ADTRAN-AOS-3G DEFINITIONS ::= BEGIN IMPORTS Unsigned32, Integer32, IpAddress, OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndex, ifIndex FROM IF-MIB adIdentity FROM ADTRAN-MIB adGenAOSConformance, adGenAOSWan FROM ADTRAN-AOS; adGenAOS3GMib MODULE-IDENTITY LAST-UPDATED "201001050000Z" ORGANIZATION "ADTRAN, Inc." CONTACT-INFO "Technical Support Dept. Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "A MIB module for monitoring 3G module values." REVISION "201001050000Z" -- Jan 5, 2010 / YYYYMMDDHHMMZ DESCRIPTION "Added TEXTUAL-CONVENTION EcioValue and object identifier adGenAOS3GECIOIntegerValue. Changes by Reba Holland." REVISION "201001140000Z" -- Jan 14, 2010 / YYYYMMDDHHMMZ DESCRIPTION "Changed syntax of object identifier adGenAOS3GECIOIntegerValue from EcioValue to Integer32. Removed TEXTUAL CONVENTION EcioValue. Changes by Reba Holland." ::= { adIdentity 10000 53 6 2 } -- OBJECT IDENTIFIER adGenAOS3G OBJECT IDENTIFIER ::= { adGenAOSWan 2 } --============================================================================ adGenAOS3GTraps OBJECT-IDENTITY STATUS current DESCRIPTION "The table contains traps/alarms caused by changes in configuration values and when statistical data reach certain thresholds." ::= { adGenAOS3G 0 } -- 3G Profile Details Entry adGenAOS3GTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOS3GEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains 3G cellular statistical data for the cellular interface." ::= { adGenAOS3G 1 } adGenAOS3GEntry OBJECT-TYPE SYNTAX AdGenAOS3GEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry into the 3G table." INDEX { ifIndex } ::= { adGenAOS3GTable 1 } AdGenAOS3GEntry ::= SEQUENCE { adGenAOS3GNetworkAccessID DisplayString, adGenAOS3GHASS BITS, adGenAOS3GHASPI Unsigned32, adGenAOS3GAAASS BITS, adGenAOS3GAAASPI Unsigned32, adGenAOS3GReverseTunneling BITS, adGenAOS3GHomeAddress IpAddress, adGenAOS3GPrimaryHomeAddress IpAddress, adGenAOS3GSecHomeAddress IpAddress, adGenAOS3GRSSI Integer32, adGenAOS3GECIO DisplayString, adGenAOS3GPnOffset Integer32, adGenAOS3GServiceType DisplayString, adGenAOS3GServiceTypePreference INTEGER, adGenAOS3GConnectionState DisplayString, adGenAOS3GECIOIntegerValue Integer32 } -- CID_CELLULAR_NETWORK_IDENTIFIER adGenAOS3GNetworkAccessID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Network Access ID is the User ID submitted by the 3G Modem during Mobile IP authentication. For more information, refer to RFC 4282." ::= { adGenAOS3GEntry 1 } -- CID_CELLULAR_HA_SS adGenAOS3GHASS OBJECT-TYPE SYNTAX BITS { unset(0), set(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This OID displays whether the shared secret for the home agent has been set for Mobile IP authentication." ::= { adGenAOS3GEntry 2 } -- CID_CELLULAR_HA_SPI adGenAOS3GHASPI OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Home Agent Security Parameter Index uniquely identifies a security association for the home agent for use during Mobile IP authentication." ::= { adGenAOS3GEntry 3 } -- CID_CELLULAR_AAA_SS adGenAOS3GAAASS OBJECT-TYPE SYNTAX BITS { unset(0), set(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This OID displays whether the shared secret for AAA has been set for Mobile IP authentication." ::= { adGenAOS3GEntry 4 } -- CID_CELLULAR_AAA_SPI adGenAOS3GAAASPI OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The AAA Security Parameter Index uniquely identifies a security association for AAA for use during Mobile IP authentication." ::= { adGenAOS3GEntry 5 } -- CID_CELLULAR_REVERSE_TUNNELING adGenAOS3GReverseTunneling OBJECT-TYPE SYNTAX BITS { unset(0), set(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This OID describes if a tunnel is setup from the 3G module's care of address to the home agent. A care of address is a temporary IP address for a mobile device." ::= { adGenAOS3GEntry 6 } -- CID_CELLULAR_HOME_ADDRESS adGenAOS3GHomeAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The