XEROX-PRINTER-EXT-MIB DEFINITIONS ::= BEGIN -- Module: Printer MIB Extensions -- Author: Angelo Caruso & Gary Padlipsky -- File: 16prtx.txt -- Date: August 30, 1997 -- Version: 2.36.pub IMPORTS DisplayString FROM RFC1213-MIB MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI -- RFC 1442/1902 RowStatus FROM SNMPv2-TC -- RFC 1443/1903 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC 1444/1904 hrDeviceIndex FROM HOST-RESOURCES-MIB PresentOnOff, prtGeneralEntry, prtInputEntry, prtOutputEntry, prtChannelEntry, prtInterpreterEntry, prtInterpreterIndex FROM Printer-MIB -- RFC 1759 xeroxCommonMIB FROM XEROX-COMMON-MIB Cardinal32, Ordinal32, XcmFixedLocaleDisplayString, XcmGenRowPersistence FROM XEROX-GENERAL-TC XcmPrtAuxSheetContent, XcmPrtAuxSheetType, XcmPrtGroupSupport, XcmPrtIETFPrintMIBGroupSupport, XcmPrtMediaTypeErrorPolicy, XcmPrtMediumClassType, XcmPrtMediumSize, XcmPrtOutputOffsetStackingType, XcmPrtPageSizeErrorPolicy, XcmPrtPCLFontSource, XcmPrtPlex, XcmPrtPrintQuality, XcmPrtPrintScreen, XcmPrtTraySwitch FROM XEROX-PRINTER-EXT-TC; xcmPrintMIB MODULE-IDENTITY LAST-UPDATED "9708300000Z" ORGANIZATION "Xerox Common Management Interface Working Group" CONTACT-INFO " XCMI Editors E-Mail: xcmieditors@cp10.es.xerox.com -- -- " DESCRIPTION " Version: 2.36.pub Xerox Printer MIB Extensions Module. This Module provides extension to the IETF Printer MIB. Copyright (C) 1997 Xerox Corporation. All Rights Reserved." ::= { xeroxCommonMIB 55 } -- -- Groups in the XEROX-PRINTER-EXT-MIB -- xcmPrtBase OBJECT IDENTIFIER ::= { xcmPrintMIB 1 } xcmPrtGeneral OBJECT IDENTIFIER ::= { xcmPrintMIB 5 } xcmPrtInput OBJECT IDENTIFIER ::= { xcmPrintMIB 8 } xcmPrtOutput OBJECT IDENTIFIER ::= { xcmPrintMIB 9 } xcmPrtChannel OBJECT IDENTIFIER ::= { xcmPrintMIB 14 } xcmPrtInterpreter OBJECT IDENTIFIER ::= { xcmPrintMIB 15 } xcmPrtInputAlias OBJECT IDENTIFIER ::= { xcmPrintMIB 50 } xcmPrtAuxSheet OBJECT IDENTIFIER ::= { xcmPrintMIB 52 } xcmPrtAuxPackage OBJECT IDENTIFIER ::= { xcmPrintMIB 60 } xcmPrtMediumTypeSupported OBJECT IDENTIFIER ::= { xcmPrintMIB 75 } xcmPrtInterpPCL OBJECT IDENTIFIER ::= { xcmPrintMIB 70 } -- -- Base Group (Mandatory) -- -- Implementation of the xcmPrtBaseGroup is mandatory. -- -- Usage: Conforming management agents which implement this -- group shall ALWAYS implement all of the mandatory groups -- and all of the applicable conditionally mandatory groups -- in the IETF Printer MIB (RFC 1759). xcmPrtBaseTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtBaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of general counters and information for ease of use of the XCMI Printer MIB Extensions Module and the IETF Printer MIB (RFC 1759) on this host system. Usage: The ONLY valid row in the 'xcmPrtBaseTable' shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1')." ::= { xcmPrtBase 2 } xcmPrtBaseEntry OBJECT-TYPE SYNTAX XcmPrtBaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of general counters and information for ease of use of the XCMI Printer MIB Extensions Module and the IETF Printer MIB (RFC 1759) on this host system. Usage: The ONLY valid row in the 'xcmPrtBaseTable' shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1')." INDEX { xcmPrtBaseIndex } ::= { xcmPrtBaseTable 1 } XcmPrtBaseEntry ::= SEQUENCE { -- xcmPrtBaseGroup xcmPrtBaseIndex Ordinal32, xcmPrtBaseRowStatus RowStatus, xcmPrtBaseGroupSupport XcmPrtGroupSupport, xcmPrtBaseUpdateSupport XcmPrtGroupSupport, xcmPrtBaseCreateSupport XcmPrtGroupSupport, xcmPrtBaseIETFMIBGroupSupport XcmPrtIETFPrintMIBGroupSupport, xcmPrtBaseIETFMIBUpdateSupport XcmPrtIETFPrintMIBGroupSupport, xcmPrtBaseIETFMIBCreateSupport XcmPrtIETFPrintMIBGroupSupport } xcmPrtBaseIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value used by this host system to identify this conceptual row in the 'xcmPrtBaseTable'. Usage: The ONLY valid row in the 'xcmPrtBaseTable' shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1')." ::= { xcmPrtBaseEntry 1 } xcmPrtBaseRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to display status of the ONLY valid conceptual row in the 'xcmPrtBaseTable'. Usage: 'xcmPrtBaseRowStatus' is 'read-only' because the ONLY valid conceptual row shall NOT be deleted." ::= { xcmPrtBaseEntry 2 } xcmPrtBaseGroupSupport OBJECT-TYPE SYNTAX XcmPrtGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION " The terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects which are supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask." DEFVAL { 0 } -- no mandatory groups ::= { xcmPrtBaseEntry 3 } xcmPrtBaseUpdateSupport OBJECT-TYPE SYNTAX XcmPrtGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION " The terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects which are supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask." DEFVAL { 0 } -- no existing row update groups ::= { xcmPrtBaseEntry 4 } xcmPrtBaseCreateSupport OBJECT-TYPE SYNTAX XcmPrtGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION " The terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects which are supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask." DEFVAL { 0 } -- no dynamic row create groups ::= { xcmPrtBaseEntry 5 } xcmPrtBaseIETFMIBGroupSupport OBJECT-TYPE SYNTAX XcmPrtIETFPrintMIBGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION " The terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects in the IETF Printer MIB which are supported by this management agent implementation (ie, version) on this host system, specified in a bit-mask." REFERENCE "See: IETF Printer MIB" DEFVAL { 127525 } -- (1F225H) mandatory groups ::= { xcmPrtBaseEntry 6 } xcmPrtBaseIETFMIBUpdateSupport OBJECT-TYPE SYNTAX XcmPrtIETFPrintMIBGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION " The terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects in the IETF Printer MIB supported for existing row update (via SNMP Set-Request PDUs) by this management agent implementation (ie, version) on this host system, specified in a bit-mask." REFERENCE "See: IETF Printer MIB" DEFVAL { 0 } -- no existing row update groups ::= { xcmPrtBaseEntry 7 } xcmPrtBaseIETFMIBCreateSupport OBJECT-TYPE SYNTAX XcmPrtIETFPrintMIBGroupSupport MAX-ACCESS read-only STATUS current DESCRIPTION " The terse conformance statement of ALL mandatory, conditionally mandatory, and optional module objects in the IETF Printer MIB supported for dynamic row creation (via '...RowStatus') by this management agent implementation (ie, version) on this host system, specified in a bit-mask. Currently there are no groups within the IETF Printer MIB which provide for dynamic row creation, and this object shall always return '0'. Dynamic row creation is provided to these groups through the XCMI Printer MIB Extensions Module, but CreateSupport should be reflected in xcmPrtBaseCreateSupport. This object is included for completeness." REFERENCE "See: IETF Printer MIB" DEFVAL { 0 } -- no dynamic row create groups ::= { xcmPrtBaseEntry 8 } -- -- The Printer MIB General Group Extension (xcmPrtGeneralGroup) -- -- This group logically augments the Printer MIB's prtGeneral group. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table of general information per printer. This table augments the prtGeneralTable." ::= { xcmPrtGeneral 1 } xcmPrtGeneralEntry OBJECT-TYPE SYNTAX XcmPrtGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists in this table for each device entry in the hostmib device table whose type is printer." AUGMENTS { prtGeneralEntry } ::= { xcmPrtGeneralTable 1 } XcmPrtGeneralEntry ::= SEQUENCE { -- xcmPrtGeneralGroup xcmPrtGeneralRowStatus RowStatus, xcmPrtGeneralAuxSheetPackage Cardinal32, xcmPrtGeneralManualFeedTimeout Integer32, xcmPrtGeneralInputAutoSwitch PresentOnOff, xcmPrtGeneralOutputAutoSwitch PresentOnOff, xcmPrtGeneralMediumClassDefault XcmPrtMediumClassType, xcmPrtGeneralDarknessLevels Cardinal32, xcmPrtGeneralDarknessLevelNorm Cardinal32, xcmPrtGeneralDarknessLevelDflt Integer32, xcmPrtGeneralHexDumpEnable PresentOnOff, -- xcmPrtGeneralAuxSheetGroup xcmPrtGeneralStartupPage PresentOnOff, xcmPrtGeneralBannerPage PresentOnOff, -- xcmPrtGeneralProdSpecificGroup xcmPrtGeneralScanlineCompaction PresentOnOff } xcmPrtGeneralRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtGeneralTable." ::= { xcmPrtGeneralEntry 1 } xcmPrtGeneralAuxSheetPackage OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object is an index into the xcmPrtAuxPackageTable. This table is used to enable or disable printing of auxiliary sheets at the printer box level. The value zero shall mean not specified." REFERENCE " See: xcmPrtInterpAuxSheetPackage See: xcmPrtChannelAuxSheetPackage See: xcmPrtGeneralAuxSheetGroup - xcmPrtGeneralStartupPage See: xcmPrtGeneralAuxSheetGroup - xcmPrtGeneralBannerPage" DEFVAL { 0 } -- Not Specified ::= { xcmPrtGeneralEntry 2 } xcmPrtGeneralManualFeedTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " The duration in seconds