-- ***************************************************************** -- ciscoWANRsrcPart MIB -- -- March, 2002 -- -- Copyright (c) 1999 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-WAN-RSRC-PART-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI TruthValue, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI; ciscoWANRsrcPartMIB MODULE-IDENTITY LAST-UPDATED "200209140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The MIB module to manage resource partition objects. A resource partition is configured on a virtual interface (ifType value atmVirtual(149)) or atm interface (ifType value atm(37)). An administrator can partition connection related resources like VPI, VCI ranges, bandwidth and total amount of available connection entries in the switch through these MIB tables. Terminolgies used: VSI - Virtual Switch Interface, a hardware-independent switch control protocol. This allows a Switch to be controlled by a multiple controllers such as PNNI, MPLS. These control planes can be internal or external to the switch.The VSI interface defines the messages and associated functions which allow communication between the controller and the switch.This interface is expected to support all types of connections (voice,data,frame relay,ATM) for PVCs, SPVCs and SVCs. VSI Master - software component which requests connections and receives switch generic information. This controls one or more VSI Slaves. This may run on the switch or a dedicated controller platform. This is the master module.It performs the interface to the higher layer networking software and handles all VSI related functions. Controller - Software ( and possibly hardware) which manages topology and network resources and performs VSI Master function. This performs source routing for end-to-end SVCs, including general call acceptance GCAC,setup calls with other controllers. PNNI and MPLS are examples of controllers. ILMI - Integrated Local Management Interface (ILMI). An ATM Forum defined, SNMP-based management protocol for an ATM UNI. It provides interface status and configuration information, and also supports dynamic ATM address registration. CAC - Call Admission Control (CAC). When a new call coming to the gateway, a process checks the availability of the resources involved in the connection establishment before the gateway sets up the call. ATM - Asynchronous Transfer Mode (ATM). PNNI - Private Network to Network Interface (PNNI). MPLS - MultiProtocol Label Switching (MPLS). GCAC - Generic Connection Admittance Control (GCAC). PVC - Permanent Virtual Circuits (PVC). SVC - Switched Virtual Circuits (SVC). SPVC - Soft Permanent Virtual Circuits (SPVC). VPI - Virtual Path Identifier (VPI). VCI - Virtual Circuit Identifier (VCI). " REVISION "200209140000Z" DESCRIPTION "Added the cwRsrcSvcAggrTable to manage SVC aggregate resources. Added the cwRsrcPartMIBComplianceRev1 which supersedes the cwRsrcPartMIBCompliance after the group cwRsrcSvcAggrGroup was added." REVISION "200203060000Z" DESCRIPTION "Made following changes: (1) Changed cwRsrcPartSignallingVpi range to be consistent with values defined in standard document. (2) Changed cwRsrcPartIlmiTable description." REVISION "9910120000Z" DESCRIPTION "Initial version of the MIB." ::= {ciscoMgmt 125 } ciscoWANRsrcPartMIBObjects OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIB 1} cwRsrcPartConfGrp OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIBObjects 1} cwRsrcSvcAggrGrp OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIBObjects 2} -- -------------------------------------------------------------------- -- Resource Partition MIB -- -------------------------------------------------------------------- cwRsrcPartConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CwRsrcPartConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring resource partition parameters. A resource partition is configured on an interface whose ifType is atmVirtual(149) or atm(37). An entry can be added, deleted or modified. Entries in this table can be modified through the commands provided by the CLI also." ::= { cwRsrcPartConfGrp 1 } cwRsrcPartConfEntry OBJECT-TYPE SYNTAX CwRsrcPartConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a resource partition. A resource partition has to be created before connections can be added to the interface. In the following objects, ingress direction means, from network to switch, and egress direction means, from switch to network." INDEX { ifIndex, cwRsrcPartID } ::= { cwRsrcPartConfTable 1 } CwRsrcPartConfEntry ::= SEQUENCE { cwRsrcPartID Unsigned32, cwRsrcPartController Unsigned32, cwRsrcPartEgrGuarPctBwConf Unsigned32, cwRsrcPartEgrMaxPctBwConf Unsigned32, cwRsrcPartIngGuarPctBwConf Unsigned32, cwRsrcPartIngMaxPctBwConf Unsigned32, cwRsrcPartEgrPctBwUsed Unsigned32, cwRsrcPartIngPctBwUsed Unsigned32, cwRsrcPartEgrPctBwAvail Unsigned32, cwRsrcPartIngPctBwAvail Unsigned32, cwRsrcPartVpiLo Unsigned32, cwRsrcPartVpiHigh Unsigned32, cwRsrcPartVciLo Unsigned32, cwRsrcPartVciHigh Unsigned32, cwRsrcPartGuarCon Unsigned32, cwRsrcPartMaxCon Unsigned32, cwRsrcPartUsedCon Unsigned32, cwRsrcPartAvailCon Unsigned32, cwRsrcPartRowStatus RowStatus } cwRsrcPartID OBJECT-TYPE SYNTAX Unsigned32 (1.. 255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is resource partition identifier. One interface can have multiple resource partitions on it." ::= { cwRsrcPartConfEntry 1} cwRsrcPartController OBJECT-TYPE SYNTAX Unsigned32 (1.. 255) MAX-ACCESS read-create STATUS current DESCRIPTION "This is controller identifier. Once a resource partition is added the controller identified by this identifier can access resources configured for this partition." ::= { cwRsrcPartConfEntry 2} cwRsrcPartEgrGuarPctBwConf OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-create STATUS current DESCRIPTION "The guaranteed percentage bandwidth reserved for the resource partition in egress direction. The sum of all resource partition guaranteed bandwidths cannot exceed 100% of interface's guaranteed bandwidth." DEFVAL { 0 } ::= { cwRsrcPartConfEntry 3 } cwRsrcPartEgrMaxPctBwConf OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum percentage bandwidth for the resource partition in egress direction. This is not the guaranteed bandwidth. If bandwidth is available, the resource partition will be allocated bandwidth up to this value." DEFVAL { 0 } ::= { cwRsrcPartConfEntry 4 } cwRsrcPartIngGuarPctBwConf OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-create STATUS current DESCRIPTION "The guaranteed percentage bandwidth reserved for the resource partition in ingress direction. The sum of all resource partition guaranteed bandwidths cannot exceed 100% of the interface's guaranteed bandwidth." DEFVAL { 0 } ::= { cwRsrcPartConfEntry 5 } cwRsrcPartIngMaxPctBwConf OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-create STATUS current DESCRIPTION " The maximum percentage bandwidth allocated for the resource partition in ingress direction. This is not the guaranteed bandwidth. If bandwidth is available, the resource partition will be allocated bandwidth up to this value." DEFVAL { 0 } ::= { cwRsrcPartConfEntry 6 } cwRsrcPartEgrPctBwUsed OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-only STATUS current DESCRIPTION " This is the percentage bandwidth used by the resource partition in egress direction." ::= { cwRsrcPartConfEntry 7 } cwRsrcPartIngPctBwUsed OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-only STATUS current DESCRIPTION " This is the percentage bandwidth used by the resource partition in ingress direction." ::= { cwRsrcPartConfEntry 8 } cwRsrcPartEgrPctBwAvail OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-only STATUS current DESCRIPTION " This is the percentage bandwidth available on the resource partition in egress direction." ::= { cwRsrcPartConfEntry 9 } cwRsrcPartIngPctBwAvail OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) UNITS "0.0001 percentage" MAX-ACCESS read-only STATUS current DESCRIPTION " This is the percentage bandwidth available on the resource partition in ingress direction." ::= { cwRsrcPartConfEntry 10 } cwRsrcPartVpiLo OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The beginning of the VPI range for this partition. Connections provisioned on this partition must have a VPI greater than or equal to this value." ::= { cwRsrcPartConfEntry 11 } cwRsrcPartVpiHigh OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The end of the VPI range for this partition. Connections provisioned on this partition must have a VPI less than or equal to this value." ::= { cwRsrcPartConfEntry 12 } cwRsrcPartVciLo OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The beginning of the VCI range for this partition. Connections provisioned on this partition must have VCI greater than or equal to this VCI." ::= { cwRsrcPartConfEntry 13 } cwRsrcPartVciHigh OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The end of the VCI range reserved for this partition. Connections provisioned on this partition must have a VCI less than or equal to this VCI." ::= { cwRsrcPartConfEntry 14 } cwRsrcPartGuarCon OBJECT-TYPE SYNTAX Unsigned32 (0..131072) MAX-ACCESS read-create STATUS current DESCRIPTION "The guaranteed number of connections that can be configured on this partition." DEFVAL {0} ::= { cwRsrcPartConfEntry 15 } cwRsrcPartMaxCon OBJECT-TYPE SYNTAX Unsigned32 (0..131072) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of connections that can be configured on this partition." ::= { cwRsrcPartConfEntry 16 } cwRsrcPartUsedCon OBJECT-TYPE SYNTAX Unsigned32 (0..131072) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of connections currently in use on this partition." ::= { cwRsrcPartConfEntry 17 } cwRsrcPartAvailCon OBJECT-TYPE SYNTAX Unsigned32 (0..131072) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of connections available, that can be added on this partition." ::= { cwRsrcPartConfEntry 18 } cwRsrcPartRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This will add, delete or modify the partition. Resource partition can be created by setting this object to createAndGo(4). Row may be deleted by setting this object to destroy(6)." ::= { cwRsrcPartConfEntry 19 } -- -------------------------------------------------------------------- -- cwRsrcPartIlmi Table -- -------------------------------------------------------------------- cwRsrcPartIlmiTable OBJECT-TYPE SYNTAX SEQUENCE OF CwRsrcPartIlmiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the ILMI configuration table. If the interface supports ILMI, the agent will automatically create a row in this table when a row is created in cwRsrcPartConfTable. The ILMI objects will be set with default values, i.e, with ILMI signalling disabled." ::= { cwRsrcPartConfGrp 2 } cwRsrcPartIlmiEntry OBJECT-TYPE SYNTAX CwRsrcPartIlmiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "If the interface supports ILMI, the agent will automatically create an entry in this table when a resource partition is created. By default, ILMI is disabled on resource partitions. ILMI can be enabled by setting 'cwRsrcPartIlmiEnabled' to 'true'. An entry will be deleted from this table when a corresponding resource partition entry is deleted from cwRsrcPartConfTable." INDEX { ifIndex, cwRsrcPartID } ::= { cwRsrcPartIlmiTable 1} CwRsrcPartIlmiEntry ::= SEQUENCE { cwRsrcPartIlmiEnabled TruthValue, cwRsrcPartSignallingVpi INTEGER, cwRsrcPartSignallingVci INTEGER, cwRsrcPartIlmiTrapEnable