XYLAN-ATM-CE-MIB DEFINITIONS ::= BEGIN

     --  RCSID information

     --  $RCSfile: xylan-ce.mib,v $
     --  $Revision: 1.8 $		$State: Exp $
     --  $Date: 1998/10/15 02:37:00 $
     --  $Author: ytran $

     --  xylan-ce.mib
     --  Revision: 1.00
     --  Date: October 22, 1996

     --  Alcatel Internetworking, Inc.
     --  26801 W. Agoura Road
     --  Calabasas, CA 91301
     --  (818) 880-3500
     --  support@ind.alcatel.com

     --  This module provides authoritative definitions for Alcatel Internetworking, Inc.
     --  enterprise-specific ATM Circuit Emulation MIB.

     --  This module will be extended, as needed.


     --  Alcatel Internetworking, Inc. reserves the right to make changes in 
     --  specification and other information contained in this document 
     --  without prior notice.  The reader should consult Alcatel Internetworking,
     --  Inc. to determine whether any such changes have been made.

     --  In no event shall Alcatel Internetworking, Inc. be liable for any incidental, 
     --  indirect, special, or consequential damages whatsoever (including 
     --  but not limited to lost profits) arising out of or related to this
     --  document or the information contained in it, even if Alcatel Internetworking,
     --  Inc. has been advised of, known, or should have known, the 
     --  possibility of such damages.
     --  Alcatel Internetworking, Inc. grants vendors, end-users, and other interested
     --  parties a non-exclusive license to use this Specification in connection
     --  with the management of Alcatel Internetworking, Inc. products.

     --  Copyright (C) 1996, Alcatel Internetworking, Inc. All Rights Reserved.

     
     	IMPORTS
		Counter
	         	FROM RFC1155-SMI
		OBJECT-TYPE
			FROM RFC-1212
                TRAP-TYPE
                        FROM RFC-1215
		DisplayString 
			FROM RFC1213-MIB
	        xylanAtmArch
			FROM XYLAN-BASE-MIB 
			;

        atmxCesGroup         OBJECT IDENTIFIER ::= { xylanAtmArch 10 }

	atmxCesMIBObjects    OBJECT IDENTIFIER ::= { atmxCesGroup 1 }

	atmxCesMIBTraps      OBJECT IDENTIFIER ::= { atmxCesGroup 2 }

        atmxCesService       OBJECT IDENTIFIER ::= { atmxCesMIBObjects 1 }

        atmxCesVccGroup      OBJECT IDENTIFIER ::= { atmxCesMIBObjects 2 }

	atmxCesVccStatsGroup OBJECT IDENTIFIER ::= { atmxCesMIBObjects 3 }

	atmxCesSvcConfigGroup OBJECT IDENTIFIER ::= { atmxCesMIBObjects 4 }

    -- The Service Table

        atmxCesServiceTable   OBJECT-TYPE
             SYNTAX   SEQUENCE OF AtmxCesServiceEntry
	     ACCESS   not-accessible
	     STATUS   mandatory
	     DESCRIPTION
                 "This table defines ATM circuit emulation service 
	          configuration."
             ::= { atmxCesService 1 }

        atmxCesServiceEntry  OBJECT-TYPE
             SYNTAX AtmxCesServiceEntry
             ACCESS not-accessible
             STATUS mandatory
             DESCRIPTION
                 "An entry in the table, containing information about
                  service configuration of a service interface."
             INDEX { atmxCesServiceSlotIndex, atmxCesServicePortIndex }
             ::= { atmxCesServiceTable 1 }

        AtmxCesServiceEntry ::= 
	     SEQUENCE {
                 atmxCesServiceSlotIndex
                     INTEGER,
	         atmxCesServicePortIndex
                     INTEGER,
                 atmxCesServiceDescription
                     DisplayString,
	         atmxCesServiceAdminStatus
	             INTEGER,
                 atmxCesServiceOperStatus
	             INTEGER,
                 atmxCesServiceServiceMode
                     INTEGER,
                 atmxCesServiceServiceClock
                     INTEGER,
		 atmxCesServiceAvailTimeSlot
	             OCTET STRING
	     }

