XYLAN-FRAME-RELAY-MIB DEFINITIONS ::= BEGIN -- RCSID information -- $RCSfile: xylan-fr.mib,v $ -- $Revision: 1.8 $ $State: Exp $ -- $Date: 1997/04/15 16:26:51 $ -- $Author: fr $ -- xylan-fr.mib -- Revision: 0.01 -- Date: Jan. 13, 1996 -- Alcatel Internetworking, Inc. -- 26801 W. Agoura Road -- Calabasas, CA 91301 -- (818) 880-3500 -- support@ind.alcatel.com -- This module provides authoritative definitions for Alcatel Internetworking, Inc. -- enterprise-specific fr MIB. -- This module will be extended, as needed. -- Alcatel Internetworking, Inc. reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Alcatel Internetworking, -- Inc. to determine whether any such changes have been made. -- In no event shall Alcatel Internetworking, Inc. be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Alcatel Internetworking, -- Inc. has been advised of, known, or should have known, the -- possibility of such damages. -- Alcatel Internetworking, Inc. grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in connection -- with the management of Alcatel Internetworking, Inc. products. -- Copyright (C) 1996, Alcatel Internetworking, Inc. All Rights Reserved. -- plim 4/29/96, Added BPDU Stat entry to frxVcStatsEntry -- plim 5/31/96, Remove frxPortDefaultBridgingVcGrouping from frxPortTable -- plim 5/31/96, Added frxVcControlGroup frxVcControlBridgingInUse -- plim 6/25/96, remove page feed control character per spr 3164 -- plim 7/30/96, added 8025 and FDDI stats field -- plim 7/30/96, added BridgingMode flag in Service and Default objects -- plim 8/23/96, added new option for frxServiceAdminStatus to able to delete service IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB xylanFrArch FROM XYLAN-BASE-MIB ; -- Textual Conventions -- -- The MIB groups -- frxPortGroup OBJECT IDENTIFIER ::= { xylanFrArch 1 } frxVcControlGroup OBJECT IDENTIFIER ::= { xylanFrArch 2 } frxServiceGroup OBJECT IDENTIFIER ::= { xylanFrArch 3 } frxVcStatsGroup OBJECT IDENTIFIER ::= { xylanFrArch 4 } -- The Port Group -- The Port Table frxPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FrxPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of port layer status and parameter information for the UNI's physical interface." ::= { frxPortGroup 1 } frxPortEntry OBJECT-TYPE SYNTAX FrxPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the physical layer of a UNI interface." INDEX { frxPortSlotIndex, frxPortPortIndex } ::= { frxPortTable 1 } FrxPortEntry ::= SEQUENCE { frxPortSlotIndex INTEGER, frxPortPortIndex INTEGER, frxPortDescription DisplayString, frxPortDefaultBridgingVLAN INTEGER, frxPortDefaultBridgingServiceNumber INTEGER, frxPortDefaultRoutingVLAN INTEGER, frxPortDefaultCompressionAdminStatus INTEGER, frxPortDefaultCompressionPRetryTime INTEGER, frxPortDefaultCompressionPRetryCount INTEGER, frxPortDefaultBridgingMode INTEGER } frxPortSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..9) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this HSM board slot." ::= { frxPortEntry 1 } frxPortPortIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this WSM submodule port." ::= { frxPortEntry 2 } frxPortDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) ACCESS read-write STATUS mandatory DESCRIPTION "A description for this Frame Relay port." ::= { frxPortEntry 3 } frxPortDefaultBridgingVLAN OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The default VLAN for new PVCs that have not been configured for the Bridging Service. A value of zero(0) indicates that unconfigured VCs will not perform a bridging service and will discard all bridged format frames received or transmitted. A non-zero value indicates the bridging VLAN to be used if the network informs the port of a new VC." ::= { frxPortEntry 4 } frxPortDefaultBridgingServiceNumber OBJECT-TYPE SYNTAX INTEGER (0..256) ACCESS read-write STATUS mandatory DESCRIPTION "If non-zero, this is the unique service number which unconfigured Bridging Virtual Circuits are added to if frxPortDefaultBridgingVLAN is non zero (set to a VLAN ID) and frxPortDefaultBridgingGrouping is set to groupVCsIntoOneVport. This allows an unconfigured VC to be added to an existing configured bridging service virtual circuit group. If zero, then unconfigured VCs will be added to a newly created (dynamic) Briding Service instance (i.e. a new virtual port is created dynamically)." ::= { frxPortEntry 5 } frxPortDefaultRoutingVLAN OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The default VLAN for new PVCs that have not been configured for a routing Service. A value of zero(0) indicates that unconfigured VCs will not perform a routing service and will discard all routed format frames received or transmitted. A non-zero value indicates the routing VLAN to be used if the network informs the port of a new VC." ::= { frxPortEntry 6 } frxPortDefaultCompressionAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls whether or not an unconfigured virtual circuit will attempt (enable) or not attempt (disable) to negotiate for compression." ::= { frxPortEntry 7 } frxPortDefaultCompressionPRetryTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The default P-Retry-Time for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9. This object controls the default value for P-Retry-Time for an unconfigured (dynamic) virtual circuit. This object represents the time in seconds between retransmission of Data Compression Negotiation Control messages." ::= { frxPortEntry 8 } frxPortDefaultCompressionPRetryCount OBJECT-TYPE SYNTAX INTEGER (3..255) ACCESS read-write STATUS mandatory DESCRIPTION "The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object controls the default value for P-Retry-Count for an unconfigured (dynamic) virtual circuit. This object represents the number of retries before giving up on the negotiation phase and not running compression on the virtual circuit." ::= { frxPortEntry 9 } frxPortDefaultBridgingMode OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS mandatory DESCRIPTION "The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY" ::= { frxPortEntry 10 } -- Frame Relay-Virtual circuit control Table frxVcControlTable OBJECT-TYPE SYNTAX SEQUENCE OF FrxVcControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Frame Relay virtual circuit configuration and control information." ::= { frxVcControlGroup 1 } frxVcControlEntry OBJECT-TYPE SYNTAX FrxVcControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the Frame Relay virtual circuit statistics." INDEX { frxVcControlSlotIndex, frxVcControlPortIndex, frxVcControlDlci } ::= { frxVcControlTable 1 } FrxVcControlEntry ::= SEQUENCE { frxVcControlSlotIndex INTEGER, frxVcControlPortIndex INTEGER, frxVcControlDlci INTEGER, frxVcControlCompressionAdminStatus INTEGER, frxVcControlCompressionOperPhase INTEGER, frxVcControlCompressionPRetryTime INTEGER, frxVcControlCompressionPRetryCount INTEGER, frxVcControlBridgingInUse INTEGER } frxVcControlSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..9) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this HSM board slot." ::= { frxVcControlEntry 1 } frxVcControlPortIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this WSM submodule port." ::= { frxVcControlEntry 2 } frxVcControlDlci OBJECT-TYPE SYNTAX INTEGER (1..1024) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit." ::= { frxVcControlEntry 3 } frxVcControlCompressionAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls whether or not the virtual circuit will attempt (enable) or not attemp (disable) to negotiate for compression. The current state of compression for the virtual circuit is indicated in frxVcControlCompressionOperStatus" ::= { frxVcControlEntry 4 } frxVcControlCompressionOperPhase OBJECT-TYPE SYNTAX INTEGER { disabled(1), initialization(2), operation(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reports the current phase (state) of compression for this virtual circuit if the Compression Admin Status is set to enable. If the compression Admin status is set to disabled, then this object will report as disabled. Otherwise the value reflects whether compression is currently inactive or failed negotiation (disabled) is under negotiation (initialization) or active (operation). Possible causes of disabled are a failed negotiation, virtual circuit inactive, the other side not supporting compression, etc. For a description of the phases (states), see Frame Relay Forum Implementation aggreement on Data Compression (FRF.9)" ::= { frxVcControlEntry 5 } frxVcControlCompressionPRetryTime OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The default P-Retry-Time for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9. This object represents the time in seconds between retransmission of Data Compression Negotiation Control messages." ::= { frxVcControlEntry 6 } frxVcControlCompressionPRetryCount OBJECT-TYPE SYNTAX INTEGER (3..255) ACCESS read-write STATUS mandatory DESCRIPTION "The default P-Retry-Count for negotiating mode 1 compression as described in Frame Relay Forum Data Compression Implementation Agreement FRF.9 This object represents the number of retries before giving up on the negotiation phase and not running compression on the virtual circuit." ::= { frxVcControlEntry 7 } frxVcControlBridgingInUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Determine for NMS Manager to see whether VC is already in-use. 1=InUse, 0=Free." ::= { frxVcControlEntry 8 } -- The Service Group -- The Service Table frxServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF FrxServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Frame Relay services status and parameter information." ::= { frxServiceGroup 1 } frxServiceEntry OBJECT-TYPE