-- =================================================================
-- Copyright (C) 2002 by  HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description:the huawei load-backup mib
-- Reference:
-- Version: V1.0
-- History:
--	
-- =================================================================

	HUAWEI-LOAD-BACKUP-MIB DEFINITIONS ::= BEGIN

		IMPORTS 
			hwFrameIndex, hwSlotIndex			
				FROM HUAWEI-DEVICE-MIB			
			huaweiUtility			
				FROM HUAWEI-MIB			
			HWPCBType			
				FROM HUAWEI-TC-MIB			
			IpAddress, Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE			
				FROM SNMPv2-SMI			
			DisplayString			
				FROM SNMPv2-TC;
	
	
		
		hwLoadBackup MODULE-IDENTITY 
			LAST-UPDATED "200210010900Z"		
			ORGANIZATION
				"HAUWEI MIB Standard community"
			CONTACT-INFO
				"
				ADDR£ºHUAWEI TECHNOLOGY CO.,LTD,SHEZHEN CHINA
				Tel£º 86-755-26540808			
				"
			DESCRIPTION 
				"V01_05"
			REVISION "200204220900Z"		 
			DESCRIPTION
				" V01_01   20020422"
				
			REVISION "200206060900Z"		 
			DESCRIPTION
				"V01_02
				20020606"
			REVISION "200208200900Z"		 
			DESCRIPTION
				" V01_03   2002/08/28 			
				"
			REVISION "200209060900Z"		 
			DESCRIPTION
				" V01_04   2002/09/06"			                    
			REVISION "200209100900Z"		 
			DESCRIPTION
				" V01_05   2002/09/10 
				1) hwLoadParaTable.hwLoadContent
				2) hwBackupParaTable.hwBackupContent"
			::= { huaweiUtility 6 }
		

		hwLoadBackupMon OBJECT IDENTIFIER ::= { hwLoadBackup 1 }
		
		hwLoadParaTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwLoadParaTableEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Load para table "
			::= { hwLoadBackupMon 1 }
		
		hwLoadParaTableEntry OBJECT-TYPE
			SYNTAX HwLoadParaTableEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Load para table entry"
			INDEX { hwFrameIndex, hwSlotIndex }
			::= { hwLoadParaTable 1 }
		
		HwLoadParaTableEntry ::=
			SEQUENCE { 
				hwLoadServerIpAddr
					IpAddress,
				hwLoadMode
					INTEGER,
				hwLoadFileName
					DisplayString,
				hwLoadContent
					INTEGER,
				hwLoadBoardType
					HWPCBType,
				hwPortId
					Integer32,
				hwLoadProcess
					Integer32,				
				hwLoadUserName
				    DisplayString,
				hwLoadPassword
				    DisplayString    	

			 }

		hwLoadServerIpAddr OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the IP address of Server"
			::= { hwLoadParaTableEntry 1 }
		
		hwLoadMode OBJECT-TYPE
			SYNTAX INTEGER
				{
				tftp(1),
				modem(2),
				ftp(3),
				smbLoadAnyBoards(4),
				other(255)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Load protocol "
			::= { hwLoadParaTableEntry 2 }
		
		hwLoadFileName OBJECT-TYPE
			SYNTAX DisplayString (SIZE (1..127))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the file name "
			::= { hwLoadParaTableEntry 3 }
		
		hwLoadContent OBJECT-TYPE
			SYNTAX INTEGER
				{
				program(1),
				configuration(2),
				patch(3),
				shellMacro(4),
				resLocal(5),
				resGeneral(6),
				cpeDrive(7),
				programDatabase(8),
				programBios(9),
				programApp(10),
				logicFpga(11),
				logicCpld(12),
				logicPci(13),
				logicAfc(14),
				programMicroCode(15),
				programFireware(16), 
				programHelp(17),
				programDataFlow(18),
				programBootFile(19),
				logciPa(20),
				webExp(21),
				webNev(22),
				webHelp(23),
				configurationIni(40),
				configurationEfs(41),
				configurationCli(42),
				programCurrent(45),
				programOther(46)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"load content " 
			::= { hwLoadParaTableEntry 4 }
		