         atmxCesServiceSlotIndex  OBJECT-TYPE
             SYNTAX   INTEGER (1..9)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this HSM board slot."
             ::= { atmxCesServiceEntry 1 }

         atmxCesServicePortIndex   OBJECT-TYPE
             SYNTAX   INTEGER (1..32)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this port."
             ::= { atmxCesServiceEntry 2 }

         atmxCesServiceDescription  OBJECT-TYPE
             SYNTAX   DisplayString (SIZE (0..31))
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "A description for this port."
             ::= {  atmxCesServiceEntry 3 }

         atmxCesServiceAdminStatus OBJECT-TYPE
             SYNTAX   INTEGER {
                        up(1),
                        down(2)
	              }
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The desired state of this interface."
             ::= { atmxCesServiceEntry 4 }

         atmxCesServiceOperStatus OBJECT-TYPE
             SYNTAX   INTEGER {
                        up(1),
                        down(2)
	              }
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The current operational state of this interface."
             ::= { atmxCesServiceEntry 5 }

         atmxCesServiceServiceMode OBJECT-TYPE
              SYNTAX INTEGER {
                     unstructured(1),
	             structured(2)
              } 
              ACCESS  read-write
	      STATUS  mandatory
              DESCRIPTION
		      "Define if this interface as structured or not.  A
                       structured(2) interface is some nx64 Kbps and passes
                       data bits and signalling bits through the ATM network.
	               An unstructured(2) passes all bits including framing
                       bits through the ATM network."
              ::= { atmxCesServiceEntry 6 }                  

        atmxCesServiceServiceClock OBJECT-TYPE
             SYNTAX  INTEGER {
                        synchronous(1),
	                srts(2),
	                adaptive(3)
                     }
	     ACCESS  read-write
	     STATUS  mandatory
             DESCRIPTION
                 "This object defines service clocking mode of this 
                  interface."
             ::= { atmxCesServiceEntry 7 }

	atmxCesServiceAvailTimeSlot   OBJECT-TYPE
	     SYNTAX  OCTET STRING(SIZE (32))
             ACCESS  read-only
	     STATUS  mandatory
             DESCRIPTION
                 "The availiable time slots of this interface.  Each octet
	          indicates an available time slot (1 to 32 decimal).  It's
	          terminated by an octet 0xFF if less than 32 time slots 
	          available."
	     ::= { atmxCesServiceEntry 8 }

     -- The Virtual Channel Connections Table

         atmxCesVccTable   OBJECT-TYPE
             SYNTAX   SEQUENCE OF AtmxCesVccEntry 
             ACCESS   not-accessible
             STATUS   mandatory
             DESCRIPTION
                "A table of ATM virtual channel connections status and 
                parameter information." 
                ::= { atmxCesVccGroup 1 }

         atmxCesVccEntry   OBJECT-TYPE
             SYNTAX   AtmxCesVccEntry
             ACCESS   not-accessible
             STATUS   mandatory
             DESCRIPTION
                "An entry in the table, containing information about 
                the ATM circuit emulation virtual channel connections."
             INDEX   { atmxCesVccSlotIndex, atmxCesVccPortIndex, 
	               atmxCesVccVci}
                ::= { atmxCesVccTable 1 }

         AtmxCesVccEntry ::=
             SEQUENCE {
                 atmxCesVccSlotIndex
                     INTEGER,
                 atmxCesVccPortIndex
                     INTEGER,
		 atmxCesVccVpi
		     INTEGER,
		 atmxCesVccVci
		     INTEGER,
                 atmxCesVccAtmUplinkSlotIndex
                     INTEGER,
                 atmxCesVccAtmUplinkPortIndex
                     INTEGER,
                 atmxCesVccDescription
                     DisplayString,
                 atmxCesVccAdminStatus 
                     INTEGER,
                 atmxCesVccOperStatus 
                     INTEGER,
                 atmxCesVccConnType
	             INTEGER,
	         atmxCesVccPartialFill
	             INTEGER,
	         atmxCesVccBufMaxSize   
	             INTEGER,
	         atmxCesVccCDVT
                     INTEGER,
                 atmxCesVccCellLossIntegrationPeriod
	             INTEGER,
	         atmxCesVccIdleCode
	             INTEGER,
                 atmxCesVccTimeSlots
	             OCTET STRING,
                 atmxCesVccAtmUplinkVccVpi
                     INTEGER,
                 atmxCesVccAtmUplinkVccVci
                     INTEGER,
	         atmxCesVccLocalAtmAddr
	             OCTET STRING
         }
                        
