-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition

-- $Log: zyxel-AS.mib $
-- Revision 1.11  2004/05/05 08:33:35  jennyhsu
-- Revision 1.10  2004/01/29 03:41:26  jennyhsu
-- Define DHCP option 82 setting
-- Revision 1.9  2003/09/19 04:57:58  jennyhsu
-- Add thermalSensorFailure trap. Change the syntax of 
-- asDhcpRelayOption82Info to be DisplayString
-- Revision 1.8  2003/09/10 12:26:16  jennyhsu
-- add DHCP setup
-- Revision 1.7  2003/06/06 09:15:18  jennyhsu
-- Revise the descriptions of accessSwitchDSLConfTarget
-- Revision 1.6  2003/06/06 01:39:28  jennyhsu
-- Add objects for DSL configuration in batch mode
-- Revision 1.5  2003/05/27 08:12:45  jennyhsu
-- Add asPacketForwardingTable
-- Revision 1.4  2003/03/21 06:57:38  jennyhsu
-- remove the mask of accessSwitchSystemTemperature
-- Revision 1.3  2002/12/03 07:49:00  jennyhsu
-- Add accessSwitchSystemCurrentStatus into the variable binding of 
-- temp, fan and voltage trap
-- Revision 1.2  2002/11/12 07:48:00  jennyhsu
-- Revision 1.1  2002/11/12 07:40:49  jennyhsu
-- Initial revision


ZYXEL-accessSwitch-MIB DEFINITIONS ::= BEGIN

    IMPORTS
	enterprises		FROM RFC1155-SMI
	OBJECT-TYPE 		FROM RFC-1212	
	DisplayString, ifIndex  FROM RFC1213-MIB	  	
	TRAP-TYPE 		FROM RFC-1215
	PortList		FROM Q-BRIDGE-MIB
	RowStatus		FROM SNMPv2-TC;
	

	zyxel			OBJECT IDENTIFIER ::= { enterprises 890 }
	products		OBJECT IDENTIFIER ::= { zyxel 1 }
	accessSwitch  		OBJECT IDENTIFIER ::= { products 5 }
	
	-- accessSwitch generic managed objects
	accessSwitchCommon	OBJECT IDENTIFIER ::= { accessSwitch 1 }
	accessSwitchMgnt	OBJECT IDENTIFIER ::= { accessSwitchCommon 1 }
	
	
	-- accessSwitchMgnt subtree
	
	-- System Status	
	accessSwitchSystemCurrentStatus OBJECT-TYPE
    	SYNTAX  INTEGER(0..255)
    	ACCESS  read-only
    	STATUS  mandatory
    	DESCRIPTION "This variable indicates the status of the system.
       		     The sysCurrentStatus is a bit map represented
       		     as a sum, therefore, it can represent multiple defects
       		     simultaneously. The sysNoDefect should be set if and only if
       		     no other flag is set.

       		     The various bit positions are:
                     1   sysNoDefect
             	     2   sysOverHeat
		     3	 sysFanRpmLow
		     4	 sysVoltageLow
		     5   sysThermalSensorFailure"
     	::= { accessSwitchMgnt 1 }
	
	-- System traps related managed objects
	
	accessSwitchProblemCause	OBJECT-TYPE
        SYNTAX	DisplayString 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
               		"The variable is the description of sytsem problem."
     	::= { accessSwitchMgnt 2 }
     	
     	-- For AES-100, IES-1000 (SAM1008, AAM1008) only
 	accessSwitchSystemTemperature	OBJECT-TYPE
        SYNTAX	DisplayString 
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
              		"The variable is the current temperature in Celsius of the system."
     	::= { accessSwitchMgnt 3 }


	-- Fan rpm table

        accessSwitchFanRpmTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AccessSwitchFanRpmEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                      	"A table that contains rpm information about the fans."
        ::= { accessSwitchMgnt 4 }

        accessSwitchFanRpmEntry OBJECT-TYPE
        SYNTAX  AccessSwitchFanRpmEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
        		"A list of rpm information for each fan."
        INDEX  { accessSwitchFanRpmIndex }
        ::= { accessSwitchFanRpmTable 1 }

