NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB DEFINITIONS ::= BEGIN -- NETGEAR Quality of Service Diffserv Extensions MIB -- Copyright LVL7 Systems (2001-2005) All rights reserved. -- This SNMP Management Information Specification -- embodies LVL7 System's confidential and proprietary -- intellectual property. LVL7 Systems retains all title -- and ownership in the Specification including any revisions. -- This Specification is supplied "AS IS", LVL7 Systems -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. IMPORTS IpAddress, Integer32, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, StorageType, MacAddress FROM SNMPv2-TC InterfaceIndex FROM IF-MIB InetPortNumber FROM INET-ADDRESS-MIB DisplayString FROM RFC1213-MIB IndexInteger, IndexIntegerNextFree, IfDirection, diffServMeterEntry FROM DIFFSERV-MIB agentQOS FROM NETGEAR-QOS-MIB; agentQOSDiffServExtensions MODULE-IDENTITY LAST-UPDATED "200502231200Z" -- 23 Feb 2005 12:00:00 GMT ORGANIZATION "Netgear" CONTACT-INFO "" DESCRIPTION "" -- revision history REVISION "200502231200Z" -- 23 Feb 2005 12:00:00 GMT DESCRIPTION "Initial revision." ::= { agentQOS 6 } IpPrecedence ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "An IP Precedence value that may be used for marking a traffic stream." SYNTAX Integer32 (0..7) Cos ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The 802.1p header Class of Service field that may be used for marking a traffic streams. Also known as the Ethernet frame priority." SYNTAX Integer32 (0..7) CosOrAny ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The 802.1p header Class of Service field that may be used for discriminating among traffic streams. Also known as the Ethernet frame priority. The value -1 is used to indicate a wild card i.e. any value." SYNTAX Integer32 (-1 | 0..7) VlanIdOrAny ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The virtual LAN identifier (VLAN ID) that may be used to differentiate among traffic streams. The value -1 is used to indicate a wild card i.e. any value." SYNTAX Integer32 (-1 | 1..4094) EtypeOrAny ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "Ethertype value field that may be used to differentiate among traffic streams. The allowed value is 0x0600 to 0xFFFF, with a value of 0 used to indicate this object is not involved in the classifier entry." SYNTAX Unsigned32 (0 | 1536..65535) -- hex value 0x0600 to 0xFFFF agentDiffServMIBObjects OBJECT IDENTIFIER ::= { agentQOSDiffServExtensions 1 } agentDiffServMIBAdmin OBJECT IDENTIFIER ::= { agentQOSDiffServExtensions 2 } -- -- Classifiers -- agentDiffServClassifier OBJECT IDENTIFIER ::= { agentDiffServMIBObjects 1 } -- -- Auxiliary Multi-field Classification Table -- -- Classification based on different fields in the Layer 2 and IP headers. -- Functional Data Paths may share definitions by using the same entry. -- -- NOTE: This table is an alternative to the IP Multi-field Classification -- Table. -- agentDiffServAuxMfClfrNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for agentDiffServAuxMfClfrId , or a zero to indicate that none exist." ::= { agentDiffServClassifier 1 } agentDiffServAuxMfClfrTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDiffServAuxMfClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Auxiliary Multi-field Classifier filter entries that a system may use to identify IP traffic." ::= { agentDiffServClassifier 2 } agentDiffServAuxMfClfrEntry OBJECT-TYPE SYNTAX AgentDiffServAuxMfClfrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP Multi-field Classifier entry describes a single filter." INDEX { agentDiffServAuxMfClfrId } ::= { agentDiffServAuxMfClfrTable 1 } AgentDiffServAuxMfClfrEntry ::= SEQUENCE { agentDiffServAuxMfClfrId IndexInteger, agentDiffServAuxMfClfrDstAddr IpAddress, agentDiffServAuxMfClfrDstMask IpAddress, agentDiffServAuxMfClfrSrcAddr IpAddress, agentDiffServAuxMfClfrSrcMask IpAddress, agentDiffServAuxMfClfrProtocol Unsigned32, agentDiffServAuxMfClfrDstL4PortMin InetPortNumber, agentDiffServAuxMfClfrDstL4PortMax InetPortNumber, agentDiffServAuxMfClfrSrcL4PortMin InetPortNumber, agentDiffServAuxMfClfrSrcL4PortMax