         atmxCesVccSlotIndex OBJECT-TYPE
             SYNTAX   INTEGER (1..9)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies the HSM board slot
	         of the service interface."
             ::= { atmxCesVccEntry 1 }

         atmxCesVccPortIndex OBJECT-TYPE
             SYNTAX   INTEGER (1..32)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies the service interface 
	         port."
             ::= { atmxCesVccEntry 2 }

	 atmxCesVccVpi OBJECT-TYPE
	     SYNTAX   INTEGER (0..128)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The virtual path identifier associated with this 
                 virtual connection."
             ::= { atmxCesVccEntry 3 }

	 atmxCesVccVci OBJECT-TYPE
	     SYNTAX   INTEGER (1..1023)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The virtual channel identifier associated with the 
                 virtual connection."
             ::= { atmxCesVccEntry 4 }

         atmxCesVccAtmUplinkSlotIndex OBJECT-TYPE
             SYNTAX   INTEGER (1..9)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies the HSM board slot
	         of the ATM uplink port."
             ::= { atmxCesVccEntry 5 }

         atmxCesVccAtmUplinkPortIndex OBJECT-TYPE
             SYNTAX   INTEGER (1..32)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies the the ATM uplink 
	         port."
             ::= { atmxCesVccEntry 6 }

         atmxCesVccDescription OBJECT-TYPE
             SYNTAX   DisplayString (SIZE (0..31))
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "A description for this virtual connection."
             ::= { atmxCesVccEntry 7 }

         atmxCesVccAdminStatus OBJECT-TYPE
             SYNTAX   INTEGER {
                        up(1),
                        down(2),
			delete(3)
	              }
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The desired state of this virtual circuit.  Status delete(3)
	         deletes the virtual circuit."
             ::= { atmxCesVccEntry 8 }

         atmxCesVccOperStatus OBJECT-TYPE
             SYNTAX   INTEGER {
                        up(1),
                        down(2)
	              }
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The current operational state of this virtual circuit."
             ::= { atmxCesVccEntry 9 }

	 atmxCesVccConnType OBJECT-TYPE
	     SYNTAX   INTEGER { 
                         other(1),
	                 pvc(2),
                         activeSvc(3),
	                 passiveSvc(4),
	                 initialSvc(5)
		     }
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The type of ATM connectivity between associated CES IWF's.
                 Valid values are:
                     other - none of the types specified below.
	             pvc   - supporting connectivity is permanent virtual
	                     connection.
	             activeSvc - attempt calls whenever non is established,
	             passiveSvc - accept calls.
	             initialSvc - attempt calls initially, but eventually 
                                  cease"
             ::= { atmxCesVccEntry 10 }

         atmxCesVccPartialFill OBJECT-TYPE
            SYNTAX INTEGER (0 .. 47)
            ACCESS read-write
	    STATUS mandatory
            DESCRIPTION
                "If partial cell fill is used, the number of user octets per
	         cell must be set with this parameter.  Setting this parameter
	         to zero disables partial cell fill, and causes all cells to
		 be completely filled before they are sent."
            ::= { atmxCesVccEntry 11 }

	 atmxCesVccBufMaxSize OBJECT-TYPE
             SYNTAX  INTEGER  (1..512)
 	     ACCESS  read-write
	     STATUS  mandatory
	     DESCRIPTION
	         "The maximum size of reassembly buffer in frames.  In
	          unstructured mode, a frame is 256 bits.  In structured
	          mode, a frame is number of time slots assigned to this 
                  virtual circuit.  For examples, if 5 time slots assigned
                  to this virtual circuit and this object is set to 50
	          then buffer size is 250 octets."
            ::= { atmxCesVccEntry 12 }

