-- ***************************************************************** -- ciscoVismCasMIB -- The MIB is for CAS feature on VISM(Voice Interworking Service Module) -- -- July 2003, George Ogagan -- -- Copyright (c) 2003 by cisco Systems, Inc. -- All rights reserved. -- **************************************************************** CISCO-VISM-CAS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF voice FROM BASIS-MIB ciscoWan FROM CISCOWAN-SMI; ciscoVismCasMIB MODULE-IDENTITY LAST-UPDATED "200307160000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The MIB module contain the CAS backhaul feature in VISM" REVISION "200307160000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in SMIv1 version. The MIB has been converted to SMIv2 version and descriptions of some of the objects have been modified." ::= { ciscoWan 88 } vismCasGrp OBJECT IDENTIFIER ::= { voice 8 } -- ------------------------------------------------------------------ -- -- vismCasConfig group -- -- -- The MIB variables in this group have been defined to configure -- the CAS backhaul feature on VISM. In the current release, CAS -- is backhauled to the Call Agent using SGCP protocol. VISM card -- can be configured with different CAS variants by downlading the -- file which contains the signal definition and the state machine -- information about the CAS variant. -- -- ------------------------------------------------------------------ vismCasVariantTable OBJECT-TYPE SYNTAX SEQUENCE OF VismCasVariantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration information about different CAS variants. " ::= { vismCasGrp 1 } vismCasVariantEntry OBJECT-TYPE SYNTAX VismCasVariantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vismCasVariantTable. Each entry consists of configuration information for a specific CAS variant. An entry may be created by specifying vismCasVariantName, and vismCasFileName. Upon the creation of the table entry, the file specified by vismCasFileName will be downloaded and the CAS finite state machine will be initialized based on the information contained in this file. " INDEX { vismCasVariantName } ::= { vismCasVariantTable 1 } VismCasVariantEntry ::= SEQUENCE { vismCasVariantName DisplayString, vismCasFileName DisplayString, vismCasTRinging Integer32, vismCasDigitMethod INTEGER, vismCasInterdigitTpart Integer32, vismCasInterdigitTcrit Integer32, vismCasInterdigitTMF Integer32, vismCasVariantState INTEGER, vismCasRowStatus INTEGER, vismCasCountryCode DisplayString, vismCasVariantSource INTEGER } vismCasVariantName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a string identifier for the CAS variant. It is used as index to the table. The maximum length allowed is 64 bytes. " ::= { vismCasVariantEntry 1 } vismCasFileName OBJECT-TYPE SYNTAX DisplayString(SIZE (2..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object gives the name of the file which contains the signal definition and the Finite State Machine definition for the CAS variant. The name is supplied during the creation of the table entry. Modifying the value of this object is not allowed. Upon the creation of the table entry, the file will be downloaded from a tftp server configured in the vismTftpServerDn object and the CAS finite state machine will be initialized based on the information contained in this file. This object must be provided in order to create en entry in this table. " ::= { vismCasVariantEntry 2 } -- This object is deprecated as we have a separate ringing timeout -- on a per line basis vismCasTRinging OBJECT-TYPE SYNTAX Integer32(10..600) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " This object gives the ringing time in seconds for the Cas Variant. The ringing will be on until this timer expires or until an off hook is received. " DEFVAL { 180 } ::= { vismCasVariantEntry 3 } vismCasDigitMethod OBJECT-TYPE SYNTAX INTEGER { mf (1), dtmf (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " The default digit method to be used for digit collection. If the digit method can not be derived from the digit map specified by the call agent in the XGCP message, this digit method will be used. " DEFVAL { dtmf } ::= { vismCasVariantEntry 4 } vismCasInterdigitTpart OBJECT-TYPE SYNTAX Integer32 (10..10000) MAX-ACCESS read-write STATUS current DESCRIPTION " This object represents the partial dial timing in seconds and is used along with a digit map as the inter-digit timer. The timer is not started untill the first digit is entered, and the timer is restarted after each new digit is entered untill either a digit map match or mismatch occurs. " DEFVAL { 16 } ::= { vismCasVariantEntry 5 } vismCasInterdigitTcrit OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-write STATUS current DESCRIPTION " This object represents the critical timing in seconds. If used along with a digit map, the timer is started when the last digit is received. i.e and when no more digits are required for a digit map match. After this timer expires, the digit map match is assumed to be complete. If used without a digit map, the timer is started immediately and cancelled (but not restarted) as soon as a digit is entered. " DEFVAL { 4 } ::= { vismCasVariantEntry 6 } vismCasInterdigitTMF OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the interdigit timeout value for MF digits. The timeout value is in seconds. " DEFVAL { 1 } ::= { vismCasVariantEntry 7 } vismCasVariantState OBJECT-TYPE SYNTAX INTEGER { notConfigured (1), configInProgress (2), configured (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the configuration status of the CAS variant. When the table entry is created, downloading of the file