SYNTAX FrxServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the Frame Relay services." INDEX { frxServiceSlotIndex, frxServicePortIndex, frxServiceNumber, frxServiceType } ::= { frxServiceTable 1 } FrxServiceEntry ::= SEQUENCE { frxServiceSlotIndex INTEGER, frxServicePortIndex INTEGER, frxServiceNumber INTEGER, frxServiceTableEntryType INTEGER, frxServiceDescription DisplayString, frxServiceType INTEGER, frxServiceOperStatus INTEGER, frxServiceAdminStatus INTEGER, frxServiceVirtualCircuits OCTET STRING, frxServiceVlans OCTET STRING, frxServiceBridgingMode INTEGER } frxServiceSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..9) ACCESS read-write STATUS mandatory DESCRIPTION "A unique value which identifies this HSM board slot." ::= { frxServiceEntry 1 } frxServicePortIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "A unique value which identifies this WSM submodule port." ::= { frxServiceEntry 2 } frxServiceNumber OBJECT-TYPE SYNTAX INTEGER (1..256) ACCESS read-only STATUS mandatory DESCRIPTION "The unique service number for this particular slot/port." ::= { frxServiceEntry 3 } frxServiceTableEntryType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of table entry for this Frame Relay Serivce. A static entry is one that is stored in non-volatile memory. A dynamic entry is one that is automatically created for an unconfigured virtual circuit based on the the type of service (bridging or routing) and whether a default VLAN is defined for the type of service. Changing the value via a write command from dynamic to static will cause the table entry to be stored into non-volatile memory. Setting a value of dynamic is not allowed." ::= { frxServiceEntry 4 } frxServiceDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) ACCESS read-write STATUS mandatory DESCRIPTION "A description for this Frame Relay service." ::= { frxServiceEntry 5 } frxServiceType OBJECT-TYPE SYNTAX INTEGER { trunking(4), routing(5), bridging(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The service type." ::= { frxServiceEntry 6 } frxServiceOperStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The service operational status." ::= { frxServiceEntry 7 } frxServiceAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), delete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The service adminstration status." ::= { frxServiceEntry 8 } frxServiceVirtualCircuits OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) ACCESS read-write STATUS mandatory DESCRIPTION "The virtual circuits for this service. Interpret this as a 16 bit field per connection: Trunking 1, Bridging 1..255, IP 1..255." ::= { frxServiceEntry 9 } frxServiceVlans OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, Bridging 1, IP 1" ::= { frxServiceEntry 10 } frxServiceBridgingMode OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS mandatory DESCRIPTION "The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY" ::= { frxServiceEntry 11 } -- Frame Relay-Virtual circuit statistics Table -- This table only monitors non Management DLCIs. DLCI 0 -- and 1023 are never accessable via this table. Only -- standard MIB access is allowed for those DLCIs. frxVcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrxVcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Frame Relay virtual circuit statistics information." ::= { frxVcStatsGroup 1 } frxVcStatsEntry OBJECT-TYPE SYNTAX FrxVcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the Frame Relay virtual circuit statistics." INDEX { frxVcStatsSlotIndex, frxVcStatsPortIndex, frxVcStatsDlci } ::= { frxVcStatsTable 1 } FrxVcStatsEntry ::= SEQUENCE { frxVcStatsSlotIndex INTEGER, frxVcStatsPortIndex INTEGER, frxVcStatsDlci INTEGER, frxVcStatsTxIPOctets Counter, frxVcStatsTxIPFrames Counter, frxVcStatsRxIPOctets Counter, frxVcStatsRxIPFrames Counter, frxVcStatsTxIPXOctets Counter, frxVcStatsTxIPXFrames Counter, frxVcStatsRxIPXOctets Counter, frxVcStatsRxIPXFrames Counter, frxVcStatsTxBPDUOctets Counter, frxVcStatsTxBPDUFrames Counter, frxVcStatsRxBPDUOctets Counter, frxVcStatsRxBPDUFrames Counter, frxVcStatsTxEthernetOctets Counter, frxVcStatsTxEthernetFrames Counter, frxVcStatsRxEthernetOctets Counter, frxVcStatsRxEthernetFrames Counter, frxVcStatsTx8025Octets Counter, frxVcStatsTx8025Frames Counter, frxVcStatsRx8025Octets Counter, frxVcStatsRx8025Frames Counter, frxVcStatsTxFDDIOctets Counter, frxVcStatsTxFDDIFrames Counter, frxVcStatsRxFDDIOctets Counter, frxVcStatsRxFDDIFrames Counter, frxVcStatsTxCompressedOctets Counter, frxVcStatsTxCompressedFrames Counter, frxVcStatsRxCompressedOctets Counter, frxVcStatsRxCompressedFrames Counter, frxVcStatsTxPrecompressedOctets Counter, frxVcStatsRxDecompressedOctets Counter, frxVcStatsRxCompressedDiscards Counter } frxVcStatsSlotIndex OBJECT-TYPE SYNTAX INTEGER (1..9) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this