		hwLoadBoardType OBJECT-TYPE
			SYNTAX HWPCBType
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the board type the system supports "
			::= { hwLoadParaTableEntry 5 }
		
		hwPortId OBJECT-TYPE
			SYNTAX Integer32
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the port index"
			::= { hwLoadParaTableEntry 6 }         
			
		hwLoadProcess OBJECT-TYPE
			SYNTAX Integer32(0..100)
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				" the Process of loading."
			::= { hwLoadParaTableEntry 7 }
			
		hwLoadUserName OBJECT-TYPE
			SYNTAX DisplayString (SIZE (1..31))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the load user name£¬which is necessary in FTP mode 
				and unnecessary in TFTP mode "
			::= { hwLoadParaTableEntry 8 }
			
		hwLoadPassword OBJECT-TYPE
			SYNTAX DisplayString (SIZE (1..16))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the load user name,which is necessary in FTP mode ,
				which is necessary in FTP mode 
				and unnecessary in TFTP mode "
			::= { hwLoadParaTableEntry 9 }
			
		
		hwBackupParaTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwBackupParaTableEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"backup para table"
			::= { hwLoadBackupMon 2 }
		
		hwBackupParaTableEntry OBJECT-TYPE
			SYNTAX HwBackupParaTableEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"backup para table entry"
			INDEX { hwFrameIndex, hwSlotIndex }
			::= { hwBackupParaTable 1 }
		
		HwBackupParaTableEntry ::=
			SEQUENCE { 
				hwBackupServerIpAddr
					IpAddress,
				hwBackupMode
					INTEGER,
				hwBackupFileName
					DisplayString,
				hwBackupContent
					INTEGER,
				hwBackupProcess					
					Integer32,
				hwBackupUserName
				    DisplayString,
				hwBackupPassword
				    DisplayString     
			 }

		hwBackupServerIpAddr OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the IP address of Server"
			::= { hwBackupParaTableEntry 1 }
		
		hwBackupMode OBJECT-TYPE
			SYNTAX INTEGER
				{
				tftp(1),
				modem(2),
				ftp(3),
				other(4)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Load protocol:tftp and MODEM currently supported"
			::= { hwBackupParaTableEntry 2 }
		
		hwBackupFileName OBJECT-TYPE
			SYNTAX DisplayString (SIZE (1..127))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the file name "
			::= { hwBackupParaTableEntry 3 }
		
		hwBackupContent OBJECT-TYPE
			SYNTAX INTEGER
				{
				configuration(1),
				shellMacro(2),   
				log(3),          
				bill(4),         
				alarm(5),        
				program(15),     
				reslocal(16),    
				resgeneral(17),   
				patch(18),            
				programDatabase(19),  
				programBios(20),      
				programApp(21),      
				logicFpga(22),
				logicCpld(23),
				logicPci(24),
				logicAfc(25),
				programMicroCode(26),
				programFireware(27), 
				programDataFlow(28),
				programBootFile(29),
				logciPa(30),
				webExp(31),
				webNev(32),
				webHelp(33),
				configurationIni(40),
				configurationEfs(41),
				configurationCli(42),
				programCurrent(45),
				programOther(46)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"backup content"
			::= { hwBackupParaTableEntry 4 }
	
		hwBackupProcess OBJECT-TYPE
			SYNTAX Integer32(0..100)
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				" the Process of backuping."
			::= { hwBackupParaTableEntry 5 } 
		
		hwBackupUserName OBJECT-TYPE
			SYNTAX DisplayString (SIZE (1..31))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the backup user name£¬which is necessary in FTP mode 
				and unnecessary in TFTP mode "
			::= { hwBackupParaTableEntry 6 }
			
		hwBackupPassword OBJECT-TYPE
			SYNTAX DisplayString (SIZE (1..16))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"the backup user name,which is necessary in FTP mode ,
				which is necessary in FTP mode 
				and unnecessary in TFTP mode "
			::= { hwBackupParaTableEntry 7 }
             
             
		hwBackupAndRestoreConfig  OBJECT IDENTIFIER ::= { hwLoadBackupMon 4 }
		hwBackupAndRestore OBJECT-TYPE
			SYNTAX INTEGER
				{
				copyMemToFlash(1),
				copyFlashToMem(2),
				copyMemToHardDisk(3),
				copyHardDiskToMem(4)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				""
			::= { hwBackupAndRestoreConfig 1 }