	atmxCesVccCDVT     OBJECT-TYPE
	     SYNTAX INTEGER (1..2400)
             ACCESS read-write
	     STATUS mandatory
             DESCRIPTION
	       "This object defines the maximum cell delay variation
                delay in frame increments that the reassembly process 
	        will tolerate in the cell stream without producing errors 
	        on the Circuit Emulation interface.  In structured mode, 
	        a frame equates to 125 microseconds in T1 or E1.  In 
	        unstructured mode, a frame equates to 256/rate seconds; where
	        rate is the line rate of the Circuit Emulation interface."
	    ::= { atmxCesVccEntry 13 }	     

	atmxCesVccCellLossIntegrationPeriod OBJECT-TYPE
	     SYNTAX INTEGER (1..64)
             ACCESS read-write
	     STATUS mandatory
	     DESCRIPTION
	        "The time in seconds for the cell loss integration
                 period.  If one of more cells is lost for this period of
	         time, then atmxCesVccCellLossStatus is set to loss(2)."
             ::= { atmxCesVccEntry 14 }	     

	atmxCesVccIdleCode   OBJECT-TYPE
	     SYNTAX INTEGER (0..'ff'h)
	     ACCESS read-write
	     STATUS mandatory
	     DESCRIPTION
	        "The idle character sent to service emulation interface
                 or to ATM uplink if data is not available."
             ::= { atmxCesVccEntry 15 }	     	     
 	     
        atmxCesVccTimeSlots    OBJECT-TYPE
	     SYNTAX OCTET STRING(SIZE (32))
	     ACCESS read-write
	     STATUS mandatory
	     DESCRIPTION
	        "The list of time slots configured for this virtual 
	         circuit.  Each octet indicates an available time slot 
	         (1 to 32 decimal).  It's terminated by an octet 0xFF 
	         if less than 32 time slots.  If this object only
                 contains octet 0xff then all free time slots of 
                 this port are assigned."
	     ::= { atmxCesVccEntry 16 }

	 atmxCesVccAtmUplinkVccVpi OBJECT-TYPE
	     SYNTAX   INTEGER (0..255)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The virtual path identifier associated with the
                 ATM uplink port's virtual connection."
             ::= { atmxCesVccEntry 17 }

	 atmxCesVccAtmUplinkVccVci OBJECT-TYPE
	     SYNTAX   INTEGER (1..65535)
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The virtual channel identifier associated with the 
                 ATM uplink port's virtual connection."
             ::= { atmxCesVccEntry 18 }

	 atmxCesVccLocalAtmAddr OBJECT-TYPE
	     SYNTAX   OCTET STRING(SIZE (20))
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "The ATM address of the local CES IWF process.
                 This object is a 20 bytes hex number."
             ::= { atmxCesVccEntry 19 }

	atmxCesVccStatsTable OBJECT-TYPE
             SYNTAX   SEQUENCE OF AtmxCesVccStatsEntry
	     ACCESS   not-accessible
	     STATUS   mandatory
	     DESCRIPTION
                 "The Circuit Emulation Service statistical data table for
                  virtual circuits."
             ::= { atmxCesVccStatsGroup 1 }

        atmxCesVccStatsEntry  OBJECT-TYPE
             SYNTAX AtmxCesVccStatsEntry
             ACCESS not-accessible
             STATUS mandatory
             DESCRIPTION
                 "An entry in the table, containing statistics of 
	          CES virtual connection."
             INDEX { atmxCesVccStatsSlotIndex, atmxCesVccStatsPortIndex,
	             atmCesVccStatsVci }
             ::= { atmxCesVccStatsTable 1 }

        AtmxCesVccStatsEntry ::= SEQUENCE {
	    atmxCesVccStatsSlotIndex
	         INTEGER,
	    atmxCesVccStatsPortIndex
	         INTEGER,
	    atmCesVccStatsVci
	         INTEGER,
	    atmxCesVccStatsTxDataCells
	        Counter,
	    atmxCesVccStatsTxCondCells
	        Counter,
	    atmxCesVccStatsSuppressedTxCells
	        Counter,
	    atmxCesVccStatsRxCells
	        Counter,
	    atmxCesVccStatsSnpErrors
	        Counter,
            atmxCesVccStatsSeqNumErrors
                Counter,
            atmxCesVccStatsDroppedRxCellUnderrun
	        Counter,
            atmxCesVccStatsDroppedRxCellOverrun
	        Counter,
	    atmxCesVccStatsCellLossStatus
	        INTEGER
          }