after which the printer shall either: (a) switch to another input subunit, if the value of prtInputNextIndex is non-zero and prtGeneralAutoSwitch is on or (b) abort any job waiting for manually fed input, if the value value of prtInputNextIndex is zero or prtGeneralAutoSwitch is off or notPresent. The event which causes the printer to enter the waiting state is product specific. A value of (-1) implies 'other' or 'infinite' which translates to 'this input subunit doesn't support manual feed'. A value of (-2) implies 'unknown'." REFERENCE " This object copied from the April 1996 Printer MIB prtInputManualFeedTimeout object. This object is currently in the prtInputTable. The XCMI WG will push in June 1996 to move this object the prtGeneralTable as done here." DEFVAL { -1 } -- other or infinite ::= { xcmPrtGeneralEntry 3 } xcmPrtGeneralInputAutoSwitch OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the state of the auto input switching feature. The value notPresent indicates the feature is not currently supported. Exact behavior of this feature is product specific." REFERENCE " This object copied from the April 1996 Printer MIB prtInputAutoSwitch object. This object is currently in the prtInputTable. The XCMI WG will push in June 1996, to move this object the prtGeneralTable as done here." DEFVAL { notPresent } ::= { xcmPrtGeneralEntry 4 } xcmPrtGeneralOutputAutoSwitch OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates the state of the auto output tray switching feature. The value notPresent indicates the feature is not currently supported. Exact behavior of this feature is product specific." DEFVAL { notPresent } ::= { xcmPrtGeneralEntry 5 } xcmPrtGeneralMediumClassDefault OBJECT-TYPE SYNTAX XcmPrtMediumClassType MAX-ACCESS read-create STATUS current DESCRIPTION " This object sets the default medium size class for the printer. This object sets the medium size for printer management functions such as printing the configuration sheet. It may affect any media related object, such as form length." DEFVAL { unknown } ::= { xcmPrtGeneralEntry 6 } xcmPrtGeneralDarknessLevels OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This value indicates the maximum number of darkness levels supported by this printer. The level settings range from 1 to xcmPrtGeneralDarknessLevels where 1 represents the lightest level and xcmPrtGeneralDarknessLevels represents the darkest level. The value 1 implies no user settables. The value 0 means unspecified. The selection of a darkness levels specifies that the printer shall process the page images so that they appear either 'lighter' or 'darker'." DEFVAL { 0 } -- unspecified ::= { xcmPrtGeneralEntry 7 } xcmPrtGeneralDarknessLevelNorm OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " The normal setting for the darkness printing object. The value 0 means unspecified." DEFVAL { 0 } -- unspecified ::= { xcmPrtGeneralEntry 8 } xcmPrtGeneralDarknessLevelDflt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The default setting for the density printing option. The value (-2) indicates unknown. The value (-4) indicates the auto setting." REFERENCE " See: PJL Technical Reference Manual - DENSITY" DEFVAL { -2 } -- unknown ::= { xcmPrtGeneralEntry 9 } xcmPrtGeneralHexDumpEnable OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object controls whether the printer is in a special diagnostic mode wherein all received print data is printed in hexadecimal format. Whether a reset or power-cycles turns xcmPrtGeneralHexDumpEnable to Off is product dependent." REFERENCE " See: Printer MIB prtInterpreterLangFamily - langDiagnostic(41)" DEFVAL { notPresent } ::= { xcmPrtGeneralEntry 10 } -- -- The General Auxiliary Sheet Group (xcmPrtGeneralAuxSheetGroup) -- -- The auxiliary sheet group allows the administrator to control the -- production of auxiliary sheets by the printer. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- -- This Group copied from the v2 Printer MIB dated April 96. -- xcmPrtGeneralStartupPage OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Used to enable or disable printing a startup page. If enabled, a startup page will be printed shortly after power-up, when the device is ready. Typical startup pages include test patterns and/or printer configuration information." REFERENCE " This object copied directly from the April 1996 version of the Printer MIB's prtGeneralStartupPage object." DEFVAL { notPresent } ::= { xcmPrtGeneralEntry 11 } xcmPrtGeneralBannerPage OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Used to enable or disable printing banner pages at the beginning of jobs. This is a master switch which applies to all jobs, regardless of interpreter." REFERENCE " This object copied directly from the April 1996 version of the Printer MIB's prtGeneralBannerPage object." DEFVAL { notPresent } ::= { xcmPrtGeneralEntry 12 } -- -- The xcmPrtGeneralGroup (continued) -- -- The xcmPrt General Group for Product Specific implementations -- (xcmPrtGeneralProdSpecificGroup) -- -- This group logically augments the Printer MIB's prtGeneral group, -- and is a continuation of the xcmPrtGeneralGroup. This object is -- considered specific to one product. -- -- Implementation of any object in this group is optional. -- xcmPrtGeneralScanlineCompaction OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object enables a printing mode wherein the printer compresses selected scanlines of raster image data as they are received and holds them in compressed form until they are to be printed. This allows particular jobs to be processed with less memory, but often reduced performance as well. On some Printers, turning this feature Off is referred to as 'PerformanceEnhancement'. When xcmInterpPageProtect is set to Off, some complex jobs may not print successfully with minimum memory. The ScanlineCompaction feature enables printing some complex jobs without resorting to reserving additional memory by turning on the PageProtect option or installing additional memory." REFERENCE " See: xcmPrtInterpPageProtect See: DocuPrint 4517 Network Laser Printers User Guide, Pg. D-12" DEFVAL { notPresent } ::= { xcmPrtGeneralEntry 50 } -- -- The Printer MIB Input group extension (xcmPrtInputGroup) -- -- This group logically augments the Printer MIB's prtInput group. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtInputTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table logically augments the Printer MIB's prtInputTable." ::= { xcmPrtInput 1 } xcmPrtInputEntry OBJECT-TYPE SYNTAX XcmPrtInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entries may exist for each entry in the prtInputTable." AUGMENTS { prtInputEntry } ::= { xcmPrtInputTable 1 } XcmPrtInputEntry ::= SEQUENCE { xcmPrtInputRowStatus RowStatus, xcmPrtInputNextPrtInputIndex Integer32 } xcmPrtInputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtInputTable." ::= { xcmPrtInputEntry 1 } xcmPrtInputNextPrtInputIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied. The value of zero indicates that auto input switching will not occur when this input subunit is emptied. Two different mechanisms for input tray switching, xcmPrtNextPrtInputIndex and xcmPrtInputAliasGroup, are provided. A device agent may make use of one or the other, none, or both. Use the model that fits best for the given application." REFERENCE " See: xcmPrtInputAliasGroup See: xcmPrtInterpTraySwitch" DEFVAL { 0 } ::= { xcmPrtInputEntry 2 } -- The Printer MIB Output group extension (xcmPrtOutputGroup) -- -- This group logically augments the Printer MIB's prtOutput group. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtOutputTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table logically augments the prtOutputTable in the Printer MIB." ::= { xcmPrtOutput 1 } xcmPrtOutputEntry OBJECT-TYPE SYNTAX XcmPrtOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entries may exist for each entry in the prtOutputTable." AUGMENTS { prtOutputEntry } ::= { xcmPrtOutputTable 1 } XcmPrtOutputEntry ::= SEQUENCE { xcmPrtOutputRowStatus RowStatus, xcmPrtOutputNextIndex Integer32, xcmPrtOutputPassword OCTET STRING (SIZE(0..255)), xcmPrtOutputOffsetStackingType XcmPrtOutputOffsetStackingType, xcmPrtOutputTrayTimeoutSupport PresentOnOff, xcmPrtOutputTrayTimeout Cardinal32 } xcmPrtOutputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtOutputTable." ::= { xcmPrtOutputEntry 1 } xcmPrtOutputNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of prtOutputIndex corresponding to the output subunit which will be used when this output subunit is filled. A value of zero(0) indicates that auto output switching will not occur when this output subunit is filled." DEFVAL { 0 } ::= { xcmPrtOutputEntry 2 } xcmPrtOutputPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION " This object is used as the password for an Output Tray, e.g. an output mailbox. It is the value that must be entered to open the output tray." REFERENCE "See: prtOutputSecurity." DEFVAL { ''H } ::= { xcmPrtOutputEntry 3 } xcmPrtOutputOffsetStackingType OBJECT-TYPE SYNTAX XcmPrtOutputOffsetStackingType MAX-ACCESS read-create STATUS current DESCRIPTION " This object further refines the type of offset stacking from that specified by the object prtOutputOffsetStacking in the Printer MIB." REFERENCE " See: prtOutputOffsetStacking See: xcmPrtInterpOffsetStackingType" DEFVAL { notSpecified } ::= { xcmPrtOutputEntry 4 } xcmPrtOutputTrayTimeoutSupport OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Determines whether the printer should wait before sending the printed output to another output destination when the selected or default destination is full. 