-- ***************************************************************** -- CISCO-VLAN-MEMBERSHIP-MIB -- -- November 1998, Chin-Chai Low -- -- Copyright (c) 1998-2004, 2007 by Cisco Systems Inc. -- All rights reserved. -- ***************************************************************** CISCO-VLAN-MEMBERSHIP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF RowStatus, TruthValue FROM SNMPv2-TC ifIndex FROM IF-MIB VlanIndex FROM CISCO-VTP-MIB CiscoPortList, CiscoPortListRange FROM CISCO-TC ciscoMgmt FROM CISCO-SMI; ciscoVlanMembershipMIB MODULE-IDENTITY LAST-UPDATED "200712140000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-vlans@cisco.com" DESCRIPTION "The MIB module for the management of the VLAN Membership within the frame work of Cisco VLAN Architecture, v 2.0 by Keith McCloghrie. The MIB provides information on VLAN Membership Policy Servers used by a device and VLAN membership assignments of non-trunk bridge ports of the device." REVISION "200712140000Z" DESCRIPTION "Add vmVlanCreationGroup." REVISION "200407160000Z" DESCRIPTION "Add vmMembershipSummaryExtTable." REVISION "200404070000Z" DESCRIPTION "Change the SYNTAX of vmMembershipSummaryMember2kPorts from PortList to CiscoPortList." REVISION "200310100000Z" DESCRIPTION "Add vmVoiceVlanCdpVerifyEnable to support the feature of voice VLANs' detection through CDP packets." REVISION "200306050000Z" DESCRIPTION "Deprecate vmMembershipSummaryMemberPorts and define vmMembershipSummaryMember2kPorts to support up to 2k bridge ports." REVISION "200203280000Z" DESCRIPTION "Add vmVoiceVlanTable to support VVID feature" REVISION "200105010000Z" DESCRIPTION "Import VlanIndex from CISCO-VTP-MIB" REVISION "200101300000Z" DESCRIPTION "Corrected description of vmVmpsReconfirmResult" REVISION "200001060000Z" DESCRIPTION "Added 4k VLAN support" REVISION "9901180000Z" DESCRIPTION "Add vmNotificationsEnabled. Add support for multi-vlan ports. Other minor edits." REVISION "9612060000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 68 } ciscoVlanMembershipMIBObjects OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 1 } -- Textual Conventions vmVmps OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIBObjects 1 } vmMembership OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIBObjects 2 } vmStatistics OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIBObjects 3 } vmStatus OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIBObjects 4 } vmVoiceVlan OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIBObjects 5 } -- General Info vmVmpsVQPVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN Query Protocol (VQP) version supported on the device. VQP is the protocol used to query VLAN Membership Policy Server (VMPS) for VLAN membership assignments of dynamic VLAN ports. A VMPS provides VLAN membership policy assignments based on the content of the packets received on a port." ::= { vmVmps 1 } vmVmpsRetries OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of retries for VQP requests to a VMPS before using the next available VMPS." ::= { vmVmps 2 } vmVmpsReconfirmInterval OBJECT-TYPE SYNTAX INTEGER (0..120) UNITS "Minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The switch will reconfirm membership of addresses on each port with VMPS periodically. This object specifies the interval to perform reconfirmation. If the value is set to 0, the switch does not reconfirm membership with VMPS." DEFVAL { 60 } ::= { vmVmps 3 } vmVmpsReconfirm OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to execute(2) causes the switch to reconfirm membership of every dynamic port. Reading this object always return ready(1)." ::= { vmVmps 4 } vmVmpsReconfirmResult OBJECT-TYPE SYNTAX INTEGER { other(1), inProgress(2), success(3), noResponse(4), noVmps(5), noDynamicPort(6), noHostConnected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the result of the last request that sets vmVmpsReconfirm to execute(2). The semantics of the possible results are as follows: other(1) - none of following inProgress(2) - reconfirm in progress success(3) - reconfirm completed successfully noResponse(4) - reconfirm failed because no VMPS responded noVmps(5) - No VMPS configured noDynamicPort(6) - No dynamic ports configured noHostConnected(7) - No hosts on dynamic ports" ::= { vmVmps 5 } vmVmpsCurrent OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This is the IpAddress of the current VMPS