       atmxCesVccStatsSlotIndex OBJECT-TYPE
	     SYNTAX   INTEGER (1..9)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this HSM board slot."
	     ::= { atmxCesVccStatsEntry 1 }
	   
	atmxCesVccStatsPortIndex OBJECT-TYPE
             SYNTAX   INTEGER (1..32)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this port."
             ::= { atmxCesVccStatsEntry 2 } 	

	atmCesVccStatsVci  OBJECT-TYPE
	    SYNTAX    INTEGER
	    ACCESS    read-only
            STATUS    mandatory
	    DESCRIPTION
               "The virtual channel identifier associated with the 
                virtual connection."
	    ::= { atmxCesVccStatsEntry 3 }

	atmxCesVccStatsTxDataCells  OBJECT-TYPE
	    SYNTAX  Counter 
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION 
	      "The total number of successfully transmitted cells
	       which assembled from actual data instead of conditioned 
	       data."
	    ::= { atmxCesVccStatsEntry 4 }

	atmxCesVccStatsTxCondCells  OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
              "The total number of successfully transmitted cells
	       which assembled from conditioned data."
	    ::= { atmxCesVccStatsEntry 5 }

	atmxCesVccStatsSuppressedTxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The total number of cells that are not sent because of
	        line resynchronization."
	    ::= { atmxCesVccStatsEntry 6 }

	atmxCesVccStatsRxCells  OBJECT-TYPE 
            SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The total number of cells received and played out to
	        circuit emulation port."
	    ::= { atmxCesVccStatsEntry 7 }

	atmxCesVccStatsSnpErrors   OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The total number of cells received with uncorrectable
	        Sequence Number Protection (SNP)."
	    ::= { atmxCesVccStatsEntry 8 }

	atmxCesVccStatsSeqNumErrors   OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The total number of cells received with unexpected
	        sequence number."
	    ::= { atmxCesVccStatsEntry 9 }
	
	atmxCesVccStatsDroppedRxCellUnderrun  OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The total number of cells dropped due to receive
	        queue underrun."
	    ::= { atmxCesVccStatsEntry 10 }
	
	atmxCesVccStatsDroppedRxCellOverrun OBJECT-TYPE
	   SYNTAX  Counter
	   ACCESS  read-only
	   STATUS  mandatory
	   DESCRIPTION
	      "The total number of cells dropped due to receive
	       queue overrun."
           ::= { atmxCesVccStatsEntry 11 }
	
	atmxCesVccStatsCellLossStatus OBJECT-TYPE
	   SYNTAX INTEGER {
	          noLoss(1),
	          loss(2)
	       }
	   ACCESS read-only
	   STATUS mandatory
	   DESCRIPTION
	      "When cells are lost for the number of milliseconds specified
	       be atmxCesVccCellLossIntegrationPeriod, the value is set to
	       loss(2).  When cells are no longer lost, the value is set
	       to noLoss(1)."
	   ::= { atmxCesVccStatsEntry 12 }


	atmxCesVccRateTable OBJECT-TYPE
             SYNTAX   SEQUENCE OF AtmxCesVccRateEntry
	     ACCESS   not-accessible
	     STATUS   mandatory
	     DESCRIPTION
                 "The Circuit Emulation Service statistical rate for
                  virtual circuits."
             ::= { atmxCesVccStatsGroup 2 }

        atmxCesVccRateEntry  OBJECT-TYPE
             SYNTAX AtmxCesVccRateEntry
             ACCESS not-accessible
             STATUS mandatory
             DESCRIPTION
                 "An entry in the table, containing statistical rate of 
	          CES virtual connection."
             INDEX { atmxCesVccRateSlotIndex, atmxCesVccRatePortIndex,
	             atmCesVccRateVci }
             ::= { atmxCesVccRateTable 1 }