'On' indicates that would should wait as specified by xcmPrtOutputTrayTimeout. 'Off' indicates this feature is off and should immediately seek to send the printed output to another destination. The value 'other' shall mean not specified." REFERENCE "See: xcmPrtOutputTrayTimeout" DEFVAL { other } -- not specified ::= { xcmPrtOutputEntry 5 } xcmPrtOutputTrayTimeout OBJECT-TYPE SYNTAX Cardinal32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " Determines how long the printer should wait before sending the printed output to another output destination when the selected or default destination is full. A value of (0) implies 'other' or 'infinite' which translates to this input subunit does not support this feature." DEFVAL { 0 } -- other or infinite ::= { xcmPrtOutputEntry 6 } -- The Printer MIB Channel group extension (xcmPrtChannelGroup) -- -- This group logically augments the Printer MIB's prtChannel group. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table logically augments Printer MIB's prtChannelTable." ::= { xcmPrtChannel 1 } xcmPrtChannelEntry OBJECT-TYPE SYNTAX XcmPrtChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists corresponding to each entry in the prtChannelTable." AUGMENTS { prtChannelEntry } ::= { xcmPrtChannelTable 1 } XcmPrtChannelEntry ::= SEQUENCE { xcmPrtChannelRowStatus RowStatus, xcmPrtChannelEOJTimeout Cardinal32, xcmPrtChannelAuxSheetPackage Cardinal32, xcmPrtChannelSpoolingEnable PresentOnOff, xcmPrtChannelLangSensing PresentOnOff, -- xcmPrtChannelProductSpecificGroup xcmPrtChannelAutoJobEnd PresentOnOff } xcmPrtChannelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtChannelTable." ::= { xcmPrtChannelEntry 1 } xcmPrtChannelEOJTimeout OBJECT-TYPE SYNTAX Cardinal32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " Defines the number of seconds that the channel waits before timing out. For example, this may be used for the parallel channel. The value zero means infinite or no timeout on the channel." DEFVAL { 0 } -- No timeout ::= { xcmPrtChannelEntry 2 } xcmPrtChannelAuxSheetPackage OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object is an index into the xcmPrtAuxPackageTable. This table is used to enable or disable printing of auxiliary sheets by this channel. The value zero shall mean not specified." REFERENCE " See: xcmPrtGeneralAuxSheetPackage See: xcmPrtInterpAuxSheetPackage" DEFVAL { 0 } -- Not specified ::= { xcmPrtChannelEntry 3 } xcmPrtChannelSpoolingEnable OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object controls spooling to a large data store such as a hard disk. When set to On, data received and waiting to be processed from any port is spooled onto the large data store and later retrieved for processing. This allows the printer to receive the data more rapidly, thus freeing the data source sooner. It may also increase throughput by having the next job's print data already local for processing. When set to Off, the spooling feature is disabled. Data received is not spooled to the large data store, and is accepted by the printer only as needed for printing. You may want to disable this spooling feature if spooling is already done outside the printer; having the spooling done on the printer as well, may not add value, and may create error recovery and queue monitoring difficulties. The value 'other' shall mean not specified." REFERENCE " DocuPrint 4517 Network Laser Printers User Guide, pg. D-5." DEFVAL { other } -- not specified ::= { xcmPrtChannelEntry 4 } xcmPrtChannelLangSensing OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object indicates whether the channel supports detection of the input PDL language type, and if so, whether the feature is enabled. Currently, the prtChannelDefaultPageDescLangIndex points to the Page Description Language Interpreter for this channel. One of the PDL types enumerated in the prtInterpreterLangFamily object is langAutomatic(37), to be used for automatic PDL sensing; however, if the language sensing fails there is no fallback language for the channel. Conforming implementations shall use xcmPrtChannelLangSensing for each channel and deprecate use of the langAutomatic(37) enum in favor of the literal default language in the prtInterpreterLangFamily object. The value 'other' shall mean not specified." REFERENCE " See: Printer MIB prtInterpreterLangFamily" DEFVAL { other } -- not specified ::= { xcmPrtChannelEntry 5 } -- xcmPrt Channel Group for Product Specific implementions -- (xcmPrtChannelProdSpecificGroup) -- -- This group logically augments the Printer MIB's prtChannel group, -- and is a continuation of the xcmPrtChannelGroup. These objects -- are considered specific to one product. -- -- Implementation of any object in this group is optional. -- xcmPrtChannelAutoJobEnd OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Controls automatic ending of a print job that does not finish printing. When 'On', after the current print job has paused long enough to exceed the xcmPrtChannelEOJTimeout interval, the current print job will be stopped. When 'Off', the print job does not end after the timeout interval. Instead, the printer waits to continue until another print job is received on any port. A partial page will remain unprinted until the next print job is received. The current job will then be stopped. The value 'other' shall indicate not specified." REFERENCE " See: xcmPrtChannelEOJTimeout See: Xerox 4517+ User Guide See: Xerox 4505 User Guide" DEFVAL { other } -- not specified ::= { xcmPrtChannelEntry 80 } -- -- The Printer MIB Interpreter group extension (xcmPrtInterpreterGroup) -- -- This group logically augments the Printer MIB's prtInterpreter group. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtInterpreterTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtInterpreterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table logically augments the Printer MIB's prtInterpreterTable." ::= { xcmPrtInterpreter 1 } xcmPrtInterpreterEntry OBJECT-TYPE SYNTAX XcmPrtInterpreterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists corresponding to each entry in the prtInterpreterTable." AUGMENTS { prtInterpreterEntry } ::= { xcmPrtInterpreterTable 1 } XcmPrtInterpreterEntry ::= SEQUENCE { -- xcmPrtInterpreterGroup xcmPrtInterpRowStatus RowStatus, xcmPrtInterpAuxSheetPackage Cardinal32, xcmPrtInterpContextSaving PresentOnOff, xcmPrtInterpEdgeEnhancement PresentOnOff, xcmPrtInterpFontIndexDefault Integer32, xcmPrtInterpGrayLevels Cardinal32, xcmPrtInterpGrayLevelDefault Cardinal32, xcmPrtInterpJamRecovery PresentOnOff, xcmPrtInterpJobCopiesDefault Ordinal32, xcmPrtInterpLineWrap PresentOnOff, xcmPrtInterpMediumSizeDefault XcmPrtMediumSize, xcmPrtInterpPageProtect PresentOnOff, xcmPrtInterpPageProtectSize XcmPrtMediumSize, xcmPrtInterpPageSizeErrorPolicy XcmPrtPageSizeErrorPolicy, xcmPrtInterpPlexSupported XcmPrtPlex, xcmPrtInterpPlexDefault XcmPrtPlex, xcmPrtInterpPrintEdgeToEdge PresentOnOff, xcmPrtInterpPrintQuality XcmPrtPrintQuality, xcmPrtInterpPrtInputIndexDflt Cardinal32, xcmPrtInterpPrtOutputIndexDflt Cardinal32, xcmPrtInterpResFeedDirDefault Cardinal32, xcmPrtInterpResXFeedDirDefault Cardinal32, xcmPrtInterpResIPResIndex Cardinal32, xcmPrtInterpResIPResIndexDflt Cardinal32, xcmPrtInterpTextFormLength Cardinal32, xcmPrtInterpTimeoutJob Cardinal32, xcmPrtInterpTimeoutPage Cardinal32, xcmPrtInterpInputAliasIndexDflt Cardinal32, xcmPrtInterpTraySwitch XcmPrtTraySwitch, xcmPrtInterpMediumTypeDefault XcmFixedLocaleDisplayString (SIZE(0..255)), xcmPrtInterpMediaTypeErrPolicy XcmPrtMediaTypeErrorPolicy, xcmPrtInterpErrorPolicyTimeout Cardinal32, xcmPrtInterpLineTerm PresentOnOff, -- xcmPrtInterpProdSpecific01Group xcmPrtInterpAutoContinue PresentOnOff, xcmPrtInterpEnvFeederSize XcmPrtMediumSize, xcmPrtInterpManualFeedPgSize XcmPrtMediumSize, xcmPrtInterpOffsetStackingType XcmPrtOutputOffsetStackingType } xcmPrtInterpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtInterpreterTable." ::= { xcmPrtInterpreterEntry 1 } xcmPrtInterpAuxSheetPackage OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object is an index into the xcmPrtAuxPackageTable. This table is used to enable or disable printing of auxiliary sheets by this interpreter. The value zero shall mean not specified." REFERENCE " See: xcmPrtGeneralAuxSheetPackage See: xcmPrtChannelAuxSheetPackage" DEFVAL { 0 } -- Not specified ::= { xcmPrtInterpreterEntry 2 } xcmPrtInterpContextSaving OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Enables reserving memory for saving permanently downloaded fonts and macros, when the printer switches between this and another interpreter. The effect is to save the memory for a subsequent job using this interpreter. When set to Off, all permanently downloaded fonts and macros are cleared from memory when switching PDLs. They must be downloaded again when the printer switches back to using the current PDL. When set to On, permanently downloaded fonts and macros are stored in printer memory. You eliminate the time to download them again when the printer switches back to the current PDL. In PCL, this is referred to as Resource Savings. The value 'other' shall mean not specified." REFERENCE " DocuPrint 4517 Network Laser Printers User Guide, Pg. D-16." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 3 } xcmPrtInterpEdgeEnhancement OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies whether the printer should perform EdgeEnhancement of the image of the printed document for this interpreter. interpreter. The value 'other' shall mean not specified." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 4 } xcmPrtInterpFontIndexDefault OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of xcmFontIndex corresponding to the xcmFontEntry which represents the default font for this Interpreter. A value of (-1) means 'other'. A value of (-2) means 'unknown'. A value of (-3) means 'notPresent'. A value of 'other' (-3) should be used for those interpreters which have no default font (e.g. PostScript). For agents that choose not to implement the Resources MIB, this object specifies the ID of the default font. This use of this object is significant only to the specific product." DEFVAL { -2 } -- unknown ::= { xcmPrtInterpreterEntry 5 } xcmPrtInterpGrayLevels OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object describes the gray levels supported by this interpreter. This may represent gray levels within a color plane. The value zero means not specified for this interpreter." DEFVAL { 0 } -- Not specified. ::= { xcmPrtInterpreterEntry 6 } xcmPrtInterpGrayLevelDefault OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object controls the number of gray scales for this interpreter. The value zero means not specified for this interpreter." REFERENCE "See: xcmPrtInterpGrayLevels" DEFVAL { 0 } -- not Specified. ::= { xcmPrtInterpreterEntry 7 } xcmPrtInterpJamRecovery OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object controls how the printer recovers from a paper jam. When set to On, the printer reprints any pages in the printer at the time of the jam, after the jam has been cleared. The printer does this by using a portion of memory to store print data. This may slow throughput. When set to Off, some pages may be lost after the jam has been cleared. The print job must be re-sent, specifying those pages that did not print as a result of the paper jam. The value 'other' shall mean not specified." REFERENCE " DocuPrint 4517 Network Laser Printers User Guide, Pg. D-9." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 8 } xcmPrtInterpJobCopiesDefault OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This defines the default number of job copies to be printed by this interpreter. If set incorrectly, this object may cause difficulties at customer sites. Agent developers should consider making this object read-only, permanently set to one copy." REFERENCE " See: ISO/IEC 10175-1:1996(E) - Section 9.2.2.1: Results-profile job-copies See: PJL Technical Reference Manual - COPIES See: PCL 5 Printer Language Technical Reference Manual - Number of Copies Command" DEFVAL { 1 } -- One copy ::= { xcmPrtInterpreterEntry 9 } xcmPrtInterpLineWrap OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object controls whether long lines are wrapped or truncated. If On, long lines wrap to the next line. If Off, long lines are truncated. Note the meaning of 'long' depends on the orientation and the current page size. The value 'other' shall mean not specified." REFERENCE " Adobe PostScript Language Reference Manual Supplement." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 10 } xcmPrtInterpMediumSizeDefault OBJECT-TYPE SYNTAX XcmPrtMediumSize MAX-ACCESS read-create STATUS current DESCRIPTION " This object specifies the default medium size for an interpreter. It is used if no medium size is specified. For PCL, this object sets the General PJL Environment variable 'Paper'. The xcmPrtInterpMediumSizeDefault object may be affected by setting the xcmPrtGeneralMediumClassDefault object." REFERENCE " See: PCL 5 Printer Language Technical Reference Manual See: PJL Technical Reference Manual - PAPER See: xcmPrtGeneralMediumClassDefault" DEFVAL { notSpecified } ::= { xcmPrtInterpreterEntry 11 } xcmPrtInterpPageProtect OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object enables reserving sufficient memory for printing complex pages, thus avoiding Page Too Complex errors. The amount of memory reserved is implementation specific. When this feature is turned on, printer performance may be slowed. The value 'other' shall mean not specified." REFERENCE " DocuPrint 4517 Network Laser Printers User Guide, Pg. D-11." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 12 } xcmPrtInterpPageProtectSize OBJECT-TYPE SYNTAX XcmPrtMediumSize MAX-ACCESS read-create STATUS current DESCRIPTION " This object sets the PageSize to be used by this interpreter in reserving sufficient memory for printing complex pages, thus avoiding Page Too Complex Errors. The actual amount of memory to be reserved as a function of the specified page size is implementation specific. When this feature is turned on, printer performance may be slowed. In PCL, this object supports the General PJL Environment Variable 'PAGEPROTECT'. This object the sets the page protection configuration. The page protection feature reserves a block of printer memory to prevent printer overrun errors when formatting very dense or complex images. This variable may be set to any legal value at any time, regardless of the current amount of free memory or the currently set resolution. When a job is sent, if there is not enough memory to print correctly with the current resolution and page protection configuration, the system temporarily overrides the resolution and/or page protect values to run the job. When the page protection status is changed, memory may be reconfigured, and all downloaded fonts, PCL macros, and PostScript dictionaries may be lost. The value notSpecified shall also mean Off." REFERENCE " See: Printer Job Language Technical Reference Manual - General PJL Environment Variable 'PAGEPROTECT'" DEFVAL { notSpecified } -- not specified or Off. ::= { xcmPrtInterpreterEntry 13 } xcmPrtInterpPageSizeErrorPolicy OBJECT-TYPE SYNTAX XcmPrtPageSizeErrorPolicy MAX-ACCESS read-create STATUS current DESCRIPTION " Controls interpreter behavior when the requested Page Size is not currently available." REFERENCE " See: xcmPrtInterpMediaTypeErrPolicy See: xcmPrtInterpErrorPolicyTimeout" DEFVAL { notSpecified } ::= { xcmPrtInterpreterEntry 14 } xcmPrtInterpPlexSupported OBJECT-TYPE SYNTAX XcmPrtPlex MAX-ACCESS read-create STATUS current DESCRIPTION " This object specifies the Plex modes supported by this interpreter. These Plex modes specify the relative orientations between consecutive pages, and capabilities of printing one-side, two-sided or both. " DEFVAL { 0 } -- not specified ::= { xcmPrtInterpreterEntry 15 } xcmPrtInterpPlexDefault OBJECT-TYPE SYNTAX XcmPrtPlex MAX-ACCESS read-create STATUS current DESCRIPTION " This object specifies the default plex for this interpreter. The device shall set no more than one bit. The value zero shall indicate not specified." REFERENCE "See: xcmPrtInterpPlexSupported" DEFVAL { 0 } -- not specified ::= { xcmPrtInterpreterEntry 16 } xcmPrtInterpPrintEdgeToEdge OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Enables edge to edge printing for interpreters that try to enforce a coordinate system that is offset from the edge of the paper, e.g., PCL. When On, jobs are printed to the edge of the paper. When Off, jobs are printed in normal printable area of page. The value 'other' shall mean not specified." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 17 } xcmPrtInterpPrintQuality OBJECT-TYPE SYNTAX XcmPrtPrintQuality MAX-ACCESS read-create STATUS current DESCRIPTION " Sets the default output quality of the printed document for this interpreter. Some printers have programmatically controlled output quality." DEFVAL { normal } ::= { xcmPrtInterpreterEntry 18 } xcmPrtInterpPrtInputIndexDflt OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " Sets the default input source for the interpreter. It is the index to the prtInputGroup. The value zero means not specified." DEFVAL { 0 } -- not specified ::= { xcmPrtInterpreterEntry 19 } xcmPrtInterpPrtOutputIndexDflt OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of the index of the default Output bin for this interpreter. If specified, this object overrides the box level object prtOutputDefaultIndex. The value zero means unspecified." REFERENCE "See: Printer MIB prtOutputDefaultIndex" DEFVAL { 0 } -- unspecified ::= { xcmPrtInterpreterEntry 20 } xcmPrtInterpResFeedDirDefault OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object specifies for this interpreter, the default resolution in the Feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit for this interpreter. A related object is the Printer MIB prtInterpreterFeedAddressability object which describes the maximum interpreter addressability in the feed direction. The value zero shall mean not specified. If this object has a value other than unspecified, this object takes precedence over xcmPrtInterpFeedResIndexDefault." REFERENCE "See: Printer MIB prtInterpreterFeedAddressability" DEFVAL { 0 } -- unspecified ::= { xcmPrtInterpreterEntry 21 } xcmPrtInterpResXFeedDirDefault OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object specifies for this interpreter, the default resolution in the Cross Feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit for this interpreter. A related object is the Printer MIB prtInterpreterFeedAddressability object which describes the maximum interpreter addressability in the cross feed direction. The value zero means unspecified. If this object has a value other than unspecified, this object takes precedence over xcmPrtInterpFeedResIndexDefault." REFERENCE "See: Printer MIB prtInterpreterXFeedAddressability" DEFVAL { 0 } -- unspecified ::= { xcmPrtInterpreterEntry 22 } xcmPrtInterpResIPResIndex OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object shall provide an index into the xcmIPResTable. The xcmIPResTable shall be used to list available resolutions supported by this interpreter. Each row includes objects for Feed Resolution (pixels per inch), XFeed Resolution (pixels per inch), Bits Per Pixel Supported, and Number of Color Planes Supported. The value zero means unspecified." DEFVAL { 0 } -- unspecified ::= { xcmPrtInterpreterEntry 23 } xcmPrtInterpResIPResIndexDflt OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object which is a pointer into the xcmIPResTable sets the print resolution for this interpreter. The value zero means unspecified." DEFVAL { 0 } -- unspecified ::= { xcmPrtInterpreterEntry 24 } xcmPrtInterpTextFormLength OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object sets the maximum number of lines per page for a text file that is being printed using this interpreter. For PCL Interpreters, this object provides the General PJL Environment Variable FORMLINES. This variable is tied to both the PJL Environment Variables PAPER and ORIENTATION. If the value of either of those variables is changed, then the FORMLINES variable automatically is updated to maintain the same line spacing. The value zero means not specified." REFERENCE " See: PJL Technical Reference Manual - FORMLINES" DEFVAL { 0 } -- not specified ::= { xcmPrtInterpreterEntry 25 } xcmPrtInterpTimeoutJob OBJECT-TYPE SYNTAX Cardinal32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " This object sets how long printer will wait for correct end of job from the interpreter. This setting lets you adjust how long the printer will wait to receive the data it needs to complete a job before terminating it prematurely. The value zero means infinite." DEFVAL { 0 } -- Infinite Timeout. ::= { xcmPrtInterpreterEntry 26 } xcmPrtInterpTimeoutPage OBJECT-TYPE SYNTAX Cardinal32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " This object sets how long printer will wait for correct end of page from the interpreter. If, for example, a print job contains a page without the correct end of page code, the job will stall. This setting lets you adjust how long the printer will wait to receive the data it needs to complete a page before terminating it prematurely. The value zero means infinite." DEFVAL { 0 } -- Infinite Timeout ::= { xcmPrtInterpreterEntry 27 } xcmPrtInterpInputAliasIndexDflt OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " Sets the default input tray alias for this interpreter. It is the xcmPrtInputAliasIndex to the xcmPrtInputAlias table. The value zero means 'not specified'." REFERENCE " See: xcmPrtInputAliasTable" DEFVAL { 0 } -- not specified ::= { xcmPrtInterpreterEntry 28 } xcmPrtInterpTraySwitch OBJECT-TYPE SYNTAX XcmPrtTraySwitch MAX-ACCESS read-create STATUS current DESCRIPTION " This object declares for this interpreter the tray switching declaration mechanism used. Note: The tray switching declaration mechanisms do not specify how or when or whether a printer switches back to using an earlier emptied tray after that tray is refilled. For example, assume a printer is set up to first use Tray 1, then when emptied Tray 2, then Tray 3. If just after tray 1 becomes empty and the printer switches to Tray 2, the operator refills Tray 1; the printer may select which tray to pull the next sheet from using a variety of algorithms: - The printer may switch back immediately to use tray 1. This may be particularly appropriate if tray 1 is the high capacity feeder. - The printer may pull sheets from tray 2 until it is empty and then switch back to tray 1. - The printer may pull sheets from tray 2 until it is empty and then continue to tray 3, before switching back to tray 1. Again, implementation of how the input tray switching programs behave when empty trays are refilled is considered printer specific." REFERENCE " See: xcmPrtInputNextPrtInputIndex See: xcmPrtInputAliasGroup" DEFVAL { notSpecified } ::= { xcmPrtInterpreterEntry 29 } xcmPrtInterpMediumTypeDefault OBJECT-TYPE SYNTAX XcmFixedLocaleDisplayString (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies the paper type used to print a page if no paper type is specified by the software application Typical paper types could include Plain, Preprinted, etc." DEFVAL { ''H } -- not specified ::= { xcmPrtInterpreterEntry 30 } xcmPrtInterpMediaTypeErrPolicy OBJECT-TYPE SYNTAX XcmPrtMediaTypeErrorPolicy MAX-ACCESS read-create STATUS current DESCRIPTION " Controls interpreter behavior when the requested Media Type is not currently available." REFERENCE " See: xcmPrtInterpPageSizeErrorPolicy See: xcmPrtInterpErrorPolicyTimeout" DEFVAL { notSpecified } ::= { xcmPrtInterpreterEntry 31 } xcmPrtInterpErrorPolicyTimeout OBJECT-TYPE SYNTAX Cardinal32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " Provides the timeout for ErrorPolicy enumerations requiring one, e.g. 'ignoreAfterTimeout' The value zero shall mean infinite or not supported." REFERENCE " See: xcmPrtInterpPageSizeErrorPolicy See: xcmPrtInterpMediaTypeErrPolicy" DEFVAL { 0 } ::= { xcmPrtInterpreterEntry 32 } xcmPrtInterpLineTerm OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Enables adding a Carriage Return after every Line Feed. The value 'On' indicates that a Carriage Return will be added after every Line Feed. Usage example: This is a useful feature when printing text jobs via PCL through a standard queue in UNIX. The value 'other' shall mean not specified." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 33 } -- -- The Printer MIB Interpreter Group Extension for a specific product -- (xcmPrtInterpProdSpecific01Group) -- -- This group logically augments the Printer MIB's prtInterpreter group, -- and is a continuation of the xcmPrtInterpGroup. These objects are -- considered specific to one product, and have therefore been put into -- one group. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtInterpAutoContinue OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " This object controls whether the printer resumes printing after a system error occurs. When set to Off, the printer does not automatically resume. Manual intervention must occur for the printer to resume. When set to On, the printer automatically resumes operation after certain system errors. The On setting is useful in a networked environment. The value 'other' shall mean not specified." REFERENCE " DocuPrint 4517 Network Laser Printers User Guide, Pg. D-3." DEFVAL { other } -- not specified ::= { xcmPrtInterpreterEntry 50 } xcmPrtInterpEnvFeederSize OBJECT-TYPE SYNTAX XcmPrtMediumSize MAX-ACCESS read-create STATUS current DESCRIPTION " This object informs the printer what size of envelope is currently loaded in the envelope feeder. Because the input tray feeding envelopes may not have a size sensor, this setting is required so that the printer is able to know when the size of envelope requested for printing is different than that loaded. When the sizes do not match, and xcmPrtInterpPageSizeErrorPolicy is set to Off, the printer displays a message asking for a change of envelope size. The XcmPrtPaperSize selected should be that of an envelope." REFERENCE " DocuPrint 4517 Network Laser Printers User Guide, Pg. D-16." DEFVAL { notSpecified } ::= { xcmPrtInterpreterEntry 51 } xcmPrtInterpManualFeedPgSize OBJECT-TYPE SYNTAX XcmPrtMediumSize MAX-ACCESS read-create STATUS current DESCRIPTION " This object sets the default medium size of the manual input tray for this interpreter." REFERENCE " DocuPrint 4517 Network Laser Printers User Guide, Pg. D-10." DEFVAL { notSpecified } ::= { xcmPrtInterpreterEntry 52 } xcmPrtInterpOffsetStackingType OBJECT-TYPE SYNTAX XcmPrtOutputOffsetStackingType MAX-ACCESS read-create STATUS current DESCRIPTION " This object further refines the type of offset stacking from that specified by the object prtOutputOffsetStacking in the Printer MIB. Printers who need to specify OffsetStackingType by interpreter shall set this object to 'other'. To specify OffsetStackingType by interpreter, use the object xcmPrtOutputOffsetStackingType." REFERENCE " See: prtOutputOffsetStacking. See: xcmPrtOutputOffsetStackingType" DEFVAL { notSpecified } ::= { xcmPrtInterpreterEntry 53 } -- The Printer MIB Extension Input Alias Group (xcmPrtInputAliasGroup) -- -- This table maps alternate names to entries in the Input Group -- and optionally enables an alternate tray switching sequence. -- -- Implementation of every object in this group is conditionally -- mandatory: mandatory for printers whose interpreters support -- such alternate input naming capability through SNMP. -- In other words, if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtInputAliasTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtInputAliasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines one or more aliases for input sub-units defined in the Input Group." ::= { xcmPrtInputAlias 1 } xcmPrtInputAliasEntry OBJECT-TYPE SYNTAX XcmPrtInputAliasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " One or more entries may exist corresponding to each entry in the prtInputTable." INDEX { hrDeviceIndex, prtInterpreterIndex, xcmPrtInputAliasIndex } ::= { xcmPrtInputAliasTable 1 } XcmPrtInputAliasEntry ::= SEQUENCE { xcmPrtInputAliasIndex Cardinal32, xcmPrtInputAliasRowStatus RowStatus, xcmPrtInputAliasName XcmFixedLocaleDisplayString (SIZE(0..63)), xcmPrtInputAliasSwitchProgram DisplayString (SIZE(0..255)) } xcmPrtInputAliasIndex OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " A unique value used to identify this row in the xcmPrtInputAliasTable." ::= { xcmPrtInputAliasEntry 1 } xcmPrtInputAliasRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtInputAliasTable." ::= { xcmPrtInputAliasEntry 2 } xcmPrtInputAliasName OBJECT-TYPE SYNTAX XcmFixedLocaleDisplayString (SIZE(0..63)) MAX-ACCESS read-create STATUS current DESCRIPTION " Defines an alternate name for the input source. This is in addition to the prtInputName from the Input Group. Typical usage is to map an interpreter specific name to the sub-unit name in the Input Group, e.g., PCL's 'upper' to the device input name 'main'." DEFVAL { ''H } -- unspecified ::= { xcmPrtInputAliasEntry 3 } xcmPrtInputAliasSwitchProgram OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION " The input tray switching program for this 'InputAliasName' presented in a '.' separated list of prtInputIndex values. For example, the string '1.4.3' indicates start with the input tray represented by prtInputIndex 1, if it becomes empty switch to prtInputIndex 4, when it becomes empty switch to prtInputIndex 3, if it becomes empty then wait for operator intervention. An empty string shall indicate unspecified." DEFVAL { ''H } -- unspecified ::= { xcmPrtInputAliasEntry 4 } -- -- The Printer MIB Extension PCL Interpreter group -- (xcmPrtInterpPCLGroup) -- -- This group provides for setting and reading the PCL-Specific -- Variables in PJL. The one PCL-Specific PJL variable not found in -- this particular group, 'SYMSET', is managed using the Printer MIB's -- object prtInterpreterDefaultCharSetIn. -- See: PCL 5 Printer Language Technical Reference Manual -- See: PCL 5 Comparison Guide by Hewlett-Packard Corporation -- See: PJL Technical Reference Manual - SYMSET -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtInterpPCLTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtInterpPCLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is an extension to the prtInterpPCLTable." ::= { xcmPrtInterpPCL 1 } xcmPrtInterpPCLEntry OBJECT-TYPE SYNTAX XcmPrtInterpPCLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists corresponding to each entry in the xcmPrtInterpPCLTable." INDEX { hrDeviceIndex, prtInterpreterIndex } ::= { xcmPrtInterpPCLTable 1 } XcmPrtInterpPCLEntry ::= SEQUENCE { -- xcmPrtInterpPCLGroup xcmPrtInterpPCLRowStatus RowStatus, xcmPrtInterpPCLFontSourceDflt XcmPrtPCLFontSource, xcmPrtInterpPCLFontNumberDflt Cardinal32, xcmPrtInterpPCLPitchNumerator Cardinal32, xcmPrtInterpPCLPitchDenominator Cardinal32, xcmPrtInterpPCLPtSizeNumerator Cardinal32, xcmPrtInterpPCLPtSizeDenominatr Cardinal32, -- xcmPrtInterpPCLProdSpecificGroup xcmPrtInterpPCLPrintScreen XcmPrtPrintScreen } xcmPrtInterpPCLRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtInterpPCLTable." ::= { xcmPrtInterpPCLEntry 1 } xcmPrtInterpPCLFontSourceDflt OBJECT-TYPE SYNTAX XcmPrtPCLFontSource MAX-ACCESS read-create STATUS current DESCRIPTION " This object provides the PCL-specific PJL variable 'FONTSOURCE'. 'FONTSOURCE' specifies the device location of the default font in PCL." REFERENCE " See: PJL Technical Reference Manual- FONTSOURCE" DEFVAL { notSpecified } ::= { xcmPrtInterpPCLEntry 2 } xcmPrtInterpPCLFontNumberDflt OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object provides the PCL-specific PJL variable 'FONTNUMBER'. In PCL, 'FONTNUMBER' specifies the ID of the default font within the default FONTSOURCE." REFERENCE " See: PJL Technical Reference Manual - FONTNUMBER" DEFVAL { 0 } -- unspecified ::= { xcmPrtInterpPCLEntry 3 } xcmPrtInterpPCLPitchNumerator OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object along with xcmPrtInterpPCLPitchDenominator sets the default for the PCL-specific PJL variable 'PITCH. These two object sets the default pitch size for the PCL default font defined in xcmPrtInterpreterPCLFontNumberDflt. This variable only applies when the default font specified is a scalable fixed pitch font. A value of zero shall mean not specified." REFERENCE " See: PCL 5 Printer Language Technical Reference Manual See: PJL Technical Reference Manual - PITCH See: xcmPrtInterpPCLPitchDenominator" DEFVAL { 0 } -- not specified ::= { xcmPrtInterpPCLEntry 4 } xcmPrtInterpPCLPitchDenominator OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object along with xcmPrtInterpPCLPitchNumerator sets the default for the PCL-specific PJL variable 'PITCH'. These two object sets the default pitch size for the PCL default font defined in xcmPrtInterpreterPCLFontNumberDflt. The PITCH variable only applies when the default font specified is a scalable fixed pitch font. A value of zero shall mean not specified. It is expected that a typical application will set xcmPrtInterpPCLPitchDenominator to 100." REFERENCE " See: PCL 5 Printer Language Technical Reference Manual See: PJL Technical Reference Manual - PITCH See: xcmPrtInterpPCLPitchNumerator" DEFVAL { 100 } ::= { xcmPrtInterpPCLEntry 5 } xcmPrtInterpPCLPtSizeNumerator OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object along with xcmPrtInterpPCLPtSizeDenominatr sets the default for the PCL-specific PJL variable 'PTSIZE'. The PTSIZE variable only applies when the FONTNUMBER setting specifies a scalable proportionally-spaced font. The size is in units of printer's points, which units are here considered to be exactly 1/72 of an inch. The value zero shall mean not specified." REFERENCE " See: PJL Technical Reference Manual - PTSIZE See: PCL 5 Printer Language Technical Reference Manual See: xcmPrtInterpPCLPtSizeDenominatr" DEFVAL { 0 } -- Not specified ::= { xcmPrtInterpPCLEntry 6 } xcmPrtInterpPCLPtSizeDenominatr OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object along with xcmPrtInterpPCLPtSizeNumerator sets the default for the PCL-specific PJL variable 'PTSIZE'. The PTSIZE variable only applies when the FONTNUMBER setting specifies a scalable proportionally-spaced font. The value zero shall mean not specified. It is expected that a typical application will set this object to the value 4. For example, if the denominator is set to 4, describe a PtSize of 8.5, xcmPrtInterpPCLPtSizeNominator must be set to 34." REFERENCE " See: PCL 5 Printer Language Technical Reference Manual See: PJL Technical Reference Manual - PTSIZE See: xcmPrtInterpPCLPtSizeNumerator" DEFVAL { 4 } -- Specifies Units of 0.25 Points ::= { xcmPrtInterpPCLEntry 7 } -- The Printer MIB Interpreter PCL