-- ***************************************************************** -- TN3270E Response Time MIB -- -- September 1998, Vince Deters -- -- Copyright (c) 1998,2005 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** TN3270E-RT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32, Unsigned32 FROM SNMPv2-SMI RowStatus, DateAndTime, TimeStamp, TestAndIncr FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF tn3270eSrvrConfIndex, tn3270eClientGroupName, tn3270eResMapElementType FROM TN3270E-MIB IANATn3270eAddrType, IANATn3270eAddress FROM IANATn3270eTC-MIB snanauMIB FROM SNA-NAU-MIB; tn3270eRtMIB MODULE-IDENTITY LAST-UPDATED "200601130000Z" ORGANIZATION "TN3270E Working Group" CONTACT-INFO "Kenneth White (kennethw@vnet.ibm.com) IBM Corp. - Dept. BRQA/Bldg. 501/G114 P.O. Box 12195 3039 Cornwallis RTP, NC 27709-2195 Robert Moore (remoore@us.ibm.com) IBM Corp. - Dept. BRQA/Bldg. 501/G114 P.O. Box 12195 3039 Cornwallis RTP, NC 27709-2195 (919) 254-4436" DESCRIPTION "This module defines a portion of the management information base (MIB) that enables monitoring of TN3270 and TN3270E clients' response times by a TN3270E server." REVISION "200601130000Z" DESCRIPTION "Removed the IMPORTing of Unsigned32 from CISCO-TC, by changing it back to be IMPORTed from SNMPv2-SMI (as in RFC 2562)." REVISION "9807270000Z" -- July 27, 1998 DESCRIPTION "Initial version, published as RFC 2562." ::= { snanauMIB 9 } -- snanauMIB ::= { mib-2 34 } -- Top level structure of the MIB tn3270eRtNotifications OBJECT IDENTIFIER ::= { tn3270eRtMIB 0 } tn3270eRtObjects OBJECT IDENTIFIER ::= { tn3270eRtMIB 1 } tn3270eRtConformance OBJECT IDENTIFIER ::= { tn3270eRtMIB 3 } -- MIB Objects -- Response Time Control Table tn3270eRtCollCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eRtCollCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The response time monitoring collection control table, which allows a management application to control the types of response time data being collected, and the clients for which it is being collected. This table is indexed by tn3270eSrvrConfIndex and tn3270eClientGroupName imported from the TN3270E-MIB. tn3270eSrvrConfIndex indicates within a host which TN3270E server an entry applies to. tn3270eClientGroupName it identifies the set of IP clients for which response time data is being collected. The particular IP clients making up the set are identified in the tn3270eClientGroupTable in the TN3270E-MIB." ::= { tn3270eRtObjects 1} tn3270eRtCollCtlEntry OBJECT-TYPE SYNTAX Tn3270eRtCollCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the TN3270E response time monitoring collection control table. To handle the case of multiple TN3270E servers on the same host, the first index of this table is the tn3270eSrvrConfIndex from the TN3270E-MIB." INDEX { tn3270eSrvrConfIndex, -- Server's index tn3270eClientGroupName } -- What to collect on ::= { tn3270eRtCollCtlTable 1 } Tn3270eRtCollCtlEntry ::= SEQUENCE { -- tn3270eRtCollCtlType BITS, tn3270eRtCollCtlType OCTET STRING, tn3270eRtCollCtlSPeriod Unsigned32, tn3270eRtCollCtlSPMult Unsigned32, tn3270eRtCollCtlThreshHigh Unsigned32, tn3270eRtCollCtlThreshLow Unsigned32, tn3270eRtCollCtlIdleCount Unsigned32, tn3270eRtCollCtlBucketBndry1 Unsigned32, tn3270eRtCollCtlBucketBndry2 Unsigned32, tn3270eRtCollCtlBucketBndry3 Unsigned32, tn3270eRtCollCtlBucketBndry4 Unsigned32, tn3270eRtCollCtlRowStatus RowStatus } -- The OID { tn3270eRtCollCtlEntry 1 } is not used tn3270eRtCollCtlType OBJECT-TYPE -- SYNTAX BITS { -- aggregate(0), -- excludeIpComponent(1), -- ddr(2), -- average(3), -- buckets(4), -- traps(5) -- } SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls what types of response time data to collect, whether to summarize the data across the members of a client group or keep it individually, whether to introduce dynamic definite responses, and whether to generate traps. aggregate(0) - Aggregate response time data