal (LOS) is active." --#TYPE "Error - Loss of Signal" --#SUMMARY "ATLAS 15400906: Loss of signal (LOS) is active for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400906 adATLAST1LOSInActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a loss of signal (LOS) is inactive." --#TYPE "Error - Loss of Signal" --#SUMMARY "ATLAS 15400907: Loss of signal (LOS) in inactive for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400907 adATLAST1TxAISActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates an alarm indication signal (LOS) is being sent." --#TYPE "Error - Loss of Signal" --#SUMMARY "ATLAS 15400908: (AIS) being transmitted from " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400908 adATLAST1TxAISInActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates an alarm indication signal (LOS) is no longer being sent." --#TYPE "Error - Loss of Signal" --#SUMMARY "ATLAS 15400909: (AIS) no longer being transmitted from " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400909 adATLAST1TxYellowActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a yellow alarm is being sent." --#TYPE "Error - Loss of Signal" --#SUMMARY "ATLAS 15400910: A yellow alarm is being transmitted from " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400910 adATLAST1TxYellowInActive TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates a yellow alarm is no longer being sent." --#TYPE "Error - Loss of Signal" --#SUMMARY "ATLAS 15400911: A yellow alarm is no longer being transmitted from " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Error Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400911 adATLAST1CurrentES TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval errored second threshold has been exceeded." --#TYPE "Threshold - Current Errored Seconds" --#SUMMARY "ATLAS 15400912: Current interval errored second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400912 adATLAST1CurrentSES TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval severely errored second threshold has been exceeded." --#TYPE "Threshold - Current Severely Errored Seconds" --#SUMMARY "ATLAS 15400913: Current interval severely errored second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400913 adATLAST1CurrentSEFS TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval severely errored framing second threshold has been exceeded." --#TYPE "Threshold - Current Severely Errored Framing Seconds" --#SUMMARY "ATLAS 15400914: Current interval severely errored framing second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400914 adATLAST1CurrentUAS TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval unavailable second threshold has been exceeded." --#TYPE "Threshold - Current unavailable Seconds" --#SUMMARY "ATLAS 15400915: Current interval unavailable second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400915 adATLAST1CurrentCSS TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval controlled slip second threshold has been exceeded." --#TYPE "Threshold - Current Controlled Slip Seconds" --#SUMMARY "ATLAS 15400916: Current interval controlled slip second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400916 adATLAST1CurrentPCV TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval path coding violations threshold has been exceeded." --#TYPE "Threshold - Current Path Code Violations" --#SUMMARY "ATLAS 15400917: Current interval path code violations threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400917 adATLAST1CurrentLES TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval line errored second threshold has been exceeded." --#TYPE "Threshold - Current Line Errored Seconds" --#SUMMARY "ATLAS 15400918: Current interval line errored second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400918 adATLAST1CurrentLCV TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the current interval line code violations threshold has been exceeded." --#TYPE "Threshold - Current Line Code Violations" --#SUMMARY "ATLAS 15400919: Current interval line code violations threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400919 adATLAST1TotalES TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total errored second threshold has been exceeded." --#TYPE "Threshold - Total Errored Seconds" --#SUMMARY "ATLAS 15400920: Total errored second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400920 adATLAST1TotalSES TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total severely errored second threshold has been exceeded." --#TYPE "Threshold - Total Severely Errored Seconds" --#SUMMARY "ATLAS 15400921: Total severely errored second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400921 adATLAST1TotalSEFS TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total severely errored framing second threshold has been exceeded." --#TYPE "Threshold - Total Severely Errored Framing Seconds" --#SUMMARY "ATLAS 15400922: Total severely errored framing second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400922 adATLAST1TotalUAS TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total unavailable second threshold has been exceeded." --#TYPE "Threshold - Total Unavailable Seconds" --#SUMMARY "ATLAS 15400923: Total unavailable second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY MAJOR --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400923 adATLAST1TotalCSS TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total controlled slip second threshold has been exceeded." --#TYPE "Threshold - Total Controlled Slip Seconds" --#SUMMARY "ATLAS 15400924: Total controlled slip second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400924 adATLAST1TotalPCV TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total path coding violations threshold has been exceeded." --#TYPE "Threshold - Total Path Code Violations" --#SUMMARY "ATLAS 15400925: Total path code violations threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400925 adATLAST1TotalLES TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total line errored second threshold has been exceeded." --#TYPE "Threshold - Total Line Errored Seconds" --#SUMMARY "ATLAS 15400926: Total line errored second threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400926 adATLAST1TotalLCV TRAP-TYPE ENTERPRISE adATLASmg VARIABLES { ifIndex, adATLASUnitSlotAddress, adATLASUnitPortAddress, adATLASModuleInfoFPStatus, adATLASUnitFPStatus, dsx1LineStatus } DESCRIPTION "This trap indicates that the total line code violations threshold has been exceeded." --#TYPE "Threshold - Total Line Code Violations" --#SUMMARY "ATLAS 15400927: Total line code violations threshold exceeded for " --#SUMMARY "Line %d, Slot %d, Port %d, Module Status %d, " --#SUMMARY "Box Status %d, Line Status %d" --#ARGUMENTS {0,1,2,3,4,5} --#SEVERITY WARNING --#GENERIC 6 --#CATEGORY "Threshold Events" --#SOURCE_ID "A" --#TIMEINDEX 0 ::= 15400927 END