-- ***************************************************************** -- ciscoWanSONET MIB -- -- May 2002, Subra Hegde -- -- Copyright (c) 1999,2000,2002 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-WAN-SONET-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB PerfIntervalCount FROM PerfHist-TC-MIB ciscoWan FROM CISCOWAN-SMI; ciscoWANSonetMIB MODULE-IDENTITY LAST-UPDATED "200205200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558)." REVISION "200205200000Z" DESCRIPTION "Importing Unsigned32 from SNMPv2-SMI." REVISION "200003060000Z" DESCRIPTION "Initial version of the MIB Module." ::= { ciscoWan 3 } ciscoWANSonetMIBObjects OBJECT IDENTIFIER ::= { ciscoWANSonetMIB 1} -- sonet section cwsSection OBJECT IDENTIFIER ::= { ciscoWANSonetMIBObjects 1} -- sonet line cwsLine OBJECT IDENTIFIER ::= { ciscoWANSonetMIBObjects 2} -- sonet path cwsPath OBJECT IDENTIFIER ::= { ciscoWANSonetMIBObjects 3} -- ---------------------------------------------------------------- -- -- Sonet Section Alarm table -- -- ---------------------------------------------------------------- cwsSectionAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsSectionAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Section Alarm table. This table contains objects for setting alarm thresholds and reading alarm severity. " ::= { cwsSection 1 } cwsSectionAlarmEntry OBJECT-TYPE SYNTAX CwsSectionAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alarm table. The entries exist for active sonet lines, with default threshold values. Thresholds may be configured for errored seconds(ES), severely errored seconds(SES), severely errored framing seconds(SEFS) and coding violations(CV) for section layer sonet lines. Once these thresholds are exceeded, minor or major alarm is raised. Please refer RFC1595 for descriptions of ES,SES,SEFS,CV" INDEX { ifIndex } ::= { cwsSectionAlarmTable 1 } CwsSectionAlarmEntry ::= SEQUENCE { cwsSectionStatisticalAlarmSeverity INTEGER, cwsSectionCurrentESsThreshold Unsigned32, cwsSectionTotalESsThreshold Unsigned32, cwsSectionCurrentSESsThreshold Unsigned32, cwsSectionTotalSESsThreshold Unsigned32, cwsSectionCurrentSEFSsThreshold Unsigned32, cwsSectionTotalSEFSsThreshold Unsigned32, cwsSectionCurrentCVsThreshold Unsigned32, cwsSectionTotalCVsThreshold Unsigned32, cwsSectionStatAlarmStatus Unsigned32 } cwsSectionStatisticalAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor(1), major(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm." DEFVAL { none } ::= { cwsSectionAlarmEntry 1 } cwsSectionCurrentESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for errored seconds(ES), for the current 15-min interval, above which alarm is generated. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {20} ::= { cwsSectionAlarmEntry 2 } cwsSectionTotalESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for errored seconds(ES), for the 24 hour interval, above which alarm is generated. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {20} ::= { cwsSectionAlarmEntry 3 } cwsSectionCurrentSESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "severely errored seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for severely errored seconds(SES) for the current 15-min interval, above which alarm is generated." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsSectionAlarmEntry 4 } cwsSectionTotalSESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "severely errored seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for severely errored seconds(SES) for the 24 hour interval, above which alarm is generated." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsSectionAlarmEntry 5 } cwsSectionCurrentSEFSsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "severely errored framing seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for severely errored framing seconds(SEFS), above which alarm is generated." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsSectionAlarmEntry 6 } cwsSectionTotalSEFSsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "severely errored framing seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for severely errored framing seconds(SEFS) for the 24 hour interval, above which alarm is generated." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsSectionAlarmEntry 7 } cwsSectionCurrentCVsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "coding violations" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for coding violations(CV), above which alarm is generated." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {25} ::= { cwsSectionAlarmEntry 8 } cwsSectionTotalCVsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) UNITS "coding violations" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for coding violations(CV) for 24 hour interval, above which alarm is generated." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {25} ::= { cwsSectionAlarmEntry 9 } cwsSectionStatAlarmStatus OBJECT-TYPE SYNTAX Unsigned32 (1..511) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the status of the interface. When an alarm is raised, this would indicate which threshold was exceeded. This object is updated every 15-minutes. Once the current 15-min window has passed, and there are no errors in the current 15-min window, the object is cleared from the lower level sonet task. The cwsSectionStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The various bit positions are: 1 sonetSectionTotalESs 2 sonetSectionTotalSESs 3 sonetSectionTotalSEFSs 4 sonetSectionTotalCVs 5 sonetSectionCurrentESs 6 sonetSectionCurrentSESs 7 sonetSectionCurrentSEFSs 8 sonetSectionCurrentCVs" ::= { cwsSectionAlarmEntry 10 } -- -- -- Sonet Section Current 24 hour period table -- -- cwsSectionCurrent24HrTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsSectionCurrent24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains sonet section related current 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsSectionCurrent24HrTable table get reset to 0." ::= { cwsSection 2 } cwsSectionCurrent24HrEntry OBJECT-TYPE SYNTAX CwsSectionCurrent24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the current 24 hour table. The entries exist for active sonet lines." INDEX { ifIndex } ::= { cwsSectionCurrent24HrTable 1 } CwsSectionCurrent24HrEntry ::= SEQUENCE { cwsSectionCurrent24HrESs PerfIntervalCount, cwsSectionCurrent24HrSESs PerfIntervalCount, cwsSectionCurrent24HrSEFSs PerfIntervalCount, cwsSectionCurrent24HrCVs PerfIntervalCount } cwsSectionCurrent24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored seconds encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsSectionCurrent24HrEntry 1 } cwsSectionCurrent24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SESs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsSectionCurrent24HrEntry 2 } cwsSectionCurrent24HrSEFSs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored framing seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SEFSs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsSectionCurrent24HrEntry 3 } cwsSectionCurrent24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CVs encountered in current 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsSectionCurrent24HrEntry 4 } -- -- -- Sonet Section Previous 24 hour period table -- -- cwsSectionPrevious24HrTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsSectionPrevious24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains sonet section previous 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsSectionPrevious24HrTable table get reset to 0." ::= { cwsSection 3 } cwsSectionPrevious24HrEntry OBJECT-TYPE SYNTAX CwsSectionPrevious24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the current 24 hour table. The entries exist for active sonet lines." INDEX { ifIndex } ::= { cwsSectionPrevious24HrTable 1 } CwsSectionPrevious24HrEntry ::= SEQUENCE { cwsSectionPrevious24HrESs PerfIntervalCount, cwsSectionPrevious24HrSESs PerfIntervalCount, cwsSectionPrevious24HrSEFSs PerfIntervalCount, cwsSectionPrevious24HrCVs PerfIntervalCount } cwsSectionPrevious24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored seconds encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsSectionPrevious24HrEntry 1 } cwsSectionPrevious24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SESs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsSectionPrevious24HrEntry 2 } cwsSectionPrevious24HrSEFSs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored framing seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SEFSs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5,GR-253-CORE" ::= { cwsSectionPrevious24HrEntry 3 } cwsSectionPrevious24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CVs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsSectionPrevious24HrEntry 4 } -- ---------------------------------------------------------------- -- -- Line Alarm Table -- -- ---------------------------------------------------------------- -- SONET/SDH Line Alarm