-- ***************************************************************** -- ciscoWanFrConnStatMIB -- -- October 2002, Subra.Hegde -- -- Copyright (c) 2002 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-WAN-FR-CONN-STAT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF frChan FROM BASIS-MIB ciscoWan FROM CISCOWAN-SMI; ciscoWanFrConnStatMIB MODULE-IDENTITY LAST-UPDATED "200210180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The MIB module for frame relay connection statistics. Terminologies Used: SIW - Frame-Relay-to ATM Service Interworking FECN - Forward Explicit Congestion Notification. The FECN bit in Frame Relay header communicate network congestion to the endpoint in the forward direction. BECN - Backward Explicit Congestion Notification. The BECN bit in Frame Relay header communicate network congestion to the endpoint in the backward direction. DE - Discard Eligibility. The DE bit in Frame Relay header communicates the loss priority. A marked frame with a DE bit value of 1 is considered less important than other frames in transmission and should be discarded before frames with a DE bit value of zero. Tagged - Some of the statistics objects described in this MIB are applicable where the information is Set by the Switch/Service-Module. These objects contain word 'Tagged' in the name. For example : 'rcvFramesTaggedFECN'; This is the counter where FECN is set by the Switch in the frame received from the network. FECN was not set in the frame from the Network. The bit Set by the switch on an incoming or outgoing frame is called 'tagged' in this mib." REVISION "200210180000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB." ::= { ciscoWan 48 } frChanCntGrp OBJECT IDENTIFIER ::= { frChan 3 } frChanCntGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrChanCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on statistics for Frame Relay Connections." ::= { frChanCntGrp 1 } frChanCntGrpEntry OBJECT-TYPE SYNTAX FrChanCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the statistical information for Frame Relay connections." INDEX { cntChanNum } ::= { frChanCntGrpTable 1} FrChanCntGrpEntry ::= SEQUENCE { cntChanNum Integer32, rcvFrames Counter32, rcvBytes Counter32, rcvFramesDE Counter32, rcvBytesDE Counter32, rcvFramesDiscard Counter32, rcvBytesDiscard Counter32, rcvFramesDiscShelfAlarm Counter32, rcvFramesDiscXceedQDepth Counter32, rcvBytesDiscXceedQDepth Counter32, rcvFramesDiscXceedDEThresh Counter32, rcvFramesFECN Counter32, rcvFramesBECN Counter32, rcvFramesTaggedFECN Counter32, rcvFramesTaggedBECN Counter32, rcvFramesTaggedDE Counter32, rcvBytesTaggedDE Counter32, rcvKbpsAIR Integer32, xmtFrames Counter32, xmtBytes Counter32, xmtFramesFECN Counter32, xmtFramesBECN Counter32, xmtFramesDE Counter32, xmtBytesDE Counter32, xmtFramesDiscard Counter32, xmtBytesDiscard Counter32, xmtFramesDiscXceedQDepth Counter32, xmtBytesDiscXceedQDepth Counter32, xmtFramesDiscXceedDEThresh Counter32, xmtFramesDiscPhyLayerFail Counter32, xmtFramesDiscCRCError Counter32, xmtFramesDiscReassmFail Counter32, xmtFramesDiscSrcAbort Counter32, xmtFramesDuringLMIAlarm Counter32, xmtBytesDuringLMIAlarm Counter32, xmtFramesTaggedFECN Counter32, xmtFramesTaggedBECN Counter32, xmtKbpsAIR Integer32, chanClrButton INTEGER, chanSecUpTime Counter32, rcvFramesDiscUPC Counter32, xmtBytesTaggedDE Counter32, xmtFramesTaggedDE Counter32, xmtFramesInvalidCPIs Counter32, xmtFramesLengthViolations Counter32, xmtFramesOversizedSDUs Counter32, xmtFramesUnknownProtocols Counter32, rcvFramesUnknownProtocols Counter32, xmtBytesDEDiscard Counter32, rcvBytesDEDiscard Counter32 } cntChanNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object refers to refers to the virtual connection/channel index. The value for this object must be same as the value of 'chanNum' from frChanCnfGrpTable." REFERENCE "chanNum object in CISCO-WAN-FR-CONN-MIB." ::= { frChanCntGrpEntry 1} rcvFrames OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames Received by the network (ingress) for this PVC end-point." ::= { frChanCntGrpEntry 2 } rcvBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes Received by the network (ingress) for this PVC end-point." ::= { frChanCntGrpEntry 