for the client group as a whole. If this bit is set to 0, then maintain response time data separately for each member of the client group. excludeIpComponent(1) - Do not include the IP-network component in any response times. ddr(2) - Enable dynamic definite response. average(3) - Produce an average response time based on a specified collection interval. buckets(4) - Maintain tn3270eRtDataBucket values in a corresponding tn3270eRtDataEntry, based on the bucket boundaries specified in the tn3270eRtCollCtlBucketBndry objects . traps(5) - generate the notifications specified in this MIB module. The tn3270eRtExceeded and tn3270eRtOkay notifications are generated only if average(3) is also specified." ::= { tn3270eRtCollCtlEntry 2 } tn3270eRtCollCtlSPeriod OBJECT-TYPE SYNTAX Unsigned32 (15..86400) -- 15 second min, 24 hour max UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds that defines the sample period. The actual interval is defined as tn3270eRtCollCtlSPeriod times tn3270eRtCollCtlSPMult. The value of this object is used only if the corresponding tn3270eRtCollCtlType has the average(3) setting." DEFVAL {20} -- 20 seconds ::= { tn3270eRtCollCtlEntry 3 } tn3270eRtCollCtlSPMult OBJECT-TYPE SYNTAX Unsigned32 (1..5760) -- 5760 x SPeriod of 15 is 24 hours UNITS "period" MAX-ACCESS read-create STATUS current DESCRIPTION "The sample period multiplier; this value is multiplied by the sample period, tn3270eRtCollCtlSPeriod, to determine the collection interval. Sliding-window average calculation can, if necessary, be disabled, by setting the sample period multiplier, tn3270eRtCollCtlSPMult, to 1, and setting the sample period, tn3270eRtCollCtlSPeriod, to the required collection interval. The value of this object is used only if the corresponding tn3270eRtCollCtlType has the average(3) setting." DEFVAL { 30 } -- yields an interval of 10 minutes when -- used with the default SPeriod value ::= { tn3270eRtCollCtlEntry 4 } tn3270eRtCollCtlThreshHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a tn3270eRtExceeded notification, signalling that a monitored total response time has exceeded the specified limit. A value of zero for this object suppresses generation of this notification. The value of this object is used only if the corresponding tn3270eRtCollCtlType has average(3) and traps(5) selected. A tn3270eRtExceeded notification is not generated again for a tn3270eRtDataEntry until an average response time falling below the low threshold tn3270eRtCollCtlThreshLow specified for the client group has occurred for the entry." DEFVAL { 0 } -- suppress notifications ::= { tn3270eRtCollCtlEntry 5 } tn3270eRtCollCtlThreshLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The threshold for generating a tn3270eRtOkay notification, signalling that a monitored total response time has fallen below the specified limit. A value of zero for this object suppresses generation of this notification. The value of this object is used only if the corresponding tn3270eRtCollCtlType has average(3) and traps(5) selected. A tn3270eRtOkay notification is not generated again for a tn3270eRtDataEntry until an average response time exceeding the high threshold tn3270eRtCollCtlThreshHigh specified for the client group has occurred for the entry." DEFVAL { 0 } -- suppress notifications ::= { tn3270eRtCollCtlEntry 6 } tn3270eRtCollCtlIdleCount OBJECT-TYPE SYNTAX Unsigned32 UNITS "transactions" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object is used to determine whether a sample that yields an average response time exceeding the value of tn3270eRtCollCtlThreshHigh was a statistically valid one. If the following statement is true, then the sample was statistically valid, and so a tn3270eRtExceeded notification should be generated: AvgCountTrans * ((AvgRt/ThreshHigh - 1) ** 2) >= IdleCount This comparison is done only if the corresponding tn3270eRtCollCtlType has average(3) and