used." ::= { vmVmps 6 } vmVmpsTable OBJECT-TYPE SYNTAX SEQUENCE OF VmVmpsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of VMPS to use. The device will use the the primary VMPS by default. If the device is unable to reach the primary server after vmVmpsRetries retries, it uses the first secondary server in the table until it runs out of secondary servers, in which case it will return to using the primary server. Entries in this table may be created and deleted via this MIB or the management console on a device." ::= { vmVmps 7 } vmVmpsEntry OBJECT-TYPE SYNTAX VmVmpsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the vmVmpsTable." INDEX { vmVmpsIpAddress } ::= { vmVmpsTable 1 } VmVmpsEntry ::= SEQUENCE { vmVmpsIpAddress IpAddress, vmVmpsPrimary TruthValue, vmVmpsRowStatus RowStatus } vmVmpsIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Ip Address of the VMPS." ::= { vmVmpsEntry 1 } vmVmpsPrimary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the VMPS. Setting this value to true will make this VMPS the primary server and make the switch use this as the current server. Setting this entry to true causes other rows to transition to false. Attempting to write a value of false after creation will result in a return of bad value. Deleting an entry whose value is true will result in the first entry in the table being set to true." ::= { vmVmpsEntry 2 } vmVmpsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { vmVmpsEntry 3 } -- VLAN Membership Info vmMembershipSummaryTable OBJECT-TYPE SYNTAX SEQUENCE OF VmMembershipSummaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A summary of VLAN membership of non-trunk bridge ports. This is a convenience table for retrieving VLAN membership information. A row is created for a VLAN if: a) the VLAN exists, or b) a port is assigned to a non-existent VLAN. VLAN membership can only be modified via the vmMembershipTable." ::= { vmMembership 1 } vmMembershipSummaryEntry OBJECT-TYPE SYNTAX VmMembershipSummaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the vmMembershipSummaryTable." INDEX { vmMembershipSummaryVlanIndex } ::= { vmMembershipSummaryTable 1 } VmMembershipSummaryEntry ::= SEQUENCE { vmMembershipSummaryVlanIndex VlanIndex, vmMembershipSummaryMemberPorts OCTET STRING, vmMembershipSummaryMember2kPorts CiscoPortList } vmMembershipSummaryVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN id of the VLAN." ::= { vmMembershipSummaryEntry 1 } vmMembershipSummaryMemberPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493)." ::= { vmMembershipSummaryEntry 2 } vmMembershipSummaryMember2kPorts OBJECT-TYPE SYNTAX CiscoPortList MAX-ACCESS read-only STATUS current DESCRIPTION "The set of the device's member ports that belong to the VLAN. It has the VLAN membership information of up to 2048 ports with the port number from 1 to 2048. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493)." ::= { vmMembershipSummaryEntry 3 } vmMembershipTable OBJECT-TYPE SYNTAX SEQUENCE OF VmMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring VLAN port membership. There is one row for each bridge port that is assigned to a static or dynamic access port. Trunk ports are not represented in this table. An entry may be created and deleted when ports are created or deleted via SNMP or the management console on a device." ::= { vmMembership 2 } vmMembershipEntry OBJECT-TYPE SYNTAX VmMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the vmMembershipTable." INDEX { ifIndex } ::= { vmMembershipTable 1 } VmMembershipEntry ::= SEQUENCE { vmVlanType INTEGER , vmVlan INTEGER, vmPortStatus INTEGER , vmVlans OCTET STRING, vmVlans2k OCTET STRING, vmVlans3k OCTET STRING, vmVlans4k OCTET STRING } vmVlanType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2), multiVlan(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of VLAN membership assigned to this port. A port with static vlan membership is assigned to a single VLAN directly. A port with dynamic membership is assigned a single VLAN based on content of packets received on the port and via VQP queries to VMPS. A port with multiVlan membership may be assigned to one or more VLANs directly. A static or dynamic port membership is specified by the value of vmVlan. A multiVlan port membership is specified by the value of vmVlans." ::= { vmMembershipEntry 1 } vmVlan OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN id of the VLAN the port is