--
-- *****************************************************************
-- Cisco Switch Resource Usage MIB
--
-- Mar, 2001 Ranbir Parmar
--
-- Copyright (c) 2001 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--

CISCO-SWITCH-USAGE-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, Counter32, Counter64,
        OBJECT-TYPE            FROM SNMPv2-SMI
        MODULE-COMPLIANCE, 
        OBJECT-GROUP           FROM SNMPv2-CONF
        ifIndex
                               FROM IF-MIB
        ciscoMgmt              FROM CISCO-SMI;


ciscoSwitchUsageMIB   MODULE-IDENTITY
        LAST-UPDATED	"200105020000Z"
        ORGANIZATION	"Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                Tel: +1 800 553-NETS

                E-mail: cs-switch-usage-mib@cisco.com"
        DESCRIPTION
                "This MIB defines objects related to statistics 
                for the usage of switch fabric. The switch fabric
                is used by the incoming packets from the line/network
                to a interface. Such packets are called ingress packets.
                Counters are maintained for number of ingress packets/
                octets switched by the switch fabric for each 
                interface.
                NOTE: These counters are not counting the total number 
                of incoming packets and octets for a particular 
                interface. Instead only the counts of packets and 
                octets that actually use the switch-fabric are being
                accounted for by this MIB.  Therefore, the counters in 
                this MIB are distinctly different from packet and octet 
                counters found in the IF-MIB."

        REVISION        "200105020000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoMgmt 201 }


ciscoSwitchUsageMIBObjects OBJECT IDENTIFIER 
                         ::= { ciscoSwitchUsageMIB 1 }

ciscoSwitchUsageStats      OBJECT IDENTIFIER
                         ::= { ciscoSwitchUsageMIBObjects 1 }


-- the switch usage statistics group
 
cswitchUsageStatTable OBJECT-TYPE
        SYNTAX         SEQUENCE OF CswitchUsageStatEntry
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION    
                "A list of switch resouce usage statistics 
                entries. The statistics will give information 
                on the switch usage by each interface." 
        ::= { ciscoSwitchUsageStats 1 }
 
cswitchUsageStatEntry OBJECT-TYPE
        SYNTAX         CswitchUsageStatEntry
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION
                "Entry contains information of a particular 
                interface in terms of how much switch resource 
                it has used.
                An entry in this table exists for each ifEntry 
                with an ifType of fastEther(62) for FastEthernet
                interface and gigabitEthernet (117) for Gigabit
                interface."
        INDEX          { ifIndex }
        ::= { cswitchUsageStatTable 1 }
 
CswitchUsageStatEntry ::= 
        SEQUENCE {
                 cswitchUsageByIngrsIntfPkts        Counter32,
                 cswitchUsageByIngrsIntfHCPkts      Counter64,
                 cswitchUsageByIngrsIntfOctets      Counter32,
                 cswitchUsageByIngrsIntfHCOctets    Counter64
        }

cswitchUsageByIngrsIntfPkts OBJECT-TYPE     
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
                "The number of ingress packets of a interface 
                which use the switch resource."
        ::= { cswitchUsageStatEntry  1 }

cswitchUsageByIngrsIntfHCPkts OBJECT-TYPE
        SYNTAX        Counter64
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
                "The number of ingress packets of a interface
                which use the switch resource.

                This is a 64 bit (High Capacity) version of
                the cswitchUsageByIngrsIntfPkts counter for
                use with SNMP v2c or v3 Managers."
        ::= { cswitchUsageStatEntry  2 }

cswitchUsageByIngrsIntfOctets OBJECT-TYPE     
        SYNTAX        Counter32
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
                "The number of ingress octets of a interface 
                which use the switch resource."
        ::= { cswitchUsageStatEntry  3 }

cswitchUsageByIngrsIntfHCOctets OBJECT-TYPE
        SYNTAX        Counter64
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION
                "The number of ingress octets of a interface
                which use the switch resource.
                This is a 64 bit (High Capacity) version of
                the cswitchUsageByIngrsIntfOctets counter for
                use with SNMP v2c or v3 Managers."
        ::= { cswitchUsageStatEntry  4 }

-- notifications

ciscoSwitchUsageMIBNotifyPrefix  OBJECT IDENTIFIER
                             ::= { ciscoSwitchUsageMIB 2 }
ciscoSwitchUsageMIBNotifications  OBJECT IDENTIFIER 
                 ::= { ciscoSwitchUsageMIBNotifyPrefix 0 }

-- conformance information

ciscoSwitchUsageMIBConformance    OBJECT IDENTIFIER 
                             ::= { ciscoSwitchUsageMIB 3 }
ciscoSwitchUsageMIBCompliances    OBJECT IDENTIFIER 
                             ::= { ciscoSwitchUsageMIBConformance 1 }
ciscoSwitchUsageMIBGroups         OBJECT IDENTIFIER 
                             ::= { ciscoSwitchUsageMIBConformance 2 }

-- compliance statement

ciscoSwitchUsageMIBCompliance  MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for the switch usage 
                statistics group."
        MODULE  -- this module
                MANDATORY-GROUPS { ciscoSwitchUsageMIBGroup }
        ::= { ciscoSwitchUsageMIBCompliances 1 }

-- units of conformance

ciscoSwitchUsageMIBGroup   OBJECT-GROUP
        OBJECTS { 
                cswitchUsageByIngrsIntfPkts,
                cswitchUsageByIngrsIntfHCPkts,
                cswitchUsageByIngrsIntfOctets,
                cswitchUsageByIngrsIntfHCOctets
        }
        STATUS    current
        DESCRIPTION
                "The Object Group for switch usage statistics"
        ::= { ciscoSwitchUsageMIBGroups 1 }
 
END