IEEE8023-LAG-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------------------- -- IEEE 802.3ad MIB -- ------------------------------------------------------------- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks FROM SNMPv2-SMI DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB PortList FROM Q-BRIDGE-MIB ; lagMIB MODULE-IDENTITY LAST-UPDATED "200006270000Z" ORGANIZATION "IEEE 802.3 Working Group" CONTACT-INFO " stds-802-3-trunking@majordomo.ieee.org" DESCRIPTION "The Link Aggregation module for managing IEEE Std 802.3ad." ::= { iso(1) member-body(2) us(840) ieee802dot3(10006) snmpmibs(300) 43 } lagMIBObjects OBJECT IDENTIFIER ::= { lagMIB 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- LacpKey ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Actor or Partner Key value." SYNTAX INTEGER (0..65535) LacpState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Actor and Partner State values from the LACPDU." SYNTAX BITS { lacpActivity(0), lacpTimeout(1), aggregation(2), synchronization(3), collecting(4), distributing(5), defaulted(6), expired(7) } ChurnState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state of the Churn Detection machine." SYNTAX INTEGER { noChurn(1), churn(2), churnMonitor(3) } -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- groups in the LAG MIB -- ------------------------------------------------------------- dot3adAgg OBJECT IDENTIFIER ::= { lagMIBObjects 1 } dot3adAggPort OBJECT IDENTIFIER ::= { lagMIBObjects 2 } -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- The Tables Last Changed Object -- ------------------------------------------------------------- dot3adTablesLastChanged OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time of the most recent change to the dot3adAggTable, dot3adAggPortListTable, or dot3adAggPortTable." ::= { lagMIBObjects 3 } -- ------------------------------------------------------------- -- The Aggregator Configuration Table -- ------------------------------------------------------------- dot3adAggTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3adAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every Aggregator that is associated with this System." REFERENCE "IEEE 802.3 Subclause 30.7.1" ::= { dot3adAgg 1 } dot3adAggEntry OBJECT-TYPE SYNTAX Dot3adAggEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator." INDEX { dot3adAggIndex } ::= { dot3adAggTable 1 } Dot3adAggEntry ::= SEQUENCE { dot3adAggIndex InterfaceIndex, dot3adAggMACAddress MacAddress, dot3adAggActorSystemPriority INTEGER, dot3adAggActorSystemID MacAddress, dot3adAggAggregateOrIndividual TruthValue, dot3adAggActorAdminKey LacpKey, dot3adAggActorOperKey LacpKey, dot3adAggPartnerSystemID MacAddress, dot3adAggPartnerSystemPriority INTEGER, dot3adAggPartnerOperKey LacpKey, dot3adAggCollectorMaxDelay INTEGER } dot3adAggIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.1" ::= { dot3adAggEntry 1 } dot3adAggMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.9" ::= { dot3adAggEntry 2 } dot3adAggActorSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A 2-octet read-write value indicating the priority value associated with the Actor's System ID." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.5" ::= { dot3adAggEntry 3 } dot3adAggActorSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6)." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.4" ::= { dot3adAggEntry 4 } dot3adAggAggregateOrIndividual OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value indicating whether the Aggregator represents an Aggregate (`TRUE') or an Individual link (`FALSE')." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.6" ::= { dot3adAggEntry 5 } dot3adAggActorAdminKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-write STATUS current DESCRIPTION "The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.7" ::= { dot3adAggEntry 6 } dot3adAggActorOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit read-only value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.8" ::= { dot3adAggEntry 7 } dot3adAggPartnerSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.10" ::= { dot3adAggEntry 8 } dot3adAggPartnerSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.11" ::= { dot3adAggEntry 9 } dot3adAggPartnerOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.12" ::= { dot3adAggEntry 10 } dot3adAggCollectorMaxDelay OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this 16-bit read-write attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser, and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1)." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.32" ::= { dot3adAggEntry 11 } -- ------------------------------------------------------------- -- The Aggregation Port List Table -- ------------------------------------------------------------- dot3adAggPortListTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3adAggPortListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains a list of all the ports associated with each Aggregator." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30" ::= { dot3adAgg 2 } dot3adAggPortListEntry OBJECT-TYPE SYNTAX Dot3adAggPortListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator." INDEX { dot3adAggIndex } ::= { dot3adAggPortListTable 1 } Dot3adAggPortListEntry ::= SEQUENCE { dot3adAggPortListPorts PortList } dot3adAggPortListPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30" ::= { dot3adAggPortListEntry 1 } -- ------------------------------------------------------------- -- The Aggregation Port Table -- ------------------------------------------------------------- dot3adAggPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3adAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port." REFERENCE "IEEE 802.3 Subclause 30.7.2" ::= { dot3adAggPort 1 } dot3adAggPortEntry OBJECT-TYPE SYNTAX Dot3adAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device." INDEX { dot3adAggPortIndex } ::= { dot3adAggPortTable 1 } Dot3adAggPortEntry ::= SEQUENCE { dot3adAggPortIndex InterfaceIndex, dot3adAggPortActorSystemPriority INTEGER, dot3adAggPortActorSystemID MacAddress, dot3adAggPortActorAdminKey LacpKey, dot3adAggPortActorOperKey LacpKey, dot3adAggPortPartnerAdminSystemPriority INTEGER, dot3adAggPortPartnerOperSystemPriority INTEGER, dot3adAggPortPartnerAdminSystemID MacAddress, dot3adAggPortPartnerOperSystemID MacAddress, dot3adAggPortPartnerAdminKey LacpKey, dot3adAggPortPartnerOperKey LacpKey, dot3adAggPortSelectedAggID InterfaceIndex, dot3adAggPortAttachedAggID InterfaceIndex, dot3adAggPortActorPort INTEGER, dot3adAggPortActorPortPriority INTEGER, dot3adAggPortPartnerAdminPort INTEGER, dot3adAggPortPartnerOperPort INTEGER, dot3adAggPortPartnerAdminPortPriority INTEGER, dot3adAggPortPartnerOperPortPriority INTEGER, dot3adAggPortActorAdminState LacpState, dot3adAggPortActorOperState LacpState, dot3adAggPortPartnerAdminState LacpState, dot3adAggPortPartnerOperState LacpState, dot3adAggPortAggregateOrIndividual TruthValue } dot3adAggPortIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the port" REFERENCE "IEEE 802.3 Subclause 30.7.2.1.1" ::= { dot3adAggPortEntry 1 } dot3adAggPortActorSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A 2-octet read-write value used to define the priority value associated with the Actor's System ID." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.2" ::= { dot3adAggPortEntry 2 } dot3adAggPortActorSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.3" ::= { dot3adAggPortEntry 3 } dot3adAggPortActorAdminKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-write STATUS current DESCRIPTION "The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.4" ::= { dot3adAggPortEntry 4 } dot3adAggPortActorOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-write STATUS current DESCRIPTION "The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.5" ::= { dot3adAggPortEntry 5 } dot3adAggPortPartnerAdminSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "A 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.6" ::= { dot3adAggPortEntry 6 } dot3adAggPortPartnerOperSystemPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.7" ::= { dot3adAggPortEntry 7 } dot3adAggPortPartnerAdminSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A 6-octet read-write MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.8" ::= { dot3adAggPortEntry 8 } dot3adAggPortPartnerOperSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.9" ::= { dot3adAggPortEntry 9 } dot3adAggPortPartnerAdminKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-write