permanent home IP address for the 3G module in the cellular network." ::= { adGenAOS3GEntry 7 } -- CID_CELLULAR_PRIMARY_HOME_ADDRESS adGenAOS3GPrimaryHomeAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The primary IP address of the 3G module's home agent." ::= { adGenAOS3GEntry 8 } -- CID_CELLULAR_SECONDARY_HOME_ADDRESS adGenAOS3GSecHomeAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary IP address of the 3G module's home agent." ::= { adGenAOS3GEntry 9 } -- CID_CELLULAR_RSSI adGenAOS3GRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Receive Signal Strength Indicator for the cellular connection. This value is a measurement of signal strength." ::= { adGenAOS3GEntry 10 } -- CID_CELLULAR_ECIO adGenAOS3GECIO OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Ec/Io for the cellular connection. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio." ::= { adGenAOS3GEntry 11 } -- CID_CELLULAR_BASE_STATION_LOCATION adGenAOS3GPnOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Pn Offset for the cellular connection. Base stations assigned to a particular frequency carrier operate at the same center frequency. The PN offset is used to distinguish base stations from one another." ::= { adGenAOS3GEntry 12 } -- CID_CELLULAR_SERVICE_TYPE adGenAOS3GServiceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current Cellular Service Type for the cellular connection." ::= { adGenAOS3GEntry 13 } -- CID_CELLULAR_CDMA_SERVICE_TYPE adGenAOS3GServiceTypePreference OBJECT-TYPE SYNTAX INTEGER { modeAUTO(4), mode1xRTT(9), mode1xEVDO(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current Cellular Service Type Preference for the cellular connection. Cellular Service Type can be forced to 1xRTT mode or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode which chooses the best available signal." ::= { adGenAOS3GEntry 14 } -- CID_CELLULAR_CONNECT_STATE adGenAOS3GConnectionState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current Connection State for the cellular connection." ::= { adGenAOS3GEntry 15 } -- CID_CELLULAR_ECIO adGenAOS3GECIOIntegerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Ec/Io for the cellular connection displayed in integer form. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio. EC/IO values typically are represented as a value with a decimal place. In this representation the value will be scaled by 10. Hence a value of 1.5 will be represented as 15." ::= { adGenAOS3GEntry 16 } --============================================================================ -- 3G Hardware Profile Detail Entries --============================================================================ adGenAOS3GHardwareDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOS3GHardwareDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains profile information for the 3G cellular interface." ::= { adGenAOS3G 2 } adGenAOS3GHardwareDataEntry OBJECT-TYPE SYNTAX AdGenAOS3GHardwareDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry into the 3G hardware data table." INDEX { ifIndex } ::= { adGenAOS3GHardwareDataTable 1 } AdGenAOS3GHardwareDataEntry ::= SEQUENCE { adGenAOS3GSystemID Unsigned32, adGenAOS3GNetworkID DisplayString, adGenAOS3GPrefferedRoamList Unsigned32, adGenAOS3GMobileDirNumber DisplayString, adGenAOS3GESN DisplayString, adGenAOS3GMobileStationID DisplayString, adGenAOS3GHardwareVersion DisplayString, adGenAOS3GFirmwareVersion DisplayString } -- CID_CELLULAR_SYSTEM_ID adGenAOS3GSystemID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The System Identification number is the identifier for a cellular network in a certain area." ::= { adGenAOS3GHardwareDataEntry 1 } -- CID_CELLULAR_NETWORK_ID adGenAOS3GNetworkID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Network Identification number identifies a subset of a particular SID corresponding to different networks." ::= { adGenAOS3GHardwareDataEntry 2 } -- CID_CELLULAR_PREFFERED_ROAMING_LIST