assigned to when vmVlanType is set to static or dynamic. This object is not instantiated if not applicable. The value may be 0 if the port is not assigned to a VLAN. If vmVlanType is static, the port is always assigned to a VLAN and the object may not be set to 0. If vmVlanType is dynamic the object's value is 0 if the port is currently not assigned to a VLAN. In addition, the object may be set to 0 only." ::= { vmMembershipEntry 2 } vmPortStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2), shutdown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the current VLAN status of the port. A status of inactive(1) indicates that a dynamic port does not yet have a VLAN assigned, or a port is assigned to a VLAN that is currently not active. A status of active(2) indicates that the currently assigned VLAN is active. A status of shutdown(3) indicates that the port has been disabled as a result of VQP shutdown response." ::= { vmMembershipEntry 3 } vmVlans OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 1 through 8, the second octet specifying VLAN ids 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'." ::= { vmMembershipEntry 4 } vmVlans2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 1024 through 1031, the second octet specifying VLAN ids 1032 through 1039, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'." ::= { vmMembershipEntry 5 } vmVlans3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 2048 through 2055, the second octet specifying VLAN ids 2056 through 2063, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'." ::= { vmMembershipEntry 6 } vmVlans4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 3072 through 3079, the second octet specifying VLAN ids 3040 through 3047, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'." ::= { vmMembershipEntry 7 } vmMembershipSummaryExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VmMembershipSummaryExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A summary of VLAN membership of non-trunk bridge ports. This table is used for retrieving VLAN membership information for the device which supports dot1dBasePort with value greater than 2048. A row is created for a VLAN and a particular bridge port range, where at least one port in the range is assigned to this VLAN. VLAN membership can only be modified via the vmMembershipTable." ::= { vmMembership 3 } vmMembershipSummaryExtEntry OBJECT-TYPE SYNTAX VmMembershipSummaryExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the vmMembershipSummaryExtTable." INDEX { vmMembershipSummaryVlanIndex, vmMembershipPortRangeIndex } ::= { vmMembershipSummaryExtTable 1 } VmMembershipSummaryExtEntry ::= SEQUENCE { vmMembershipPortRangeIndex CiscoPortListRange, vmMembershipSummaryExtPorts CiscoPortList } vmMembershipPortRangeIndex OBJECT-TYPE SYNTAX CiscoPortListRange MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge port range index of this row." ::= { vmMembershipSummaryExtEntry 1 } vmMembershipSummaryExtPorts OBJECT-TYPE SYNTAX CiscoPortList MAX-ACCESS read-only STATUS current DESCRIPTION "The set of the device's member ports that belong to the VLAN. It has the VLAN membership information of up to 2k ports with the port number starting from the information indicated in vmMembershipPortRangeIndex object of the same row. For example, if the value of vmMembershipPortRangeIndex is 'twoKto4K', the port number indicated in this object starting from 2049 and ending to 4096. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493)." ::= { vmMembershipSummaryExtEntry 2 } vmVlanCreationMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine whether or not a non-existing VLAN will be created automatically by the system after assigned to a port. automatic(1): a non-existing VLAN will be created automatically by the system after assigned to a port. manual(2): a non-existing VLAN will not be created automatically by the system and need to be manually created by the users after assigned to a port." ::= { vmMembership 4 } -- VQP Statistics vmVQPQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VQP requests sent by this device to all VMPS since last system re-initialization." ::= { vmStatistics 1 } vmVQPResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VQP responses received by this device from all VMPS since last system re-initialization." ::= { vmStatistics 2 } vmVmpsChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times, since