3 } rcvFramesDE OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received by the network(ingress) with the DE bit set to (1) for this frame relay connection." ::= { frChanCntGrpEntry 4 } rcvBytesDE OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received by the network(ingress) with the DE bit set to (1) for this frame relay connection." ::= { frChanCntGrpEntry 5 } rcvFramesDiscard OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received by the network(ingress) that were discarded due to traffic enforcement for this frame relay connection." ::= { frChanCntGrpEntry 6 } rcvBytesDiscard OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received by the network(ingress) that were discarded due to traffic enforcement for this frame relay connection." ::= { frChanCntGrpEntry 7 } rcvFramesDiscShelfAlarm OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to shelf alarm For FRSM12 Card: Not Supported." ::= { frChanCntGrpEntry 8 } rcvFramesDiscXceedQDepth OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to exceeded queue depth." ::= { frChanCntGrpEntry 9 } rcvBytesDiscXceedQDepth OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes discarded on the ingress due to exceeded queue depth." ::= { frChanCntGrpEntry 10 } rcvFramesDiscXceedDEThresh OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to exceeded DE Threshold." ::= { frChanCntGrpEntry 11 } rcvFramesFECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received by the network(ingress) that have the FECN bit set for this frame relay connection." ::= { frChanCntGrpEntry 12 } rcvFramesBECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received by the network(ingress) that have the BECN bit set for this frame relay connection." ::= { frChanCntGrpEntry 13 } rcvFramesTaggedFECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received for which the the switch set(tagged) the FECN bit." ::= { frChanCntGrpEntry 14 } rcvFramesTaggedBECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received for which the switch set(tagged) the BECN bit." ::= { frChanCntGrpEntry 15 } rcvFramesTaggedDE OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received for which the switch set(tagged) the DE bit." ::= { frChanCntGrpEntry 16 } rcvBytesTaggedDE OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received for which the switch set the DE bit." ::= { frChanCntGrpEntry 17 } rcvKbpsAIR OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Received Average Information Rate in KBPS." ::= { frChanCntGrpEntry 18 } xmtFrames OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames sent by the network(egress)." ::= { frChanCntGrpEntry 19 } xmtBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes sent by the network(egress)." ::= { frChanCntGrpEntry 20 } xmtFramesFECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames sent by the network(egress) that have the FECN bit set for this frame relay connection." ::= { frChanCntGrpEntry 21 } xmtFramesBECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames sent by the network(egress) that have the BECN bit set for this frame relay connection." ::= { frChanCntGrpEntry 22 } xmtFramesDE OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames sent by the network(egress) with the DE bit set to (1) for this frame relay connection." ::= { frChanCntGrpEntry 23 } xmtBytesDE OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames sent by the network(egress) with the DE bit set to (1) for this frame relay connection." ::= { frChanCntGrpEntry 24 } xmtFramesDiscard OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames sent by the network(egress) that were discarded due to traffic enforcement for this frame relay connection." ::= { frChanCntGrpEntry 25 } xmtBytesDiscard OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes discarded on the egress For FRSM12 Card: Not Supported " ::= { frChanCntGrpEntry 26 } xmtFramesDiscXceedQDepth OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the egress due to exceeded queue depth For FRSM12 Card: Not Supported." ::= { frChanCntGrpEntry 27 } xmtBytesDiscXceedQDepth OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes discarded on the egress due to exceeded queue