Group Ext. for product specific -- implementations. -- (xcmPrtInterpPCLProdSpecificGroup) -- -- This group is a continuation of the xcmPrtInterpPCLGroup. -- These objects are considered specific to one product. -- -- Implementation of any object in this group is optional. -- xcmPrtInterpPCLPrintScreen OBJECT-TYPE SYNTAX XcmPrtPrintScreen MAX-ACCESS read-create STATUS current DESCRIPTION " This object sets a special mode for 80 character screen dumps." DEFVAL { off } ::= { xcmPrtInterpPCLEntry 50 } -- The Printer MIB Extension Auxiliary Package Group -- (xcmPrtAuxPackageGroup) -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the XCMI MIB, the agent shall also implement -- this group in order to claim XCMI conformance. -- xcmPrtAuxPackageTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtAuxPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table lists Auxiliary Sheets enabled for this printer." ::= { xcmPrtAuxPackage 1 } xcmPrtAuxPackageEntry OBJECT-TYPE SYNTAX XcmPrtAuxPackageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists corresponding to each entry in the xcmPrtAuxPackageTable." INDEX { hrDeviceIndex, xcmPrtAuxPackageIndex } ::= { xcmPrtAuxPackageTable 1 } XcmPrtAuxPackageEntry ::= SEQUENCE { -- xcmPrtAuxPackageGroup xcmPrtAuxPackageIndex Cardinal32, xcmPrtAuxPackageRowStatus RowStatus, xcmPrtAuxPackageType XcmPrtAuxSheetType, xcmPrtAuxPackageContent XcmPrtAuxSheetContent, xcmPrtAuxPackagePrtInputIndex Cardinal32, xcmPrtAuxPackageNext Cardinal32 } xcmPrtAuxPackageIndex OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " A unique value used by the printer to identify this Auxiliary Sheet." ::= { xcmPrtAuxPackageEntry 1 } xcmPrtAuxPackageRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the xcmPrtAuxPackageTable." ::= { xcmPrtAuxPackageEntry 2 } xcmPrtAuxPackageType OBJECT-TYPE SYNTAX XcmPrtAuxSheetType MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies the Auxiliary Sheet type associated with this row." DEFVAL { notSpecified } ::= { xcmPrtAuxPackageEntry 3 } xcmPrtAuxPackageContent OBJECT-TYPE SYNTAX XcmPrtAuxSheetContent MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies the information content of this auxiliary sheet. The value zero shall mean notSpecified." DEFVAL { notSpecified } ::= { xcmPrtAuxPackageEntry 4 } xcmPrtAuxPackagePrtInputIndex OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies the input tray the printer shall use in printing this auxiliary sheet. The value zero shall mean notSpecified." DEFVAL { 0 } -- notSpecified ::= { xcmPrtAuxPackageEntry 5 } xcmPrtAuxPackageNext OBJECT-TYPE SYNTAX Cardinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " Provides the index of the next Auxiliary Sheet declared for this printer. This provides a linking mechanism to group auxiliary pages. The last auxiliary page to be declared will set this xcmPrtAuxPackageNext object to zero, meaning no further sheets. The value zero shall mean notPresent." DEFVAL { 0 } -- notPresent or no further auxiliary sheets ::= { xcmPrtAuxPackageEntry 6 } -- -- Medium Type Supported Group (Conditionally Mandatory)' -- (xcmPrtMediumTypeSupportedGroup) -- -- Implementation of this group conditionally mandatory for all systems. -- xcmPrtMedmTypeSupTable OBJECT-TYPE SYNTAX SEQUENCE OF XcmPrtMedmTypeSupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table of specific and general medium 'types' which are associated with this host system." ::= { xcmPrtMediumTypeSupported 2 } xcmPrtMedmTypeSupEntry OBJECT-TYPE SYNTAX XcmPrtMedmTypeSupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry for a specific or general medium 'types' which is associated with this host system." INDEX { hrDeviceIndex, xcmPrtMedmTypeSupIndex } ::= { xcmPrtMedmTypeSupTable 1 } XcmPrtMedmTypeSupEntry ::= SEQUENCE { xcmPrtMedmTypeSupIndex Ordinal32, xcmPrtMedmTypeSupRowStatus RowStatus, xcmPrtMedmTypeSupRowPersistence XcmGenRowPersistence, xcmPrtMedmTypeSupName XcmFixedLocaleDisplayString (SIZE(0..255)) } xcmPrtMedmTypeSupIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " A unique value used to identify this medium type supported." ::= { xcmPrtMedmTypeSupEntry 1 } xcmPrtMedmTypeSupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the 'xcmPrtMedmTypeSupTable'." ::= { xcmPrtMedmTypeSupEntry 2 } xcmPrtMedmTypeSupRowPersistence OBJECT-TYPE SYNTAX XcmGenRowPersistence MAX-ACCESS read-create STATUS current DESCRIPTION " Indicates persistence of this row, from the given enumeration." DEFVAL { unknown } ::= { xcmPrtMedmTypeSupEntry 3 } xcmPrtMedmTypeSupName OBJECT-TYPE SYNTAX XcmFixedLocaleDisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION " Named 'type' of this medium instance." REFERENCE " See: prtInputMediaType" DEFVAL { ''H } ::= { xcmPrtMedmTypeSupEntry 4 } -- -- Conformance Information -- xcmPrtMIBConformance OBJECT IDENTIFIER ::= { xcmPrintMIB 2 } -- -- Compliance statements -- xcmPrtMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION " The compliance statement for agents that implement the printer MIB extension module." MODULE -- this module MANDATORY-GROUPS { xcmPrtBaseGroup } -- -- Compliance Statements for the Conditionally Mandatory Groups. -- GROUP xcmPrtGeneralGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtGeneralAuxSheetGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtGeneralProdSpecificGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtInputGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtOutputGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtChannelGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtChannelProdSpecificGroup DESCRIPTION " Implementation of this group is optional." GROUP xcmPrtInterpreterGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtInterpProdSpecificGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtInputAliasGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtAuxPackageGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtMediumTypeSupportedGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtInterpPCLGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP xcmPrtInterpPCLProdSpecificGroup DESCRIPTION " Implementation of this group is conditionally mandatory." -- -- MIN Compliance statements for the xcmPrtBaseGroup -- OBJECT xcmPrtBaseRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." -- -- MIN Compliance statements for the xcmPrtGeneralGroup -- OBJECT xcmPrtGeneralRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtGeneralAuxSheetPackage MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralManualFeedTimeout MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralInputAutoSwitch MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralOutputAutoSwitch MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralMediumClassDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralDarknessLevels MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralDarknessLevelNorm MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralDarknessLevelDflt MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralHexDumpEnable MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN Compliance statements for the xcmPrtGeneralAuxSheetGroup -- OBJECT xcmPrtGeneralStartupPage MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtGeneralBannerPage MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN Compliance statements for xcmPrtGeneralProdSpecificGroup -- OBJECT xcmPrtGeneralScanlineCompaction MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN Compliance statements for the xcmPrtInputGroup -- OBJECT xcmPrtInputRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtInputNextPrtInputIndex MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN Compliance statements for the xcmPrtOutputGroup -- OBJECT xcmPrtOutputRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtOutputNextIndex MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtOutputPassword SYNTAX OCTET STRING (SIZE(0..16)) MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtOutputOffsetStackingType MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtOutputTrayTimeoutSupport MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtOutputTrayTimeout MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtChannelGroup -- OBJECT xcmPrtChannelRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtChannelEOJTimeout MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtChannelAuxSheetPackage MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtChannelSpoolingEnable MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtChannelLangSensing MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtChannelProdSpecificGroup -- OBJECT xcmPrtChannelAutoJobEnd MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtInterpreterGroup -- OBJECT xcmPrtInterpRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtInterpAuxSheetPackage MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpContextSaving MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpEdgeEnhancement MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpFontIndexDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpGrayLevels MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpGrayLevelDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpJamRecovery MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpJobCopiesDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpLineWrap MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpMediumSizeDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPageProtect MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPageProtectSize MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPageSizeErrorPolicy MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPlexSupported MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPlexDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPrintEdgeToEdge MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPrintQuality MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPrtInputIndexDflt MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPrtOutputIndexDflt MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpResFeedDirDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpResXFeedDirDefault MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpResIPResIndex MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpResIPResIndexDflt MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpTextFormLength MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpTimeoutJob MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpTimeoutPage MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpInputAliasIndexDflt MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpTraySwitch MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpMediumTypeDefault SYNTAX XcmFixedLocaleDisplayString (SIZE(0..16)) MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpMediaTypeErrPolicy MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpErrorPolicyTimeout MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpLineTerm MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtInterpProdSpecificGroup -- OBJECT xcmPrtInterpAutoContinue MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpEnvFeederSize MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpManualFeedPgSize MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpOffsetStackingType MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtInputAliasGroup -- OBJECT xcmPrtInputAliasRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtInputAliasName MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInputAliasSwitchProgram MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtInterpPCLGroup -- OBJECT xcmPrtInterpPCLRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtInterpPCLFontSourceDflt MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPCLFontNumberDflt MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPCLPitchNumerator MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPCLPitchDenominator MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPCLPtSizeNumerator MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtInterpPCLPtSizeDenominatr MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtInterpPCLProdSpecificGroup -- OBJECT xcmPrtInterpPCLPrintScreen MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtAuxPackageGroup -- OBJECT xcmPrtAuxPackageRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtAuxPackageType MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtAuxPackageContent MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtAuxPackagePrtInputIndex MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtAuxPackageNext MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." -- -- MIN-ACCESS statements for the xcmPrtMediumTypeSupportedGroup -- OBJECT xcmPrtMedmTypeSupRowStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1)." OBJECT xcmPrtMedmTypeSupRowPersistence MIN-ACCESS read-only DESCRIPTION "It is conformant to implement this object read-only." OBJECT xcmPrtMedmTypeSupName SYNTAX XcmFixedLocaleDisplayString (SIZE(0..16)) MIN-ACCESS read-only DESCRIPTION " It is conformant to implement this object read-only and with a reduced string length." ::= { xcmPrtMIBConformance 1 } xcmPrtMIBGroups OBJECT IDENTIFIER ::= { xcmPrtMIBConformance 2 } xcmPrtBaseGroup OBJECT-GROUP OBJECTS { xcmPrtBaseRowStatus, xcmPrtBaseGroupSupport, xcmPrtBaseUpdateSupport, xcmPrtBaseCreateSupport, xcmPrtBaseIETFMIBGroupSupport, xcmPrtBaseIETFMIBUpdateSupport, xcmPrtBaseIETFMIBCreateSupport } STATUS current DESCRIPTION " The general printer group extension." ::= { xcmPrtMIBGroups 1 } xcmPrtGeneralGroup OBJECT-GROUP OBJECTS { xcmPrtGeneralRowStatus, xcmPrtGeneralAuxSheetPackage, xcmPrtGeneralManualFeedTimeout, xcmPrtGeneralInputAutoSwitch, xcmPrtGeneralOutputAutoSwitch, xcmPrtGeneralMediumClassDefault, xcmPrtGeneralDarknessLevels, xcmPrtGeneralDarknessLevelNorm, xcmPrtGeneralDarknessLevelDflt, xcmPrtGeneralHexDumpEnable } STATUS current DESCRIPTION " The general printer group extension." ::= { xcmPrtMIBGroups 5 } xcmPrtInputGroup OBJECT-GROUP OBJECTS { xcmPrtInputRowStatus, xcmPrtInputNextPrtInputIndex } STATUS current DESCRIPTION " The input group extension." ::= { xcmPrtMIBGroups 8 } xcmPrtOutputGroup OBJECT-GROUP OBJECTS { xcmPrtOutputRowStatus, xcmPrtOutputNextIndex, xcmPrtOutputPassword, xcmPrtOutputOffsetStackingType, xcmPrtOutputTrayTimeoutSupport, xcmPrtOutputTrayTimeout } STATUS current DESCRIPTION " The output group extension." ::= { xcmPrtMIBGroups 9 } xcmPrtChannelGroup OBJECT-GROUP OBJECTS { xcmPrtChannelRowStatus, xcmPrtChannelEOJTimeout, xcmPrtChannelAuxSheetPackage, xcmPrtChannelSpoolingEnable, xcmPrtChannelLangSensing } STATUS current DESCRIPTION " The Channel group extension." ::= { xcmPrtMIBGroups 14 } xcmPrtInterpreterGroup OBJECT-GROUP OBJECTS { xcmPrtInterpRowStatus, xcmPrtInterpAuxSheetPackage, xcmPrtInterpContextSaving, xcmPrtInterpEdgeEnhancement, xcmPrtInterpFontIndexDefault, xcmPrtInterpGrayLevels, xcmPrtInterpGrayLevelDefault, xcmPrtInterpJamRecovery, xcmPrtInterpJobCopiesDefault, xcmPrtInterpLineWrap, xcmPrtInterpMediumSizeDefault, xcmPrtInterpPageProtect, xcmPrtInterpPageProtectSize, xcmPrtInterpPageSizeErrorPolicy, xcmPrtInterpPlexSupported, xcmPrtInterpPlexDefault, xcmPrtInterpPrintEdgeToEdge, xcmPrtInterpPrintQuality, xcmPrtInterpPrtInputIndexDflt, xcmPrtInterpPrtOutputIndexDflt, xcmPrtInterpResFeedDirDefault, xcmPrtInterpResXFeedDirDefault, xcmPrtInterpResIPResIndex, xcmPrtInterpResIPResIndexDflt, xcmPrtInterpTextFormLength, xcmPrtInterpTimeoutJob, xcmPrtInterpTimeoutPage, xcmPrtInterpInputAliasIndexDflt, xcmPrtInterpTraySwitch, xcmPrtInterpMediumTypeDefault, xcmPrtInterpMediaTypeErrPolicy, xcmPrtInterpErrorPolicyTimeout, xcmPrtInterpLineTerm } STATUS current DESCRIPTION " The interpreter group extension." ::= { xcmPrtMIBGroups 15 } xcmPrtInputAliasGroup OBJECT-GROUP OBJECTS { xcmPrtInputAliasRowStatus, xcmPrtInputAliasName, xcmPrtInputAliasSwitchProgram } STATUS current DESCRIPTION " The Input Alias group." ::= { xcmPrtMIBGroups 50 } xcmPrtGeneralAuxSheetGroup OBJECT-GROUP OBJECTS { xcmPrtGeneralStartupPage, xcmPrtGeneralBannerPage } STATUS current DESCRIPTION " The General Auxiliary Sheet group." ::= { xcmPrtMIBGroups 52 } xcmPrtGeneralProdSpecificGroup OBJECT-GROUP OBJECTS { xcmPrtGeneralScanlineCompaction } STATUS current DESCRIPTION " The general printer product specific group." ::= { xcmPrtMIBGroups 55 } xcmPrtAuxPackageGroup OBJECT-GROUP OBJECTS { xcmPrtAuxPackageRowStatus, xcmPrtAuxPackageType, xcmPrtAuxPackageContent, xcmPrtAuxPackagePrtInputIndex, xcmPrtAuxPackageNext } STATUS current DESCRIPTION " The Auxiliary Package group." ::= { xcmPrtMIBGroups 60 } xcmPrtChannelProdSpecificGroup OBJECT-GROUP OBJECTS { xcmPrtChannelAutoJobEnd } STATUS current DESCRIPTION " The Channel group extension for prod specific objects." ::= { xcmPrtMIBGroups 64 } xcmPrtInterpProdSpecificGroup OBJECT-GROUP OBJECTS { xcmPrtInterpAutoContinue, xcmPrtInterpOffsetStackingType, xcmPrtInterpEnvFeederSize, xcmPrtInterpManualFeedPgSize } STATUS current DESCRIPTION " The interpreter group extension." ::= { xcmPrtMIBGroups 65 } xcmPrtInterpPCLGroup OBJECT-GROUP OBJECTS { xcmPrtInterpPCLRowStatus, xcmPrtInterpPCLFontSourceDflt, xcmPrtInterpPCLFontNumberDflt, xcmPrtInterpPCLPitchNumerator, xcmPrtInterpPCLPitchDenominator, xcmPrtInterpPCLPtSizeNumerator, xcmPrtInterpPCLPtSizeDenominatr } STATUS current DESCRIPTION " The Interpreter PCL group." ::= { xcmPrtMIBGroups 70 } xcmPrtInterpPCLProdSpecificGroup OBJECT-GROUP OBJECTS { xcmPrtInterpPCLPrintScreen } STATUS current DESCRIPTION " The Interpreter PCL Product Specific group." ::= { xcmPrtMIBGroups 71 } xcmPrtMediumTypeSupportedGroup OBJECT-GROUP OBJECTS { xcmPrtMedmTypeSupRowStatus, xcmPrtMedmTypeSupRowPersistence, xcmPrtMedmTypeSupName } STATUS current DESCRIPTION " The Medium Type Supported group." ::= { xcmPrtMIBGroups 75 } END