last system re-initialization, the current VMPS was changed. The current VMPS is changed whenever the VMPS fails to response after vmVmpsRetries of a VQP request." ::= { vmStatistics 3 } vmVQPShutdown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times, since last system re-initialization, a VQP response indicates 'shutdown'. A 'shutdown' response is a result of the membership policy configured at a VMPS by the administrator." ::= { vmStatistics 4 } vmVQPDenied OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times, since last system re-initialization, a VQP response indicates 'denied'. A 'denied' response is a result of the membership policy configured at a VMPS by the administrator." ::= { vmStatistics 5 } vmVQPWrongDomain OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times, since last system re-initialization, a VQP response indicates wrong management domain. A wrong management domain response indicates that the VMPS used serves a management domain that is different from the device's management domain." ::= { vmStatistics 6 } vmVQPWrongVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times, since last system re-initialization, a VQP response indicates wrong VQP version. A wrong VQP version response indicates that the VMPS used supports a VQP version that is different from the device's VQP version." ::= { vmStatistics 7 } vmInsufficientResources OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times, since last system re-initialization, a VQP response indicates insufficient resources. An insufficient resources response indicates that the VMPS used does not have the required resources to verify the membership assignment requested." ::= { vmStatistics 8 } -- Status vmNotificationsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of whether the notifications/traps defined in this MIB are enabled." ::= { vmStatus 1 } -- Voice Vlan Configuration vmVoiceVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF VmVoiceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring the Voice VLAN-ID for the ports. An entry will exist for each interface which supports Voice Vlan feature." ::= { vmVoiceVlan 1 } vmVoiceVlanEntry OBJECT-TYPE SYNTAX VmVoiceVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the vmVoiceVlanTable. Only interfaces which support Voice Vlan feature are shown." INDEX { ifIndex } ::= { vmVoiceVlanTable 1 } VmVoiceVlanEntry ::= SEQUENCE { vmVoiceVlanId INTEGER, vmVoiceVlanCdpVerifyEnable TruthValue } vmVoiceVlanId OBJECT-TYPE SYNTAX INTEGER (0..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The Voice Vlan ID (VVID) to which this port belongs to. 0 - The CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with value of 0. VoIP and related packets are expected to be sent and received with VLAN-id=0 and an 802.1p priority. 1..4094 - The CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with N. VoIP and related packets are expected to be sent and received with VLAN-id=N and an 802.1p priority. 4095 - The CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with value of 4095. VoIP and related packets are expected to be sent and received untagged without an 802.1p priority. 4096 - The CDP packets transmitting through this port would not include Appliance VLAN-ID TLV; or, if the VVID is not supported on the port, this MIB object will not be configurable and will return 4096." ::= { vmVoiceVlanEntry 1 } vmVoiceVlanCdpVerifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable the feature of CDP message verification of voice VLANs. true - The voice VLAN vmVoiceVlan is enabled only after CDP messages are received from the IP phone. false - The voice VLAN vmVoiceVlan is enabled as soon as the IP phone interface is up. There is no verification needed from CDP messages from the IP phone." ::= { vmVoiceVlanEntry 2 } -- Notifications vmNotifications OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 2 } vmNotificationsPrefix OBJECT IDENTIFIER ::= { vmNotifications 0 } vmVmpsChange NOTIFICATION-TYPE OBJECTS { vmVmpsIpAddress } STATUS current DESCRIPTION "A VMPS change notification is generated whenever vmVmpsChanges is incremented. The IP address of the new VMPS is sent." ::= { vmNotificationsPrefix 1 } -- Conformance vmMIBConformance OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 3 } vmMIBCompliances OBJECT IDENTIFIER ::= { vmMIBConformance 1 } vmMIBGroups OBJECT