-- ***************************************************************** -- DOCS-SUBMGT3-MIB.my: -- -- May 2008 Baoli Chen -- -- Initial Version: May 2008: Annex Q.2 from CM-SP-OSSIv3.0-I07-080522 -- -- Copyright (c) 2008 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** DOCS-SUBMGT3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64 FROM SNMPv2-SMI -- RFC 2578 RowStatus, TruthValue, TimeStamp, MacAddress FROM SNMPv2-TC -- RFC 2579 OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- RFC 2580 InetAddressType, InetAddress, InetAddressPrefixLength, InetPortNumber FROM INET-ADDRESS-MIB -- RFC 4001 docsIf3CmtsCmRegStatusEntry, docsIf3CmtsCmRegStatusId FROM DOCS-IF3-MIB SnmpTagList FROM SNMP-TARGET-MIB -- RFC 3411 DocsL2vpnIfList FROM DOCS-L2VPN-MIB clabProjDocsis FROM CLAB-DEF-MIB; docsSubmgt3Mib MODULE-IDENTITY LAST-UPDATED "200705180000Z" -- May 18, 2007 ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO " Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: mibs@cablelabs.com" DESCRIPTION "This MIB module contains the management objects for the CMTS control of the IP4 and IPv6 traffic with origin and destination to CMs and/or CPEs behind the CM." REVISION "200705180000Z" -- May 18, 2007 DESCRIPTION "Revised Version includes ECNs OSSIv3.0-N-07.0445-3 OSSIv3.0-N-07.0444-3 OSSIv3.0-N-07.0441-4 and published as I03" REVISION "200612071700Z" -- Dec 7, 2006 DESCRIPTION "Initial version, published as part of the CableLabs OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207 Copyright 1999-2006 Cable Television Laboratories, Inc. All rights reserved." ::= { clabProjDocsis 10 } -- Textual Conventions -- Object Definitions docsSubmgt3MibObjects OBJECT IDENTIFIER ::= { docsSubmgt3Mib 1 } docsSubmgt3Base OBJECT IDENTIFIER ::= { docsSubmgt3MibObjects 1 } docsSubmgt3BaseCpeMaxIpv4Def OBJECT-TYPE SYNTAX Unsigned32 (0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the maximum number of IPv4 Addresses allowed for the CM's CPEs if not signaled in the registration process." DEFVAL { 16 } ::= { docsSubmgt3Base 1 } docsSubmgt3BaseCpeMaxIpv6PrefixDef OBJECT-TYPE SYNTAX Unsigned32 (0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the maximum number of IPv6 prefixes allowed for the CM's CPEs if not signaled in the registration process." DEFVAL { 16 } ::= { docsSubmgt3Base 2 } docsSubmgt3BaseCpeActiveDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for enabling Subscriber Management filters and controls in the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { false } ::= { docsSubmgt3Base 3 } docsSubmgt3BaseCpeLearnableDef OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for enabling the CPE learning process for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { true } ::= { docsSubmgt3Base 4 } docsSubmgt3BaseSubFilterDownDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the subscriber (CPE) downstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 5 } docsSubmgt3BaseSubFilterUpDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the subscriber (CPE) upstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 6 } docsSubmgt3BaseCmFilterDownDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the CM stack downstream filter group applying to the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 7 } docsSubmgt3BaseCmFilterUpDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the CM stack upstream filter group applying to the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 8 } docsSubmgt3BasePsFilterDownDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the PS or eRouter downstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 9 } docsSubmgt3BasePsFilterUpDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the PS or eRouter upstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 10 } docsSubmgt3BaseMtaFilterDownDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the MTA downstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 11 } docsSubmgt3BaseMtaFilterUpDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the MTA upstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 12 } docsSubmgt3BaseStbFilterDownDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the STB downstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 13 } docsSubmgt3BaseStbFilterUpDef OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the default value for the STB upstream filter group for the CM if the parameter is not signaled in the DOCSIS Registration process." DEFVAL { 0 } ::= { docsSubmgt3Base 14 } docsSubmgt3CpeCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsSubmgt3CpeCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object maintains per-CM traffic policies enforced by the CMTS. The CMTS acquires the CM traffic policies through the CM registration process, or in the absence of some or all of those parameters, from the Base object. The CM information and controls are meaningful and used by the CMTS, but only after the CM is operational." ::= { docsSubmgt3MibObjects 2} docsSubmgt3CpeCtrlEntry OBJECT-TYPE SYNTAX DocsSubmgt3CpeCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsSubmgt3CpeCtrlTable. The CMTS does not persist the instances of the CpeCtrl object across reinitializations." AUGMENTS { docsIf3CmtsCmRegStatusEntry } ::= { docsSubmgt3CpeCtrlTable 1 } DocsSubmgt3CpeCtrlEntry ::= SEQUENCE { docsSubmgt3CpeCtrlMaxCpeIpv4 Unsigned32, docsSubmgt3CpeCtrlMaxCpeIpv6Prefix Unsigned32, docsSubmgt3CpeCtrlActive TruthValue, docsSubmgt3CpeCtrlLearnable TruthValue, docsSubmgt3CpeCtrlReset TruthValue, docsSubmgt3CpeCtrlLastReset TimeStamp } docsSubmgt3CpeCtrlMaxCpeIpv4 OBJECT-TYPE SYNTAX Unsigned32 (0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the number of simultaneous IP v4 addresses permitted for CPE connected to the CM. When the MaxCpeIpv4 attribute is set to zero (0), all Ipv4 CPE traffic from the CM is dropped. The CMTS configures this attribute with whichever of the 'Subscriber Management CPE IPv4 List' or 'Subscriber Management Control-Max_CpeIPv4' signaled encodings is greater, or in the absence of all of those provisioning parameters, with the CpeMaxIp v4Def from the Base object. This limit applies to learned and DOCSIS-provisioned entries but not to entries added through some administrative process at the CMTS. Note that this attribute is only meaningful when the Active attribute of the CM is set to 'true'." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management TLVs section in the Common Radio Frequency Interface Encodings Annex." ::= { docsSubmgt3CpeCtrlEntry 1 } docsSubmgt3CpeCtrlMaxCpeIpv6Prefix OBJECT-TYPE SYNTAX Unsigned32 (0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the number of simultaneous IPv6 prefixes permitted for CPE connected to the CM. When the MaxCpeIpv6Prefix is set to zero (0), all IPv6 CPE traffic from the CM is dropped. The CMTS configures this attribute with whichever of the 'Subscriber Management CPE IPv6 List' or'Subscriber Management Control Max Cpe IPv6 Prefix' signaled encodings is greater, or in the absence of all of those provisioning parameters, with the CpeMaxIpv6PrefixDef from the Base object. This limit applies to learned and DOCSIS-provisioned entries but not to entries added through some administrative process at the CMTS. Note that this attribute is only meaningful when the Active attribute of the CM is set to 'true'." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management TLVs section in the Common Radio Frequency Interface Encodings Annex." ::= { docsSubmgt3CpeCtrlEntry 2 } docsSubmgt3CpeCtrlActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the application of subscriber management to this CM. If this is set to 'true', CMTS-based CPE control is active, and all the actions required by the various filter policies and controls apply at the CMTS. If this is set to false, no subscriber management filtering is done at the CMTS (but other filters may apply). If not set through DOCSIS provisioning, this object defaults to the value of the Active attribute of the Base object." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management Control section in the Common Radio Frequency Interface Encodings Annex." ::= { docsSubmgt3CpeCtrlEntry 3 } docsSubmgt3CpeCtrlLearnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls whether the CMTS may learn (and pass traffic for) CPE IP addresses associated with a CM. If this is set to 'true', the CMTS may learn up to the CM MaxCpeIp value less any DOCSIS-provisioned entries related to this CM. The nature of the learning mechanism is not specified here. If not set through DOCSIS provisioning, this object defaults to the value of the CpeLearnableDef attribute from the Base object. Note that this attribute is only meaningful if docsSubMgtCpeControlActive is 'true' to enforce a limit in the number of CPEs learned. CPE learning is always performed for the CMTS for security reasons." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management Control section in the Common Radio Frequency Interface Encodings Annex." ::= { docsSubmgt3CpeCtrlEntry 4 } docsSubmgt3CpeCtrlReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to 'true', this attribute commands the CMTS to delete the instances denoted as 'learned' addresses in the CpeIp object. This attribute always returns false on read." ::= { docsSubmgt3CpeCtrlEntry 5 } docsSubmgt3CpeCtrlLastReset OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the system Up Time of the last set to 'true' of the Reset attribute of this instance. Zero if never reset." ::= { docsSubmgt3CpeCtrlEntry 6 } docsSubmgt3CpeIpTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsSubmgt3CpeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines the list of IP Addresses behind the CM known by the CMTS. If the Active attribute of the CpeCtrl object associated with a CM is set to 'true' and the CMTS receives an IP packet from a CM that contains a source IP address that does not match one of the CPE IP addresses associated with this CM, one of two things occurs. If the number of CPE IPs is less than the MaxCpeIp of the CpeCtrl object for that CM, the source IP address is added to this object and the packet is forwarded; otherwise, the packet is dropped." ::= { docsSubmgt3MibObjects 3} docsSubmgt3CpeIpEntry OBJECT-TYPE SYNTAX DocsSubmgt3CpeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsSubmgt3CpeIpTable." INDEX { docsIf3CmtsCmRegStatusId, docsSubmgt3CpeIpId } ::= { docsSubmgt3CpeIpTable 1 } DocsSubmgt3CpeIpEntry ::= SEQUENCE { docsSubmgt3CpeIpId Unsigned32, docsSubmgt3CpeIpAddrType InetAddressType, docsSubmgt3CpeIpAddr InetAddress, docsSubmgt3CpeIpAddrPrefixLen InetAddressPrefixLength, docsSubmgt3CpeIpLearned TruthValue, docsSubmgt3CpeIpType INTEGER } docsSubmgt3CpeIpId OBJECT-TYPE SYNTAX Unsigned32 (1..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute represents a unique identifier for a CPE IP of the CM. An instance of this attribute exists for each CPE provisioned in the 'Subscriber Management CPE IPv4 Table' or 'Subscriber Management CPE IPv6 Table' encodings. An entry is created either through the included CPE IP addresses in the provisioning object, or CPEs learned from traffic sourced from the CM." ::= { docsSubmgt3CpeIpEntry 1 } docsSubmgt3CpeIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Internet address of the Addr attribute." ::= { docsSubmgt3CpeIpEntry 2 } docsSubmgt3CpeIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the IP address either set from provisioning or learned via address gleaning or other forwarding means." ::= { docsSubmgt3CpeIpEntry 3 } docsSubmgt3CpeIpAddrPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the prefix length associated with the IP subnet prefix either set from provisioning or learned via address gleaning or other forwarding means. For IPv4 CPE addresses this attribute generally reports the value 32 (32 bits) to indicate a unicast IPv4 address. For IPv6, this attribute represents either an IPv6 unicast address (128 bits, equal to /128 prefix length) or a subnet prefix length (for example 56 bits, equal to /56 prefix length)." ::= { docsSubmgt3CpeIpEntry 4 } docsSubmgt3CpeIpLearned OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is set to 'true' when the IP address was learned from IP packets sent upstream rather than via the CM provisioning process." ::= { docsSubmgt3CpeIpEntry 5 } docsSubmgt3CpeIpType OBJECT-TYPE SYNTAX INTEGER { cpe(1), ps(2), mta(3), stb(4), tea(5), erouter(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the type of CPE based on the following classification below: 'cpe' Regular CPE clients. 'ps' CableHome Portal Server (PS) 'mta' PacketCable Multimedia Terminal Adapter (MTA) 'stb' Digital Set-top Box (STB). 'tea' T1 Emulation adapter (TEA) 'erouter' Embedded Router (eRouter)" ::= { docsSubmgt3CpeIpEntry 6 } docsSubmgt3GrpTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsSubmgt3GrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object defines the set of downstream and upstream filter groups that the CMTS applies to traffic associated with that CM." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804, Subscriber Management TLVs section in the Common Radio Frequency Interface Encodings Annex." ::= { docsSubmgt3MibObjects 4} docsSubmgt3GrpEntry OBJECT-TYPE SYNTAX DocsSubmgt3GrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsSubmgt3GrpTable. The CMTS does not persist the instances of the Grp object across reinitializations." AUGMENTS { docsIf3CmtsCmRegStatusEntry } ::= { docsSubmgt3GrpTable 1 } DocsSubmgt3GrpEntry ::= SEQUENCE { docsSubMgt3GrpUdcGroupIds SnmpTagList, docsSubMgt3GrpUdcSentInRegRsp TruthValue, docsSubmgt3GrpSubFilterDs Unsigned32, docsSubmgt3GrpSubFilterUs Unsigned32, docsSubmgt3GrpCmFilterDs Unsigned32, docsSubmgt3GrpCmFilterUs Unsigned32, docsSubmgt3GrpPsFilterDs Unsigned32, docsSubmgt3GrpPsFilterUs Unsigned32, docsSubmgt3GrpMtaFilterDs Unsigned32, docsSubmgt3GrpMtaFilterUs Unsigned32, docsSubmgt3GrpStbFilterDs Unsigned32, docsSubmgt3GrpStbFilterUs Unsigned32 } docsSubMgt3GrpUdcGroupIds OBJECT-TYPE SYNTAX SnmpTagList MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group(s) associated with the CM signaled 'Upstream Drop Classifier Group ID' encodings during the registration process. UDC Group IDs are integer values and this attribute reports them as decimal numbers that are space-separated. The zero-length string indicates that the CM didn't signal UDC Group IDs. This attribute provides two functions: - Communicate the CM the configured UDC Group ID(s), irrespective of the CM being provisioned to filter upstream traffic based on IP Filters or UDCs. - Optionally, and with regards to the CMTS, if the value of the attribute UdcSentInReqRsp is 'true', indicates that the filtering rules associated with the Subscriber Management Group ID(s) will be sent during registration to the CM. It is vendor specific whether the CMTS updates individual CM UDCs after registration when rules are changed in the Grp object." DEFVAL { ''H } ::= { docsSubmgt3GrpEntry 1 } docsSubMgt3GrpUdcSentInRegRsp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the CMTS upstream filtering status for this CM. The value 'true' indicates that the CMTS has sent UDCs to the CM during registration process. In order for a CMTS to send UDCs to a CM, the CMTS MAC Domain needed to be enabled via the MAC Domain attribute SendUdcRulesEnabled and the CM had indicated the UDC capability support during the registration process. The value 'false' indicates that the CMTS was not enabled to sent UDCs to the CMs in the MAC Domain, or the CM does not advertised UDC support in its capabilities encodings, or both. Since the CMTS capability to sent UDCs to CMs during the registration process is optional, the CMTS is not required to implement the value 'true'." DEFVAL { false } ::= { docsSubmgt3GrpEntry 2 } docsSubmgt3GrpSubFilterDs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic destined for subscriber's CPE attached to the referenced CM (attached to CM CPE interfaces). This value corresponds to the 'Subscriber Downstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterDownDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic destined to hosts attached to this CM." ::= { docsSubmgt3GrpEntry 3 } docsSubmgt3GrpSubFilterUs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic originating from subscriber's CPE attached to the referenced CM (attached to CM CPE interfaces). This value corresponds to the 'Subscriber Upstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterUpDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic originating from hosts attached to this CM." ::= { docsSubmgt3GrpEntry 4 } docsSubmgt3GrpCmFilterDs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic destined for the CM itself. This value corresponds to the 'CM Downstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the CmFilterDownDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic destined to the CM." ::= { docsSubmgt3GrpEntry 5 } docsSubmgt3GrpCmFilterUs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic originating from the CM itself. This value corresponds to the 'Subscriber Upstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterUpDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic originating from this CM." ::= { docsSubmgt3GrpEntry 6 } docsSubmgt3GrpPsFilterDs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic destined to the Embedded CableHome Portal Services Element or the Embedded Router on the referenced CM. This value corresponds to the 'PS Downstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterDownDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic destined to the Embedded CableHome Portal Services Element or Embedded Router on this CM." ::= { docsSubmgt3GrpEntry 7 } docsSubmgt3GrpPsFilterUs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic originating from the Embedded CableHome Portal Services Element or