depth For FRSM12 Card: Not Supported." ::= { frChanCntGrpEntry 28 } xmtFramesDiscXceedDEThresh OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the egress due to exceeded DE Threshold For FRSM12 Card: Not Supported " ::= { frChanCntGrpEntry 29 } xmtFramesDiscPhyLayerFail OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the egress due to physical layer failure." ::= { frChanCntGrpEntry 30 } xmtFramesDiscCRCError OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the egress due to CRC Error." ::= { frChanCntGrpEntry 31 } xmtFramesDiscReassmFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the egress due to reassembly failure For FRSM12 Card: Not Supported." ::= { frChanCntGrpEntry 32 } xmtFramesDiscSrcAbort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the egress due to source abort." ::= { frChanCntGrpEntry 33 } xmtFramesDuringLMIAlarm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted during LMI logical port alarm " ::= { frChanCntGrpEntry 34 } xmtBytesDuringLMIAlarm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted during LMI logical port alarm." ::= { frChanCntGrpEntry 35 } xmtFramesTaggedFECN OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted for which the switch set the FECN bit." ::= { frChanCntGrpEntry 36 } xmtFramesTaggedBECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted for which the switch set the BECN bit." ::= { frChanCntGrpEntry 37 } xmtKbpsAIR OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Transmitted Average Information Rate in KBPS." ::= { frChanCntGrpEntry 38 } chanClrButton OBJECT-TYPE SYNTAX INTEGER { noaction (1), clear (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Channel clear button. Clears Channel Counters." ::= { frChanCntGrpEntry 39 } xmtFramesTaggedDE OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted which have been DE tagged at the far end ingress in excess of CIR." ::= { frChanCntGrpEntry 40 } xmtBytesTaggedDE OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted which have been DE tagged at the far end ingress in excess of CIR." ::= { frChanCntGrpEntry 41 } rcvFramesDiscUPC OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded at ingress due to the UPC measurement in excess of CIR+EIR." ::= { frChanCntGrpEntry 42 } chanSecUpTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds the PVC stay in service." ::= { frChanCntGrpEntry 43 } xmtFramesInvalidCPIs OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames transmitted with invalid CPI header. currently valid is 0." ::= { frChanCntGrpEntry 44 } xmtFramesLengthViolations OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded due to violation of length in the egress direction." ::= { frChanCntGrpEntry 45 } xmtFramesOversizedSDUs OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded because the size is beyond the max in the egress direction." ::= { frChanCntGrpEntry 46 } xmtFramesUnknownProtocols OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded for Unknown protocol in the egress direction. Used only in SIW for PDUs that are dropped." ::= { frChanCntGrpEntry 47 } rcvFramesUnknownProtocols OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames discarded for Unknown protocol in the ingress direction. Used only in SIW for PDUs that are dropped." ::= { frChanCntGrpEntry 48 } xmtBytesDEDiscard OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes discarded in the egress direction by the channel due to exceeded DE Threshold." ::= { frChanCntGrpEntry 49 } rcvBytesDEDiscard OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes discarded in the ingress direction by the channel due to exceeded DE Threshold." ::= { frChanCntGrpEntry 50 } -- ********************************************************************* -- -- frstdABRCounters group -- Channel OR VC COUNTERS -- -- ********************************************************************* frstdABRCntGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrstdABRCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on statistics for Frame Relay Connections. This is applicable for ABR Frame Relay connections only." ::= { frChanCntGrp 2 } frstdABRCntGrpEntry OBJECT-TYPE SYNTAX FrstdABRCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the