IDENTIFIER ::= { vmMIBConformance 2 } vmMIBCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the VLANs." MODULE -- this module MANDATORY-GROUPS { vmMembershipGroup } GROUP vmVQPClientGroup DESCRIPTION "A VQP client must implement this group." GROUP vmVQPNotificationsGroup DESCRIPTION "A VQP client must implement this group." ::= { vmMIBCompliances 1 } vmMIBCompliance2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the VLANs." MODULE -- this module MANDATORY-GROUPS { vmMembershipGroup2 } GROUP vmVQPClientGroup DESCRIPTION "A VQP client must implement this group." GROUP vmVQPNotificationsGroup DESCRIPTION "A VQP client must implement this group." ::= { vmMIBCompliances 2 } vmMIBCompliance3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the VLANs." MODULE -- this module MANDATORY-GROUPS { vmMembershipGroup2 } GROUP vmVQPClientGroup DESCRIPTION "A VQP client must implement this group." GROUP vmVQPNotificationsGroup DESCRIPTION "A VQP client must implement this group." GROUP vm4kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the range of VlanIndex between 1024 and 4095." ::= { vmMIBCompliances 3 } vmMIBCompliance4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the VLANs." MODULE -- this module MANDATORY-GROUPS { vmMembershipGroup3 } GROUP vmVQPClientGroup DESCRIPTION "A VQP client must implement this group." GROUP vmVQPNotificationsGroup DESCRIPTION "A VQP client must implement this group." GROUP vm1kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the multiVlan membership." GROUP vm4kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the range of VlanIndex between 1024 and 4095 and multiVlan membership." GROUP vmStatusGroup DESCRIPTION "This group must be implemented by the entities which support the traps/notifications defined in this MIB." GROUP vmVoiceVlanGroup DESCRIPTION "This group must be implemented by the entities which support the Voice VLAN feature." OBJECT vmVlanType SYNTAX INTEGER { static(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only static(1) is required to be implemented." ::= { vmMIBCompliances 4 } vmMIBCompliance5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the VLANs." MODULE -- this module MANDATORY-GROUPS { vmMembershipGroup3 } GROUP vmVQPClientGroup DESCRIPTION "A VQP client must implement this group." GROUP vmVQPNotificationsGroup DESCRIPTION "A VQP client must implement this group." GROUP vm1kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the multiVlan membership." GROUP vm4kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the range of VlanIndex between 1024 and 4095 and multiVlan membership." GROUP vmStatusGroup DESCRIPTION "This group must be implemented by the entities which support the traps/notifications defined in this MIB." GROUP vmVoiceVlanGroup DESCRIPTION "This group must be implemented by the entities which support the Voice VLAN feature." GROUP vmVoiceVlanExtGroup DESCRIPTION "This group must be implemented by the entities which support the CDP only verification of Voice VLAN feature." OBJECT vmVlanType SYNTAX INTEGER { static(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only static(1) is required to be implemented." ::= { vmMIBCompliances 5 } vmMIBCompliance6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the VLANs." MODULE -- this module MANDATORY-GROUPS { vmMembershipGroup3 } GROUP vmVQPClientGroup DESCRIPTION "A VQP client must implement this group." GROUP vmVQPNotificationsGroup DESCRIPTION "A VQP client must implement this group." GROUP vm1kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the multiVlan membership." GROUP vm4kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the range of VlanIndex between 1024 and 4095 and multiVlan membership." GROUP vmStatusGroup DESCRIPTION "This group must be implemented by the entities which support the traps/notifications defined in this MIB." GROUP vmVoiceVlanGroup DESCRIPTION "This group must be implemented by the entities which support the Voice VLAN feature." GROUP vmVoiceVlanExtGroup DESCRIPTION "This group must be implemented by the entities which support the CDP only verification of Voice VLAN feature." GROUP vmMembershipExtGroup DESCRIPTION "This group must be implemented by the entities which support the VLAN membership feature with bridge port ID greater than 2048." OBJECT vmVlanType SYNTAX INTEGER { static(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only static(1) is