adGenAOS3GPrefferedRoamList OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The PRL is a database of cell towers that the cellular modem can roam on. This OID specifies the current version of that database that is programmed onto the cellular modem." ::= { adGenAOS3GHardwareDataEntry 3 } -- CID_CELLULAR_MOBILE_DIRECTORY_NUMBER adGenAOS3GMobileDirNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MDN is the 10 digit phone number assigned to the 3G module." ::= { adGenAOS3GHardwareDataEntry 4 } -- CID_CELLULAR_ELECTRONIC_SERIAL_NUMBER adGenAOS3GESN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Electronic Serial Number is is a unique number that identifies the 3G module." ::= { adGenAOS3GHardwareDataEntry 5 } -- CID_CID_CELLULAR_MOBILE_STATION_ID adGenAOS3GMobileStationID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MSID is a 10 digit number that identifies the 3G module in the network." ::= { adGenAOS3GHardwareDataEntry 6 } -- CID_CELLULAR_HARDWARE_VERSION adGenAOS3GHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware version of the 3G modem." ::= { adGenAOS3GHardwareDataEntry 7 } -- CID_CELLULAR_FIRMWARE_VERSION adGenAOS3GFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware version of the 3G modem." ::= { adGenAOS3GHardwareDataEntry 8 } --============================================================================ -- 3G Threshold Entries --============================================================================ adGenAOS3GThresholdDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOS3GThresholdDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains settings regarding whether the trap is enabled and threshold values for certain traps." ::= { adGenAOS3G 3 } adGenAOS3GThresholdDataEntry OBJECT-TYPE SYNTAX AdGenAOS3GThresholdDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an entry into the 3G threshold data table." INDEX { ifIndex } ::= { adGenAOS3GThresholdDataTable 1 } AdGenAOS3GThresholdDataEntry ::= SEQUENCE { adGenAOS3GEnableTraps INTEGER, adGenAOS3GRSSIThreshold Integer32, adGenAOS3GECIOThreshold Integer32 } -- CID_THRESHOLD_CROSSED_TRAP_ENA adGenAOS3GEnableTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1),disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This OID indicates whether traps are enabled for the interface." ::= { adGenAOS3GThresholdDataEntry 1 } -- CID_CELLULAR_RSSI_THRESHOLD adGenAOS3GRSSIThreshold OBJECT-TYPE SYNTAX Integer32 (-200..200) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a value from (-200..200) that sets the threshold for an RSSI trap to occur. When the RSSI is below this value, it will cause an RSSI alarm trap. When the RSSI rises above this value, it will cause an RSSI cleared trap." ::= { adGenAOS3GThresholdDataEntry 2 } -- CID_CELLULAR_ECIO_THRESHOLD adGenAOS3GECIOThreshold OBJECT-TYPE SYNTAX Integer32 (-200..200) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a value from (-200..200) that sets the threshold for an ECIO trap to occur. When the ECIO is below this value, it will cause an ECIO alarm trap. When the ECIO rises above this value, it will cause an ECIO cleared trap." ::= { adGenAOS3GThresholdDataEntry 3 } --============================================================================ -- Traps for 3G Interface --============================================================================ rssiDataRangeAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, adGenAOS3GRSSI } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that the RSSI data value object for the 3G cellular interface has exceeded the range specified by the user." ::= { adGenAOS3GTraps 1 } ecioDataRangeAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, adGenAOS3GECIO } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that the ECIO data value object for the 3G cellular interface has exceeded the range specified by the user." ::= { adGenAOS3GTraps 2 } rssiDataRangeClear NOTIFICATION-TYPE