Embedded Router on the referenced CM. This value corresponds to the 'PS Upstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterUpDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic originating from the Embedded CableHome Portal Services Element or Embedded Router on this CM." ::= { docsSubmgt3GrpEntry 8 } docsSubmgt3GrpMtaFilterDs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic destined to the Embedded Multimedia Terminal Adapter on the referenced CM. This value corresponds to the 'MTA Downstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterDownDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic destined to the Embedded Multimedia Terminal Adapter on this CM." ::= { docsSubmgt3GrpEntry 9 } docsSubmgt3GrpMtaFilterUs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic originating from the Embedded Multimedia Terminal Adapter on the referenced CM. This value corresponds to the 'MTA Upstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterUpDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic originating from the Embedded Multimedia Terminal Adapter on this CM." ::= { docsSubmgt3GrpEntry 10 } docsSubmgt3GrpStbFilterDs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic destined for the Embedded Set-Top Box on the referenced CM. This value corresponds to the 'STB Downstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterDownDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic destined to the Embedded Set-Top Box on this CM." ::= { docsSubmgt3GrpEntry 11 } docsSubmgt3GrpStbFilterUs OBJECT-TYPE SYNTAX Unsigned32 (0..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the filter group applied to traffic originating from the Embedded Set-Top Box on the referenced CM. This value corresponds to the 'STB Upstream Group' value of the 'Subscriber Management Filter Groups' encoding signaled during the CM registration or in its absence, to the SubFilterUpDef attribute of the Base object. The value zero or a filter group ID not configured in the CMTS means no filtering is applied to traffic originating from the Embedded Set-Top Box on this CM." ::= { docsSubmgt3GrpEntry 12 } docsSubmgt3FilterGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsSubmgt3FilterGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes a set of filter or classifier criteria. Classifiers are assigned by group to the individual CMs. That assignment is made via the 'Subscriber Management TLVs' encodings sent upstream from the CM to the CMTS during registration or in their absence, default values configured in the CMTS. A Filter Group ID (GrpId) is a set of rules that correspond to the expansion of a UDC Group ID into UDC individual classification rules. The Filter Group Ids are generated whenever the CMTS is configured to send UDCs during the CM registration process. Implementation of L2 classification criteria is optional for the CMTS; LLC/MAC upstream and downstream filter criteria can be ignored during the packet matching process." ::= { docsSubmgt3MibObjects 5} docsSubmgt3FilterGrpEntry OBJECT-TYPE SYNTAX DocsSubmgt3FilterGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of docsSubmgt3FilterGrpTable. The CMTS persists all instances of the FilterGrp object across reinitializations." INDEX { docsSubmgt3FilterGrpGrpId, docsSubmgt3FilterGrpRuleId } ::= { docsSubmgt3FilterGrpTable 1 } DocsSubmgt3FilterGrpEntry ::= SEQUENCE { docsSubmgt3FilterGrpGrpId Unsigned32, docsSubmgt3FilterGrpRuleId Unsigned32, docsSubmgt3FilterGrpAction INTEGER, docsSubmgt3FilterGrpPriority Unsigned32, docsSubmgt3FilterGrpIpTosLow OCTET STRING, docsSubmgt3FilterGrpIpTosHigh OCTET STRING, docsSubmgt3FilterGrpIpTosMask OCTET STRING, docsSubmgt3FilterGrpIpProtocol Unsigned32, docsSubmgt3FilterGrpInetAddrType InetAddressType, docsSubmgt3FilterGrpInetSrcAddr InetAddress, docsSubmgt3FilterGrpInetSrcMask InetAddress, docsSubmgt3FilterGrpInetDestAddr InetAddress, docsSubmgt3FilterGrpInetDestMask InetAddress, docsSubmgt3FilterGrpSrcPortStart InetPortNumber, docsSubmgt3FilterGrpSrcPortEnd InetPortNumber, docsSubmgt3FilterGrpDestPortStart InetPortNumber, docsSubmgt3FilterGrpDestPortEnd InetPortNumber, docsSubmgt3FilterGrpDestMacAddr MacAddress, docsSubmgt3FilterGrpDestMacMask MacAddress, docsSubmgt3FilterGrpSrcMacAddr MacAddress, docsSubmgt3FilterGrpEnetProtocolType INTEGER, docsSubmgt3FilterGrpEnetProtocol Unsigned32, docsSubmgt3FilterGrpUserPriLow Unsigned32, docsSubmgt3FilterGrpUserPriHigh Unsigned32, docsSubmgt3FilterGrpVlanId