required to be implemented." ::= { vmMIBCompliances 6 } vmMIBCompliance7 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the VLANs." MODULE -- this module MANDATORY-GROUPS { vmMembershipGroup3 } GROUP vmVQPClientGroup DESCRIPTION "A VQP client must implement this group." GROUP vmVQPNotificationsGroup DESCRIPTION "A VQP client must implement this group." GROUP vm1kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the multiVlan membership." GROUP vm4kVlanGroup DESCRIPTION "This group must be implemented by the entities which support the range of VlanIndex between 1024 and 4095 and multiVlan membership." GROUP vmStatusGroup DESCRIPTION "This group must be implemented by the entities which support the traps/notifications defined in this MIB." GROUP vmVoiceVlanGroup DESCRIPTION "This group must be implemented by the entities which support the Voice VLAN feature." GROUP vmVoiceVlanExtGroup DESCRIPTION "This group must be implemented by the entities which support the CDP only verification of Voice VLAN feature." GROUP vmMembershipExtGroup DESCRIPTION "This group must be implemented by the entities which support the VLAN membership feature with bridge port ID greater than 2048." GROUP vmVlanCreationGroup DESCRIPTION "This group must be implemented by the entities which support the configuration on the VLAN creation mode when assigning a non-existing VLAN to a port." OBJECT vmVlanType SYNTAX INTEGER { static(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Only static(1) is required to be implemented." ::= { vmMIBCompliances 7 } -- Units of Conformance vmMembershipGroup OBJECT-GROUP OBJECTS { vmMembershipSummaryMemberPorts, vmVlan, vmVlanType, vmPortStatus } STATUS deprecated DESCRIPTION "A collection of objects for displaying and configuring VLAN membership." ::= { vmMIBGroups 1 } vmVQPClientGroup OBJECT-GROUP OBJECTS { vmVmpsVQPVersion, vmVmpsRetries, vmVmpsReconfirm, vmVmpsReconfirmInterval, vmVmpsReconfirmResult, vmVmpsCurrent, vmVmpsIpAddress, vmVmpsPrimary, vmVmpsRowStatus, vmVQPQueries, vmVQPResponses, vmVmpsChanges, vmVQPShutdown, vmVQPDenied, vmVQPWrongDomain, vmVQPWrongVersion, vmInsufficientResources } STATUS current DESCRIPTION "A collection of objects for the managing a VQP client." ::= { vmMIBGroups 2 } vmVQPNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { vmVmpsChange } STATUS current DESCRIPTION "The notification group for a VQP client." ::= { vmMIBGroups 3 } vmStatusGroup OBJECT-GROUP OBJECTS { vmNotificationsEnabled } STATUS current DESCRIPTION "A collection of objects for conveying general status information." ::= { vmMIBGroups 4 } vmMembershipGroup2 OBJECT-GROUP OBJECTS { vmMembershipSummaryMemberPorts, vmVlan, vmVlans, vmVlanType, vmPortStatus } STATUS deprecated DESCRIPTION "A collection of objects for displaying and configuring VLAN membership." ::= { vmMIBGroups 5 } vm4kVlanGroup OBJECT-GROUP OBJECTS { vmVlans2k, vmVlans3k, vmVlans4k } STATUS current DESCRIPTION "A collection of objects providing multiVlan information for VLANS with VlanIndex from 1024 to 4095 which are assigned to one port." ::= { vmMIBGroups 6 } vmVoiceVlanGroup OBJECT-GROUP OBJECTS { vmVoiceVlanId } STATUS current DESCRIPTION "A collection of objects providing information of Voice Vlan feature." ::= { vmMIBGroups 7 } vm1kVlanGroup OBJECT-GROUP OBJECTS { vmVlans } STATUS current DESCRIPTION "A collection of objects providing multiVlan information for VLANS with VlanIndex from 0 to 1023 which are assigned to one port." ::= { vmMIBGroups 8 } vmMembershipGroup3 OBJECT-GROUP OBJECTS { vmMembershipSummaryMember2kPorts, vmVlan, vmVlanType, vmPortStatus } STATUS current DESCRIPTION "A collection of objects for displaying and configuring VLAN membership." ::= { vmMIBGroups 9 } vmVoiceVlanExtGroup OBJECT-GROUP OBJECTS { vmVoiceVlanCdpVerifyEnable } STATUS current DESCRIPTION "A collection of objects providing the information of CDP verification of Voice Vlan feature." ::= { vmMIBGroups 10 } vmMembershipExtGroup OBJECT-GROUP OBJECTS { vmMembershipSummaryExtPorts } STATUS current DESCRIPTION "A collection of objects providing information for VLAN membership with bridge port ID greater than 2048." ::= { vmMIBGroups 11 } vmVlanCreationGroup OBJECT-GROUP OBJECTS { vmVlanCreationMode } STATUS current DESCRIPTION "A collection of objects for the configuration on VLAN creation mode when assigning a non-existing VLAN to a port." ::= { vmMIBGroups 12 } END