InetPortNumber, agentDiffServAuxMfClfrCos CosOrAny, agentDiffServAuxMfClfrTos OCTET STRING, agentDiffServAuxMfClfrTosMask OCTET STRING, agentDiffServAuxMfClfrDstMac MacAddress, agentDiffServAuxMfClfrDstMacMask MacAddress, agentDiffServAuxMfClfrSrcMac MacAddress, agentDiffServAuxMfClfrSrcMacMask MacAddress, agentDiffServAuxMfClfrVlanId VlanIdOrAny, agentDiffServAuxMfClfrStorage StorageType, agentDiffServAuxMfClfrStatus RowStatus, agentDiffServAuxMfClfrCos2 CosOrAny, agentDiffServAuxMfClfrEtypeVal1 EtypeOrAny, agentDiffServAuxMfClfrEtypeVal2 EtypeOrAny, agentDiffServAuxMfClfrVlanIdMin Unsigned32, agentDiffServAuxMfClfrVlanIdMax Unsigned32, agentDiffServAuxMfClfrVlanId2Min Unsigned32, agentDiffServAuxMfClfrVlanId2Max Unsigned32 } agentDiffServAuxMfClfrId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading agentDiffServAuxMfClfrNextFree." ::= { agentDiffServAuxMfClfrEntry 1 } agentDiffServAuxMfClfrDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to match against the packet's destination IP address." ::= { agentDiffServAuxMfClfrEntry 2 } agentDiffServAuxMfClfrDstMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any address." DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 3 } agentDiffServAuxMfClfrSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to match against the packet's source IP address." ::= { agentDiffServAuxMfClfrEntry 4 } agentDiffServAuxMfClfrSrcMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any address." DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 5 } agentDiffServAuxMfClfrProtocol OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP protocol to match against the IPv4 protocol number. A value of 255 means match all. " DEFVAL { 255 } ::= { agentDiffServAuxMfClfrEntry 6 } agentDiffServAuxMfClfrDstL4PortMin OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. " DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 7 } agentDiffServAuxMfClfrDstL4PortMax OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in agentDiffServAuxMfClfrDstL4PortMin. " DEFVAL { 65535 } ::= { agentDiffServAuxMfClfrEntry 8 } agentDiffServAuxMfClfrSrcL4PortMin OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. " DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 9 } agentDiffServAuxMfClfrSrcL4PortMax OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin. " DEFVAL { 65535 } ::= { agentDiffServAuxMfClfrEntry 10 } agentDiffServAuxMfClfrCos OBJECT-TYPE SYNTAX CosOrAny MAX-ACCESS read-create STATUS current DESCRIPTION "Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a class-match parameter. For frames containing a double VLAN tag, this field is located in the first/outer tag. A value of -1 indicates that a specific COS value has not been defined and thus all COS values are considered a match." DEFVAL { -1 } ::= { agentDiffServAuxMfClfrEntry 11 } agentDiffServAuxMfClfrTos OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "IP TOS bits value, defined as all eight bits of the Service Type octet in the IPv4 header. There are multiple, overlapping, meanings of the TOS octet in use today: Precedence (bits 7-5): IP Precedence, values 0-7 DSCP (bits 7-2): IP DiffServ Code Point, values 0-63 TOS (bits 7-0): IP Type of Service, by bits, values 0-255 Each of these definitions can be produced using the appropriate agentDiffServAuxMfClfrTosMask mask value. These definitions are mutually-exclusive, so only one is allowed for any given classifier element." ::= { agentDiffServAuxMfClfrEntry 12 } agentDiffServAuxMfClfrTosMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "IP TOS bits mask value. It identifies the portion of agentDiffServAuxMfClfrTos that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any TOS value. There are multiple, overlapping meanings of the TOS octet in use today. These are represented by the following specific mask values: Precedence (bits 7-5): 224 (bit mask '11100000') DSCP (bits 7-2): 252 (bit mask '11111100') TOS (bits 7-0): 255 (bit mask '11111111') Other mask values are also permitted." DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 13 } agentDiffServAuxMfClfrDstMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC address. " ::= { agentDiffServAuxMfClfrEntry 14 } agentDiffServAuxMfClfrDstMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any MAC address." DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 15 } agentDiffServAuxMfClfrSrcMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC address. " ::= { agentDiffServAuxMfClfrEntry 16 } agentDiffServAuxMfClfrSrcMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any MAC address." DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 17 } agentDiffServAuxMfClfrVlanId OBJECT-TYPE SYNTAX VlanIdOrAny MAX-ACCESS read-create STATUS obsolete DESCRIPTION "VLAN ID value for the classifier. A value of -1 indicates that a specific VLAN ID value has not been defined and thus all VLAN ID values are considered a match." DEFVAL { -1 } ::= { agentDiffServAuxMfClfrEntry 18 } agentDiffServAuxMfClfrStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. " DEFVAL { nonVolatile } ::= { agentDiffServAuxMfClfrEntry 19 } agentDiffServAuxMfClfrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { agentDiffServAuxMfClfrEntry 20 } agentDiffServAuxMfClfrCos2 OBJECT-TYPE SYNTAX CosOrAny MAX-ACCESS read-create STATUS current DESCRIPTION "Three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame used as a class-match parameter A value of -1 indicates that a specific Secondary COS value has not been defined and thus all Secondary COS values are considered a match." DEFVAL { -1 } ::= { agentDiffServAuxMfClfrEntry 21 } agentDiffServAuxMfClfrEtypeVal1 OBJECT-TYPE SYNTAX EtypeOrAny MAX-ACCESS read-create STATUS current DESCRIPTION "Ethertype value to be compared in order to match this classifier entry. The allowed value for this object is 0x0600 to 0xFFFF, with a value of 0 used to indicate this object is not involved in the classifier entry." DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 22 } agentDiffServAuxMfClfrEtypeVal2 OBJECT-TYPE SYNTAX EtypeOrAny MAX-ACCESS read-create STATUS current DESCRIPTION "A second Ethertype value to be compared in order to match this classifier entry. This value is considered in addition to the value specified by agentDiffServAuxMfClfrEtypeVal1 and serves as a second possible match value (i.e. a packet can match either EtypeVal1 or EtypeVal2). The allowed value for this object is 0x0600 to 0xFFFF, with a value of 0 used to indicate this object is not involved in the classifier entry." DEFVAL { 0 } ::= { agentDiffServAuxMfClfrEntry 23 } agentDiffServAuxMfClfrVlanIdMin OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. For a double VLAN tagged frame, this field is contained in the first/outer tag." DEFVAL { 1 } ::= { agentDiffServAuxMfClfrEntry 24 } agentDiffServAuxMfClfrVlanIdMax OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. For a double VLAN tagged frame, this field is contained in the first/outer tag. This value must be equal to or greater than the value specified for the entry in agentDiffServAuxMfClfrVlanIdMin." DEFVAL { 4094 } ::= { agentDiffServAuxMfClfrEntry 25 } agentDiffServAuxMfClfrVlanId2Min OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame." DEFVAL { 1 } ::= { agentDiffServAuxMfClfrEntry 26 } agentDiffServAuxMfClfrVlanId2Max OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame. This value must be equal to or greater than the value specified for the entry in agentDiffServAuxMfClfrVlanId2Min." DEFVAL { 4094 } ::= { agentDiffServAuxMfClfrEntry 27 } -- -- Actions -- agentDiffServAction OBJECT IDENTIFIER ::= { agentDiffServMIBObjects 2 } -- -- IP Precedence Mark Action Table -- -- Rows of this table are pointed to by diffServActionSpecific to -- provide detailed parameters specific to the IP Precedence Mark action. -- -- A single entry in this table can be shared by multiple -- diffServActionTable entries. -- -- NOTE: This table is referenced instead of the DSCP Mark Action Table -- when marking the IP Precedence of a packet rather than its DSCP. -- agentDiffServIpPrecMarkActTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDiffServIpPrecMarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enumerates specific IP