        AtmxCesVccRateEntry ::= SEQUENCE {
	    atmxCesVccRateSlotIndex
	         INTEGER,
	    atmxCesVccRatePortIndex
	         INTEGER,
	    atmCesVccRateVci
	         INTEGER,
	    atmxCesVccRateTxDataCells
	        Counter,
	    atmxCesVccRateTxCondCells
	        Counter,
	    atmxCesVccRateSuppressedTxCells
	        Counter,
	    atmxCesVccRateRxCells
	        Counter,
	    atmxCesVccRateSnpErrors
	        Counter,
            atmxCesVccRateSeqNumErrors
                Counter,
            atmxCesVccRateDroppedRxCellUnderrun
	        Counter,
            atmxCesVccRateDroppedRxCellOverrun
	        Counter
          }

       atmxCesVccRateSlotIndex OBJECT-TYPE
	     SYNTAX   INTEGER (1..9)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this HSM board slot."
	     ::= { atmxCesVccRateEntry 1 }
	   
	atmxCesVccRatePortIndex OBJECT-TYPE
             SYNTAX   INTEGER (1..32)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this port."
             ::= { atmxCesVccRateEntry 2 } 	

	atmCesVccRateVci  OBJECT-TYPE
	    SYNTAX    INTEGER
	    ACCESS    read-only
            STATUS    mandatory
	    DESCRIPTION
               "The virtual channel identifier associated with the 
                virtual connection."
	    ::= { atmxCesVccRateEntry 3 }

	atmxCesVccRateTxDataCells  OBJECT-TYPE
	    SYNTAX  Counter 
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION 
	      "The rate of successfully transmitted cells
	       which assembled from actual data instead of conditioned 
	       data."
	    ::= { atmxCesVccRateEntry 4 }

	atmxCesVccRateTxCondCells  OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
              "The rate of successfully transmitted cells
	       which assembled from conditioned data."
	    ::= { atmxCesVccRateEntry 5 }

	atmxCesVccRateSuppressedTxCells OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The rate of cells that are not sent because of
	        line resynchronization."
	    ::= { atmxCesVccRateEntry 6 }

	atmxCesVccRateRxCells  OBJECT-TYPE 
            SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The rate of cells received and played out to
	        circuit emulation port."
	    ::= { atmxCesVccRateEntry 7 }

	atmxCesVccRateSnpErrors   OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The rate of cells received with uncorrectable
	        Sequence Number Protection (SNP)."
	    ::= { atmxCesVccRateEntry 8 }

	atmxCesVccRateSeqNumErrors   OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The rate of cells received with unexpected
	        sequence number."
	    ::= { atmxCesVccRateEntry 9 }
	
	atmxCesVccRateDroppedRxCellUnderrun  OBJECT-TYPE
	    SYNTAX  Counter
	    ACCESS  read-only
	    STATUS  mandatory
	    DESCRIPTION
	       "The rate of cells dropped due to receive
	        queue underrun."
	    ::= { atmxCesVccRateEntry 10 }
	
	atmxCesVccRateDroppedRxCellOverrun OBJECT-TYPE
	   SYNTAX  Counter
	   ACCESS  read-only
	   STATUS  mandatory
	   DESCRIPTION
	      "The rate of cells dropped due to receive
	       queue overrun."
           ::= { atmxCesVccRateEntry 11 }

	-- CES SVC Table
        atmxCesSvcConfigTable  OBJECT-TYPE
    	    SYNTAX      SEQUENCE OF AtmxCesSvcConfigEntry
	    ACCESS      not-accessible
	    STATUS      mandatory
	    DESCRIPTION
        	"The table used to manage SVCs established across ATM
         	networks between CES entities."
	    ::= { atmxCesSvcConfigGroup 1 }

	atmxCesSvcConfigEntry    OBJECT-TYPE
	    SYNTAX      AtmxCesSvcConfigEntry
	    ACCESS      not-accessible
	    STATUS      mandatory
	    DESCRIPTION
	        "An entry in the CES SVC table."
	    INDEX   { atmxCesSvcSlotIndex, atmxCesSvcPortIndex,
        	      atmxCesSvcVciIndex }
	    ::= { atmxCesSvcConfigTable 1 }