statistical information for Frame Relay connections." INDEX { frstdABRcntChanNum } ::= { frstdABRCntGrpTable 1} FrstdABRCntGrpEntry ::= SEQUENCE { frstdABRcntChanNum Integer32, frChanFrmXmtToNetworkCnt Counter32, frChanBrmXmtToNetworkCnt Counter32, frChanCrcErrRmRcvFromNetworkCnt Counter32, frChanFrmRcvFromNetworkCnt Counter32, frChanBrmRcvFromNetworkCnt Counter32, frChanFrmNotTurnedAroundCnt Counter32 } frstdABRcntChanNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object refers to the frame relay connection/channel index. The value for this object must be same as the value of object 'chanNum' from frChanCnfGrpTable." REFERENCE "chanNum object in CISCO-WAN-FR-CONN-MIB." ::= { frstdABRCntGrpEntry 1} frChanFrmXmtToNetworkCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Forward RM cells transmitted to the network." ::= { frstdABRCntGrpEntry 2 } frChanBrmXmtToNetworkCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Backward RM cells transmitted to the network." ::= { frstdABRCntGrpEntry 3 } frChanCrcErrRmRcvFromNetworkCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RM cells received from the network with incorrect CRC-10." ::= { frstdABRCntGrpEntry 4 } frChanFrmRcvFromNetworkCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Forward RM cells received from the network." ::= { frstdABRCntGrpEntry 5 } frChanBrmRcvFromNetworkCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Backward RM cells received from the network." ::= { frstdABRCntGrpEntry 6 } frChanFrmNotTurnedAroundCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Forward RM cells received from the network and not turned around." ::= { frstdABRCntGrpEntry 7 } -- conformance information cwfConnStatMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrConnStatMIB 2 } cwfConnStatMIBGroups OBJECT IDENTIFIER ::= { cwfConnStatMIBConformance 1 } cwfConnStatMIBCompliances OBJECT IDENTIFIER ::= { cwfConnStatMIBConformance 2 } -- compliance statements ciscoWanFrConnStatCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Frame Relay Connection Statstics MIB." MODULE -- this module MANDATORY-GROUPS { ciscoWanFrConnStatsGroup } GROUP ciscoWanFrConnABRStatsGroup DESCRIPTION "This group is mandatory for Frame Relay modules supporting ABR connections." GROUP ciscoWanFrConnQueueStatsGroup DESCRIPTION "This group is mandatory for Frame Relay modules supporting connections providing queue depth and DE threshold related statistics." ::= { cwfConnStatMIBCompliances 1 } ciscoWanFrConnStatsGroup OBJECT-GROUP OBJECTS { cntChanNum, rcvFrames, rcvBytes, rcvFramesDE, rcvBytesDE, rcvFramesDiscard, rcvBytesDiscard, rcvFramesDiscShelfAlarm , rcvFramesFECN, rcvFramesBECN, rcvFramesTaggedFECN, rcvFramesTaggedBECN, rcvFramesTaggedDE, rcvBytesTaggedDE, rcvKbpsAIR, xmtFrames, xmtBytes, xmtFramesFECN, xmtFramesBECN, xmtFramesDE, xmtBytesDE, xmtFramesDiscard, xmtBytesDiscard, xmtFramesDiscPhyLayerFail, xmtFramesDiscCRCError, xmtFramesDiscReassmFail, xmtFramesDiscSrcAbort, xmtFramesDuringLMIAlarm, xmtBytesDuringLMIAlarm, xmtFramesTaggedFECN, xmtFramesTaggedBECN, xmtKbpsAIR, chanClrButton, chanSecUpTime, rcvFramesDiscUPC, xmtBytesTaggedDE, xmtFramesTaggedDE, xmtFramesInvalidCPIs, xmtFramesLengthViolations, xmtFramesOversizedSDUs, xmtFramesUnknownProtocols, rcvFramesUnknownProtocols, xmtBytesDEDiscard, rcvBytesDEDiscard } STATUS current DESCRIPTION "The objects related to Frame Relay connection statistics." ::= { cwfConnStatMIBGroups 1 } ciscoWanFrConnQueueStatsGroup OBJECT-GROUP OBJECTS { rcvFramesDiscXceedQDepth, rcvBytesDiscXceedQDepth, rcvFramesDiscXceedDEThresh, xmtFramesDiscXceedQDepth, xmtBytesDiscXceedQDepth, xmtFramesDiscXceedDEThresh } STATUS current DESCRIPTION "The objects related to Queue depth and threshold related statistics for Frame Relay connections." ::= { cwfConnStatMIBGroups 2 } ciscoWanFrConnABRStatsGroup OBJECT-GROUP OBJECTS { frstdABRcntChanNum, frChanFrmXmtToNetworkCnt, frChanBrmXmtToNetworkCnt, frChanCrcErrRmRcvFromNetworkCnt, frChanFrmRcvFromNetworkCnt, frChanBrmRcvFromNetworkCnt, frChanFrmNotTurnedAroundCnt } STATUS current DESCRIPTION "The objects related to ABR statistics on frame relay connections." ::= { cwfConnStatMIBGroups 3 } END