        AccessSwitchFanRpmEntry ::=
           SEQUENCE {
        	accessSwitchFanRpmIndex		INTEGER,
		accessSwitchFanRpmCurValue	INTEGER,
		accessSwitchFanRpmMaxValue	INTEGER,
		accessSwitchFanRpmMinValue	INTEGER,
		accessSwitchFanRpmLowThresh	INTEGER,
		accessSwitchFanRpmDescr		DisplayString
           }

        accessSwitchFanRpmIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The identity of the fan."
        ::= { accessSwitchFanRpmEntry 1 }

        accessSwitchFanRpmCurValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The current rpm of the fan."
        ::= { accessSwitchFanRpmEntry 2 }

        accessSwitchFanRpmMaxValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The maximum rpm ever performed by the fan."
        ::= { accessSwitchFanRpmEntry 3 }

        accessSwitchFanRpmMinValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The minimum rpm ever performed by the fan."
        ::= { accessSwitchFanRpmEntry 4 }

        accessSwitchFanRpmLowThresh OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The low threshold of the rpm of the fan. If the current rpm is less than
			the threshold, the device will initiate the fanRpmLow trap."
        ::= { accessSwitchFanRpmEntry 5 }

        accessSwitchFanRpmDescr OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The description of the fan (e.g. location, function, etc.)."
        ::= { accessSwitchFanRpmEntry 6 }


	-- Voltage table

        accessSwitchVoltageTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AccessSwitchVoltageEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                      	"A table that contains voltage information about the system."
        ::= { accessSwitchMgnt 5 }

        accessSwitchVoltageEntry OBJECT-TYPE
        SYNTAX  AccessSwitchVoltageEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
        		"A list of voltage information for each sensor."
        INDEX  { accessSwitchVoltageIndex }
        ::= { accessSwitchVoltageTable 1 }

        AccessSwitchVoltageEntry ::=
           SEQUENCE {
        	accessSwitchVoltageIndex		INTEGER,
		accessSwitchVoltageCurValue		INTEGER,
		accessSwitchVoltageMaxValue		INTEGER,
		accessSwitchVoltageMinValue		INTEGER,
		accessSwitchVoltageNominalValue		INTEGER,
		accessSwitchVoltageLowThresh		INTEGER,
		accessSwitchVoltageDescr		DisplayString
           }

        accessSwitchVoltageIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The identity of the sensor."
        ::= { accessSwitchVoltageEntry 1 }

        accessSwitchVoltageCurValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The current voltage detected by the sensor (in milli-voltage)."
        ::= { accessSwitchVoltageEntry 2 }

        accessSwitchVoltageMaxValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The maximum voltage ever detected by the sensor (in milli-voltage)."
        ::= { accessSwitchVoltageEntry 3 }

        accessSwitchVoltageMinValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The minimum voltage ever detected by the sensor (in milli-voltage)."
        ::= { accessSwitchVoltageEntry 4 }

        accessSwitchVoltageNominalValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The nominal voltage which the power should supply (in milli-voltage)."
        ::= { accessSwitchVoltageEntry 5 }

        accessSwitchVoltageLowThresh OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The low threshold of the voltage. If the current voltage is less than
			the threshold, the device will initiate the voltageLow trap."
        ::= { accessSwitchVoltageEntry 6 }

        accessSwitchVoltageDescr OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The description of the voltage (e.g. location, nominal value, etc.)."
        ::= { accessSwitchVoltageEntry 7 }

    
	-- System temperature table

        accessSwitchSysTempTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AccessSwitchSysTempEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                      	"A table that contains temperature information about system."
        ::= { accessSwitchMgnt 6 }

        accessSwitchSysTempEntry OBJECT-TYPE
        SYNTAX  AccessSwitchSysTempEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
        		"A list of temperature information for each sensor."
        INDEX  { accessSwitchSysTempIndex }
        ::= { accessSwitchSysTempTable 1 }