Table. -- Changing any threshold will effect both the Near End and -- Far End threshold. cwsLineAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsLineAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Line Alarm table. This table contains objects which are thresholds that the user can set. Once the threshold is exceeded, an alarm is flagged.Changing any threshold will affect both the Near End and Far End(remote end of the line) threshold." ::= { cwsLine 1 } cwsLineAlarmEntry OBJECT-TYPE SYNTAX CwsLineAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Line Alarm table. The entries may be created for an ifType value of sonet(39). Thresholds maybe specified for errored seconds(ES), severely errored seconds(SES), severely errored framing seconds(SEFS),coding violations(CV) and unavailable seconds (UAS) for line layer of sonet lines. Once these thresholds are exceeded, minor or major alarm is raised. Please refer RFC1595 for descriptions of ES,SES,CV,UAS" INDEX { ifIndex } ::= { cwsLineAlarmTable 1 } CwsLineAlarmEntry ::= SEQUENCE { cwsLineStatisticalAlarmSeverity INTEGER, cwsLineCurrentESsThreshold Unsigned32, cwsLineTotalESsThreshold Unsigned32, cwsLineCurrentSESsThreshold Unsigned32, cwsLineTotalSESsThreshold Unsigned32, cwsLineCurrentCVsThreshold Unsigned32, cwsLineTotalCVsThreshold Unsigned32, cwsLineCurrentUASsThreshold Unsigned32, cwsLineTotalUASsThreshold Unsigned32, cwsLineStatAlarmStatus Unsigned32 } cwsLineStatisticalAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor(1), major(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm." DEFVAL { none } ::= { cwsLineAlarmEntry 1 } cwsLineCurrentESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for errored seconds(ES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {20} ::= { cwsLineAlarmEntry 2 } cwsLineTotalESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for errored seconds(ES) for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {20} ::= { cwsLineAlarmEntry 3 } cwsLineCurrentSESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the severely errored seconds(SES) threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsLineAlarmEntry 4 } cwsLineTotalSESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the severely errored seconds(SES) threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsLineAlarmEntry 5 } cwsLineCurrentCVsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Coding violations(CV) threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsLineAlarmEntry 6 } cwsLineTotalCVsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Coding violations(CV) threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsLineAlarmEntry 7 } cwsLineCurrentUASsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Unavailable Seconds(UAS) threshold for the current 15-min, above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsLineAlarmEntry 8 } cwsLineTotalUASsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Unavailable Seconds(UAS) threshold for the 24 hour interval above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsLineAlarmEntry 9 } cwsLineStatAlarmStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the status of the sonet line. This object is updated every 15-minutes. Once the current 15-min window has passed, and there are no errors in the current 15-min window, the object is cleared from the lower level sonet task. The cwsLineStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The various bit-positions are: 1 sonetLineTotalESs 2 sonetLineTotalSESs 3 sonetLineTotalCVs 4 sonetLineTotalUASs 5 sonetLineCurrentESs 6 sonetLineCurrentSESs 7 sonetLineCurrentCVs 8 sonetLineCurrentUASs 9 sonetFarEndLineTotalESs 10 sonetFarEndLineTotalSESs 11 sonetFarEndLineTotalCVs 12 sonetFarEndLineTotalUASs 13 sonetFarEndLineCurrentESs 14 sonetFarEndLineCurrentSESs 15 sonetFarEndLineCurrentCVs 16 sonetFarEndLineCurrentUASs" ::= { cwsLineAlarmEntry 10 } -- -- -- Sonet line Current 24 hour period table -- -- cwsLineCurrent24HrTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsLineCurrent24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains sonet line related current 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsLineCurrent24HrTable table get reset to 0." ::= { cwsLine 2 } cwsLineCurrent24HrEntry OBJECT-TYPE SYNTAX CwsLineCurrent24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the current 24 hour table. The entries exist for active sonet lines." INDEX { ifIndex } ::= { cwsLineCurrent24HrTable 1 } CwsLineCurrent24HrEntry ::= SEQUENCE { cwsLineCurrent24HrESs PerfIntervalCount, cwsLineCurrent24HrSESs PerfIntervalCount, cwsLineCurrent24HrCVs PerfIntervalCount, cwsLineCurrent24HrUASs PerfIntervalCount, cwsFELineCurrent24HrESs PerfIntervalCount, cwsFELineCurrent24HrSESs PerfIntervalCount, cwsFELineCurrent24HrCVs PerfIntervalCount, cwsFELineCurrent24HrUASs PerfIntervalCount } cwsLineCurrent24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored seconds encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 1 } cwsLineCurrent24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SESs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 2 } cwsLineCurrent24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CVs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 3 } cwsLineCurrent24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of UASs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 4 } cwsFELineCurrent24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end errored seconds encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 5 } cwsFELineCurrent24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end SESs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 6 } cwsFELineCurrent24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end CVs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 7 } cwsFELineCurrent24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end UASs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLineCurrent24HrEntry 8 } -- -- -- Sonet Line Previous 24 hour period table -- -- cwsLinePrevious24HrTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsLinePrevious24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains sonet line previous 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsLinePrevious24HrTable table get reset to 0." ::= { cwsLine 3 } cwsLinePrevious24HrEntry OBJECT-TYPE SYNTAX CwsLinePrevious24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the current 24 hour table. The entries exist for active sonet lines." INDEX { ifIndex } ::= { cwsLinePrevious24HrTable 1 } CwsLinePrevious24HrEntry ::= SEQUENCE { cwsLinePrevious24HrESs PerfIntervalCount, cwsLinePrevious24HrSESs PerfIntervalCount, cwsLinePrevious24HrCVs PerfIntervalCount, cwsLinePrevious24HrUASs PerfIntervalCount, cwsFELinePrevious24HrESs PerfIntervalCount, cwsFELinePrevious24HrSESs PerfIntervalCount, cwsFELinePrevious24HrCVs PerfIntervalCount, cwsFELinePrevious24HrUASs PerfIntervalCount } cwsLinePrevious24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored seconds encountered in previous 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLinePrevious24HrEntry 1 } cwsLinePrevious24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SESs encountered in previous 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLinePrevious24HrEntry 2 } cwsLinePrevious24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CVs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLinePrevious24HrEntry 3 } cwsLinePrevious24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of UASs encountered in previous 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLinePrevious24HrEntry 4 } cwsFELinePrevious24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end errored seconds encountered in previous 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLinePrevious24HrEntry 5 } cwsFELinePrevious24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end SESs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLinePrevious24HrEntry 6 } cwsFELinePrevious24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end CVs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5,GR-253-CORE" ::= { cwsLinePrevious24HrEntry 7 } cwsFELinePrevious24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end UASs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsLinePrevious24HrEntry 8 } -- ---------------------------------------------------------------- -- -- Path Alarm Table -- -- ---------------------------------------------------------------- cwsPathAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsPathAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Path Alarm table. This table contains objects for thresholds which a user can set. When any threshold is exceeded, an alarm is set. Changing any threshold will affect both the Near End and Far End(remote end of the line) threshold." ::= { cwsPath 1 } cwsPathAlarmEntry OBJECT-TYPE SYNTAX CwsPathAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Path