Precedence values used for marking or remarking the Precedence field of IP packets. The entries of this table may be referenced by a diffServActionSpecific attribute." ::= { agentDiffServAction 4 } agentDiffServIpPrecMarkActEntry OBJECT-TYPE SYNTAX AgentDiffServIpPrecMarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IP Precedence mark action table that describes a single IP Precedence value used for marking." INDEX { agentDiffServIpPrecMarkActPrecedence } ::= { agentDiffServIpPrecMarkActTable 1 } AgentDiffServIpPrecMarkActEntry ::= SEQUENCE { agentDiffServIpPrecMarkActPrecedence IpPrecedence } agentDiffServIpPrecMarkActPrecedence OBJECT-TYPE SYNTAX IpPrecedence MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Precedence that this Action will store into the Precedence field of the IP packet. It is quite possible that the only packets subject to this Action are already marked with this IP Precedence. Note also that Differentiated Services processing may result in a packet being marked on both ingress to a network and on egress from it, and that ingress and egress can occur in the same router." ::= { agentDiffServIpPrecMarkActEntry 1 } -- -- COS Mark Action Table -- -- Rows of this table are pointed to by diffServActionSpecific to -- provide detailed parameters specific to the COS Mark action. -- -- A single entry in this table can be shared by multiple -- diffServActionTable entries. -- -- NOTE: This table is referenced when marking the Class of Service -- priority bits as defined in the 802.1Q tag header of a -- tagged Ethernet frame. For frames containing a double VLAN -- tag, this field is located in the first/outer tag. -- agentDiffServCosMarkActTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDiffServCosMarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enumerates specific Class of Service values used for marking or remarking the priority bits in the 802.1p header. The entries of this table may be referenced by a diffServActionSpecific attribute." ::= { agentDiffServAction 2 } agentDiffServCosMarkActEntry OBJECT-TYPE SYNTAX AgentDiffServCosMarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the COS mark action table that describes a single Class of Service value used for marking." INDEX { agentDiffServCosMarkActCos } ::= { agentDiffServCosMarkActTable 1 } AgentDiffServCosMarkActEntry ::= SEQUENCE { agentDiffServCosMarkActCos Cos } agentDiffServCosMarkActCos OBJECT-TYPE SYNTAX Cos MAX-ACCESS read-only STATUS current DESCRIPTION "The Class of Service value that this Action will store into the priority bits of the 802.1p header. It is quite possible that the only packets subject to this Action are already marked with this COS value." ::= { agentDiffServCosMarkActEntry 1 } -- -- Secondary COS (COS2) Mark Action Table -- -- Rows of this table are pointed to by diffServActionSpecific to -- provide detailed parameters specific to the Secondary COS Mark action. -- -- A single entry in this table can be shared by multiple -- diffServActionTable entries. -- -- NOTE: This table is referenced when marking the Secondary Class of Service -- priority bits as defined in the second/inner 802.1Q tag header of a -- double VLAN tagged Ethernet packet. -- agentDiffServCos2MarkActTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDiffServCos2MarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table enumerates specific Secondary Class of Service values used for marking or remarking the priority bits in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet packet. The entries of this table may be referenced by a diffServActionSpecific attribute." ::= { agentDiffServAction 5 } agentDiffServCos2MarkActEntry OBJECT-TYPE SYNTAX AgentDiffServCos2MarkActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Secondary COS mark action table that describes a single Class of Service value used for marking." INDEX { agentDiffServCos2MarkActCos } ::= { agentDiffServCos2MarkActTable 1 } AgentDiffServCos2MarkActEntry ::= SEQUENCE { agentDiffServCos2MarkActCos Cos } agentDiffServCos2MarkActCos OBJECT-TYPE SYNTAX Cos MAX-ACCESS read-only STATUS current DESCRIPTION "The Secondary Class of Service value that this Action will store into the priority bits of the second/inner 802.1p tag header. It is quite possible that the only packets subject to this Action are already marked with this COS value." ::= { agentDiffServCos2MarkActEntry 1 } -- -- Assign Queue Table -- -- Rows of this table are pointed to by diffServActionSpecific to -- provide detailed parameters specific to the Assign Queue action. -- agentDiffServAssignQueueNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for agentDiffServAssignIndex, or a zero to indicate that none exist." ::= { agentDiffServAction 6 } agentDiffServAssignQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDiffServAssignQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used for assigning a stream of Differentiated Services traffic to a specific quality of service (QoS) queue. The traffic stream is identified by the upstream Functional Data Path Element(s), i.e. by the object(s) that point to each entry in this table. This may include all traffic on an interface or just a portion thereof." ::= { agentDiffServAction 7 } agentDiffServAssignQueueEntry OBJECT-TYPE SYNTAX AgentDiffServAssignQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the assign queue table describes a specific (egress) QoS queue identifier for a traffic stream." INDEX { agentDiffServAssignQueueIndex } ::= { agentDiffServAssignQueueTable 1 } AgentDiffServAssignQueueEntry ::= SEQUENCE { agentDiffServAssignQueueIndex IndexInteger, agentDiffServAssignQueueQnum Unsigned32, agentDiffServAssignQueueStorage StorageType, agentDiffServAssignQueueStatus RowStatus } agentDiffServAssignQueueIndex OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Assign Queue entries. Managers obtain new values for row creation in this table by reading agentDiffServAssignQueueNextFree." ::= { agentDiffServAssignQueueEntry 1 } agentDiffServAssignQueueQnum OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The queue identifier value. This value indicates the QoS queue number to which the traffic stream for this data path is directed for egress from the device." ::= { agentDiffServAssignQueueEntry 2 } agentDiffServAssignQueueStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { agentDiffServAssignQueueEntry 3 } agentDiffServAssignQueueStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { agentDiffServAssignQueueEntry 4 } -- -- Redirect Table -- -- Rows of this table are pointed to by diffServActionSpecific to -- provide detailed parameters specific to the Redirect action. -- agentDiffServRedirectNextFree OBJECT-TYPE SYNTAX IndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for agentDiffServRedirectId, or a zero to indicate that none exist." ::= { agentDiffServAction 8 } agentDiffServRedirectTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDiffServRedirectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used for redirecting a stream of Differentiated Services traffic to a specific egress interface, bypassing any normal device forwarding decision. The traffic stream is identified by the upstream Functional Data Path Element(s), i.e. by the object(s) that point to each entry in this table. This may include all traffic on an interface or just a portion thereof." ::= { agentDiffServAction 9 } agentDiffServRedirectEntry OBJECT-TYPE SYNTAX AgentDiffServRedirectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the redirect table describes a specific external interface number used as the egress point of a traffic stream." INDEX { agentDiffServRedirectId } ::= { agentDiffServRedirectTable 1 } AgentDiffServRedirectEntry ::= SEQUENCE { agentDiffServRedirectId IndexInteger, agentDiffServRedirectIntf InterfaceIndex, agentDiffServRedirectStorage StorageType, agentDiffServRedirectStatus RowStatus } agentDiffServRedirectId OBJECT-TYPE SYNTAX IndexInteger MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that enumerates the Redirect entries. Managers obtain new values for row creation in this table by reading agentDiffServRedirectNextFree." ::= { agentDiffServRedirectEntry 1 } agentDiffServRedirectIntf OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The external interface number identifier value. This value indicates the egress interface to which the traffic stream for this data path is directed. Normal traffic forwarding decisions are bypassed." ::= { agentDiffServRedirectEntry 2 } agentDiffServRedirectStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { agentDiffServRedirectEntry 3 } agentDiffServRedirectStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used." ::= { agentDiffServRedirectEntry 4 } -- -- Meter -- agentDiffServMeter OBJECT IDENTIFIER ::= { agentDiffServMIBObjects 3 } -- -- Color Aware Table -- -- Augments the diffServMeterTable to provide additional information regarding -- the policing color mode and its associated color-aware parameters. Each -- row in this table is indexed using a meter Id corresponding to its -- associated Meter Table row plus a local table row index. -- agentDiffServColorAwareTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDiffServColorAwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used for augmenting the Differentiated Services meter information with information describing the packet coloration characteristics for a color-aware mode of policing. The diffServMeterId is used as the index to this table, which logically extends the Meter table row with the columnar objects defined in this Color Aware table row." ::= { agentDiffServMeter 1 } agentDiffServColorAwareEntry OBJECT-TYPE SYNTAX AgentDiffServColorAwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the color aware table describes a single color conformance level of a meter." AUGMENTS { diffServMeterEntry } ::= { agentDiffServColorAwareTable 1 } AgentDiffServColorAwareEntry ::= SEQUENCE { agentDiffServColorAwareLevel INTEGER, agentDiffServColorAwareMode INTEGER, agentDiffServColorAwareValue Unsigned32 } agentDiffServColorAwareLevel OBJECT-TYPE SYNTAX INTEGER { conform(1), exceed(2), unused(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The metering conformance level of this table entry. A policing meter represents either a conforming or an exceeding level of traffic in the traffic stream for this data path. The color characteristics used by the meter are relevant to this conformance level. This object is set to unused(3) when the meter is not being used for policing." DEFVAL { unused } ::= { agentDiffServColorAwareEntry 1 } agentDiffServColorAwareMode OBJECT-TYPE SYNTAX INTEGER { blind(1), awarecos(2), awarecos2(3), awareipdscp(4), awareipprec(5), awareunused(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The color mode indicator for the meter. When set to blind(1), metering is performed in a color-blind manner such that any packet markings are ignored by the meter. The other values listed for this object indicate the packet field used for determining its pre-existing color marking. In color-aware mode, the current color of a packet (e.g. green, yellow, red) influences the metering outcome. The object value awareunused(6) is special in that it denotes that the specific field attributes are not specified for the meter even though a color aware scheme is in use for policing. This object always returns blind(1) when the agentDiffServColorAwareLevel is set to unused(3)." DEFVAL { blind } ::= { agentDiffServColorAwareEntry 2 } agentDiffServColorAwareValue OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the color aware table entry. This value is used to compare the field indicated in agentDiffServColorAwareMode against packets in a traffic stream along the data path supplying the meter for a given conformance level. This object always returns 0 when the agentDiffServColorAwareMode is set to blind(1) or awareunused(6)." DEFVAL { 0 } ::= { agentDiffServColorAwareEntry 3 } -- -- OIDs for diffServTBParamType standard MIB definitions: additional values -- agentDiffServTBMeters OBJECT IDENTIFIER ::= { agentDiffServMIBAdmin 1 } agentDiffServTBParamSimpleTokenBucketAware OBJECT-IDENTITY STATUS current DESCRIPTION "Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3, but using a color-aware mode of operation." ::= { agentDiffServTBMeters 1 } END