	AtmxCesSvcConfigEntry ::= 
	    SEQUENCE  {
		atmxCesSvcSlotIndex
		    INTEGER,
		atmxCesSvcPortIndex
		    INTEGER,
		atmxCesSvcVciIndex
		    INTEGER,
		atmxCesSvcRemoteAddr
	            OCTET STRING,
		atmxCesSvcRemoteVpi
		    INTEGER,
		atmxCesSvcRemoteVci
	            INTEGER,
	        atmxCesSvcFirstRetryInterval
                    INTEGER,
	        atmxCesSvcRetryTimer
                    INTEGER,
	        atmxCesSvcRetryLimit
                    INTEGER,
	        atmxCesSvcRetryFailures
                    INTEGER,
	        atmxCesSvcConfigRestart  
                    INTEGER,
	        atmxCesSvcConfigOperStatus
                    INTEGER,
	        atmxCesSvcLastReleaseCause 
                    INTEGER,
    	        atmxCesSvcLastReleaseDiagnostics
	            OCTET STRING
    	}

       atmxCesSvcSlotIndex OBJECT-TYPE
	     SYNTAX   INTEGER (1..9)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this HSM board slot."
	     ::= { atmxCesSvcConfigEntry 1 }
	   
	atmxCesSvcPortIndex OBJECT-TYPE
             SYNTAX   INTEGER (1..32)
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "A unique value which identifies this port."
	     ::= { atmxCesSvcConfigEntry 2 }

	atmxCesSvcVciIndex  OBJECT-TYPE
	    SYNTAX    INTEGER
	    ACCESS    read-only
            STATUS    mandatory
	    DESCRIPTION
               "The virtual channel identifier associated with the 
                virtual connection."
	     ::= { atmxCesSvcConfigEntry 3 }

	atmxCesSvcRemoteAddr              OBJECT-TYPE
	    SYNTAX   OCTET STRING(SIZE (20))
	    ACCESS        read-write
	    STATUS        mandatory
	    DESCRIPTION
        	"The ATM address supporting the corresponding far end
	         CES IWF process.  If no address is supplied, no attempts
        	 to establish the active SVC are initiated."
	    ::= { atmxCesSvcConfigEntry 4 }

	atmxCesSvcRemoteVpi               OBJECT-TYPE
	    SYNTAX        INTEGER
	    ACCESS        read-write
	    STATUS        mandatory
	    DESCRIPTION
        	"The VPI number of the corresponding far end
	         CES IWF process"
	    ::= { atmxCesSvcConfigEntry 5 }

	atmxCesSvcRemoteVci               OBJECT-TYPE
	    SYNTAX        INTEGER
	    ACCESS        read-write
	    STATUS        mandatory
	    DESCRIPTION
        	"The VCI number of the corresponding far end
	         CES IWF process"
	    ::= { atmxCesSvcConfigEntry 6 }

	atmxCesSvcFirstRetryInterval       OBJECT-TYPE
	    SYNTAX        INTEGER (0..36000)
	    ACCESS        read-write
	    STATUS        mandatory
	    DESCRIPTION
        	"The time (in 10ths of a second unit) to wait 
	         before attempting to establish the SVC
		 after the first failed call attempt.  Zero represents an 
		 infinite interval indicating no retries."
	    DEFVAL { 10 }
	    ::= { atmxCesSvcConfigEntry 7 }

	atmxCesSvcRetryTimer              OBJECT-TYPE
	    SYNTAX        INTEGER (0..86400)
	    ACCESS        read-only
	    STATUS        mandatory
	    DESCRIPTION
        	"Indicates the current value of the retry timer (in seconds) for
	         this connection.  When the value reaches zero an attempt
        	 will be made to establish the active SVC.  When the timer
	         is not running, the value zero shall be returned."
            ::= { atmxCesSvcConfigEntry 8 }

	atmxCesSvcRetryLimit              OBJECT-TYPE
	    SYNTAX        INTEGER (0..65535)
	    ACCESS        read-write
	    STATUS        mandatory
	    DESCRIPTION
        	"Sets a maximum limit on how many consecutive unsuccessful
	         call setup attempts can be made before stopping the attempt
        	 to set up the connection.  If this limit is reached then
	         management action will be required (e.g. setting
        	 atmxCesSvcConfigRestart to 'restart') to initiate a new
	         attempt to establish the connection.  A value of zero
	         indicates no limit - the attempts will continue until
	         successful. If this object is not present, no limit on call
	         attempts is assumed."
	    DEFVAL { 0 }
	    ::= { atmxCesSvcConfigEntry 9 }