        AccessSwitchSysTempEntry ::=
           SEQUENCE {
        	accessSwitchSysTempIndex	INTEGER,
		accessSwitchSysTempCurValue	INTEGER,
		accessSwitchSysTempMaxValue	INTEGER,
		accessSwitchSysTempMinValue	INTEGER,
		accessSwitchSysTempHighThresh	INTEGER,
		accessSwitchSysTempDescr	DisplayString
           }

        accessSwitchSysTempIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The identity of the sensor."
        ::= { accessSwitchSysTempEntry 1 }

        accessSwitchSysTempCurValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The current temperature detected in Celsius by the sensor."
        ::= { accessSwitchSysTempEntry 2 }

        accessSwitchSysTempMaxValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The maximum temperature ever detected in Celsius by the sensor."
        ::= { accessSwitchSysTempEntry 3 }

        accessSwitchSysTempMinValue OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The minimum temperature ever detected in Celsius by the sensor."
        ::= { accessSwitchSysTempEntry 4 }

        accessSwitchSysTempHighThresh OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The high threshold of the temperature in Celsius. If the current temperature
			is higher than the threshold, the device will initiate the overheat trap."
        ::= { accessSwitchSysTempEntry 5 }

        accessSwitchSysTempDescr OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The description of the temperature sensor (e.g. location, function, etc.)."

        ::= { accessSwitchSysTempEntry 6 }

        accessSwitchMaintenance OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The managed object is for system maintenance. When the EMS
                      	 wants to trigger the system maitenance operation, the EMS
                      	 shall send SNMP-SET message to set the corresponding bit value 
                      	 to be 1. The various bit positions are:
                      	 BIT 1: config save
                      	 BIT 2: reset
			 BIT 3: local loopback test
			 BIT 4: remote loopback test"
        ::= { accessSwitchMgnt 7 }

        accessSwitchMaintenancePort OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The port which the maintenance operation should be performed on.
			 The value of 0 means the maintenance should be performed on the system."
        ::= { accessSwitchMgnt 8 }

        accessSwitchMaxNumOfStaticVlans OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The maximum number of static VLANs which the system supports"
        ::= { accessSwitchMgnt 9 }
 
-- Chassis information
        
        ASSlotNum ::= INTEGER {
		slot1(1),
		slot2(2)
	}
		
	ASModuleType ::= INTEGER {
		aes-100(1),
		aes-100-1(2),
		aam1008-61(3),
		aam1008-63(4), 
		sam1008(5)
	}
	
		
	acccessSwitchChassisId OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The chassis Id of the module"
        ::= { accessSwitchMgnt 10 }
        
        accessSwitchSlotId OBJECT-TYPE
        SYNTAX  ASSlotNum
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The slot Id of the module"
        ::= { accessSwitchMgnt 11 }
        
        accessSwitchModuleType OBJECT-TYPE
        SYNTAX  ASModuleType
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The type of the module"
        ::= { accessSwitchMgnt 12 }
        
               
        accessSwitchFWVersion OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The firmware version of the access switch."
        ::= { accessSwitchMgnt 13 }
        
        accessSwitchDriverVersion OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The driver version of the access port in this access switch"
        ::= { accessSwitchMgnt 14 }
        
        accessSwitchModemCodeVersion OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The modem code version of the access port in this access switch"
        ::= { accessSwitchMgnt 15 }
       
        -- variables for provisioning DSL line in batch mode
        
        accessSwitchDSLConfOps OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The managed object is for xDSL line configuration. When the EMS
                      	 wants to issue the desired operation, the EMS
                      	 shall send SNMP-SET message to set the corresponding bit value 
                      	 to be 1. The various bit positions are:
                      	 BIT 1: enable port
                      	 BIT 2: disable port
			 BIT 3: set DSL mode			 
			 BIT 4: set profile"
        ::= { accessSwitchMgnt 16 }

        accessSwitchDSLConfTarget OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The managed object is used for identify the target on which 
			 the line configuration should be performed. The target is encoded 
		         as:
		         Byte 1~4: reserved
		         Byte 5~7: each octet specifies a set of eight ports, with the first
		                   octet specifying ports 1 through 8, etc.
		         Byte 8~10: reserved"
        ::= { accessSwitchMgnt 17 }
        
        accessSwitchDSLConfProfileName OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The DSL profile name"
        ::= { accessSwitchMgnt 18 }
        
        accessSwitchDSLConfMode OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                      	"The DSL mode. The semantic for each bit is:
                      	Bit 1: ADSL, G.lite
                      	Bit 2: ADSL, G.dmt
                      	Bit 3: ADSL, T1.413
                      	Bit 4: ADSL, Auto"
        ::= { accessSwitchMgnt 19 }

