-- ***************************************************************** -- CISCO-WAN-BBIF-ATM-CONN-STAT-MIB -- Broadband Interface Connection Statistics MIB for MGX82xx -- products. -- -- October 2002, Subra Hegde -- -- Copyright (c) 2002 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-WAN-BBIF-ATM-CONN-STAT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF bbChanCntGrp FROM BASIS-MIB ciscoWan FROM CISCOWAN-SMI; ciscoWanBbifAtmConnStatMIB MODULE-IDENTITY LAST-UPDATED "200210180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "This MIB module contains ATM Connection related real time statistical counter objects. The ATM connections are applicable to PXM1 service module. in MGX82xx products. Logical Channel refers to ATM Connection(or connection end point). Terminologies used: broadband interface - Logical port on PXM1. SCR - Sustained Cell Rate BT - Burst Tolerance PCR - Peak Cell Rate CDVT - Cell Delay Transfer Variance Tolerance GCRA - The Generic Cell Rate Algorithm(GCRA) is used to define comformance with repect to the traffic contract. For each cell arrival, the GCRA determines whether the cell conforms to the traffic contract of the connection. GCRA1 - GCRA Bucket 1. For CBR and UBR connections, only GCRA-1 is needed to check for PCR, CDVT Conformance. GCRA2 - GCRA Bucket 2. For VBR and ABR Connections, GCRA-1 is needed to check for PCR, CDVT conformance and GCRA-2 for SCR, BT Conformance. EFCI - Explicit Forward Congestion Indication. QE - Queue Engine(QE). This ASIC Provides the traffic management functions related to VC queues, QoS queues and interface queues. This management function is performed for both directions of traffic(ingress, egress). ingress - ingress traffic is defined as data flowing toward the switch fabric. Ingress data can come from either the Service Modules through the backplane or the PXM1 Uplink back card. egress - Egress traffic is defined as data flowing away from the switch fabric." -- REFERENCE -- "ATM Forum Traffic Management 4.0 af-tm-0056.000" REVISION "200210180000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB. Also the descriptions of some of the objects have been modified." ::= { ciscoWan 36 } -- ********************************************************************* -- -- -- BROADBAND CHANNEL COUNT Group -- -- -- ********************************************************************* bbChanCntGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF BbChanCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the broadband channel statistics table." ::= { bbChanCntGrp 1 } bbChanCntGrpEntry OBJECT-TYPE SYNTAX BbChanCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for statistics on logical channel. Each entry contains statistics for an ATM connection on broadband interface." INDEX { bbChanCntNum } ::= { bbChanCntGrpTable 1 } BbChanCntGrpEntry ::= SEQUENCE { bbChanCntNum Integer32, bbChanRcvClp0Cells Counter32, bbChanRcvClp1Cells Counter32, bbChanNonConformCellsAtGcra1Policer Counter32, bbChanNonConformCellsAtGcra2Policer Counter32, -- -- additional 4 ingress counts are from QE -- bbChanRcvEOFCells Counter32, bbChanDscdClp0Cells Counter32, bbChanDscdClp1Cells Counter32, bbChanRcvCellsSent Counter32, -- -- 4 egress counts are from QE -- -- bbChanXmtClp0Cells Counter32, bbChanXmtClp1Cells Counter32, bbChanDscdClpZeroCellsToPort Counter32, bbChanDscdClpOneCellsToPort Counter32, bbChanCntClrButton INTEGER } bbChanCntNum OBJECT-TYPE SYNTAX Integer32 (16..4111) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the logical channel number. The value for this object must be same as the value of 'bbChanCnfNum' from bbChanCnfGrpTable." REFERENCE "bbChanCnfNum is defined in CISCO-WAN-BBIF-ATM-CONN-MIB." ::= { bbChanCntGrpEntry 1 } bbChanRcvClp0Cells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "CLP_0 Cells Received from broadband interface." ::= { bbChanCntGrpEntry 2 } bbChanRcvClp1Cells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "CLP_1 Cells Received from broadband interface." ::= { bbChanCntGrpEntry 3 } bbChanNonConformCellsAtGcra1Policer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a count of the nonconforming cells that are received at the first policing point(GCRA1 policer)." ::= { bbChanCntGrpEntry 4 } bbChanNonConformCellsAtGcra2Policer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a count of the nonconforming cells that are received at the second policing point(GCRA2 policer)." ::= { bbChanCntGrpEntry 5 } bbChanRcvEOFCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides count of End Of Frame(EOF) cells that are received." ::= { bbChanCntGrpEntry 6 } bbChanDscdClp0Cells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a count of the CLP equal to 0 that are received and then discarded." ::= { bbChanCntGrpEntry 7 } bbChanDscdClp1Cells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a count of the CLP equal to 1 that are received and then discarded." ::= { bbChanCntGrpEntry 8 } bbChanRcvCellsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cells received from broadband interface and sent out of the Queue Engine(QE device)." ::= { bbChanCntGrpEntry 9 } bbChanXmtClp0Cells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides count of Number of cells with EFCI=0 that are transmitted." ::= { bbChanCntGrpEntry 10 } bbChanXmtClp1Cells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides count of Number of cells with EFCI set that are transmitted." ::= { bbChanCntGrpEntry 11 } bbChanDscdClpZeroCellsToPort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CLP = 0 cells discarded before transmitted to broadband interface." ::= { bbChanCntGrpEntry 12 } bbChanDscdClpOneCellsToPort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CLP = 1 cells discarded before transmitted to broadband interface." ::= { bbChanCntGrpEntry 13 } bbChanCntClrButton OBJECT-TYPE SYNTAX INTEGER { noAction (1), resetCounters (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Writing a value of 2 resets all the counters." ::= { bbChanCntGrpEntry 14 } -- conformance information cwbAtmConnStatMIBConformance OBJECT IDENTIFIER ::= { ciscoWanBbifAtmConnStatMIB 2 } cwbAtmConnStatMIBGroups OBJECT IDENTIFIER ::= { cwbAtmConnStatMIBConformance 1 } cwbAtmConnStatMIBCompliances OBJECT IDENTIFIER ::= { cwbAtmConnStatMIBConformance 2 } -- compliance statements cwbAtmConnStatCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for broadband interface Connection Statstics MIB." MODULE -- this module MANDATORY-GROUPS { cwbAtmConnStatsGroup } ::= { cwbAtmConnStatMIBCompliances 1 } cwbAtmConnStatsGroup OBJECT-GROUP OBJECTS { bbChanCntNum, bbChanRcvClp0Cells, bbChanRcvClp1Cells, bbChanNonConformCellsAtGcra1Policer, bbChanNonConformCellsAtGcra2Policer, bbChanRcvEOFCells, bbChanDscdClp0Cells, bbChanDscdClp1Cells, bbChanRcvCellsSent, bbChanXmtClp0Cells, bbChanXmtClp1Cells, bbChanDscdClpZeroCellsToPort, bbChanDscdClpOneCellsToPort, bbChanCntClrButton } STATUS current DESCRIPTION "The objects related to broadband interface connection statistics." ::= { cwbAtmConnStatMIBGroups 1 } END