traps(5) selected." DEFVAL { 1 } ::= { tn3270eRtCollCtlEntry 7 } tn3270eRtCollCtlBucketBndry1 OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object defines the range of transaction response times counted in the Tn3270eRtDataBucket1Rts object: those less than or equal to this value." DEFVAL { 10 } ::= { tn3270eRtCollCtlEntry 8 } tn3270eRtCollCtlBucketBndry2 OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object, together with that of the tn3270eRtCollCtlBucketBndry1 object, defines the range of transaction response times counted in the Tn3270eRtDataBucket2Rts object: those greater than the value of the tn3270eRtCollCtlBucketBndry1 object, and less than or equal to the value of this object." DEFVAL { 20 } ::= { tn3270eRtCollCtlEntry 9 } tn3270eRtCollCtlBucketBndry3 OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object, together with that of the tn3270eRtCollCtlBucketBndry2 object, defines the range of transaction response times counted in the Tn3270eRtDataBucket3Rts object: those greater than the value of the tn3270eRtCollCtlBucketBndry2 object, and less than or equal to the value of this object." DEFVAL { 50 } ::= { tn3270eRtCollCtlEntry 10 } tn3270eRtCollCtlBucketBndry4 OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object, together with that of the tn3270eRtCollCtlBucketBndry3 object, defines the range of transaction response times counted in the Tn3270eRtDataBucket4Rts object: those greater than the value of the tn3270eRtCollCtlBucketBndry3 object, and less than or equal to the value of this object. The value of this object also defines the range of transaction response times counted in the Tn3270eRtDataBucket5Rts object: those greater than the value of this object." DEFVAL { 100 } ::= { tn3270eRtCollCtlEntry 11 } tn3270eRtCollCtlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows entries to be created and deleted in the tn3270eRtCollCtlTable. An entry in this table is deleted by setting this object to destroy(6). Deleting an entry in this table has the side-effect of removing all entries from the tn3270eRtDataTable that are associated with the entry being deleted." ::= { tn3270eRtCollCtlEntry 12 } -- TN3270E Response Time Data Table tn3270eRtDataTable OBJECT-TYPE SYNTAX SEQUENCE OF Tn3270eRtDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The response time data table. Entries in this table are created based on entries in the tn3270eRtCollCtlTable." ::= { tn3270eRtObjects 2 } tn3270eRtDataEntry OBJECT-TYPE SYNTAX Tn3270eRtDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries in this table are created based upon the tn3270eRtCollCtlTable. When the corresponding tn3270eRtCollCtlType has aggregate(0) specified, a single entry is created in this table, with a tn3270eRtDataClientAddrType of unknown(0), a zero-length octet string value for tn3270eRtDataClientAddress, and a tn3270eRtDataClientPort value of 0. When aggregate(0) is not specified, a separate entry is created for each client in the group. Note that the following objects defined within an entry in this table can wrap: tn3270eRtDataTotalRts tn3270eRtDataTotalIpRts tn3270eRtDataCountTrans tn3270eRtDataCountDrs tn3270eRtDataElapsRnTrpSq tn3270eRtDataElapsIpRtSq tn3270eRtDataBucket1Rts tn3270eRtDataBucket2Rts tn3270eRtDataBucket3Rts tn3270eRtDataBucket4Rts tn3270eRtDataBucket5Rts" INDEX { tn3270eSrvrConfIndex, -- Server's local index tn3270eClientGroupName, -- Collection target tn3270eRtDataClientAddrType, tn3270eRtDataClientAddress, tn3270eRtDataClientPort } ::= { tn3270eRtDataTable 1 } Tn3270eRtDataEntry ::= SEQUENCE { tn3270eRtDataClientAddrType IANATn3270eAddrType, tn3270eRtDataClientAddress IANATn3270eAddress, tn3270eRtDataClientPort Unsigned32, tn3270eRtDataAvgRt Gauge32, tn3270eRtDataAvgIpRt Gauge32, tn3270eRtDataAvgCountTrans Gauge32, tn3270eRtDataIntTimeStamp DateAndTime, tn3270eRtDataTotalRts Counter32, tn3270eRtDataTotalIpRts Counter32, tn3270eRtDataCountTrans