	-- Packet Forwarding Table

        asPacketForwardingTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF AsPacketForwardingEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
        	"This table includes the configuration of packet forwarding."
        ::= { accessSwitchMgnt 20 }

	asPacketForwardingEntry OBJECT-TYPE
        SYNTAX	AsPacketForwardingEntry
        ACCESS	not-accessible
        STATUS	mandatory
        DESCRIPTION
		"An entry in asPacketForwardingTable."
        INDEX   { ifIndex }
        ::= { asPacketForwardingTable 1 }

        AsPacketForwardingEntry ::=
           SEQUENCE {
		asPacketForwardingPortList	PortList
           }

        asPacketForwardingPortList    OBJECT-TYPE
        SYNTAX	PortList
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "The list defines the ports to which the packets
		will be forwarded."
         ::= { asPacketForwardingEntry 1 }


	-- DHCP Setup

	asDhcpRelayEnable OBJECT-TYPE
         SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
          ACCESS  read-write
          STATUS  mandatory
          DESCRIPTION
                      	"Enable/disable DHCP relay function."
          ::= { accessSwitchMgnt 21 }

         asDhcpRelayOption82Enable OBJECT-TYPE
          SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
          ACCESS  read-write
          STATUS  mandatory
          DESCRIPTION
                        	"Enable/disable the relay agent information option."
          ::= { accessSwitchMgnt 22 }

         asDhcpRelayOption82Info OBJECT-TYPE
          SYNTAX  DisplayString
          ACCESS  read-write
          STATUS  mandatory
          DESCRIPTION
                      	"User specific relay agent information."
          ::= { accessSwitchMgnt 23 }

  	asMaxNumOfDhcpServers OBJECT-TYPE
         SYNTAX  INTEGER
         ACCESS  read-only
         STATUS  mandatory
          DESCRIPTION
                      	"The maximum number of DHCP servers."
          ::= { accessSwitchMgnt 24 }

	asDhcpServerTable OBJECT-TYPE
         SYNTAX  SEQUENCE OF AsDhcpServerEntry
          ACCESS  not-accessible
          STATUS  mandatory
         DESCRIPTION
                "A table that contains DHCP server information."
          ::= { accessSwitchMgnt 25 }

          asDhcpServerEntry OBJECT-TYPE
          SYNTAX  AsDhcpServerEntry
          ACCESS  not-accessible
          STATUS  mandatory
          DESCRIPTION
        		"The entry of DHCP server table."
          INDEX  { asDhcpServerIp }
          ::= { asDhcpServerTable 1 }

          AsDhcpServerEntry ::=
             SEQUENCE {
        	asDhcpServerIp		 	IpAddress,
		asDhcpServerRowStatus		RowStatus
           }
	
	asDhcpServerIp OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The IP address of the DHCP server."
	::= { asDhcpServerEntry 1 }

	asDhcpServerRowStatus OBJECT-TYPE
	SYNTAX 	RowStatus
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The row status of the DHCP server entry."
	::= { asDhcpServerEntry 2 }




	-- SNMP setup, Trap Destination
	
--	asMaxNumberOfTrapDestinations OBJECT-TYPE
--	SYNTAX INTEGER
--	ACCESS	read-only
--	STATUS	mandatory
--	DESCRIPTION
--		"The max number of the trap destinations."
--	::= { accessSwitchMgnt 26 }
--
--	asSNMPTrapDestTable	OBJECT-TYPE
-- 	SYNTAX  SEQUENCE OF AsSNMPTrapDestEntry
--    	ACCESS  not-accessible
--    	STATUS  mandatory
--    	DESCRIPTION
--              "A table that contains SNMP trap destination information."
--    	::= { accessSwitchMgnt 27 }