will be initiated and the state will be set to configInProgress. Once the file is successfully downloaded and the CAS finite state machine successfully initialized, the state will be set to configured. If the initialization fails, the state will be set to notConfigured. " ::= { vismCasVariantEntry 8 } vismCasRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), createAndGo(4), destroy(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows to add, delete or modify the entry for a CAS variant. createAndGo: Use this to add an entry in this table, provided the vismCasVariantName and vismCasFileName MIB objects are available to be set. active: This values is returned, once the row is created destroy: Use this to delete an entry from this table. " ::= { vismCasVariantEntry 9 } -- This object is deprecated as we have a seperate country code tone plans -- on a per line basis vismCasCountryCode OBJECT-TYPE SYNTAX DisplayString(SIZE (0..2)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION " Represents a case-insensitive 2-letter country code taken from ISO-3166. " DEFVAL { "US" } ::= { vismCasVariantEntry 10 } vismCasVariantSource OBJECT-TYPE SYNTAX INTEGER { unspecified (1), internal (2), external (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies where the file defining this CAS variant resides. 1. Unspecified. This value indicates that the location of the file is not specified here. In this case, the location is determined based on whether the TFTP server domain is defined on VISM. The file is built into the firmware if no tftp domain is defined on VISM and resides on the TFTP server if a TFTP domain is defined on VISM. 2. Internal. Indicates that the file is built into the firmware. 3. External. Indicates that the file resides on the TFTP server configured on VISM. " DEFVAL { unspecified } ::= { vismCasVariantEntry 11 } -- -------------------------------------------- -- vismCasXgcpVariantTable -- -------------------------------------------- vismCasXgcpVariantTable OBJECT-TYPE SYNTAX SEQUENCE OF VismCasXgcpVariantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in this table is implicitly created/deleted when an entry in vismCasVariantTable is created/deleted in switching mode ." ::= { vismCasGrp 2 } vismCasXgcpVariantEntry OBJECT-TYPE SYNTAX VismCasXgcpVariantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vismCasXgcpVariantTable. " INDEX { vismCasXgcpVariantName } ::= { vismCasXgcpVariantTable 1 } VismCasXgcpVariantEntry ::= SEQUENCE { vismCasXgcpVariantName DisplayString, vismCasXgcpFileName DisplayString, vismCasXgcpMaxReXmitTime Integer32, vismCasXgcpInitialReXmitTime Integer32, vismCasXgcpMaxRetries Integer32 } vismCasXgcpVariantName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " This object is a string identifier for the CAS variant. It is used as index to the table. " ::= { vismCasXgcpVariantEntry 1 } vismCasXgcpFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current -- obsolete DESCRIPTION " This object gives the name of the file which contains the signal definition and the Finite State Machine definition for the CAS variant. " ::= { vismCasXgcpVariantEntry 2 } vismCasXgcpMaxReXmitTime OBJECT-TYPE SYNTAX Integer32 (10..10000) MAX-ACCESS read-write STATUS current DESCRIPTION " This object represents the maximum timeout value in milli seconds, used for retransmitting unacknowledged XGCP messages at the Call Agent - CAS/PBX interface. The value of this object is settable in 10 ms increments. " DEFVAL { 500 } ::= { vismCasXgcpVariantEntry 3 } vismCasXgcpInitialReXmitTime OBJECT-TYPE SYNTAX Integer32 (10..10000) MAX-ACCESS read-write STATUS current DESCRIPTION " This object represents the initial timeout value in milli seconds, used for retransmitting unacknowledged XGCP messages at the Call Agent - CAS/PBX interface. The value of this object is settable in 10 ms increments. " DEFVAL { 100 } ::= { vismCasXgcpVariantEntry 4 } vismCasXgcpMaxRetries OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies the number of retries for a message that exceeds vismCasXgcpMaxReXmitTime or vismCasXgcpInitialReXmitTime. " DEFVAL { 4 } ::= { vismCasXgcpVariantEntry 5 } -- conformance information ciscoVismCasMIBConformance OBJECT IDENTIFIER ::= { ciscoVismCasMIB 2 } ciscoVismCasMIBGroups OBJECT IDENTIFIER ::= { ciscoVismCasMIBConformance 1 } ciscoVismCasMIBCompliances OBJECT IDENTIFIER ::= { ciscoVismCasMIBConformance 2 } -- compliance statements ciscoVismCasCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for objects related to VISM-CAS-MIB." MODULE -- this module MANDATORY-GROUPS { ciscoVismCasVariantGroup, ciscoVismCasXgcpVariantGroup } ::= { ciscoVismCasMIBCompliances 1 } ciscoVismCasVariantGroup OBJECT-GROUP OBJECTS { vismCasVariantName, vismCasFileName, vismCasDigitMethod, vismCasInterdigitTpart, vismCasInterdigitTcrit, vismCasInterdigitTMF, vismCasVariantState, vismCasRowStatus, vismCasVariantSource } STATUS current DESCRIPTION "The collection of objects which are used to represent VISM CAS varient." ::= { ciscoVismCasMIBGroups 1 } ciscoVismCasXgcpVariantGroup OBJECT-GROUP OBJECTS { vismCasXgcpVariantName, vismCasXgcpFileName, vismCasXgcpMaxReXmitTime, vismCasXgcpInitialReXmitTime, vismCasXgcpMaxRetries } STATUS current DESCRIPTION "The collection of objects that is implicitly created/deleted when an entry in vismCasVariantTable is created/deleted in switching mode." ::= { ciscoVismCasMIBGroups 2 } cvcVariantDeprecatedGroup OBJECT-GROUP OBJECTS { vismCasTRinging, vismCasCountryCode } STATUS deprecated DESCRIPTION "The collection of objects that were supported earlier but deprecated now." ::= { ciscoVismCasMIBGroups 3 } END