-- ***************************************************************** -- CISCO-SLB-HEALTH-MON-MIB.my: Server Load-Balancing(SLB) Health -- Monitoring MIB -- January 2006, Saifullah M.A. -- -- Copyright (c) 2002, 2005, 2006, 2008 by cisco Systems Inc. -- All rights reserved. -- ***************************************************************** CISCO-SLB-HEALTH-MON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Counter32, Gauge32 FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB TimeInterval, TEXTUAL-CONVENTION, TruthValue, DateAndTime, RowStatus FROM SNMPv2-TC CiscoPort FROM CISCO-TC slbEntity, SlbServerString, slbServerFarmName FROM CISCO-SLB-MIB SlbUrlString, SlbFunctionNameString, cslbxServerProbes FROM CISCO-SLB-EXT-MIB ciscoMgmt FROM CISCO-SMI; ciscoSlbHealthMonMIB MODULE-IDENTITY LAST-UPDATED "200806260000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-slb@cisco.com" DESCRIPTION "An extension to the CISCO-SLB-EXT-MIB for SLB health monitoring probes. SLB: Server Load Balancing. Server load balancing provides for the balancing of packets and connections arriving at the SLB device across a number of other devices, such as real servers, firewalls, or caches. A system containing an SLB device typically exhibits higher performance, scalability, and reliability than any of the devices being load balanced. An SLB device determines how to handle incoming frames and connections according to the contents of incoming data and various configuration options. In determining how to handle incoming data, an SLB device may examine the data at any OSI layer, including Layer 7. This MIB includes information on the health monitoring probes that can be used for monitoring the health of real servers. Health checking provides the ability of the content switch to detect if a server is available for load balancing. Health probes used for health checking allow testing various application level functionality. The active probes are sent at regular intervals and the lack of a response can lead to a specific server or and entire group of servers being declared as not available. Following probes are based on TCP: http, https, smtp, telnet, ftp, tcp, script, ldap, tacacs, sip, echo, finger. Following probes are based on UDP: tftp, udp, sip, echo,. Acronyms and terms: SLB Server Load Balancing VIP Virtual Server IP address NAT Network Address Translation SF Serverfarm FT Fault Tolerance SSL Secure Sockets Layer TLS Transport Layer Security Server Farm : Contains cluster of Real Server Real Server : Real Servers are physical devices assigned to a server farm. Real servers provide services that are load balanced. Health Probe : The mechanisms to monitor the health of real servers or rservers. Virtual IP : The IP through which the real server is reached during load balancing. Probe Instance : An instance of the probe identified by cslbxProbeName. A probe instance is created for every probe association. For example: When a probe is associated with a real server a probe instance is created for that probe. Probe Port : This mechanism introduces the capability Inheritance for the probe instance to inherit the virtual ip address port or the the real server port (identified by cshMonServerfarmRealServerPort) when the probe port (identified by cslbxProbePort) is not configured. The precedence of inheritance is as follows 1. Probe's configured port 2. Real server port 3. Virtual ip address port 4. Probes default port identified by cslbxProbePort. Examples: Scenario 1: Probe's configured port = 100 Real server port = 200 Virtual ip address port = 300 Probe's default port = 80 Inherited port of the probe instance = 100 Scenario 2: Probe's configured port = not configured Real server port = 200 Virtual ip address port = 300 Probe's default port = 80 Inherited port of the probe instance = 200 Scenario 3: Probe's configured port = not configured Real server port = not configured Virtual ip address port = 300 Probe's default port = 80 Inherited port of the probe instance = 300 Scenario 4: Probe's configured port = not configured Real server port = not configured Virtual ip address port = not configured Probe's default port = 80 Inherited port of the probe instance = 80 Scenario 5: There can be scenarios wherein there may be multiple inherited ports for a probe instance. There are configurations where multiple virtual ip addresses with different ports share the same probe instance and the probe has no configured port or real server port attached. In that case the shared probe instance has multiple inherited ports. A typical scenario might be Probe's configured port = not configured Real server port = not configured Ports of the virtual ip addresses which shares the probe instance = 300,400 Probe's default port = 80 Inherited port of the probe instance = 300,400" REVISION "200806260000Z" DESCRIPTION "-Added CiscoProbeInheritedPortType TEXTUAL-CONVENTION. -Deprecated cshMonSfarmRealProbeStatsTable. -Added cshMonServerfarmRealProbeStatsTable. -Added cshMonProbeTypeStatsTable. -Added the following notifications ciscoSlbHealthMonSocketOveruse ciscoSlbHealthMonSocketNormaluse -Added cshMonSocketOverusageCount notification object. -Deprecated cshMonSfarmrealserverProbeStatsGroup OBJECT-GROUP. -Deprecated ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE. -Added the following OBJECT-GROUP's cshMonSfarmrealserverProbeStatsGroupRev1 cshMonProbeTypeStatsGroup cshMonNotifObjectsGroup -Added cshMonNotifGroup NOTIFICATION-GROUP. -Added ciscoSlbHealthMonMIBComplianceRev3 MODULE-COMPLIANCE." REVISION "200803110000Z" DESCRIPTION "- Added CiscoProbeHealthMonState TEXTUAL-CONVENTION. - Added cslbxProbeState to the cslbxProbeCfgTable. - Added cshMonSfarmRealProbeStatsTable. - Deprecated cslbHealthMonServerProbesGroup object group. - Deprecated ciscoSlbHealthMonMIBComplianceRev1 compliance statement. - Added cslbHealthMonServerProbesGroupRev1 OBJECT-GROUP. - Added ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE." REVISION "200611140000Z" DESCRIPTION "- Added following object in cslbxProbeHTTPCfgTable cslbxProbeHTTPSslTlsVersionSupported. - Added 'all' enum in cslbxProbeHTTPCfgSslTlsVersion object. - Added 'rtspProbe' and 'snmpProbe' in SlbProbeType TEXTUAL CONVENTION - Added following group cslbHealthMonHTTPSProbesGroupRev1. - Added following in Compliance/Conformance ciscoSlbHealthMonMIBComplianceRev1." REVISION "200601180000Z" DESCRIPTION "Initial version of this MIB module. SlbProbeType : New enums(value 10-20) added. - Following tables were originally defined in