OBJECTS { ifIndex, adGenAOS3GRSSI } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that the RSSI data value object for the 3G cellular interface has returned to the range specified by the user." ::= { adGenAOS3GTraps 3 } ecioDataRangeClear NOTIFICATION-TYPE OBJECTS { ifIndex, adGenAOS3GECIO } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that the ECIO data value object for the 3G cellular interface has returned to the range specified by the user." ::= { adGenAOS3GTraps 4 } configValueSet NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that a data value object for the 3G cellular interface from the 3G Hardware Table has been modified from the previous state." ::= { adGenAOS3GTraps 5 } modemResetAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that the 3G modem has been reset." ::= { adGenAOS3GTraps 6 } serviceTypeChangeAlarm NOTIFICATION-TYPE OBJECTS { ifIndex, adGenAOS3GServiceType } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that the service type for the 3G cellular interface has changed." ::= { adGenAOS3GTraps 7} connectionStateDownAlarm NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS current DESCRIPTION "This trap signifies that the SNMP entity, acting in an agent role, has detected that the connection status of the modem has gone down from either DORMANT or a CONNECTED state." ::= { adGenAOS3GTraps 8} -- -- MIB Compliance statements. -- adGenAOS3GConformance OBJECT IDENTIFIER ::= { adGenAOSConformance 9 } adGenAOS3GGroup OBJECT IDENTIFIER ::= { adGenAOS3GConformance 1 } adGenAOS3GCompliances OBJECT IDENTIFIER ::= { adGenAOS3GConformance 2 } -- Full compliance statement adGenAOS3GFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement version 2 of the adGenAOS3G MIB." MODULE -- this module MANDATORY-GROUPS { adGenAOS3GTableGroup } GROUP adGenAOS3GHardwareDataGroup DESCRIPTION "This optional group is used to retrieve hardware profile statistics for a 3G interface module. Availability of data is dependent upon configuration and interface activity." GROUP adGenAOS3GThresholdDataGroup DESCRIPTION "This optional group is used to retrieve threshold data for the 3g interface. Availability of data is dependent upon configuration and interface activity." GROUP adGenAOS3GTrapGroup DESCRIPTION "This optional group defines the asynchronous notifications generated by the 3G interface." ::= { adGenAOS3GCompliances 1 } -- units of conformance adGenAOS3GTableGroup OBJECT-GROUP OBJECTS { adGenAOS3GNetworkAccessID, adGenAOS3GHASS, adGenAOS3GHASPI, adGenAOS3GAAASS, adGenAOS3GAAASPI, adGenAOS3GReverseTunneling, adGenAOS3GHomeAddress, adGenAOS3GPrimaryHomeAddress, adGenAOS3GSecHomeAddress, adGenAOS3GRSSI, adGenAOS3GECIO, adGenAOS3GPnOffset, adGenAOS3GServiceType, adGenAOS3GServiceTypePreference, adGenAOS3GConnectionState, adGenAOS3GECIOIntegerValue } STATUS current DESCRIPTION "This group contains 3G cellular statistical data for profile information." ::= { adGenAOS3GGroup 1 } adGenAOS3GHardwareDataGroup OBJECT-GROUP OBJECTS { adGenAOS3GSystemID, adGenAOS3GNetworkID, adGenAOS3GPrefferedRoamList, adGenAOS3GMobileDirNumber, adGenAOS3GESN, adGenAOS3GMobileStationID, adGenAOS3GHardwareVersion, adGenAOS3GFirmwareVersion } STATUS current DESCRIPTION "This group contains 3G cellular statistical data for hardware information." ::= { adGenAOS3GGroup 2 } adGenAOS3GThresholdDataGroup OBJECT-GROUP OBJECTS { adGenAOS3GEnableTraps, adGenAOS3GRSSIThreshold, adGenAOS3GECIOThreshold } STATUS current DESCRIPTION "This group contains threshold data for enabling 3G interface thresholds." ::= { adGenAOS3GGroup 3 } adGenAOS3GTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { rssiDataRangeAlarm, ecioDataRangeAlarm, rssiDataRangeClear, ecioDataRangeClear, configValueSet, modemResetAlarm, serviceTypeChangeAlarm, connectionStateDownAlarm } STATUS current DESCRIPTION "Traps which may be used to enhance event driven management of the interface." ::= { adGenAOS3GGroup 4 } END