--    	asSNMPTrapDestEntry OBJECT-TYPE
--        SYNTAX  AsSNMPTrapDestEntry
--        ACCESS  not-accessible
--        STATUS  mandatory
--        DESCRIPTION
--        		"The entry of SNMP trap destination table."
--        INDEX  { asTrapDestIp, asTrapDestPort }
--        ::= { asSNMPTrapDestTable 1 }

--   	AsSNMPTrapDestEntry ::=
--           SEQUENCE {
--            asTrapDestIp		 	IpAddress,
--            asTrapDestPort			INTEGER,
--	    asTrapDestRowStatus			RowStatus
--    	   } 
           	
--	asTrapDestIp OBJECT-TYPE
--	SYNTAX IpAddress
--	ACCESS	read-write
--	STATUS	mandatory
--	DESCRIPTION
--		"The IP address of the trap destination."
--	::= { asSNMPTrapDestEntry 1 }


--	asTrapDestPort OBJECT-TYPE
--	SYNTAX INTEGER
--	ACCESS	read-write
--	STATUS	mandatory
--	DESCRIPTION
--		"The UDP port of the trap destination."
--	::= { asSNMPTrapDestEntry 2 }
	
--	asTrapDestRowStatus OBJECT-TYPE
--	SYNTAX 	RowStatus
--	ACCESS	read-write
--	STATUS	mandatory
--	DESCRIPTION
--		"The row status of the trap destination entry."
--	::= { asSNMPTrapDestEntry 3}




         
-- RADIUS Server setup
	
	asMaxNumberOfRadiusServers OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The max number of the RADIUS Servers."
	::= { accessSwitchMgnt 28 }

	asRadiusServerTable	OBJECT-TYPE
   	SYNTAX  SEQUENCE OF AsRadiusServerEntry
    	ACCESS  not-accessible
    	STATUS  mandatory
    	DESCRIPTION
                "A table that contains Radius Server information."
    	::= { accessSwitchMgnt 29 }

    	asRadiusServerEntry OBJECT-TYPE
        SYNTAX  AsRadiusServerEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
        		"The entry of Radius Server table."
        INDEX  { asRadiusServerIndex }
        ::= { asRadiusServerTable 1 }

   	AsRadiusServerEntry ::=
           SEQUENCE {
            asRadiusServerIndex			INTEGER,
            asRadiusServerIp		 	IpAddress,
            asRadiusServerPort			INTEGER,
            asRadiusSharedSecret		DisplayString,
	    asRadiusServerRowStatus		RowStatus
    	   } 
        
        asRadiusServerIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                      	"The identity of the RADIUS server."
        ::= { asRadiusServerEntry 1 }
        
	asRadiusServerIp OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The IP address of the Radius Server."
	::= { asRadiusServerEntry 2 }


	asRadiusServerPort OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The UDP port of the Radius Server."
	::= { asRadiusServerEntry 3 }
	
	asRadiusSharedSecret OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The shared secret of the Radius Server."
	::= { asRadiusServerEntry 4 }
	
	asRadiusServerRowStatus OBJECT-TYPE
	SYNTAX 	RowStatus
	ACCESS	read-write
	STATUS	mandatory
	DESCRIPTION
		"The row status of the Radius Server entry."
	::= { asRadiusServerEntry 5 } 
         
         
         
         
-- 802.1x option
	
	asDot1xEnable OBJECT-TYPE
	SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
        ACCESS  read-write
	STATUS	mandatory
	DESCRIPTION
		"Enable/disable the 802.1x function."
	::= { accessSwitchMgnt 30 } 
         
         

-- 802.1x Table

        asDot1xPortTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF AsDot1xPortEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
        	"This table includes the configuration of 802.1x."
        ::= { accessSwitchMgnt 31 }

	asDot1xPortEntry OBJECT-TYPE
        SYNTAX	AsDot1xPortEntry
        ACCESS	not-accessible
        STATUS	mandatory
        DESCRIPTION
		"An entry in asDot1xPortTable."
        INDEX   { ifIndex }
        ::= { asDot1xPortTable 1 }