Counter32, tn3270eRtDataCountDrs Counter32, tn3270eRtDataElapsRndTrpSq Unsigned32, tn3270eRtDataElapsIpRtSq Unsigned32, tn3270eRtDataBucket1Rts Counter32, tn3270eRtDataBucket2Rts Counter32, tn3270eRtDataBucket3Rts Counter32, tn3270eRtDataBucket4Rts Counter32, tn3270eRtDataBucket5Rts Counter32, tn3270eRtDataRtMethod INTEGER, tn3270eRtDataDiscontinuityTime TimeStamp } tn3270eRtDataClientAddrType OBJECT-TYPE SYNTAX IANATn3270eAddrType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the type of address represented by the value of tn3270eRtDataClientAddress. The value unknown(0) is used if aggregate data is being collected for the client group." ::= { tn3270eRtDataEntry 1 } tn3270eRtDataClientAddress OBJECT-TYPE SYNTAX IANATn3270eAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the IP address of the TN3270 client being monitored. A zero-length octet string is used if aggregate data is being collected for the client group." ::= { tn3270eRtDataEntry 2 } tn3270eRtDataClientPort OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the client port number of the TN3270 client being monitored. The value 0 is used if aggregate data is being collected for the client group, or if the tn3270eRtDataClientAddrType identifies an address type that does not support ports." ::= { tn3270eRtDataEntry 3 } tn3270eRtDataAvgRt OBJECT-TYPE SYNTAX Gauge32 UNITS "tenths of seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average total response time measured over the last collection interval." DEFVAL { 0 } ::= { tn3270eRtDataEntry 4 } tn3270eRtDataAvgIpRt OBJECT-TYPE SYNTAX Gauge32 UNITS "tenths of seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The average IP response time measured over the last collection interval." DEFVAL { 0 } ::= { tn3270eRtDataEntry 5 } tn3270eRtDataAvgCountTrans OBJECT-TYPE SYNTAX Gauge32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "The sliding transaction count used for calculating the values of the tn3270eRtDataAvgRt and tn3270eRtDataAvgIpRt objects. The actual transaction count is available in the tn3270eRtDataCountTrans object. The initial value of this object, before any averages have been calculated, is 0." ::= { tn3270eRtDataEntry 6 } tn3270eRtDataIntTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of the last interval that tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, and tn3270eRtDataAvgCountTrans were calculated. Prior to the calculation of the first interval averages, this object returns the value 0x0000000000000000000000. When this value is returned, the remaining objects in the entry have no significance." ::= { tn3270eRtDataEntry 7 } tn3270eRtDataTotalRts OBJECT-TYPE SYNTAX Counter32 UNITS "tenths of seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the total response times collected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 8 } tn3270eRtDataTotalIpRts OBJECT-TYPE SYNTAX Counter32 UNITS "tenths of seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the total IP-network response times collected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 9 } tn3270eRtDataCountTrans OBJECT-TYPE SYNTAX Counter32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the total number of transactions detected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 10 } tn3270eRtDataCountDrs OBJECT-TYPE SYNTAX Counter32 UNITS "definite responses" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the total number of definite responses detected. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 11 } tn3270eRtDataElapsRndTrpSq OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds squared" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the elapsed round trip time squared. The sum of the squares is kept in order to enable calculation of a variance." DEFVAL { 0 } ::= { tn3270eRtDataEntry 12 } tn3270eRtDataElapsIpRtSq OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of seconds squared" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the elapsed IP round trip time squared. The sum of the squares is kept in order to enable calculation of a variance." DEFVAL { 0 } ::= { tn3270eRtDataEntry 13 } tn3270eRtDataBucket1Rts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the response times falling into bucket 1. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 14 } tn3270eRtDataBucket2Rts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the response times falling into bucket 2. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 15 } tn3270eRtDataBucket3Rts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the response times falling into bucket 3. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 16 } tn3270eRtDataBucket4Rts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the response times falling into bucket 4. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 17 } tn3270eRtDataBucket5Rts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of the response times falling into bucket 5. A management application can detect discontinuities in this counter by monitoring the tn3270eRtDataDiscontinuityTime object." ::= { tn3270eRtDataEntry 18 } tn3270eRtDataRtMethod OBJECT-TYPE SYNTAX INTEGER { none(0), responses(1), timingMark(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates the method that was used in calculating the IP network time. The value 'none(0) indicates that response times were not calculated for the IP network." ::= { tn3270eRtDataEntry 19 } tn3270eRtDataDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which one or more of this entry's counter objects suffered a discontinuity. This may happen if a TN3270E server is stopped and then restarted, and local methods are used to set up collection policy (tn3270eRtCollCtlTable entries)." ::= { tn3270eRtDataEntry 20 } tn3270eRtSpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "An advisory lock used to allow cooperating TN3270E-RT-MIB applications to coordinate their use of the tn3270eRtCollCtlTable. When creating a new entry or altering an existing entry in the tn3270eRtCollCtlTable, an application should make use of tn3270eRtSpinLock to serialize application changes or additions. Since this is an advisory lock, the use of this lock is not enforced." ::= { tn3270eRtObjects 3 } -- Notifications tn3270eRtExceeded NOTIFICATION-TYPE OBJECTS { tn3270eRtDataIntTimeStamp, tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, tn3270eRtDataAvgCountTrans, tn3270eRtDataRtMethod } STATUS current DESCRIPTION "This notification is generated when the average response time, tn3270eRtDataAvgRt, exceeds tn3270eRtCollCtlThresholdHigh at the end of a collection interval specified by tn3270eCollCtlSPeriod times tn3270eCollCtlSPMult. Note that the corresponding tn3270eCollCtlType must have traps(5) and average(3) set for this notification to be generated. In addition, tn3270eRtDataAvgCountTrans, tn3270eRtCollCtlThreshHigh, and tn3270eRtDataAvgRt are algorithmically compared to tn3270eRtCollCtlIdleCount for determination if this notification will be suppressed." ::= { tn3270eRtNotifications 1 } tn3270eRtOkay NOTIFICATION-TYPE OBJECTS { tn3270eRtDataIntTimeStamp, tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, tn3270eRtDataAvgCountTrans, tn3270eRtDataRtMethod } STATUS current DESCRIPTION "This notification is generated when the average response time, tn3270eRtDataAvgRt, falls below tn3270eRtCollCtlThresholdLow at the end of a collection interval specified by tn3270eCollCtlSPeriod times tn3270eCollCtlSPMult, after a tn3270eRtExceeded notification was generated. Note that the corresponding tn3270eCollCtlType must have traps(5) and average(3) set for this notification to be generated." ::= { tn3270eRtNotifications 2 } tn3270eRtCollStart NOTIFICATION-TYPE OBJECTS { tn3270eRtDataRtMethod, -- type of collection tn3270eResMapElementType -- type of resource } STATUS current DESCRIPTION "This notification is generated when response time data collection is enabled for a member of a client group. In order for this notification to occur the corresponding tn3270eRtCollCtlType must have traps(5) selected. tn3270eResMapElementType contains a valid value only if tn3270eRtDataClientAddress contains a valid address (rather than a zero-length octet string)." ::= { tn3270eRtNotifications 3 } tn3270eRtCollEnd NOTIFICATION-TYPE OBJECTS { tn3270eRtDataDiscontinuityTime, tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, tn3270eRtDataAvgCountTrans, tn3270eRtDataIntTimeStamp, tn3270eRtDataTotalRts, tn3270eRtDataTotalIpRts, tn3270eRtDataCountTrans, tn3270eRtDataCountDrs, tn3270eRtDataElapsRndTrpSq, tn3270eRtDataElapsIpRtSq, tn3270eRtDataBucket1Rts, tn3270eRtDataBucket2Rts, tn3270eRtDataBucket3Rts, tn3270eRtDataBucket4Rts, tn3270eRtDataBucket5Rts, tn3270eRtDataRtMethod } STATUS current DESCRIPTION "This notification is generated when an tn3270eRtDataEntry is deleted after being active (actual data collected), in order to enable a management application monitoring an tn3270eRtDataEntry to get the entry's final values. Note that the corresponding tn3270eCollCtlType must have traps(5) set for this notification to be generated." ::= { tn3270eRtNotifications 4 } -- Conformance Statement tn3270eRtGroups OBJECT IDENTIFIER ::= { tn3270eRtConformance 1 } tn3270eRtCompliances OBJECT IDENTIFIER ::= { tn3270eRtConformance 2 } -- Compliance statements tn3270eRtCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents that support the TN327E-RT-MIB." MODULE -- this module MANDATORY-GROUPS { tn3270eRtGroup, tn3270eRtNotGroup } OBJECT tn3270eRtCollCtlType MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlSPeriod MIN-ACCESS read-only DESCRIPTION "The agent is not required to allow the user to change the default value of this object, and is allowed to use a different default." OBJECT tn3270eRtCollCtlSPMult MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlThreshHigh MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlThreshLow MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlIdleCount MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlBucketBndry1 MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlBucketBndry2 MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlBucketBndry3 MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlBucketBndry4 MIN-ACCESS read-only DESCRIPTION "The agent is not required to support a SET operation to this object in the absence of adequate security." OBJECT tn3270eRtCollCtlRowStatus SYNTAX INTEGER { active(1) -- subset of RowStatus } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." ::= {tn3270eRtCompliances 1 } -- Group definitions tn3270eRtGroup OBJECT-GROUP OBJECTS { tn3270eRtCollCtlType, tn3270eRtCollCtlSPeriod, tn3270eRtCollCtlSPMult, tn3270eRtCollCtlThreshHigh, tn3270eRtCollCtlThreshLow, tn3270eRtCollCtlIdleCount, tn3270eRtCollCtlBucketBndry1, tn3270eRtCollCtlBucketBndry2, tn3270eRtCollCtlBucketBndry3, tn3270eRtCollCtlBucketBndry4, tn3270eRtCollCtlRowStatus, tn3270eRtDataDiscontinuityTime, tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, tn3270eRtDataAvgCountTrans, tn3270eRtDataIntTimeStamp, tn3270eRtDataTotalRts, tn3270eRtDataTotalIpRts, tn3270eRtDataCountTrans, tn3270eRtDataCountDrs, tn3270eRtDataElapsRndTrpSq, tn3270eRtDataElapsIpRtSq, tn3270eRtDataBucket1Rts, tn3270eRtDataBucket2Rts, tn3270eRtDataBucket3Rts, tn3270eRtDataBucket4Rts, tn3270eRtDataBucket5Rts, tn3270eRtDataRtMethod, tn3270eRtSpinLock } STATUS current DESCRIPTION "This group is mandatory for all implementations that support the TN3270E-RT-MIB. " ::= { tn3270eRtGroups 1 } tn3270eRtNotGroup NOTIFICATION-GROUP NOTIFICATIONS { tn3270eRtExceeded, tn3270eRtOkay, tn3270eRtCollStart, tn3270eRtCollEnd } STATUS current DESCRIPTION "The notifications that must be supported when the TN3270E-RT-MIB is implemented. " ::= { tn3270eRtGroups 2 } END