TruthValue, cwRsrcPartIlmiEstablishConPollIntvl Unsigned32, cwRsrcPartIlmiCheckConPollIntvl Unsigned32, cwRsrcPartIlmiConPollInactFactor Unsigned32 } cwRsrcPartIlmiEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the value of this object to 'true', ILMI signalling is enabled on the resource partition." DEFVAL {false} ::= { cwRsrcPartIlmiEntry 1 } cwRsrcPartSignallingVpi OBJECT-TYPE SYNTAX INTEGER (0..4095 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VPI on which signalling cells arrive on this resource partition." DEFVAL { 0 } ::= { cwRsrcPartIlmiEntry 2} cwRsrcPartSignallingVci OBJECT-TYPE SYNTAX INTEGER (0..65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VCI on which signalling cells arrive on this resource partition." DEFVAL { 16 } ::= { cwRsrcPartIlmiEntry 3} cwRsrcPartIlmiTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "ILMI trap generation can be enabled or disabled using this object." ::= { cwRsrcPartIlmiEntry 4} cwRsrcPartIlmiEstablishConPollIntvl OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time S between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity." REFERENCE "ATM Forum ILMI 4.0 Section 8.3.1" DEFVAL { 1 } ::= { cwRsrcPartIlmiEntry 5 } cwRsrcPartIlmiCheckConPollIntvl OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface." REFERENCE "ATM Forum ILMI 4.0 Section 8.3.1" DEFVAL { 5 } ::= { cwRsrcPartIlmiEntry 6 } cwRsrcPartIlmiConPollInactFactor OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost." REFERENCE "ATM Forum ILMI 4.0 Section 8.3.1" DEFVAL { 4 } ::= { cwRsrcPartIlmiEntry 7 } -- ---------------------------------------------------------------------- -- cwRsrcPartCtlrConf Table -- ---------------------------------------------------------------------- cwRsrcPartCtlrConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CwRsrcPartCtlrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring additional controllers to manage a resource partition." ::= { cwRsrcPartConfGrp 3 } cwRsrcPartCtlrConfEntry OBJECT-TYPE SYNTAX CwRsrcPartCtlrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for additional controllers to control an existing resource partition. The resource partition, identified by indices ifIndex and cwRsrcPartID, must exist in the cwRsrcPartConfTable. An entry from this table is deleted if the cwRsrcPartID associated entry from cwRsrcPartConfTable is deleted." INDEX { ifIndex, cwRsrcPartID, cwRsrcPartCtlrController} ::= { cwRsrcPartCtlrConfTable 1 } CwRsrcPartCtlrConfEntry ::= SEQUENCE { cwRsrcPartCtlrController Unsigned32, cwRsrcPartCtlrRowStatus RowStatus } cwRsrcPartCtlrController OBJECT-TYPE SYNTAX Unsigned32 (1.. 255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is controller identifier. One resource partition can be controlled by multiple controllers.User may want to do this to configure redundant controllers." ::= { cwRsrcPartCtlrConfEntry 1} cwRsrcPartCtlrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to create a row in the cwRsrcPartCtlrConfTable. A redundant controller is added by setting this object to createAndGo(4). Row may be deleted by setting this object to destroy(6)." ::= { cwRsrcPartCtlrConfEntry 2} -- --------------------------------------------------------------------- -- -- SVC Aggregate Table -- -- --------------------------------------------------------------------- cwRsrcSvcAggregateTable OBJECT-TYPE SYNTAX SEQUENCE OF CwRsrcSvcAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring an SVC aggregate resource within a resource partition. This provides aggregate bandwidth and VPI range within a resource partition that CAC (Call Admission Control) can dynamically allocate the required resource from it to establish a SVC connection for the incoming call. The allocated bandwidth will become available in the SVC aggregate when the call