        AsDot1xPortEntry ::=
           SEQUENCE {
		asDot1xPortEnable	  	INTEGER,
		asDot1xPortControl	  	INTEGER,
		asDot1xPortReAuthEnable		INTEGER,
		asDot1xPortReAuthPeriod		INTEGER
           }

        asDot1xPortEnable    OBJECT-TYPE
        SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "The option defines if the port enables 802.1x
		settings."
         ::= { asDot1xPortEntry 1 }
         
         asDot1xPortControl    OBJECT-TYPE
        SYNTAX  INTEGER {
				auto(1),
				forceAuth(2),
				forceUnAuth(3)
			}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "The configuration defines the 802.1x port control
		type."
         ::= { asDot1xPortEntry 2 }

	asDot1xPortReAuthEnable    OBJECT-TYPE
        SYNTAX  INTEGER {
				on(1),
				off(2)
			}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "The option defines if the port enables 802.1x
		re-authentication."
         ::= { asDot1xPortEntry 3 }
         
        asDot1xPortReAuthPeriod    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "The configuration defines the 802.1x
		re-authentication period for each port."
         ::= { asDot1xPortEntry 4 }
 
         
         
         
         
         
         
         

   -- accessSwitch specific traps
   
 	reboot	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that the system is going to reboot.
	                 The variable is the reason why the system reboots."
	::= 1
	
	systemShutdown	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchProblemCause 
                        }
	DESCRIPTION	"Send a message to the manager that the system is going to shutdown.
	                 The variable is the reason that causes the system to shutdown."
	::= 2
	    
	overheat	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchSysTempIndex,
                        accessSwitchSysTempCurValue,
                        accessSwitchSystemCurrentStatus 
                        }
	DESCRIPTION	"Send a message to the manager that the system is overheated.
	                 The variable in the binding list is the current temperature in Celsius 
	                 of the system."
	::= 3
		
	overheatOver	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchSysTempIndex,
                        accessSwitchSysTempCurValue,
                        accessSwitchSystemCurrentStatus
                        }
	DESCRIPTION	"Send a message to the manager that the overheated condition is over.
	                 The variable in the binding list is the current temperature in Celsius 
	                 of the system."
	::= 4

 	errLog		TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that an error log is created in system.
			The variable in the binding list is the content of the error log."
	::= 5	

	fanRpmLow	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchFanRpmIndex,
                        accessSwitchFanRpmCurValue,
                        accessSwitchSystemCurrentStatus 
                        }
	DESCRIPTION	"Send a message to the manager that the rpm of the fan is too low.
	                 The variable in the binding list is the current rpm of the fan."
	::= 6
		
	fanRpmNormal	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchFanRpmIndex,
                        accessSwitchFanRpmCurValue,
                        accessSwitchSystemCurrentStatus
                        }
	DESCRIPTION	"Send a message to the manager that the low-rpm condition of the fan is over.
	                 The variable in the binding list is the current rpm of the fan."
	::= 7

	voltageOutOfRange	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchVoltageIndex,
                        accessSwitchVoltageCurValue,
                        accessSwitchSystemCurrentStatus
                        }
	DESCRIPTION	"Send a message to the manager that the voltage of the system is out of range.
	                 The variable in the binding list is the current voltage in volt 
	                 of the system."
	::= 8
		
	voltageNormal	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchVoltageIndex,
                        accessSwitchVoltageCurValue,
                        accessSwitchSystemCurrentStatus
                        }
	DESCRIPTION	"Send a message to the manager that the low-voltage condition is over.
	                 The variable in the binding list is the current voltage in volt 
	                 of the system."
	::= 9
	
	systemMaintenanceFailure	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that the system maintence operation
	                 fail. The variable in the variable binding indicates the problem."
	::= 10	
	
	configChange	TRAP-TYPE
	ENTERPRISE	accessSwitch
        VARIABLES       { 
                        accessSwitchProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that the system configuration 
			data is changed."
	::= 11	
	
      	thermalSensorFailure TRAP-TYPE
	ENTERPRISE	accessSwitch
	VARIABLES	{
      			accessSwitchProblemCause	
      			}
      	DESCRIPTION	"The trap signifies that the thermal sensor failed."
      	::= 12		

END