	
		
		snmpTraps OBJECT IDENTIFIER ::= { hwLoadBackupMon 3 }
		snmpTrapsOID OBJECT IDENTIFIER ::= { snmpTraps 0 }
		backupFailAlarm NOTIFICATION-TYPE
			OBJECTS { hwFrameIndex, hwSlotIndex,hwTrapBackupResult }
			STATUS current
			DESCRIPTION
				"
				1 name:backupFailAlarm
				2 reason£ºwhen backuping file by ftp or tftp,there is an error.The reasean maybe filename error ,non-exist directory,the server ip address error or loading type error
				3 restore advice£ºretry to set the params again£¬or modify according the above reason.
				"
			::= { snmpTrapsOID 1 }
		
		
		loadFailAlarm NOTIFICATION-TYPE
			OBJECTS { hwFrameIndex, hwSlotIndex,hwTrapLoadResult }
			STATUS current
			DESCRIPTION
				"1 name:loadFailAlarm
				 2 reason£ºwhen loading file by ftp or tftp,there is an error.The reasean maybe filename error ,non-exist directory,the server ip address error or loading type error
				 3 restore advice£ºretry to set the params again£¬or modify according the above reason.
				"
			::= { snmpTrapsOID 2 }
		
		backupFailAlarmSuccess  NOTIFICATION-TYPE
			OBJECTS {hwFrameIndex, hwSlotIndex }
			STATUS current
			DESCRIPTION
				"
				 1 name:backupFailAlarmSuccess
				 2 reason£ºto notify snmp workstation the backup operation success.
				 3 restore advice: none				
				"
			::= { snmpTrapsOID 3 }	

		loadFailAlarmSuccess  NOTIFICATION-TYPE
			OBJECTS {hwFrameIndex,  hwSlotIndex }
			STATUS current
			DESCRIPTION
				"
				 1 name:loadFailAlarmSuccess
				 2 reason:to notify snmp workstation the load operation success.
				 3 restore advice: none
				"
			::= { snmpTrapsOID 4 }
	
		copyAndSaveFail  NOTIFICATION-TYPE
			OBJECTS { hwCopyAndSaveResult }
			STATUS current
			DESCRIPTION
				"
				 1 name:copyAndSaveFail
				 2 reason£ºfile CRC error,writing FLASH error,time out,reading flash error,etc.
				 3 restore advice:retry to set the params again£¬or modify according the above reason.
				"
			::= { snmpTrapsOID 5 }		
			
		copyAndSaveSuccess  NOTIFICATION-TYPE
			STATUS current
			DESCRIPTION
				"
				 1 name:copyAndSaveSuccess
				 2 reason:to notify snmp workstation the copy and save operation success.
				 3 restore advice: none
				"
			::= { snmpTrapsOID 6 }			
			
		
		hwTrapReasonOids  OBJECT IDENTIFIER ::= { snmpTraps 1 }	
		hwTrapLoadBackupResult  OBJECT IDENTIFIER ::= { hwTrapReasonOids  1 }	
		          
		          
		hwTrapLoadResult OBJECT-TYPE
			SYNTAX Integer32
			MAX-ACCESS accessible-for-notify
			STATUS current
			DESCRIPTION
				"load failure reason"
			::= { hwTrapLoadBackupResult  1 }
			
		hwTrapBackupResult OBJECT-TYPE
			SYNTAX Integer32
			MAX-ACCESS accessible-for-notify
			STATUS current
			DESCRIPTION
				"backup failure reason"
			::= { hwTrapLoadBackupResult  2 }

		hwCopyAndSaveResult OBJECT-TYPE
			SYNTAX Integer32
			MAX-ACCESS accessible-for-notify
			STATUS current
			DESCRIPTION
				"copy and slave failure reason"
			::= { hwTrapLoadBackupResult  3 }			
	
	END