is torn down. When the required bandwidth of an incoming call exceeds the bandwidth available for SVC connection, the CAC will fail the establishment of the new call." ::= { cwRsrcSvcAggrGrp 1 } cwRsrcSvcAggregateEntry OBJECT-TYPE SYNTAX CwRsrcSvcAggregateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of SVC Aggregate. An SVC Aggregate is used to reserve certain bandwidth in the resource partition to be dedicated for call set-up." INDEX { ifIndex, cwRsrcPartID } ::= { cwRsrcSvcAggregateTable 1 } CwRsrcSvcAggregateEntry ::= SEQUENCE { cwRsrcSvcAggrVpiLow Unsigned32, cwRsrcSvcAggrVpiHigh Unsigned32, cwRsrcSvcAggrEgrPctBw Integer32, cwRsrcSvcAggrIngPctBw Integer32, cwRsrcSvcAggrChanVADTolerance Integer32, cwRsrcSvcAggrChanVADDutyCycle Integer32, cwRsrcSvcAggrRowStatus RowStatus } cwRsrcSvcAggrVpiLow OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The low end of the VPI range for this SVC aggregate. This value has to be greater than or equal to the value of cwRsrcPartVpiLo of the containing resource partition. SVC connection provisioned on this SVC aggregate must have a VPI greater than or equal to this value." ::= { cwRsrcSvcAggregateEntry 1} cwRsrcSvcAggrVpiHigh OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The high end of the VPI range for this SVC aggregate. This value has to be less than or equal to the value of cwRsrcPartVpiHigh of the containing resource partition. SVC connection provisioned on this SVC aggregate must have a VPI less than or equal to this value. If cwRsrcSvcAggrVpiLow and cwRsrcSvcAggrVpiHigh are equal, then only one VSI is allocated for this SVC aggregate." ::= { cwRsrcSvcAggregateEntry 2} cwRsrcSvcAggrEgrPctBw OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the percentage egress bandwidth that is used by SVC connections within the resource partition. The total egress bandwidth will be used by SVC connections within the resource partition is determined by multiplying the value of this object and cwRsrcPartEgrGuarPctBwConf and port speed (ifSpeed). Total egress bandwidth available to SVCs = ifSpeed * cwRsrcPartEgrGuarPctBwConf * cwRsrcSvcAggrEgrPctBw Note that the total egress bandwidth for all PVC connections on the resource partition plus the egress bandwidth of SVC aggregate can't be greater than the maximum egress bandwidth (cwRsrcPartEgrMaxPctBwConf) of the containing resource partition." ::= { cwRsrcSvcAggregateEntry 3} cwRsrcSvcAggrIngPctBw OBJECT-TYPE SYNTAX Integer32 (1..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the percentage ingress bandwidth that is used by SVC connections within the resource partition. The total ingress bandwidth will be used by SVC connections within the resource partition is determined by multiplying the value of this object and cwRsrcPartIngGuarPctBwConf and port speed (ifSpeed). Total ingress bandwidth available to SVCs = ifSpeed * cwRsrcPartIngGuarPctBwConf * cwRsrcSvcAggrIngPctBw Note that the total ingress bandwidth for all PVC connections on the resource partition plus the ingress bandwidth of SVC aggregate can't be greater than the maximum ingress bandwidth (cwRsrcPartIngMaxPctBwConf) of the containing resource partition." ::= { cwRsrcSvcAggregateEntry 4} cwRsrcSvcAggrChanVADTolerance OBJECT-TYPE SYNTAX Integer32(1..10000) UNITS "0.0001" MAX-ACCESS read-create STATUS current DESCRIPTION "The value in this object refers to the customer accepted drop rate for voice connections when the bandwidth usage exceeds allowed value. The actual range of this object is 0.0001(or 0.01%) to 1.00(or 100%). However, when the underlying CAC(Connection Admission Control) module is notified of the change in this object, then the value has to be divided by a factor of 10000." DEFVAL { 100 } ::= { cwRsrcSvcAggregateEntry 5} cwRsrcSvcAggrChanVADDutyCycle OBJECT-TYPE SYNTAX Integer32(1..99) UNITS "0.01" MAX-ACCESS read-create STATUS current DESCRIPTION "This object refers to the talk-spurts duty cycle. The actual range of this object is 0.01(or 1%) to 0.99(or 99%). When the value of this object is to be passed to underlying CAC module this value has to be divided by 100." DEFVAL {61} ::= { cwRsrcSvcAggregateEntry 6} cwRsrcSvcAggrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "When an entry of the table is created, the following objects are mandatory: cwRsrcSvcAggrVpiLow cwRsrcSvcAggrVpiHigh cwRsrcSvcAggrEgrPctBw cwRsrcSvcAggrIngPctBw " ::= { cwRsrcSvcAggregateEntry 7} -- --------------------------------------------------------------------- -- conformance information -- --------------------------------------------------------------------- cwRsrcPartMIBConformance OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIB 3} cwRsrcPartMIBCompliances OBJECT IDENTIFIER ::= {cwRsrcPartMIBConformance 1} cwRsrcPartMIBGroups OBJECT IDENTIFIER ::= {cwRsrcPartMIBConformance 2} cwRsrcPartMIBCompliance MODULE-COMPLIANCE STATUS deprecated -- superseded by cwRsrcPartMIBComplianceRev1 DESCRIPTION "The Compliance statement for Resource partition management group." MODULE -- this module MANDATORY-GROUPS { cwRsrcPartMIBGroup } GROUP cwRsrcPartIlmiMIBGroup DESCRIPTION "Implementation of this group is not mandatory for the switches which does not support ILMI(Integrated Local Management Interface)." GROUP cwRsrcPartMappingGroup DESCRIPTION "Implementation of this group is not mandatory for the switches which do not support redundant controllers." ::= {cwRsrcPartMIBCompliances 1} cwRsrcPartMIBComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The Compliance statement for Resource partition management group." MODULE -- this module MANDATORY-GROUPS { cwRsrcPartMIBGroup } GROUP cwRsrcPartIlmiMIBGroup DESCRIPTION "Implementation of this group is not mandatory for the switches which does not support ILMI(Integrated Local Management Interface)." GROUP cwRsrcPartMappingGroup DESCRIPTION "Implementation of this group is not mandatory for the switches which do not support redundant controllers." GROUP cwRsrcSvcAggrGroup DESCRIPTION "Implementation of this group is not mandatory for the switches which does not support SVC aggregate." ::= {cwRsrcPartMIBCompliances 2} -- units of conformance cwRsrcPartMIBGroup OBJECT-GROUP OBJECTS { cwRsrcPartController, cwRsrcPartEgrGuarPctBwConf, cwRsrcPartEgrMaxPctBwConf, cwRsrcPartIngGuarPctBwConf, cwRsrcPartIngMaxPctBwConf, cwRsrcPartEgrPctBwAvail, cwRsrcPartIngPctBwAvail, cwRsrcPartEgrPctBwUsed, cwRsrcPartIngPctBwUsed, cwRsrcPartVpiLo, cwRsrcPartVpiHigh, cwRsrcPartVciLo, cwRsrcPartVciHigh, cwRsrcPartGuarCon, cwRsrcPartMaxCon, cwRsrcPartUsedCon, cwRsrcPartAvailCon, cwRsrcPartRowStatus } STATUS current DESCRIPTION "These are objects related to Resource partition group." ::= { cwRsrcPartMIBGroups 1} cwRsrcPartIlmiMIBGroup OBJECT-GROUP OBJECTS { cwRsrcPartIlmiEnabled, cwRsrcPartSignallingVpi, cwRsrcPartSignallingVci, cwRsrcPartIlmiTrapEnable, cwRsrcPartIlmiEstablishConPollIntvl, cwRsrcPartIlmiCheckConPollIntvl, cwRsrcPartIlmiConPollInactFactor } STATUS current DESCRIPTION "These are objects related to Ilmi configuration on a Resource partition." ::= { cwRsrcPartMIBGroups 2} cwRsrcPartMappingGroup OBJECT-GROUP OBJECTS { cwRsrcPartCtlrRowStatus } STATUS current DESCRIPTION "These are objects used to configure redundant controllers for resource partitions." ::= { cwRsrcPartMIBGroups 3} cwRsrcSvcAggrGroup OBJECT-GROUP OBJECTS { cwRsrcSvcAggrVpiLow, cwRsrcSvcAggrVpiHigh, cwRsrcSvcAggrEgrPctBw, cwRsrcSvcAggrIngPctBw, cwRsrcSvcAggrChanVADTolerance, cwRsrcSvcAggrChanVADDutyCycle, cwRsrcSvcAggrRowStatus } STATUS current DESCRIPTION "These are objects used to configure SVC aggregate within resource partitions." ::= { cwRsrcPartMIBGroups 4} END