Alarm table. Thresholds maybe specified for errored seconds(ES), severely errored seconds(SES), severely errored framing seconds(SEFS),coding violations(CV) and unavailable seconds (UAS) for path layer of sonet lines. Once these thresholds are exceeded, minor or major alarm is raised. Please refer RFC1595 for descriptions of ES,SES,SEFS,CV,UAS." INDEX { ifIndex } ::= { cwsPathAlarmTable 1 } CwsPathAlarmEntry ::= SEQUENCE { cwsPathStatisticalAlarmSeverity INTEGER, cwsPathCurrentESsThreshold Unsigned32, cwsPathTotalESsThreshold Unsigned32, cwsPathCurrentSESsThreshold Unsigned32, cwsPathTotalSESsThreshold Unsigned32, cwsPathCurrentCVsThreshold Unsigned32, cwsPathTotalCVsThreshold Unsigned32, cwsPathCurrentUASsThreshold Unsigned32, cwsPathTotalUASsThreshold Unsigned32, cwsPathStatAlarmStatus Unsigned32 } cwsPathStatisticalAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor(1), major(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm." DEFVAL { none } ::= { cwsPathAlarmEntry 1 } cwsPathCurrentESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for errored seconds(ES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End (remote end of the line) and Near End(this end of the line)." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {20} ::= { cwsPathAlarmEntry 2 } cwsPathTotalESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for errored seconds(ES) for the 24-hour interval, above which alarm is generated. This threshold is the same for Far End (remote end of the line) and Near End(this end of the line)." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {20} ::= { cwsPathAlarmEntry 3 } cwsPathCurrentSESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for severely errored seconds(SES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsPathAlarmEntry 4 } cwsPathTotalSESsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the threshold for severely errored seconds(SES) for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {3} ::= { cwsPathAlarmEntry 5 } cwsPathCurrentCVsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the coding violations threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {25} ::= { cwsPathAlarmEntry 6 } cwsPathTotalCVsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the coding violations threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {25} ::= { cwsPathAlarmEntry 7 } cwsPathCurrentUASsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the unavailable seconds threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {10} ::= { cwsPathAlarmEntry 8 } cwsPathTotalUASsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the unavailable seconds threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End. " REFERENCE " RFC2558 Section 3.5, GR-253-CORE " DEFVAL {10} ::= { cwsPathAlarmEntry 9 } cwsPathStatAlarmStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the status of the interface. The cwsPathStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The following ar the bit positions: 1 sonetPathTotalESs 2 sonetPathTotalSESs 3 sonetPathTotalCVs 4 sonetPathTotalUASs 5 sonetPathCurrentESs 6 sonetPathCurrentSESs 7 sonetPathCurrentCVs 8 sonetPathCurrentUASs 9 sonetFarEndPathTotalESs 10 sonetFarEndPathTotalSESs 11 sonetFarEndPathTotalCVs 12 sonetFarEndPathTotalUASs 13 sonetFarEndPathCurrentESs 14 sonetFarEndPathCurrentSESs 15 sonetFarEndPathCurrentCVs 16 sonetFarEndPathCurrentUASs" ::= { cwsPathAlarmEntry 10 } -- ---------------------------------------------------------------- -- -- Path Current Table -- -- ---------------------------------------------------------------- cwsPathCurrent24HrTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsPathCurrent24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains sonet path related current 24 hour interval counter. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsPathCurrent24HrTable table get reset to 0." ::= { cwsPath 2 } cwsPathCurrent24HrEntry OBJECT-TYPE SYNTAX CwsPathCurrent24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in path current table." INDEX { ifIndex } ::= { cwsPathCurrent24HrTable 1 } CwsPathCurrent24HrEntry ::= SEQUENCE { cwsPathCurrent24HrESs PerfIntervalCount, cwsPathCurrent24HrSESs PerfIntervalCount, cwsPathCurrent24HrCVs PerfIntervalCount, cwsPathCurrent24HrUASs PerfIntervalCount, cwsFEPathCurrent24HrESs PerfIntervalCount, cwsFEPathCurrent24HrSESs PerfIntervalCount, cwsFEPathCurrent24HrCVs PerfIntervalCount, cwsFEPathCurrent24HrUASs PerfIntervalCount } cwsPathCurrent24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored seconds encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathCurrent24HrEntry 1 } cwsPathCurrent24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SESs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5,GR-253-CORE " ::= { cwsPathCurrent24HrEntry 2 } cwsPathCurrent24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CVs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathCurrent24HrEntry 3 } cwsPathCurrent24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of UASs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathCurrent24HrEntry 4 } cwsFEPathCurrent24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end errored seconds encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathCurrent24HrEntry 5 } cwsFEPathCurrent24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end SESs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathCurrent24HrEntry 6 } cwsFEPathCurrent24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end CVs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathCurrent24HrEntry 7 } cwsFEPathCurrent24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end UASs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5,GR-253-CORE " ::= { cwsPathCurrent24HrEntry 8 } -- ---------------------------------------------------------------- -- -- Path Previous 24 hour Table -- -- ---------------------------------------------------------------- cwsPathPrevious24HrTable OBJECT-TYPE SYNTAX SEQUENCE OF CwsPathPrevious24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains sonet path previous 24 hour interval counter. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsPathPrevious24HrTable table get reset to 0." ::= { cwsPath 3 } cwsPathPrevious24HrEntry OBJECT-TYPE SYNTAX CwsPathPrevious24HrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in path current table." INDEX { ifIndex } ::= { cwsPathPrevious24HrTable 1 } CwsPathPrevious24HrEntry ::= SEQUENCE { cwsPathPrevious24HrESs PerfIntervalCount, cwsPathPrevious24HrSESs PerfIntervalCount, cwsPathPrevious24HrCVs PerfIntervalCount, cwsPathPrevious24HrUASs PerfIntervalCount, cwsFEPathPrevious24HrESs PerfIntervalCount, cwsFEPathPrevious24HrSESs PerfIntervalCount, cwsFEPathPrevious24HrCVs PerfIntervalCount, cwsFEPathPrevious24HrUASs PerfIntervalCount } cwsPathPrevious24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errored seconds encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathPrevious24HrEntry 1 } cwsPathPrevious24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SESs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathPrevious24HrEntry 2 } cwsPathPrevious24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CVs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathPrevious24HrEntry 3 } cwsPathPrevious24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of UASs encountered in current 24 hour interval." REFERENCE " RFC2558 Section 3.5,GR-253-CORE " ::= { cwsPathPrevious24HrEntry 4 } cwsFEPathPrevious24HrESs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end errored seconds encountered in previous 24 hour interval." REFERENCE " RFC2558 Section 3.5,GR-253-CORE " ::= { cwsPathPrevious24HrEntry 5 } cwsFEPathPrevious24HrSESs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "severely errored seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end SESs encountered in previous 24 hour interval." REFERENCE " RFC2558 Section 3.5,GR-253-CORE " ::= { cwsPathPrevious24HrEntry 6 } cwsFEPathPrevious24HrCVs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "coding violations" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end CVs encountered in previous 24 hour interval." REFERENCE " RFC2558 Section 3.5, GR-253-CORE " ::= { cwsPathPrevious24HrEntry 7 } cwsFEPathPrevious24HrUASs OBJECT-TYPE SYNTAX PerfIntervalCount UNITS "Unavailable seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of far end UASs encountered in previous 24 hour interval." REFERENCE "RFC2558 Section 3.5, GR-253-CORE" ::= { cwsPathPrevious24HrEntry 8 } -- conformance information ciscoWANSonetMIBConformance OBJECT IDENTIFIER ::= { ciscoWANSonetMIB 2 } ciscoWANSonetMIBCompliances OBJECT IDENTIFIER ::= {ciscoWANSonetMIBConformance 1} ciscoWANSonetMIBGroups OBJECT IDENTIFIER ::= {ciscoWANSonetMIBConformance 2} ciscoWANSonetMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The Compliance statement for ciscoSonet management group." MODULE -- this module MANDATORY-GROUPS { ciscoWANSonetSectAlarmMIBGroup, ciscoWANSonetLineAlarmMIBGroup, ciscoWANSonetPathAlarmMIBGroup } GROUP ciscoWANSonetLinePrev24HrMIBGroup DESCRIPTION "Implementation of this group is optional." GROUP ciscoWANSonetFELineAlarmMIBGroup DESCRIPTION "Implementation of this group is optional. To be supported if far end line tables in standard sonet MIB are supported." GROUP ciscoWANSonetFELinePrev24HrMIBGroup DESCRIPTION "Implementation of this group is optional." GROUP ciscoWANSonetPathPrev24HrMIBGroup DESCRIPTION "Implementation of this group is optional." GROUP ciscoWANSonetFEPathAlarmMIBGroup DESCRIPTION "Implementation of this group is optional. To be supported if far end path tables in standard sonet MIB are supported." GROUP ciscoWANSonetFEPathPrev24HrMIBGroup DESCRIPTION "Implementation of this group is optional." ::= {ciscoWANSonetMIBCompliances 1} -- units of conformance ciscoWANSonetSectAlarmMIBGroup OBJECT-GROUP OBJECTS { cwsSectionStatisticalAlarmSeverity, cwsSectionCurrentESsThreshold, cwsSectionTotalESsThreshold, cwsSectionCurrentSESsThreshold, cwsSectionTotalSESsThreshold, cwsSectionCurrentSEFSsThreshold, cwsSectionTotalSEFSsThreshold, cwsSectionCurrentCVsThreshold, cwsSectionTotalCVsThreshold, cwsSectionStatAlarmStatus, cwsSectionCurrent24HrESs, cwsSectionCurrent24HrSESs, cwsSectionCurrent24HrSEFSs, cwsSectionCurrent24HrCVs } STATUS current DESCRIPTION " These are objects related to ciscoSonet alarm group " ::= { ciscoWANSonetMIBGroups 1} ciscoWANSonetSectPrev24HrMIBGroup OBJECT-GROUP OBJECTS { cwsSectionPrevious24HrESs, cwsSectionPrevious24HrSESs, cwsSectionPrevious24HrSEFSs, cwsSectionPrevious24HrCVs } STATUS current DESCRIPTION "Sonet section previous 24 hour counter objects." ::= { ciscoWANSonetMIBGroups 2} ciscoWANSonetLineAlarmMIBGroup OBJECT-GROUP OBJECTS { cwsLineStatisticalAlarmSeverity, cwsLineCurrentESsThreshold, cwsLineTotalESsThreshold, cwsLineCurrentSESsThreshold, cwsLineTotalSESsThreshold, cwsLineCurrentCVsThreshold, cwsLineTotalCVsThreshold, cwsLineCurrentUASsThreshold, cwsLineTotalUASsThreshold, cwsLineStatAlarmStatus, cwsLineCurrent24HrESs, cwsLineCurrent24HrSESs, cwsLineCurrent24HrCVs, cwsLineCurrent24HrUASs } STATUS current DESCRIPTION "These are objects related to ciscoSonet line alarm group." ::= { ciscoWANSonetMIBGroups 3} ciscoWANSonetFELineAlarmMIBGroup OBJECT-GROUP OBJECTS { cwsFELineCurrent24HrESs, cwsFELineCurrent24HrSESs, cwsFELineCurrent24HrCVs, cwsFELineCurrent24HrUASs } STATUS current DESCRIPTION "These are sonet far end line current 24 hour counter objects." ::= { ciscoWANSonetMIBGroups 4} ciscoWANSonetLinePrev24HrMIBGroup OBJECT-GROUP OBJECTS { cwsLinePrevious24HrESs, cwsLinePrevious24HrSESs, cwsLinePrevious24HrCVs, cwsLinePrevious24HrUASs } STATUS current DESCRIPTION "Sonet line previous 24 hour counter objects." ::= { ciscoWANSonetMIBGroups 5} ciscoWANSonetFELinePrev24HrMIBGroup OBJECT-GROUP OBJECTS { cwsFELinePrevious24HrESs, cwsFELinePrevious24HrSESs, cwsFELinePrevious24HrCVs, cwsFELinePrevious24HrUASs } STATUS current DESCRIPTION "Far end sonet line previous 24 hour counter objects." ::= { ciscoWANSonetMIBGroups 6} ciscoWANSonetPathAlarmMIBGroup OBJECT-GROUP OBJECTS { cwsPathStatisticalAlarmSeverity, cwsPathCurrentESsThreshold, cwsPathTotalESsThreshold, cwsPathCurrentSESsThreshold, cwsPathTotalSESsThreshold, cwsPathCurrentCVsThreshold, cwsPathTotalCVsThreshold, cwsPathCurrentUASsThreshold, cwsPathTotalUASsThreshold, cwsPathStatAlarmStatus, cwsPathCurrent24HrESs, cwsPathCurrent24HrSESs, cwsPathCurrent24HrCVs, cwsPathCurrent24HrUASs } STATUS current DESCRIPTION " These are objects related to ciscoSonet path alarm group " ::= { ciscoWANSonetMIBGroups 7} ciscoWANSonetFEPathAlarmMIBGroup OBJECT-GROUP OBJECTS { cwsFEPathCurrent24HrESs, cwsFEPathCurrent24HrSESs, cwsFEPathCurrent24HrCVs, cwsFEPathCurrent24HrUASs } STATUS current DESCRIPTION "These are far end sonet path current 24 hour counter objects." ::= { ciscoWANSonetMIBGroups 8} ciscoWANSonetPathPrev24HrMIBGroup OBJECT-GROUP OBJECTS { cwsPathPrevious24HrESs, cwsPathPrevious24HrSESs, cwsPathPrevious24HrCVs, cwsPathPrevious24HrUASs } STATUS current DESCRIPTION "Sonet path previous 24 hour counters." ::= { ciscoWANSonetMIBGroups 9} ciscoWANSonetFEPathPrev24HrMIBGroup OBJECT-GROUP OBJECTS { cwsFEPathPrevious24HrESs, cwsFEPathPrevious24HrSESs, cwsFEPathPrevious24HrCVs, cwsFEPathPrevious24HrUASs } STATUS current DESCRIPTION "Theses are far end sonet path previous 24 hour counter objects." ::= { ciscoWANSonetMIBGroups 10} END