ADTRAN-ACTDAX-MIB DEFINITIONS ::= BEGIN -- TITLE: ACTDAX List 2 Product MIB (1150.032L2) -- FILENAME: ACTDAX.MIB -- PARTNUMBER: 9950.017L1-16A -- AUTHOR: Stacy Murphree / Jeff Wells -- DATE: 94/11/10 -- This MIB defines the management information for the ACTDAX -- List 2 product. The ACTDAX is a T1 LIU controller for the -- ACT1241 Channel Bank. IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString,snmp FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215 dsx1LineStatus FROM RFC1406-MIB adDS1AlarmIndex,adDS1LineEvent, adDS1AlertIndex,adDS1CurrentAlert, adDS1TotalAlert,adDS1FarCurrentAlert, adDS1FarTotalAlert FROM ADTRAN-DS1-MIB; -- OBJECT IDENTIFIERS adtran OBJECT IDENTIFIER ::= { enterprises 664 } adProducts OBJECT IDENTIFIER ::= { adtran 1 } adACTDAX OBJECT IDENTIFIER ::= { adProducts 2 } adMgmt OBJECT IDENTIFIER ::= { adtran 2 } adACTDAXmg OBJECT IDENTIFIER ::= { adMgmt 2 } adACTDAXconfig OBJECT IDENTIFIER ::= { adACTDAXmg 1 } -- -- The ACTDAX List 2 Configuration Group -- adACTDAXpassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The password string used for authentication of SNMP messages between Proxy Agent and ACTDAX." ::= { adACTDAXconfig 1 } adACTDAXtime OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The current ACTDAX time value. A sequence of ASCII characters encoded as HR-Hour, MN-Minute, SC-Second. For example, HRMNSC = 123059." ::= { adACTDAXconfig 2 } adACTDAXdate OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The current ACTDAX date value. A sequence of ASCII characters encoded as MN-Month, DY-Day, YR-Year. For example, MNDYYR = 073193." ::= { adACTDAXconfig 3 } adACTDAXresetPM OBJECT-TYPE SYNTAX INTEGER { resAll(1), resDS1A(2), resDS1B(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Resets Performance Monitor DS1 statistic counters in ACTDAX. Parameter value 1 resets all lines, 2 resets line 1 (DS1-A), 3 resets line 2 (DS1-B)." ::= { adACTDAXconfig 4 } adACTDAXphone OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The dialing sequence (phone number) to reach the network manager." ::= { adACTDAXconfig 5 } adACTDAXselfTestA OBJECT-TYPE SYNTAX INTEGER { selfTestAoff(1), selfTestAon(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Perform local loopback self-test on DS1 line A." ::= { adACTDAXconfig 6 } adACTDAXtestStatusA OBJECT-TYPE SYNTAX INTEGER { noTestA(1), runTestA(2), passTestA(3), failTestA(4) } ACCESS read-write STATUS mandatory DESCRIPTION " Local loopback self-test status for DS1 line A." ::= { adACTDAXconfig 7 } adACTDAXselfTestB OBJECT-TYPE SYNTAX INTEGER { selfTestBoff(1), selfTestBon(2) } ACCESS read-write STATUS mandatory DESCRIPTION " Perform local loopback self-test on DS1 line B." ::= { adACTDAXconfig 8 } adACTDAXtestStatusB OBJECT-TYPE SYNTAX INTEGER { noTestB(1), runTestB(2), passTestB(3), failTestB(4) } ACCESS read-write STATUS mandatory DESCRIPTION " Local loopback self-test status for DS1 line B." ::= { adACTDAXconfig 9 } -- ACTDAX Trap Definitions -- Adtran products will send the Cold Start generic Trap message -- after completion of a power-up initialization sequence -- or after alteration of the product's SNMP configuration. -- If the ENTERPRISE clause is "snmp" the value of sysObjectID -- is placed in the enterprise field of the SNMP Trap-PDU and -- the specific-trap field is set to 0. For enterprise specific traps, -- the generic-trap field is set to 6 and the specific-trap field is -- set to the value of the TRAP-TYPE macro. The ENTERPRISE -- field uniquely identifies the product sending the trap. Where multiple -- products may send the same trap-type, a commented list appears -- after the ENTERPRISE value containing the product names. coldStart TRAP-TYPE ENTERPRISE snmp DESCRIPTION "A coldStart trap signifes that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered." ::= 0 -- Adtran DS1 Enterprise Specific Traps ds1Alarm TRAP-TYPE ENTERPRISE adACTDAX VARIABLES { adDS1AlarmIndex, adDS1LineEvent, dsx1LineStatus } DESCRIPTION "A DS1 Alarm Trap indicates a DS1 Line Status bit has changed state, producing an Alarm Event for the DS1 interface. The bit map Line Events variable identifies the alarm event(s). The bit map Line Status variable contains the interface status when the alarm occurred. Only enabled (arm set) status produce an Alarm Trap. Alarm event/status bit values: 1 No Alarm 2 Receive Yellow Alarm 4 Transmit Yellow Alarm 8 Receive Alarm Indication Signal (AIS) 16 Transmit AIS 32 RED Alarm 64 LOSS, Loss Of Receive Signal 128 Loopback 2048 Receive Test Code" ::= 201 ds1Alert TRAP-TYPE ENTERPRISE adACTDAX VARIABLES { adDS1AlertIndex, -- DS1 Line Number adDS1CurrentAlert, -- Current Alert value adDS1TotalAlert, -- Total Alert value adDS1FarCurrentAlert, -- Far End Current Alert value adDS1FarTotalAlert -- Far End Total Alert value } DESCRIPTION "A DS1 Threshold Crossing Alert has occurred. The Performance Parameters which have exceeded their Threshold Values are identified in the bit mapped Alert variables for the Near End and Far End DS1 interface. Parameters identify Alerts for the Current 15 minute interval and Total variables. Threshold Crossing Alert bit values: 1 ES - Errored Seconds 2 SES - Severely Errored Seconds 4 SEFS - Severely Errored Framing Seconds 8 UAS - Unavailable Second 16 CSS - Controlled Slip Seconds 32 PCV - Path Coding Violations 64 LES - Line Errored Seconds 128 BES - Bursty Errored Seconds 256 DM - Degraded Minutes 512 LCV - Line Code Violations" ::= 202 END