CISCO-SLB-EXT-MIB cslbxProbeCfgTable cslbxDnsProbeIpTable cslbxProbeHeaderCfgTable cslbxProbeExpectStatusCfgTable - Added following objects in cslbxProbeCfgTable cslbxProbeDescription cslbxProbeProtocolType cslbxProbeRouteMethod cslbxProbeUserName cslbxProbePassword cslbxProbePassCount cslbxProbePriority cslbxProbeConnTermination cslbxProbeSocketReuse cslbxProbeSendDataType cslbxProbeSendData - defined following tables cslbxProbeHTTPCfgTable cslbxProbeSIPCfgTable cslbxProbeFTPCfgTable cslbxProbeTFTPCfgTable cslbxProbeIMAPCfgTable - Added UNITS clause for the following objects cslbxProbeReceiveTimeout cslbxProbeTcpOpenTimeout." ::= { ciscoMgmt 508 } -- ************************************************************* -- * * -- * SLB-EXT - Probe Configuration Table * -- * * -- ************************************************************* cslbxProbeCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the parameters of probes." ::= { cslbxServerProbes 1 } cslbxProbeCfgEntry OBJECT-TYPE SYNTAX CslbxProbeCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry provides the basic configuration of a probe of a particular name, served by a particular SLB entity. This entry may be of any probe type." INDEX { slbEntity, cslbxProbeName } ::= { cslbxProbeCfgTable 1 } CslbxProbeCfgEntry ::= SEQUENCE { cslbxProbeName SlbServerString, cslbxProbeType SlbProbeType, cslbxProbeInterval TimeInterval, cslbxProbeRetries Unsigned32, cslbxProbeFailedInterval TimeInterval, cslbxProbeReceiveTimeout TimeInterval, cslbxProbeTcpOpenTimeout TimeInterval, cslbxProbeAlternateDestAddrType InetAddressType, cslbxProbeAlternateDestAddr InetAddress, cslbxProbeDnsDomainName SnmpAdminString, cslbxProbeHttpRequestMethod SnmpAdminString, cslbxProbeHttpRequestUrl SlbUrlString, cslbxProbeRowStatus RowStatus, cslbxProbeScriptName SlbFunctionNameString, cslbxProbeScriptArguments SnmpAdminString, cslbxProbePort CiscoPort, cslbxProbeDescription SnmpAdminString, cslbxProbeRouteMethod INTEGER, cslbxProbeProtocolType INTEGER, cslbxProbePassCount Unsigned32, cslbxProbePriority Unsigned32, cslbxProbeUserName SnmpAdminString, cslbxProbePassword SnmpAdminString, cslbxProbeConnTermination INTEGER, cslbxProbeSocketReuse TruthValue, cslbxProbeSendDataType INTEGER, cslbxProbeSendData SnmpAdminString, cslbxProbeState TruthValue } cslbxProbeName OBJECT-TYPE SYNTAX SlbServerString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the probe." ::= { cslbxProbeCfgEntry 1 } cslbxProbeType OBJECT-TYPE SYNTAX SlbProbeType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of probe." ::= { cslbxProbeCfgEntry 2 } cslbxProbeInterval OBJECT-TYPE SYNTAX TimeInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time between health checks. It is from the end of previous check to the beginning of the next check." DEFVAL { 12000 } ::= { cslbxProbeCfgEntry 3 } cslbxProbeRetries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of consecutive retries without a successful probe before marking the real server as 'failed'." DEFVAL { 3 } ::= { cslbxProbeCfgEntry 4 } cslbxProbeFailedInterval OBJECT-TYPE SYNTAX TimeInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time before retrying a 'failed' real server to see if it has recovered yet." DEFVAL { 30000 } ::= { cslbxProbeCfgEntry 5 } cslbxProbeReceiveTimeout OBJECT-TYPE SYNTAX TimeInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum time to wait for a reply from a real server before considering this probe attempt to have failed." DEFVAL { 1000 } ::= { cslbxProbeCfgEntry 6 } cslbxProbeTcpOpenTimeout OBJECT-TYPE SYNTAX TimeInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum time to wait for a TCP SYN/ACK frame from the real server. This entry is only valid for probes employing TCP, such as SMTP and HTTP probes." DEFVAL { 1000 } ::= { cslbxProbeCfgEntry 7 } cslbxProbeAlternateDestAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address stored in cslbxProbeAlternateDestAddr." DEFVAL { ipv4 } ::= { cslbxProbeCfgEntry 8 } cslbxProbeAlternateDestAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The alternative destination IP address to be used with the probing packet. Probe frames are normally sent to a real server IP address. If the setting is not '0.0.0.0', probe frames are sent to the IP address given by this object. This entry is only valid with the following probes(cslbxProbeType value): icmpProbe, tcpProbe, dnsProbe, httpProbe, ftpProbe, telnetProbe, smtpProbe udpProbe, httpsProbe, ldapProbe, popProbe, imapProbe, radiusProbe, tacacsProbe, sipProbe, tftpProbe, fingerProbe, echoProbe." DEFVAL { ''H } ::= { cslbxProbeCfgEntry 9 } cslbxProbeDnsDomainName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The domain name string use with the DNS probe. (Only applicable to DNS probes.)" ::= { cslbxProbeCfgEntry 10 } cslbxProbeHttpRequestMethod OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The request method type string to be used in the HTTP probe packets. (Only applicable to HTTP probes.)" REFERENCE "RFC 2616 Hypertext Transfer Protocol -- HTTP/1.1 Section 5.1.1." DEFVAL { "get" } ::= { cslbxProbeCfgEntry 11 } cslbxProbeHttpRequestUrl OBJECT-TYPE SYNTAX SlbUrlString MAX-ACCESS read-create STATUS current DESCRIPTION "The URI string in the HTTP request of HTTP probe packets. (Only applicable to HTTP probes.)" DEFVAL { "" } ::= { cslbxProbeCfgEntry 12 } cslbxProbeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status is used by a management station to create or delete the row entry in cslbxProbeCfgTable following the RowStatus textual convention." ::= { cslbxProbeCfgEntry 13 } cslbxProbeScriptName OBJECT-TYPE SYNTAX SlbFunctionNameString MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the function to be executed. (Only applicable to scriptedProbe type.)" DEFVAL { ''H } ::= { cslbxProbeCfgEntry 14 } cslbxProbeScriptArguments OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The argument parameters passed into the executable script. (Only applicable to scriptedProbe type.)" DEFVAL { ''H } ::= { cslbxProbeCfgEntry 15 } cslbxProbePort OBJECT-TYPE SYNTAX CiscoPort MAX-ACCESS read-create STATUS current DESCRIPTION "The port number to be used by the probe. The value of zero indicates the probe will use the default port number. The default port number can be 0 or the default port of that particular probe. This object is not applicable when cslbxProbeType is 'icmpProbe'." DEFVAL { 0 } ::= { cslbxProbeCfgEntry 16 } cslbxProbeDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used for configuring the description of the probe." DEFVAL { "" } ::= { cslbxProbeCfgEntry 17 } cslbxProbeRouteMethod OBJECT-TYPE SYNTAX INTEGER { other(1), transparent(2), routingTable(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether the probe destined to IP address specified in cslbxProbeAlternateDestAddr be routed using internal routing table or forced to use the known mac-address of the real-server/gateway that probe is associated with. The value 'routingTable' specifies that address be routed using internal routing table. The value 'transparent' specifies that the probe destined to cslbxProbeAlternateDestAddr is routed using the ip address of the real server or gateway this probe is associated with. This object is applicable only if cslbxProbeAlternateDestAddr is configured." DEFVAL { transparent } ::= { cslbxProbeCfgEntry 18 } cslbxProbeProtocolType OBJECT-TYPE SYNTAX INTEGER { other(1), tcp(2), udp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used for configuring the transport layer protocol to send probe messages. The possible value(s) are : other: values other than mentioned below. This value can not be written. tcp : TCP is used as transport layer protocol. udp : UDP is used as transport layer protocol. This object can be set for the entries with following values of cslbxProbeType: sipProbe, echoProbe For other probes, this object can not be written and the value of this object is based on the cslbxProbeType." DEFVAL { tcp } ::= { cslbxProbeCfgEntry 19 } cslbxProbePassCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the number of successful probe responses that should be received before declaring a failed real server as pass. This object is used in conjunction with 'cslbxProbeFailedInterval'." ::= { cslbxProbeCfgEntry 20 } cslbxProbePriority OBJECT-TYPE SYNTAX Unsigned32 (0..255 ) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the probe priority. The priority value is in the decreasing order of the actual priority, i.e., lower the value higher the priority. Probes associated with critical services can be configured with highest priority such that the results of these probes can be used to trigger a state change in configuration." DEFVAL { 2 } ::= { cslbxProbeCfgEntry 21 } cslbxProbeUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the user name required for authentication. This object is applicable for following value of 'cslbxProbeType' : httpprobe, httpsProbe telnetProbe, ftpProbe, ldapProbe, imapProbe, popProbe, radiusProbe, tacacsProbe." ::= { cslbxProbeCfgEntry 22 } cslbxProbePassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the password required for authentication. This object is applicable for following value of 'cslbxProbeType' : httpprobe, httpsProbe telnetProbe, ftpProbe, ldapProbe, imapProbe, popProbe, radiusProbe, tacacsProbe. This object returns zero length octet string when read." ::= { cslbxProbeCfgEntry 23 } cslbxProbeConnTermination OBJECT-TYPE SYNTAX INTEGER { graceful(1), forced(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies how the connections need to be terminated. The possible value(s) are : graceful : follow graceful handshake for terminating connections. forced : send RST to terminate connections. This object is applicable only for TCP based probes." DEFVAL { forced } ::= { cslbxProbeCfgEntry 24 } cslbxProbeSocketReuse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether to reuse the socket or not for the connection oriented probes. If set to 'true' same socket is re-used for multiple probes. If set to 'false' new socket will be created. This object is applicable only for TCP based probes." ::= { cslbxProbeCfgEntry 25 } cslbxProbeSendDataType OBJECT-TYPE SYNTAX INTEGER { ascii(1), binary(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the data to be sent for the appropriate probes. The possible value(s) are: ascii : ASCII data binary : binary data. This object is used in conjunction with object 'cslbxProbeSendData'." DEFVAL { ascii } ::= { cslbxProbeCfgEntry 26 } cslbxProbeSendData OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the data to be sent for the appropriate probes. This object is applicable for following value(s) of cslbxProbeType : echoProbe fingerProbe sipProbe tcpProbe udpProbe." ::= { cslbxProbeCfgEntry 27 } cslbxProbeState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the state of the probe. When the probe is associated with a real server or server farm it will be active which is represented by value 'true'. When the probe is active and if the real server is administratively put into in-service, then the real server health monitoring will be started. When the probe is not associated with a real server or server farm it will be inactive which is represented by value 'false', so no health monitoring will be performed." DEFVAL { false } ::= { cslbxProbeCfgEntry 28 } -- ************************************************************* -- * * -- * SLB-EXT - DNS Probe Expected IP Configuration Table * -- * * -- ************************************************************* cslbxDnsProbeIpTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxDnsProbeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the parameters of DNS probes. In a DNS probe, resolution of a specific domain name is requested, and the resulting IP address must match one of a list of 'expected IP addresses' configured for that probe. This table stores the list of expected IP addresses for each DNS probe." ::= { cslbxServerProbes 2 } cslbxDnsProbeIpEntry OBJECT-TYPE SYNTAX CslbxDnsProbeIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address in this entry is a valid response to a request for resolution of the domain name associated with the DNS probe in this entry." INDEX { slbEntity, cslbxDnsProbeIpProbeName, cslbxDnsProbeIpAddressType, cslbxDnsProbeIpAddress } ::= { cslbxDnsProbeIpTable 1 } CslbxDnsProbeIpEntry ::= SEQUENCE { cslbxDnsProbeIpProbeName SlbServerString, cslbxDnsProbeIpAddressType InetAddressType, cslbxDnsProbeIpAddress InetAddress, cslbxDnsProbeIpRowStatus RowStatus } cslbxDnsProbeIpProbeName OBJECT-TYPE SYNTAX SlbServerString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the DNS probe." ::= { cslbxDnsProbeIpEntry 1 } cslbxDnsProbeIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of address stored in cslbxDnsProbeIpAddress." ::= { cslbxDnsProbeIpEntry 2 } cslbxDnsProbeIpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (1..