STATUS current DESCRIPTION "The current administrative value of the Key for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.10" ::= { dot3adAggPortEntry 10 } dot3adAggPortPartnerOperKey OBJECT-TYPE SYNTAX LacpKey MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.11" ::= { dot3adAggPortEntry 11 } dot3adAggPortSelectedAggID OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.12" ::= { dot3adAggPortEntry 12 } dot3adAggPortAttachedAggID OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.13" ::= { dot3adAggPortEntry 13 } dot3adAggPortActorPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.14" ::= { dot3adAggPortEntry 14 } dot3adAggPortActorPortPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority value assigned to this Aggregation Port. This 16-bit value is read-write." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.15" ::= { dot3adAggPortEntry 15 } dot3adAggPortPartnerAdminPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The current administrative value of the port number for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.16" ::= { dot3adAggPortEntry 16 } dot3adAggPortPartnerOperPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.17" ::= { dot3adAggPortEntry 17 } dot3adAggPortPartnerAdminPortPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.18" ::= { dot3adAggPortEntry 18 } dot3adAggPortPartnerOperPortPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.19" ::= { dot3adAggPortEntry 19 } dot3adAggPortActorAdminState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-write STATUS current DESCRIPTION "A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-write." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.20" ::= { dot3adAggPortEntry 20 } dot3adAggPortActorOperState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.21" ::= { dot3adAggPortEntry 21 } dot3adAggPortPartnerAdminState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-write STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-write. The assigned value is used in order to achieve manually configured aggregation." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.22" ::= { dot3adAggPortEntry 22 } dot3adAggPortPartnerOperState OBJECT-TYPE SYNTAX LacpState MAX-ACCESS read-only STATUS current DESCRIPTION "A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.23" ::= { dot3adAggPortEntry 23 } dot3adAggPortAggregateOrIndividual OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate (`TRUE') or is only able to operate as an Individual link (`FALSE')." REFERENCE "IEEE 802.3 Subclause 30.7.2.1.24" ::= { dot3adAggPortEntry 24 } -- ------------------------------------------------------------- -- LACP Statistics Table -- ------------------------------------------------------------- dot3adAggPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3adAggPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port." REFERENCE "IEEE 802.3 Subclause 30.7.3" ::= { dot3adAggPort 2 } dot3adAggPortStatsEntry OBJECT-TYPE SYNTAX Dot3adAggPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Link Aggregation Control Protocol statistics for each port on this device." INDEX { dot3adAggPortIndex } ::= { dot3adAggPortStatsTable 1 } Dot3adAggPortStatsEntry ::= SEQUENCE { dot3adAggPortStatsLACPDUsRx Counter32, dot3adAggPortStatsMarkerPDUsRx Counter32, dot3adAggPortStatsMarkerResponsePDUsRx Counter32, dot3adAggPortStatsUnknownRx Counter32, dot3adAggPortStatsIllegalRx Counter32, dot3adAggPortStatsLACPDUsTx Counter32, dot3adAggPortStatsMarkerPDUsTx Counter32, dot3adAggPortStatsMarkerResponsePDUsTx Counter32 } dot3adAggPortStatsLACPDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid LACPDUs received on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.2" ::= { dot3adAggPortStatsEntry 1 } dot3adAggPortStatsMarkerPDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid Marker PDUs received on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.3" ::= { dot3adAggPortStatsEntry 2 } dot3adAggPortStatsMarkerResponsePDUsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.4" ::= { dot3adAggPortStatsEntry 3 } dot3adAggPortStatsUnknownRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received that either: - carry the Slow Protocols Ethernet Type value (43B.4), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (43B.3), but do not carry the Slow Protocols Ethernet Type. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.5" ::= { dot3adAggPortStatsEntry 4 } dot3adAggPortStatsIllegalRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received that carry the Slow Protocols Ethernet Type value (43B.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (43B.4). This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.6" ::= { dot3adAggPortStatsEntry 5 } dot3adAggPortStatsLACPDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LACPDUs transmitted on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.7" ::= { dot3adAggPortStatsEntry 6 } dot3adAggPortStatsMarkerPDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.8" ::= { dot3adAggPortStatsEntry 7 } dot3adAggPortStatsMarkerResponsePDUsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.3.1.9" ::= { dot3adAggPortStatsEntry 8 } -- ------------------------------------------------------------- -- LACP Debug Table -- ------------------------------------------------------------- dot3adAggPortDebugTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3adAggPortDebugEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port." REFERENCE "IEEE 802.3 Subclause 30.7.4" ::= { dot3adAggPort 3 } dot3adAggPortDebugEntry OBJECT-TYPE SYNTAX Dot3adAggPortDebugEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the debug parameters for a port." INDEX { dot3adAggPortIndex } ::= { dot3adAggPortDebugTable 1 } Dot3adAggPortDebugEntry ::= SEQUENCE { dot3adAggPortDebugRxState INTEGER, dot3adAggPortDebugLastRxTime TimeTicks, dot3adAggPortDebugMuxState INTEGER, dot3adAggPortDebugMuxReason DisplayString, dot3adAggPortDebugActorChurnState ChurnState, dot3adAggPortDebugPartnerChurnState ChurnState, dot3adAggPortDebugActorChurnCount Counter32, dot3adAggPortDebugPartnerChurnCount Counter32, dot3adAggPortDebugActorSyncTransitionCount Counter32, dot3adAggPortDebugPartnerSyncTransitionCount Counter32, dot3adAggPortDebugActorChangeCount Counter32, dot3adAggPortDebugPartnerChangeCount Counter32 } dot3adAggPortDebugRxState OBJECT-TYPE SYNTAX INTEGER { currentRx(1), expired(2), defaulted(3), initialize(4), lacpDisabled(5), portDisabled(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute holds the value `currentRx' if the Receive state machine for the Aggregation Port is in the CURRENT state, `expired' if the Receive state machine is in the EXPIRED state, `defaulted' if the Receive state machine is in the DEFAULTED state, `initialize' if the Receive state machine is in the INITIALIZE state, `lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or `portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.2" ::= { dot3adAggPortDebugEntry 1 } dot3adAggPortDebugLastRxTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.3" ::= { dot3adAggPortDebugEntry 2 } dot3adAggPortDebugMuxState OBJECT-TYPE SYNTAX INTEGER { detached(1), waiting(2), attached(3), collecting(4), distributing(5), collectingDistributing(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.4" ::= { dot3adAggPortDebugEntry 3 } dot3adAggPortDebugMuxReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.5" ::= { dot3adAggPortDebugEntry 4 } dot3adAggPortDebugActorChurnState OBJECT-TYPE SYNTAX ChurnState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Actor Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and `churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.6" ::= { dot3adAggPortDebugEntry 5 } dot3adAggPortDebugPartnerChurnState OBJECT-TYPE SYNTAX ChurnState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Partner Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and `churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.7" ::= { dot3adAggPortDebugEntry 6 } dot3adAggPortDebugActorChurnCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.8" ::= { dot3adAggPortDebugEntry 7 } dot3adAggPortDebugPartnerChurnCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.9" ::= { dot3adAggPortDebugEntry 8 } dot3adAggPortDebugActorSyncTransitionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Actor's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.10" ::= { dot3adAggPortDebugEntry 9 } dot3adAggPortDebugPartnerSyncTransitionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Partner's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.11" ::= { dot3adAggPortDebugEntry 10 } dot3adAggPortDebugActorChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.12" ::= { dot3adAggPortDebugEntry 11 } dot3adAggPortDebugPartnerChangeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of times the Partner's perception of the LAG ID (see 43.3.6.1) for this Aggregation Port has changed. This value is read-only." REFERENCE "IEEE 802.3 Subclause 30.7.4.1.13" ::= { dot3adAggPortDebugEntry 12 } -- ------------------------------------------------------------- -- IEEE 802.3ad MIB - Conformance Information -- ------------------------------------------------------------- dot3adAggConformance OBJECT IDENTIFIER ::= { lagMIB 2 } dot3adAggGroups OBJECT IDENTIFIER ::= { dot3adAggConformance 1 } dot3adAggCompliances OBJECT IDENTIFIER ::= { dot3adAggConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- dot3adAggGroup OBJECT-GROUP OBJECTS { dot3adAggActorSystemID, dot3adAggActorSystemPriority, dot3adAggAggregateOrIndividual, dot3adAggActorAdminKey, dot3adAggMACAddress, dot3adAggActorOperKey, dot3adAggPartnerSystemID, dot3adAggPartnerSystemPriority, dot3adAggPartnerOperKey, dot3adAggCollectorMaxDelay } STATUS current DESCRIPTION "A collection of objects providing information about an aggregation." ::= { dot3adAggGroups 1 } dot3adAggPortListGroup OBJECT-GROUP OBJECTS { dot3adAggPortListPorts } STATUS current DESCRIPTION "A collection of objects providing information about every port in an aggregation." ::= { dot3adAggGroups 2 } dot3adAggPortGroup OBJECT-GROUP OBJECTS { dot3adAggPortActorSystemPriority, dot3adAggPortActorSystemID, dot3adAggPortActorAdminKey, dot3adAggPortActorOperKey, dot3adAggPortPartnerAdminSystemPriority, dot3adAggPortPartnerOperSystemPriority, dot3adAggPortPartnerAdminSystemID, dot3adAggPortPartnerOperSystemID, dot3adAggPortPartnerAdminKey, dot3adAggPortPartnerOperKey, dot3adAggPortSelectedAggID, dot3adAggPortAttachedAggID, dot3adAggPortActorPort, dot3adAggPortActorPortPriority, dot3adAggPortPartnerAdminPort, dot3adAggPortPartnerOperPort, dot3adAggPortPartnerAdminPortPriority, dot3adAggPortPartnerOperPortPriority, dot3adAggPortActorAdminState, dot3adAggPortActorOperState, dot3adAggPortPartnerAdminState, dot3adAggPortPartnerOperState, dot3adAggPortAggregateOrIndividual } STATUS current DESCRIPTION "A collection of objects providing information about every port in an aggregation." ::= { dot3adAggGroups 3 } dot3adAggPortStatsGroup OBJECT-GROUP OBJECTS { dot3adAggPortStatsLACPDUsRx, dot3adAggPortStatsMarkerPDUsRx, dot3adAggPortStatsMarkerResponsePDUsRx, dot3adAggPortStatsUnknownRx, dot3adAggPortStatsIllegalRx, dot3adAggPortStatsLACPDUsTx, dot3adAggPortStatsMarkerPDUsTx, dot3adAggPortStatsMarkerResponsePDUsTx } STATUS current DESCRIPTION "A collection of objects providing information about every port in an aggregation." ::= { dot3adAggGroups 4 } dot3adAggPortDebugGroup OBJECT-GROUP OBJECTS { dot3adAggPortDebugRxState, dot3adAggPortDebugLastRxTime, dot3adAggPortDebugMuxState, dot3adAggPortDebugMuxReason, dot3adAggPortDebugActorChurnState, dot3adAggPortDebugPartnerChurnState, dot3adAggPortDebugActorChurnCount, dot3adAggPortDebugPartnerChurnCount, dot3adAggPortDebugActorSyncTransitionCount, dot3adAggPortDebugPartnerSyncTransitionCount, dot3adAggPortDebugActorChangeCount, dot3adAggPortDebugPartnerChangeCount } STATUS current DESCRIPTION "A collection of objects providing debug information about every aggregated port." ::= { dot3adAggGroups 5 } dot3adTablesLastChangedGroup OBJECT-GROUP OBJECTS { dot3adTablesLastChanged } STATUS current DESCRIPTION "A collection of objects providing information about the time of changes to the configuration of aggregations and their ports." ::= { dot3adAggGroup 6 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- dot3adAggCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for device support of Link Aggregation." MODULE MANDATORY-GROUPS { dot3adAggGroup, dot3adAggPortGroup, dot3adTablesLastChangedGroup } GROUP dot3adAggPortListGroup DESCRIPTION "This group is optional." GROUP dot3adAggPortStatsGroup DESCRIPTION "This group is optional." GROUP dot3adAggPortDebugGroup DESCRIPTION "This group is optional." ::= { dot3adAggCompliances 1 } END