Unsigned32, docsSubmgt3FilterGrpClassPkts Counter64, docsSubmgt3FilterGrpFlowLabel Unsigned32, docsSubmgt3FilterGrpCmInterfaceMask DocsL2vpnIfList, docsSubmgt3FilterGrpRowStatus RowStatus } docsSubmgt3FilterGrpGrpId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key is an identifier for a set of classifiers known as a filter group. Each CM may be associated with several filter groups for its upstream and downstream traffic, one group per target end point on the CM as defined in the Grp object. Typically, many CMs share a common set of filter groups." ::= { docsSubmgt3FilterGrpEntry 1 } docsSubmgt3FilterGrpRuleId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents an ordered classifier identifier within the group. Filters are applied in order if the Priority attribute is not supported." ::= { docsSubmgt3FilterGrpEntry 2 } docsSubmgt3FilterGrpAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the action to take upon this filter matching. 'permit' means to stop the classification matching and accept the packet for further processing. 'deny' means to drop the packet." DEFVAL { permit } ::= { docsSubmgt3FilterGrpEntry 3 } docsSubmgt3FilterGrpPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute defines the order in which classifiers are compared against packets. The higher the value, the higher the priority." DEFVAL { 0 } ::= { docsSubmgt3FilterGrpEntry 4 } docsSubmgt3FilterGrpIpTosLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the low value of a range of ToS (Type of Service) octet values. This object is defined as an 8-bit octet as per the DOCSIS Specification for packet classification. The IP ToS octet, as originally defined in RFC 791, has been superseded by the 6-bit Differentiated Services Field (DSField, RFC 3260) and the 2-bit Explicit Congestion Notification Field (ECN field, RFC 3168)." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804. RFC 791. RFC 3260. RFC 3168." DEFVAL { '00'H } ::= { docsSubmgt3FilterGrpEntry 5 } docsSubmgt3FilterGrpIpTosHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the high value of a range of ToS octet values. This object is defined as an 8-bit octet as per the DOCSIS Specification for packet classification. The IP ToS octet, as originally defined in RFC 791, has been superseded by the 6-bit Differentiated Services Field (DSField, RFC 3260) and the 2-bit Explicit Congestion Notification Field (ECN field, RFC 3168)." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I01-060804. RFC 791. RFC 3260. RFC 3168." DEFVAL { '00'H } ::= { docsSubmgt3FilterGrpEntry 6 } docsSubmgt3FilterGrpIpTosMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the mask value that is bitwise ANDed with ToS octet in an IP packet, and the resulting value is used for range checking of IpTosLow and IpTosHigh." DEFVAL { '00'H } ::= { docsSubmgt3FilterGrpEntry 7 } docsSubmgt3FilterGrpIpProtocol OBJECT-TYPE SYNTAX Unsigned32 (0..257) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches traffic with any IP Protocol value. The value 257 by convention matches both TCP and UDP." DEFVAL { 256 } ::= { docsSubmgt3FilterGrpEntry 8 } docsSubmgt3FilterGrpInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the Internet address for InetSrcAddr, InetSrcMask, InetDestAddr, and InetDestMask." DEFVAL { unknown } ::= { docsSubmgt3FilterGrpEntry 9 } docsSubmgt3FilterGrpInetSrcAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rule when the packet's IP Source Address bitwise ANDed with the InetSrcMask value equals the InetSrcAddr value. The address type of this object is specified by the InetAddressType attribute." DEFVAL { ''H } ::= { docsSubmgt3FilterGrpEntry 10 } docsSubmgt3FilterGrpInetSrcMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents which bits of a packet's IP Source Address are compared to match this rule. An IP packet matches the rule when the packet's IP Source Address bitwise ANDed with the InetSrcMask value equals the InetSrcAddr value. The address type of this object is specified by InetAddrType." DEFVAL { ''H } ::= { docsSubmgt3FilterGrpEntry 11 } docsSubmgt3FilterGrpInetDestAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches the rule when the packet's IP Destination Address bitwise ANDed with the InetSrcMask value equals the InetDestAddr value. The address type of this object is specified by the InetAddrType attribute." DEFVAL { ''H } ::= { docsSubmgt3FilterGrpEntry 12 } docsSubmgt3FilterGrpInetDestMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents which bits of a packet's IP Destination Address are compared to match this rule. An IP packet matches the rule when the packet's IP Destination Address bitwise ANDed with the InetDestMask value equals the InetDestAddr value. The address type of this object is specified by InetAddrType." DEFVAL { ''H } ::= { docsSubmgt3FilterGrpEntry 13 } docsSubmgt3FilterGrpSrcPortStart OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the low-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UDP IP packets." DEFVAL { 0 } ::= { docsSubmgt3FilterGrpEntry 14 } docsSubmgt3FilterGrpSrcPortEnd OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the high-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UDP IP packets." DEFVAL { 65535 } ::= { docsSubmgt3FilterGrpEntry 15 } docsSubmgt3FilterGrpDestPortStart OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the low-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UDP IP packets." DEFVAL { 0 } ::= { docsSubmgt3FilterGrpEntry 16 } docsSubmgt3FilterGrpDestPortEnd OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the high-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UDP IP packets." DEFVAL { 65535 } ::= { docsSubmgt3FilterGrpEntry 17 } docsSubmgt3FilterGrpDestMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the criteria to match against an Ethernet packet MAC address bitwise ANDed with DestMacMask." DEFVAL { '000000000000'H } ::= { docsSubmgt3FilterGrpEntry 18 } docsSubmgt3FilterGrpDestMacMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with the DestMacMask attribute equals the value of the DestMacAddr attribute." DEFVAL { '000000000000'H } ::= { docsSubmgt3FilterGrpEntry 19 } docsSubmgt3FilterGrpSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the value to match against an Ethernet packet source MAC address." DEFVAL { 'FFFFFFFFFFFF'H } ::= { docsSubmgt3FilterGrpEntry 20 } docsSubmgt3FilterGrpEnetProtocolType OBJECT-TYPE SYNTAX INTEGER { none(0), ethertype(1), dsap(2), mac(3), all(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule does not use the layer 3 protocol type as a matching criteria. A value of 'ethertype' means that the rule applies only to frames that contain an EtherType value. EtherType values are contained in packets using the DEC-Intel-Xerox (DIX) encapsulation or the RFC 1042 Sub-Network Access Protocol (SNAP) encapsulation formats. A value of 'dsap' means that the rule applies only to frames using the IEEE802.3 encapsulation format with a Destination Service Access Point (DSAP) other than 0xAA (which is reserved for SNAP). A value of 'mac' means that the rule applies only to MAC management messages for MAC management messages. A value of 'all' means that the rule matches all Ethernet packets. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1p/Q header. The value 'mac' is only used for passing UDCs to CMs during Registration. The CMTS ignores filter rules that include the value of this attribute set to 'mac' for CMTS enforced upstream and downstream subscriber management filter group rules." REFERENCE "RFC1042 Sub-Network Access Protocol (SNAP) encapsulation formats." DEFVAL { none } ::= { docsSubmgt3FilterGrpEntry 21 } docsSubmgt3FilterGrpEnetProtocol OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the Ethernet protocol type to be matched against the packets. For EnetProtocolType set to 'none', this attribute is ignored when considering whether a packet matches the current rule. If the attribute EnetProtocolType is 'ethertype', this attribute gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If the attribute EnetProtocolType is 'dsap', the lower 8 bits of this attribute's value must match the DSAP octet of the packet in order to match the rule. If the Ethernet frame contains an 802.1p/Q Tag header (i.e., EtherType 0x8100), this attribute applies to the embedded EtherType field within the 802.1p/Q header." DEFVAL { 0 } ::= { docsSubmgt3FilterGrpEntry 22 } docsSubmgt3FilterGrpUserPriLow OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute applies only to Ethernet frames using the 802.1p/Q tag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of PriLow to PriHigh in order to match this rule." DEFVAL { 0 } ::= { docsSubmgt3FilterGrpEntry 23 } docsSubmgt3FilterGrpUserPriHigh OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute applies only to Ethernet frames using the 802.1p/Q tag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a 3-bit Priority field and a 12-bit VLAN number. Tagged Ethernet