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address that may be expected in response to a DNS probe from a 'healthy' real DNS server." ::= { cslbxDnsProbeIpEntry 3 } cslbxDnsProbeIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object used by a management station to create or delete the row entry in cslbxDnsProbeIpTable following the RowStatus textual convention." ::= { cslbxDnsProbeIpEntry 4 } -- ************************************************************* -- * * -- * SLB-EXT - HTTP Probe Header Table * -- * * -- ************************************************************* cslbxProbeHeaderCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeHeaderCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the parameters of HTTP probes. In particular, each HTTP probe request may be sent with a number of fixed HTTP headers. This table defines such fixed HTTP headers sent with HTTP probes." ::= { cslbxServerProbes 3 } cslbxProbeHeaderCfgEntry OBJECT-TYPE SYNTAX CslbxProbeHeaderCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry defines the HTTP header value of a particular HTTP header name sent with a particular HTTP probe, served by a particular SLB entity." INDEX { slbEntity, cslbxProbeHeaderProbeName, cslbxProbeHeaderFieldName } ::= { cslbxProbeHeaderCfgTable 1 } CslbxProbeHeaderCfgEntry ::= SEQUENCE { cslbxProbeHeaderProbeName SlbServerString, cslbxProbeHeaderFieldName SnmpAdminString, cslbxProbeHeaderFieldValue SnmpAdminString, cslbxProbeHeaderRowStatus RowStatus } cslbxProbeHeaderProbeName OBJECT-TYPE SYNTAX SlbServerString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the HTTP probe." ::= { cslbxProbeHeaderCfgEntry 1 } cslbxProbeHeaderFieldName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An HTTP header of this name is transmitted in the HTTP request sent by this probe." ::= { cslbxProbeHeaderCfgEntry 2 } cslbxProbeHeaderFieldValue OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The HTTP header value associated with the HTTP header name given by cslbxProbeHeaderFieldName." ::= { cslbxProbeHeaderCfgEntry 3 } cslbxProbeHeaderRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object used by a management station to create or delete the row entry in cslbxProbeHeaderTable following the RowStatus textual convention." ::= { cslbxProbeHeaderCfgEntry 4 } -- ************************************************************* -- * * -- * SLB-EXT - Probe Expect Status Codes Configuration Table * -- * * -- ************************************************************* cslbxProbeExpectStatusCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeExpectStatusCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the expect status codes returned by a server." ::= { cslbxServerProbes 4 } cslbxProbeExpectStatusCfgEntry OBJECT-TYPE SYNTAX CslbxProbeExpectStatusCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry provides the configuration of a range of expect status codes for a particular probe, served by a particular SLB entity." INDEX { slbEntity, cslbxProbeExpectStatusProbeName, cslbxProbeExpectStatusMinValue } ::= { cslbxProbeExpectStatusCfgTable 1 } CslbxProbeExpectStatusCfgEntry ::= SEQUENCE { cslbxProbeExpectStatusProbeName SlbServerString, cslbxProbeExpectStatusMinValue Unsigned32, cslbxProbeExpectStatusMaxValue Unsigned32, cslbxProbeExpectStatusRowStatus RowStatus } cslbxProbeExpectStatusProbeName OBJECT-TYPE SYNTAX SlbServerString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the probe." ::= { cslbxProbeExpectStatusCfgEntry 1 } cslbxProbeExpectStatusMinValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The starting value of the expect status code range." ::= { cslbxProbeExpectStatusCfgEntry 2 } cslbxProbeExpectStatusMaxValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ending value of the expect status code range." ::= { cslbxProbeExpectStatusCfgEntry 3 } cslbxProbeExpectStatusRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object used by a management station to create or delete the row entry in cslbxProbeExpectStatusCfgTable following the RowStatus textual convention." ::= { cslbxProbeExpectStatusCfgEntry 4 } -- ************************************************************* -- * * -- * HTTP/HTTPS Probe Table * -- * * -- ************************************************************* cslbxProbeHTTPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeHTTPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring attributes applicable to HTTP and HTTPS probes. This table supports configuration of the probe attributes in addition to the HTTP attributes configured in cslbxProbeCfgTable. Following objects from cslbxProbeCfgTable are applicable to HTTP/HTTPS probe: cslbxProbeAlternateDestAddrType cslbxProbeAlternateDestAddr cslbxProbeRouteMethod cslbxProbeHttpRequestMethod cslbxProbeHttpRequestUrl cslbxProbePort cslbxProbeUserName cslbxProbePassword cslbxProbeInterval cslbxProbeRetries cslbxProbeFailedInterval cslbxProbeReceiveTimeout cslbxProbeTcpOpenTimeout cslbxProbeConnTermination cslbxProbePriority cslbxProbePassCount An HTTP probe establishes an HTTP connection to a real server and then sends an HTTP request and verifies the response. This table is applicable only for the instance value of cslbxProbeType 'httpProbe' or 'httpsProbe'." ::= { cslbxServerProbes 5 } cslbxProbeHTTPCfgEntry OBJECT-TYPE SYNTAX CslbxProbeHTTPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in HTTP Probe configuration table. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'httpProbe' or 'httpsProbe'. An entry is deleted from this table when corresponding entry (identified by the indices) is deleted from cslbxProbeCfgTable. Following objects are applicable to both HTTP and HTTPS Probes: cslbxProbeHTTPCfgVersion cslbxProbeHTTPCfgPersistence cslbxProbeHTTPCfgHashValid cslbxProbeHTTPCfgHashName Following objects are applicable only for HTTPS Probes: cslbxProbeHTTPCfgCipherSuite cslbxProbeHTTPCfgSslTlsVersion cslbxProbeHTTPCfgSslSessionReuse. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'httpProbe' or 'httpsProbe'." INDEX { slbEntity, cslbxProbeName } ::= { cslbxProbeHTTPCfgTable 1 } CslbxProbeHTTPCfgEntry ::= SEQUENCE { cslbxProbeHTTPCfgVersion INTEGER, cslbxProbeHTTPCfgPersistence TruthValue, cslbxProbeHTTPCfgHashValid TruthValue, cslbxProbeHTTPCfgHashName SnmpAdminString, cslbxProbeHTTPCfgCipherSuite INTEGER, cslbxProbeHTTPCfgSslTlsVersion INTEGER, cslbxProbeHTTPCfgSslSessionReuse TruthValue, cslbxProbeHTTPSslTlsVersionSupported BITS } cslbxProbeHTTPCfgVersion OBJECT-TYPE SYNTAX INTEGER { httpOneDotZero(1), httpOneDotOne(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents HTTP version for the probe. The 'htpOneDotZero' specifies HTTP 1.0 protocol. The 'htpOneDotOne' specifies HTTP 1.1 protocol." REFERENCE "RFC 1945 - Hypertext Transfer Protocol - HTTP/1.0 RFC 2616 - Hypertext Transfer Protocol - HTTP/1.1." DEFVAL { httpOneDotOne } ::= { cslbxProbeHTTPCfgEntry 1 } cslbxProbeHTTPCfgPersistence OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables persistence for HTTP(for both 1.0 and 1.1) probes. The pure HTTP/1.0 requires that a seperate TCP connection to be opened for each downloaded object. The persistence allows TCP connections to be re-used while requesting multiple objects without incurring a overhead of opening a new TCP connection." DEFVAL { false } ::= { cslbxProbeHTTPCfgEntry 2 } cslbxProbeHTTPCfgHashValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables the hash functionality. If set to 'true', the cslbxProbeHTTPCfgHashName is used. If set 'false' the value specified in cslbxProbeHTTPCfgHashName is not used." DEFVAL { false } ::= { cslbxProbeHTTPCfgEntry 3 } cslbxProbeHTTPCfgHashName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the hash value for the probe." ::= { cslbxProbeHTTPCfgEntry 4 } cslbxProbeHTTPCfgCipherSuite OBJECT-TYPE SYNTAX INTEGER { rsaOther(1), rsaAny(2), rsaWithRc4128Md5(3), rsaWithRc4128Sha(4), rsaWithdesCbcSha(5), rsaWith3desEdeCbcSha(6), rsaExportWithRc440Md5(7), rsaExportWithDes40CbcSha(8), rsaExport1024WithRc456Md5(9), rsaExport1024WithDesCbcSha(10), rsaExport1024WithRc456Sha(11), rsaWithAes128CbcSha(12), rsaWithAes256cbcSha(13) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents SSL Cipher suites to be used for HTTPS probes. The value 'rsa_any' is used for selecting a random cipher. The value 'rsaOther' specifies value other than those defined in the object. This value can not be written." REFERENCE "RFC 2246 - TLS Protocol version 1.0." DEFVAL { rsaOther } ::= { cslbxProbeHTTPCfgEntry 5 } cslbxProbeHTTPCfgSslTlsVersion OBJECT-TYPE SYNTAX INTEGER { other(1), sslv2(2), sslv3(3), tlsv1(4), all(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the version of the SSL/TLS protocol. The possible value(s) are : other : Version not applicable. This value can not be set by the user. sslv2 : SSL Version 2.0. sslv3 : SSL Version 3.0. tlsv1 : TLS Version 1.0. all : All supported versions as reported in cslbxProbeHTTPSslTlsVersionSupported object." REFERENCE "RFC 2246 - The TLS Protocol Version 1.0." DEFVAL { sslv3 } ::= { cslbxProbeHTTPCfgEntry 6 } cslbxProbeHTTPCfgSslSessionReuse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables reusing of the SSL Session ID. If set to 'true', SSL session ID will be reused. If set to 'false', SSL session ID will not be reused. In SSL, a new session ID is created every time the client and the SSL module go through a full key exchange and establish a new master secret key. Enabling this object allows the SSL module to reuse the master key on subsequent connections with the client, which can speed up the SSL negotiation process." ::= { cslbxProbeHTTPCfgEntry 7 } cslbxProbeHTTPSslTlsVersionSupported OBJECT-TYPE SYNTAX BITS { sslv3(0), tlsv1(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the supported SSL/TLS versions. sslv3 - SSL version 3.0. tlsv1 - TLS version 1.0." ::= { cslbxProbeHTTPCfgEntry 8 } -- ************************************************************* -- * * -- * SIP Probe Table * -- * * -- ************************************************************* cslbxProbeSIPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeSIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring attributes applicable to SIP probes. The Session Initiation Protocol (SIP) is an ASCII-based, application-layer control protocol that can be used to establish, maintain, and terminate calls between two or more endpoints. SIP is an alternative protocol developed by the Internet Engineering Task Force (IETF) for multimedia conferencing over IP. This table supports configuration of the probe attributes in addition to the attributes configured in cslbxProbeCfgTable. Following objects from cslbxProbeCfgTable are applicable to SIP probe: cslbxProbeAlternateDestAddrType cslbxProbeAlternateDestAddr cslbxProbeRouteMethod cslbxProbePort cslbxProbeUserName cslbxProbePassword cslbxProbeInterval cslbxProbeRetries cslbxProbeFailedInterval cslbxProbeReceiveTimeout cslbxProbeTcpOpenTimeout cslbxProbeConnTermination cslbxProbeSocketReuse cslbxProbePassCount This table is applicable only if the value of cslbxProbeType is 'sipProbe'." ::= { cslbxServerProbes 6 } cslbxProbeSIPCfgEntry OBJECT-TYPE SYNTAX CslbxProbeSIPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in SIP Probe configuration table. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'sipProbe'. An entry is deleted from this table when corresponding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'sipProbe'." INDEX { slbEntity, cslbxProbeName } ::= { cslbxProbeSIPCfgTable 1 } CslbxProbeSIPCfgEntry ::= SEQUENCE { cslbxProbeSIPRegAddress SnmpAdminString } cslbxProbeSIPRegAddress OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Registration address used in SIP protocol. Users in a SIP network are identified by unique SIP addresses. A SIP address is similar to an e-mail address and is in the format of 'sip:userID@gateway.com'. The userID can be either a user name or an E.164 address. An E.164 address is a telephone number with a string of decimal digits that uniquely indicates the public network termination point. The number contains the information necessary to route the call to this termination point." DEFVAL { "" } ::= { cslbxProbeSIPCfgEntry 1 } -- ************************************************************* -- * * -- * FTP Probe Table * -- * * -- ************************************************************* cslbxProbeFTPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeFTPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring attributes applicable to FTP probes. This table supports configuration of the probe attributes in addition to the FTP attributes configured in cslbxProbeCfgTable. Following objects from cslbxProbeCfgTable are applicable to FTP probe: cslbxProbeAlternateDestAddrType cslbxProbeAlternateDestAddr cslbxProbeRouteMethod cslbxProbePort cslbxProbeUserName cslbxProbePassword cslbxProbeInterval cslbxProbeRetries cslbxProbeFailedInterval cslbxProbeReceiveTimeout cslbxProbeTcpOpenTimeout cslbxProbeConnTermination cslbxProbeSocketReuse cslbxProbePassCount This table is applicable only if the value of cslbxProbeType is 'ftpProbe'." ::= { cslbxServerProbes 7 } cslbxProbeFTPCfgEntry OBJECT-TYPE SYNTAX CslbxProbeFTPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in FTP Probe configuration table. Each entry represents the FTP request, File name and File type. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'ftpProbe'. An entry is deleted from this table when corresponding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'ftpProbe'." INDEX { slbEntity, cslbxProbeName } ::= { cslbxProbeFTPCfgTable 1 } CslbxProbeFTPCfgEntry ::= SEQUENCE { cslbxProbeFtpRequestMethod INTEGER, cslbxProbeFtpRequestFileName SlbUrlString, cslbxProbeFtpRequestFileType INTEGER } cslbxProbeFtpRequestMethod OBJECT-TYPE SYNTAX INTEGER { other(1), ls(2), get(3), put(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the FTP request to be used in FTP probe packets. The possible value(s) are: other : other than the values mentioned below. This value can not be written. ls : list files. get : Get request. put : Put request." DEFVAL { get } ::= { cslbxProbeFTPCfgEntry 1 } cslbxProbeFtpRequestFileName OBJECT-TYPE SYNTAX SlbUrlString MAX-ACCESS read-write STATUS current DESCRIPTION "The string representing the File Name used in FTP Probe." DEFVAL { "" } ::= { cslbxProbeFTPCfgEntry 2 } cslbxProbeFtpRequestFileType OBJECT-TYPE SYNTAX INTEGER { ascii(1), binary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of the data transferred from/to in case of FTP requests." DEFVAL { ascii } ::= { cslbxProbeFTPCfgEntry 3 } -- ************************************************************* -- * * -- * TFTP Probe Table * -- * * -- ************************************************************* cslbxProbeTFTPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeTFTPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring attributes applicable to TFTP probes. This table supports configuration of the probe attributes in addition to the TFTP attributes configured in cslbxProbeCfgTable. Following objects from cslbxProbeCfgTable are applicable to TFTP probe: cslbxProbeAlternateDestAddrType cslbxProbeAlternateDestAddr cslbxProbePort cslbxProbeInterval cslbxProbeRetries cslbxProbeFailedInterval cslbxProbePassCount This table is applicable only if the value of cslbxProbeType is 'tftpProbe'." ::= { cslbxServerProbes 8 } cslbxProbeTFTPCfgEntry OBJECT-TYPE SYNTAX CslbxProbeTFTPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in TFTP Probe configuration table. Each entry represents the TFTP probe related parameters. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'tftpProbe'. An entry is deleted from this table when correspnding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'tftpProbe'." INDEX { slbEntity, cslbxProbeName } ::= { cslbxProbeTFTPCfgTable 1 } CslbxProbeTFTPCfgEntry ::= SEQUENCE { cslbxProbeTftpRequestMethod INTEGER, cslbxProbeTftpRequestFileName SlbUrlString, cslbxProbeTftpRequestFileType INTEGER } cslbxProbeTftpRequestMethod OBJECT-TYPE SYNTAX INTEGER { get(1), put(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the TFTP request to be used in TFTP probe packets. The possible value(s) are: get : Get request. put : Put request." DEFVAL { get } ::= { cslbxProbeTFTPCfgEntry 1 } cslbxProbeTftpRequestFileName OBJECT-TYPE SYNTAX SlbUrlString MAX-ACCESS read-write STATUS current DESCRIPTION "The string representing the File Name used in TFTP Probe." DEFVAL { "" } ::= { cslbxProbeTFTPCfgEntry 2 } cslbxProbeTftpRequestFileType OBJECT-TYPE SYNTAX INTEGER { ascii(1), binary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of the data transferred from/to in case of FTP requests." DEFVAL { ascii } ::= { cslbxProbeTFTPCfgEntry 3 } -- ************************************************************* -- * * -- * IMAP Probe Table * -- * * -- ************************************************************* cslbxProbeIMAPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CslbxProbeIMAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is for configuring attributes applicable to IMAP probe. This table supports configuration of the probe attributes in addition to the IMAP attributes configured in cslbxProbeCfgTable. Following objects from cslbxProbeCfgTable are applicable to IMAP probe: cslbxProbeAlternateDestAddrType cslbxProbeAlternateDestAddr cslbxProbeRouteMethod cslbxProbePort cslbxProbeUserName cslbxProbePassword cslbxProbeInterval cslbxProbeRetries cslbxProbeFailedInterval cslbxProbeReceiveTimeout cslbxProbeConnTermination cslbxProbePriority cslbxProbePassCount An IMAP probe initiates a IMAP session and then attempts to retrieve e-mail from the server and verifies the response. This table is applicable only if the value of cslbxProbeType is 'imapProbe'." ::= { cslbxServerProbes 9 } cslbxProbeIMAPCfgEntry OBJECT-TYPE SYNTAX CslbxProbeIMAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in IMAP Probe configuration table. Each entry represents the IMAP probe related parameters. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'imapProbe'. An entry is deleted from this table when corresponding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'imapProbe'." INDEX { slbEntity, cslbxProbeName } ::= { cslbxProbeIMAPCfgTable 1 } CslbxProbeIMAPCfgEntry ::= SEQUENCE { cslbxProbeIMAPMailBox SnmpAdminString, cslbxProbeIMAPMethodName SnmpAdminString } cslbxProbeIMAPMailBox OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for configuring the IMAP Mailbox value." REFERENCE "RFC 1730 Section 5.1 Mailbox Naming." DEFVAL { "" } ::= { cslbxProbeIMAPCfgEntry 1 } cslbxProbeIMAPMethodName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for configuring the IMAP method. The value can be any IMAP method. Some of the example(s) are: FETCH, NOOP, STAT, RETR" REFERENCE "RFC 1730 Section 6.1 Client commands - Any State. RFC 1730 Section 6.4 Client commands - Selected State." DEFVAL { "" } ::= { cslbxProbeIMAPCfgEntry 2 } ciscoSlbHealthMonMIBNotifs OBJECT IDENTIFIER ::= { ciscoSlbHealthMonMIB 0 } ciscoSlbHealthMonMIBObjects OBJECT IDENTIFIER ::= { ciscoSlbHealthMonMIB 1 } cshMonSfarmProbes OBJECT IDENTIFIER ::= { ciscoSlbHealthMonMIBObjects 1 } ciscoSlbHealthMonMIBConformance OBJECT IDENTIFIER ::= { ciscoSlbHealthMonMIB 2 } ciscoSlbHealthMonNotifObjects OBJECT IDENTIFIER ::= { ciscoSlbHealthMonMIBObjects 2 } -- Conformance Information ciscoSlbHealthMonMIBCompliances OBJECT IDENTIFIER ::= { ciscoSlbHealthMonMIBConformance 1 } ciscoSlbHealthMonMIBGroups OBJECT IDENTIFIER ::= { ciscoSlbHealthMonMIBConformance 2 } SlbProbeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The probe type for probing the health of a server. 'icmpProbe' : Probe server by sending ICMP echo requests. 'tcpProbe' : Probe server by opening TCP connections. TCP probe establishes and removes connections. 