-- ***************************************************************** -- ciscoWanFrRsrcPartMIB -- -- September 2002, Subra Hegde -- -- Copyright (c) 2002 by cisco Systems, Inc. -- All rights reserved. -- **************************************************************** CISCO-WAN-FR-RSRC-PART-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF frPortCnfResPartGrp FROM BASIS-MIB ciscoWan FROM CISCOWAN-SMI; ciscoWanFrRsrcPartMIB MODULE-IDENTITY LAST-UPDATED "200209040000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The MIB module to configure the resource partition on Frame Relay Ports. Terminlogies used: LCN : Logical Connection Number. DLCI : Data Link Connection Identifier. A unique number assigned to a PVC endpoint in a frame relay network. This identifies a particular PVC endpoint within a user's access channel in a frame relay network and has local significance only to that channel." REVISION "200209040000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB. Also the descriptions of some of the objects have been modified." ::= { ciscoWan 45 } -- *********************************************************************** -- -- -- LOGICAL PORT CONFIG Resource Partition Group -- -- -- *********************************************************************** frPortCnfResPartGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrPortCnfResPartGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring resource partition parameters. A resource partition is configured on frame relay port. The frame relay port if available in ifTable is identified by ifType values frameRelayService(44) and frForward(158)." ::= {frPortCnfResPartGrp 1} frPortCnfResPartGrpEntry OBJECT-TYPE SYNTAX FrPortCnfResPartGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a resource partition. A resource partition has to be created before connections can be added on a frame relay port." INDEX { frResPartPortNum, frResPartCtrlrNum } ::= { frPortCnfResPartGrpTable 1 } FrPortCnfResPartGrpEntry ::= SEQUENCE { frResPartPortNum Integer32, frResPartCtrlrNum INTEGER, frResPartRowStatus INTEGER, frResPartNumOfLcnAvail Integer32, frResPartDlciLow Integer32, frResPartDlciHigh Integer32, frResPartIngrPctBW Integer32, frResPartEgrPctBW Integer32, frResPartCtrlrID Integer32 } frResPartPortNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. If frame relay port is available in ifTable, then the value of this object must be same as the ifIndex value of frame relay ports with ifType frameRelayService(44) and frForward(158)." REFERENCE "portNum object in CISCO-WAN-FR-PORT-MIB.my" ::= { frPortCnfResPartGrpEntry 1 } frResPartCtrlrNum OBJECT-TYPE SYNTAX INTEGER { par (1), pnni(2), tag (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This value is applicable in Release 1.x. pnni(2): PNNI Controller. : This value is applicable in Release 2.x. tag(3) : MPLS(Formerly known as Tag Switch)Controller " ::= { frPortCnfResPartGrpEntry 2 } frResPartRowStatus OBJECT-TYPE SYNTAX INTEGER { add (1), del (2), mod (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for adding/deleting/modifying resource partition on a frame relay port. In MGX Release 1.x: To add an entry, this object should be set to add, value for other objects should not be specified. FRSM will choose default values for all other objects. In MGX Release 2.x: To add an entry, this object should be set to add, value for frResPartCtrlrID may be specified. FRSM will choose default values for all other objects. To delete an entry, this object has to be set to del. Currently the value mod is not supported. The resource partition can be deleted only after deleting all the connections (LCNs)." ::= { frPortCnfResPartGrpEntry 3 } frResPartNumOfLcnAvail OBJECT-TYPE SYNTAX Integer32 (0..16000) MAX-ACCESS read-write STATUS current DESCRIPTION " This represents number of LCNs available for this controller and this port. FRSM VHS 2CT3 can support LCNs upto 4000. FRSM12 can support LCNs upto 16000. " ::= { frPortCnfResPartGrpEntry 4 } frResPartDlciLow OBJECT-TYPE SYNTAX Integer32 (0..8388607) MAX-ACCESS read-write STATUS current DESCRIPTION "This represents low end of reserved DLCI." ::= { frPortCnfResPartGrpEntry 5 } frResPartDlciHigh OBJECT-TYPE SYNTAX Integer32 (0..8388607) MAX-ACCESS read-write STATUS current DESCRIPTION "This represents high end of reserved DLCI." ::= { frPortCnfResPartGrpEntry 6 } frResPartIngrPctBW OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percentage" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of total ingress bandwidth reserved." ::= { frPortCnfResPartGrpEntry 7 } frResPartEgrPctBW OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percentage" MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage of total egress bandwidth reserved." ::= { frPortCnfResPartGrpEntry 8 } frResPartCtrlrID OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the controller identifier for the resource patition. The default value is set for PNNI controller. Refer object frResPartCtrlrNum." DEFVAL { 2 } ::= { frPortCnfResPartGrpEntry 9 } -- conformance information cwfRsrcPartMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrRsrcPartMIB 2 } cwfRsrcPartMIBCompliances OBJECT IDENTIFIER ::= { cwfRsrcPartMIBConformance 1 } cwfRsrcPartMIBGroups OBJECT IDENTIFIER ::= { cwfRsrcPartMIBConformance 2 } -- compliance statements ciscoWanFrRsrcPartCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Frame Relay Resource Partition MIB." MODULE -- this module MANDATORY-GROUPS { ciscoWanFrRsrcPartGroup } ::= { cwfRsrcPartMIBCompliances 1 } ciscoWanFrRsrcPartGroup OBJECT-GROUP OBJECTS { frResPartPortNum, frResPartCtrlrNum, frResPartRowStatus, frResPartNumOfLcnAvail, frResPartDlciLow, frResPartDlciHigh, frResPartIngrPctBW, frResPartEgrPctBW, frResPartCtrlrID } STATUS current DESCRIPTION "A collection of objects providing the Frame Relay Port resource partition configuration information." ::= { cwfRsrcPartMIBGroups 1 } END