packets must have a 3-bit Priority field within the range of PriLow to PriHigh in order to match this rule." DEFVAL { 7 } ::= { docsSubmgt3FilterGrpEntry 24 } docsSubmgt3FilterGrpVlanId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute applies only to Ethernet frames using the 802.1p/Q tag header. Tagged packets must have a VLAN Identifier that matches the value in order to match the rule." ::= { docsSubmgt3FilterGrpEntry 25 } docsSubmgt3FilterGrpClassPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute counts the number of packets that have been classified (matched) using this rule entry. This includes all packets delivered to a Service Flow maximum rate policing function, whether or not that function drops the packets. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the CM MAC Domain interface." ::= { docsSubmgt3FilterGrpEntry 26 } docsSubmgt3FilterGrpFlowLabel OBJECT-TYPE SYNTAX Unsigned32 (0..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that the Flow Label is not specified as part of the classifier and is not matched against packets." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I03-070223, IPv6 Flow Label section in the Common Radio Frequency Interface Encodings Annex." ::= { docsSubmgt3FilterGrpEntry 27 } docsSubmgt3FilterGrpCmInterfaceMask OBJECT-TYPE SYNTAX DocsL2vpnIfList MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents a bit-mask of the CM in-bound interfaces to which this classifier applies. This attribute only applies to upstream Drop Classifiers being sent to CMs during the registration process." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I03-070223, CM Interface Mask (CMIM) Encoding section in the Common Radio Frequency Interface Encodings Annex." ::= { docsSubmgt3FilterGrpEntry 28 } docsSubmgt3FilterGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The conceptual row status of this object." ::= { docsSubmgt3FilterGrpEntry 29 } -- Conformance Definitions docsSubmgt3MibConformance OBJECT IDENTIFIER ::= { docsSubmgt3Mib 2 } docsSubmgt3MibCompliances OBJECT IDENTIFIER ::= { docsSubmgt3MibConformance 1 } docsSubmgt3MibGroups OBJECT IDENTIFIER ::= { docsSubmgt3MibConformance 2 } docsSubmgt3Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that implement the DOCSIS Subscriber Management 3 MIB." MODULE -- this MODULE MANDATORY-GROUPS { docsSubmgt3Group } ::= { docsSubmgt3MibCompliances 1 } docsSubmgt3Group OBJECT-GROUP OBJECTS { docsSubmgt3BaseCpeMaxIpv4Def, docsSubmgt3BaseCpeMaxIpv6PrefixDef, docsSubmgt3BaseCpeActiveDef, docsSubmgt3BaseCpeLearnableDef, docsSubmgt3BaseSubFilterDownDef, docsSubmgt3BaseSubFilterUpDef, docsSubmgt3BaseCmFilterDownDef, docsSubmgt3BaseCmFilterUpDef, docsSubmgt3BasePsFilterDownDef, docsSubmgt3BasePsFilterUpDef, docsSubmgt3BaseMtaFilterDownDef, docsSubmgt3BaseMtaFilterUpDef, docsSubmgt3BaseStbFilterDownDef, docsSubmgt3BaseStbFilterUpDef, docsSubmgt3CpeCtrlMaxCpeIpv4, docsSubmgt3CpeCtrlMaxCpeIpv6Prefix, docsSubmgt3CpeCtrlActive, docsSubmgt3CpeCtrlLearnable, docsSubmgt3CpeCtrlReset, docsSubmgt3CpeCtrlLastReset, docsSubmgt3CpeIpAddrType, docsSubmgt3CpeIpAddr, docsSubmgt3CpeIpAddrPrefixLen, docsSubmgt3CpeIpLearned, docsSubmgt3CpeIpType, docsSubMgt3GrpUdcGroupIds, docsSubMgt3GrpUdcSentInRegRsp, docsSubmgt3GrpSubFilterDs, docsSubmgt3GrpSubFilterUs, docsSubmgt3GrpCmFilterDs, docsSubmgt3GrpCmFilterUs, docsSubmgt3GrpPsFilterDs, docsSubmgt3GrpPsFilterUs, docsSubmgt3GrpMtaFilterDs, docsSubmgt3GrpMtaFilterUs, docsSubmgt3GrpStbFilterDs, docsSubmgt3GrpStbFilterUs, docsSubmgt3FilterGrpAction, docsSubmgt3FilterGrpPriority, docsSubmgt3FilterGrpIpTosLow, docsSubmgt3FilterGrpIpTosHigh, docsSubmgt3FilterGrpIpTosMask, docsSubmgt3FilterGrpIpProtocol, docsSubmgt3FilterGrpInetAddrType, docsSubmgt3FilterGrpInetSrcAddr, docsSubmgt3FilterGrpInetSrcMask, docsSubmgt3FilterGrpInetDestAddr, docsSubmgt3FilterGrpInetDestMask, docsSubmgt3FilterGrpSrcPortStart, docsSubmgt3FilterGrpSrcPortEnd, docsSubmgt3FilterGrpDestPortStart, docsSubmgt3FilterGrpDestPortEnd, docsSubmgt3FilterGrpDestMacAddr, docsSubmgt3FilterGrpDestMacMask, docsSubmgt3FilterGrpSrcMacAddr, docsSubmgt3FilterGrpEnetProtocolType, docsSubmgt3FilterGrpEnetProtocol, docsSubmgt3FilterGrpUserPriLow, docsSubmgt3FilterGrpUserPriHigh, docsSubmgt3FilterGrpVlanId, docsSubmgt3FilterGrpClassPkts, docsSubmgt3FilterGrpFlowLabel, docsSubmgt3FilterGrpCmInterfaceMask, docsSubmgt3FilterGrpRowStatus } STATUS current DESCRIPTION "Group of objects implemented in the CMTS." ::= { docsSubmgt3MibGroups 1 } END