HSM board slot." ::= { frxVcStatsEntry 1 } frxVcStatsPortIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this WSM submodule port." ::= { frxVcStatsEntry 2 } frxVcStatsDlci OBJECT-TYPE SYNTAX INTEGER (1..1022) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit." ::= { frxVcStatsEntry 3 } frxVcStatsTxIPOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit." ::= { frxVcStatsEntry 4 } frxVcStatsTxIPFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted routed IP format frames on this virtual circuit." ::= { frxVcStatsEntry 5 } frxVcStatsRxIPOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit." ::= { frxVcStatsEntry 6 } frxVcStatsRxIPFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received routed IP format frames on this virtual circuit." ::= { frxVcStatsEntry 7 } frxVcStatsTxIPXOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit." ::= { frxVcStatsEntry 8 } frxVcStatsTxIPXFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted routed IPX format frames on this virtual circuit." ::= { frxVcStatsEntry 9 } frxVcStatsRxIPXOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit." ::= { frxVcStatsEntry 10 } frxVcStatsRxIPXFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received routed IPX format frames on this virtual circuit." ::= { frxVcStatsEntry 11 } frxVcStatsTxBPDUOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit." ::= { frxVcStatsEntry 12 } frxVcStatsTxBPDUFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted BPDU frames on this virtual circuit." ::= { frxVcStatsEntry 13 } frxVcStatsRxBPDUOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit." ::= { frxVcStatsEntry 14 } frxVcStatsRxBPDUFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received BPDU frames on this virtual circuit." ::= { frxVcStatsEntry 15 } frxVcStatsTxEthernetOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit." ::= { frxVcStatsEntry 16 } frxVcStatsTxEthernetFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted bridged 802.3 format frames on this virtual circuit." ::= { frxVcStatsEntry 17 } frxVcStatsRxEthernetOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit." ::= { frxVcStatsEntry 18 } frxVcStatsRxEthernetFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received bridged 802.3 format frames on this virtual circuit." ::= { frxVcStatsEntry 19 } frxVcStatsTx8025Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit." ::= { frxVcStatsEntry 20 } frxVcStatsTx8025Frames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted 8025 frames on this virtual circuit." ::= { frxVcStatsEntry 21 } frxVcStatsRx8025Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit." ::= { frxVcStatsEntry 22 } frxVcStatsRx8025Frames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received 8025 frames on this virtual circuit." ::= { frxVcStatsEntry 23 } frxVcStatsTxFDDIOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit." ::= { frxVcStatsEntry 24 } frxVcStatsTxFDDIFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted FDDI frames on this virtual circuit." ::= { frxVcStatsEntry 25 } frxVcStatsRxFDDIOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit." ::= { frxVcStatsEntry 26 } frxVcStatsRxFDDIFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received FDDI frames on this virtual circuit." ::= { frxVcStatsEntry 27 } frxVcStatsTxCompressedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted octets (including the Frame Relay Header field) within compressed format frames on this virtual circuit." ::= { frxVcStatsEntry 28 } frxVcStatsTxCompressedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of transmitted compressed format frames on this virtual circuit." ::= { frxVcStatsEntry 29 } frxVcStatsRxCompressedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received octets (including the Frame Relay Header field) within compressed format frames on this virtual circuit." ::= { frxVcStatsEntry 30 } frxVcStatsRxCompressedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received compressed format frames on this virtual circuit." ::= { frxVcStatsEntry 31 } frxVcStatsTxPrecompressedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets (including the Frame Relay Header field) prior to compression of data for transmission within compressed format frames on this virtual circuit." ::= { frxVcStatsEntry 32 } frxVcStatsRxDecompressedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets (including the Frame Relay Header field) after decompression of data received within compressed format frames on this virtual circuit." ::= { frxVcStatsEntry 33 } frxVcStatsRxCompressedDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received compressed format frames on this virtual circuit that were discarded due to error or lost frames (e.g. out of sequence, decompression errors, etc.)" ::= { frxVcStatsEntry 34 } END