	atmxCesSvcRetryFailures           OBJECT-TYPE
	    SYNTAX        INTEGER
	    ACCESS        read-only
	    STATUS        mandatory
	    DESCRIPTION
        	"Indicates how many attempts to establish the connection
	         have failed.  This count is reset whenever a connection
	         is successfully established or the active SVC is restarted."
	    ::= { atmxCesSvcConfigEntry 10 }

	atmxCesSvcConfigRestart        OBJECT-TYPE
	    SYNTAX        INTEGER {
        	 restart(1),
                 noop(2)
            }
	    ACCESS	  read-write
	    STATUS        mandatory
	    DESCRIPTION
        	"When the value is set to 'restart' the active SVC
	         is released if necessary and a new setup procedure
        	 is begun.  As a result of this action, the
	         atmxCesSvcConfigOperStatus object transitions to
        	 'establishmentInProgress' (if not already in this state)
	         and the atmxCesRetryFailures object is cleared.

        	 When the value is set to 'noop' no operation is
	         performed.  When read, the value 'noop' is returned."
	    ::= { atmxCesSvcConfigEntry 11 }

	atmxCesSvcConfigOperStatus     OBJECT-TYPE
	    SYNTAX        INTEGER {
        	 other(1),
                 establishmentInProgress(2),
                 connected(3),
                 retriesExhausted(4),
                 noAddressSupplied(5),
        	 lowerLayerDown(6)
            }
	    ACCESS        read-only
	    STATUS        mandatory
	    DESCRIPTION
        	"Describes the status of the active SVC.  Valid values are:
	            other - none of the types specified below
        	    establishmentInProgress - connection is not operational,
                	                      but call attempts are ongoing
	            connected          - connection is currently operational
        	    retriesExhausted   - retry limit has been reached and call
                	                 attempts have ceased
	            noAddressSupplied  - no remote address has been configured,
        	                         so no call attempts are initiated
	            lowerLayerDown     - underlying CES IWF is not operational

        	 When the entry is not 'active', the value of this object is
	         'other'."
	    ::= { atmxCesSvcConfigEntry 12 }

	atmxCesSvcLastReleaseCause        OBJECT-TYPE
	    SYNTAX        INTEGER(1..127)
	    ACCESS        read-only
	    STATUS        mandatory
	    DESCRIPTION
        	"Value of the Cause field of the Cause information element
	         in the last RELEASE signalling message received for this
	         SVC.  Indicates the reason for the release."
	    ::= { atmxCesSvcConfigEntry 13 }

	atmxCesSvcLastReleaseDiagnostics  OBJECT-TYPE
	    SYNTAX        OCTET STRING (SIZE(0..8))
	    ACCESS        read-only
	    STATUS        mandatory
	    DESCRIPTION
        	"Value of the first 8 bytes of diagnostic information
	         from the Cause field of the Cause information element
        	 in the last RELEASE signalling message received for this
	         active SVC."
	    ::= { atmxCesSvcConfigEntry 14 }

	atmxCesVccTraps OBJECT IDENTIFIER ::= { atmxCesMIBTraps  1 }

	atmCesVccCreate TRAP-TYPE
	   ENTERPRISE atmxCesVccTraps
	   VARIABLES { atmxCesVccSlotIndex, atmxCesVccPortIndex,
	               atmxCesVccVpi, atmxCesVccVci,
	               atmxCesVccAtmUplinkSlotIndex,
	               atmxCesVccAtmUplinkPortIndex }
	   DESCRIPTION
	       "The ATM circuit emulation virtual circuit is created."
	   ::= 1

	atmCesVccDelete TRAP-TYPE
	   ENTERPRISE atmxCesVccTraps
	   VARIABLES { atmxCesVccSlotIndex, atmxCesVccPortIndex,
	               atmxCesVccVpi, atmxCesVccVci,
	               atmxCesVccAtmUplinkSlotIndex,
	               atmxCesVccAtmUplinkPortIndex }	
	   DESCRIPTION
	       "The ATM circuit emulation virtual circuit is deleted."
	   ::= 2

   END