'dnsProbe' : Probe server by sending DNS queries. A DNS probe sends a domain name resolve request to the real server and verifies the returned IP address. 'httpProbe' : Probe server by sending HTTP requests. An HTTP probe establishes and HTTP connection to a real server and then sends an HTTP request and verifies the response. 'ftpProbe' : Probe server by opening FTP connections. An FTP probe establishes a connection to the real server and verifies that a greeting from the application was received. 'telnetProbe' : Probe server by opening Telnet connections. A Telnet probe establishes a connection to the real server and verifies that a greeting from the application was received. 'smtpProbe' : Probe server by opening SMTP connections. An SMTP probe establishes a connection to the real server and verifies that a greeting from the application was received. 'scriptedProbe' : Probe server by executable script. 'undefined' : New probe type not yet defined. 'udpProbe' : Probe server by opening UDP ports. 'httpsProbe' : Probe server by sending HTTPS requests. 'ldapProbe' : Probe server by connecting to LDAP server. 'popProbe' : Probe server by initiating POP/POP3 session. 'imapProbe' : Probe server by initiating IMAP session. 'radiusProbe' : Probe server by connecting to RADIUS server. 'tacacsProbe' : Probe server by connecting to TACACS server. 'sipProbe' : Probe server by sending SIP Commands. 'tftpProbe' : Probe server by sending tftp requests. 'fingerProbe' : Probe server by sending the command and waiting for the response. 'echoProbe' : Probe server by sending the data and response back. 'rtspProbe' : Probe server by sending the RTSP requests. 'snmpProbe' : Probe server by sending the SNMP requests." SYNTAX INTEGER { icmpProbe(1), tcpProbe(2), dnsProbe(3), httpProbe(4), ftpProbe(5), telnetProbe(6), smtpProbe(7), scriptedProbe(8), undefined(9), udpProbe(10), httpsProbe(11), ldapProbe(12), popProbe(13), imapProbe(14), radiusProbe(15), tacacsProbe(16), sipProbe(17), tftpProbe(18), fingerProbe(19), echoProbe(20), rtspProbe(21), snmpProbe(22) } CiscoProbeHealthMonState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The health monitor state of the probe for a server. The possible values are : 'other' : The health monitor state of the probe when none of the other values apply. 'invalid' : Server is not being monitored. Although user has tried to associate the probe to the server, but due to some internal problem it is actually not associated. 'init' : server is configured but not tested. 'active' : server is active. All expected responses received. 'failed' : probe has failed as expected responses have failed beyond acceptable limits. 'disabled' : probe disabled due to server being outofservice or no valid ip address configured to server." SYNTAX INTEGER { other(1), invalid(2), init(3), active(4), failed(5), disabled(6) } CiscoProbeInheritedPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of the inheritance for the probe port. The possible values are : 'other' : The inherited port when none of the other values apply. 'probe' : The inherited port is the probe's configured port. 'real' : The inherited port is the port of the real server to which the probe is associated. 'vip' : The inherited port is the port of the virtual ip address. 'default' : The inherited port is the probe's default port." SYNTAX INTEGER { other(1), probe(2), real(3), vip(4), default(5) } cshMonSfarmRealProbeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CshMonSfarmRealProbeStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table provides the statistics of a probe applied to a real server. This will address probes configured under a serverfarm and also under a real server. Deprecated because of the change in index requirement." ::= { cshMonSfarmProbes 1 } cshMonSfarmRealProbeStatsEntry OBJECT-TYPE SYNTAX CshMonSfarmRealProbeStatsEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry provides the probe related stats for a real server. In the following cases one or more entries get created: 1. An entry gets created when an entry is created in the cesRealServerProbeTable. 2. When an entry is created in cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName), then entries are created in this table with as many entries in cesServerFarmRserverTable (identified by INDEX slbServerFarmName) for the same server farm. 3. When an entry is created in cesServerFarmRserverTable (identified by INDEX slbServerFarmName), then entries are created in this table with as many entries in cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName) for the same server farm. In the following cases one or more entries get deleted: 1. An entry gets deleted when an entry is deleted from the cesRealServerProbeTable. 2. When an entry is deleted from cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName), then entries are deleted from this table with as many entries in cesServerFarmRserverTable (identified by INDEX slbServerFarmName) for the same server farm. 3. When an entry is deleted from cesServerFarmRserverTable (identified by INDEX slbServerFarmName), then entries are deleted from this table with as many entries in cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName) for the same server farm." REFERENCE "cesRealServerProbeTable and cesServerFarmRserverTable are defined in CISCO-ENHANCED-SLB-MIB. cslbxServerFarmProbeTable is defined in CISCO-SLB-EXT-MIB." INDEX { slbEntity, cslbxProbeName, slbServerFarmName, cshMonSfarmRealServerName, cshMonSfarmRealServerPort } ::= { cshMonSfarmRealProbeStatsTable 1 } CshMonSfarmRealProbeStatsEntry ::= SEQUENCE { cshMonSfarmRealServerName SnmpAdminString, cshMonSfarmRealServerPort InetPortNumber, cshMonSfarmRealProbesPassed Counter32, cshMonSfarmRealProbesFailed Counter32, cshMonSfarmRealProbeHealthMonState CiscoProbeHealthMonState } cshMonSfarmRealServerName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..255)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object identifies the name (unique identifier) of the real server. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesRserverName) or cesRealServerProbeTable (identified by INDEX cesRserverName)." REFERENCE "cesServerFarmRserverTable and cesRealServerProbeTable are defined in CISCO-ENHANCED-SLB-MIB." ::= { cshMonSfarmRealProbeStatsEntry 1 } cshMonSfarmRealServerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The port number of the real server. The value zero specifies that port number is not used in conjunction with real server IP Address. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesServerFarmRserverPort) or cesRealServerProbeTable (identified by INDEX cesServerFarmRserverPort)." REFERENCE "cesServerFarmRserverTable and cesRealServerProbeTable are defined in CISCO-ENHANCED-SLB-MIB." ::= { cshMonSfarmRealProbeStatsEntry 2 } cshMonSfarmRealProbesPassed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of probes passed for this real server. The probe is identified as pass if the real server returns a valid response." ::= { cshMonSfarmRealProbeStatsEntry 3 } cshMonSfarmRealProbesFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of probes failed for this real server. The probe is identified as failed if the real server fails to provide a valid response for a specified number of retries." ::= { cshMonSfarmRealProbeStatsEntry 4 } cshMonSfarmRealProbeHealthMonState OBJECT-TYPE SYNTAX CiscoProbeHealthMonState MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The health monitor state of the probe for this real server." DEFVAL { init } ::= { cshMonSfarmRealProbeStatsEntry 5 } cshMonProbeTypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CshMonProbeTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the accumulated statistics for each probe type." ::= { cshMonSfarmProbes 2 } cshMonProbeTypeStatsEntry OBJECT-TYPE SYNTAX CshMonProbeTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cshMonProbeTypeStatsTable. 1. The entries in the table are created when the system boots up. 2. There is no use case where the entries gets deleted. The 'slbEntity'is used in identifying the module in which configuration is applied. The 'cslbxProbeType' identifies the type of the probe." INDEX { slbEntity, cslbxProbeType } ::= { cshMonProbeTypeStatsTable 1 } CshMonProbeTypeStatsEntry ::= SEQUENCE { cshMonProbeTotalSentProbes Counter32, cshMonProbeTotalPassedProbes Counter32, cshMonProbeTotalConnectionErrors Counter32, cshMonProbeTotalReceivedRSTs Counter32, cshMonProbeTotalReceiveTimeouts Counter32, cshMonProbeTotalSendFailures Counter32, cshMonProbeTotalFailedProbes Counter32, cshMonProbeTotalRefusedConns Counter32, cshMonProbeTotalOpenTimeouts Counter32, cshMonProbeTotalActiveSockets Counter32 } cshMonProbeTotalSentProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes sent to the real servers." ::= { cshMonProbeTypeStatsEntry 1 } cshMonProbeTotalPassedProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of passed probes. The probe is identified as pass if the real server returns a valid response." ::= { cshMonProbeTypeStatsEntry 2 } cshMonProbeTotalConnectionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes that received connection errors while trying to connect to the real server." ::= { cshMonProbeTypeStatsEntry 3 } cshMonProbeTotalReceivedRSTs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes that received TCP RST." ::= { cshMonProbeTypeStatsEntry 4 } cshMonProbeTotalReceiveTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes that suffered receive timeouts." ::= { cshMonProbeTypeStatsEntry 5 } cshMonProbeTotalSendFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes failed due to internal errors. Internal errors are unexpected errors during configuration, scheduling or processing a probe." ::= { cshMonProbeTypeStatsEntry 6 } cshMonProbeTotalFailedProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of failed probes. The probe is identified as failed if the real server fails to provide a valid response for a specified number of retries." ::= { cshMonProbeTypeStatsEntry 7 } cshMonProbeTotalRefusedConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes whose connections were refused by the real servers." ::= { cshMonProbeTypeStatsEntry 8 } cshMonProbeTotalOpenTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes that received timeout while trying to open a connection to the real server." ::= { cshMonProbeTypeStatsEntry 9 } cshMonProbeTotalActiveSockets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes that are currently using a socket in the system." ::= { cshMonProbeTypeStatsEntry 10 } cshMonServerfarmRealProbeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CshMonServerfarmRealProbeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the statistics of a probe applied to a real server. This will address probes configured under a serverfarm and also under a real server." ::= { cshMonSfarmProbes 3 } cshMonServerfarmRealProbeStatsEntry OBJECT-TYPE SYNTAX CshMonServerfarmRealProbeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry provides the probe related stats for a real server. Please refer to 'probe port inheritance' explained in this MODULE-IDENTITY description. In the following cases one or more entries get created: 1. When an entry is created in cesRealServerProbeTable, then an equal number of entries are created in this table for each inherited port associated with each probe instance. 2. When an entry is created in cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName), then entries are created in this table with as many entries in cesServerFarmRserverTable (identified by INDEX slbServerFarmName) for the same server farm multiplied by the number of inherited ports associated with each probe instance. 3. When an entry is created in cesServerFarmRserverTable (identified by INDEX slbServerFarmName), then entries are created in this table with as many entries in cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName) for the same server farm multiplied by the number of inherited ports associated with each probe instance. In the following cases one or more entries get deleted: 1. When an entry gets deleted from the cesRealServerProbeTable, then an equal number of entries are deleted in this table for each inherited port associated with each probe instance. 2. When an entry is deleted from cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName), then entries are deleted from this table with as many entries in cesServerFarmRserverTable (identified by INDEX slbServerFarmName) for the same server farm multiplied by the number of inherited ports associated with each probe instance. 3. When an entry is deleted from cesServerFarmRserverTable (identified by INDEX slbServerFarmName), then entries are deleted from this table with as many entries in cslbxServerFarmProbeTable (identified by INDEX cslbxServerFarmProbeFarmName) for the same server farm multiplied by the number of inherited ports associated with each probe instance." REFERENCE "cesRealServerProbeTable and cesServerFarmRserverTable are defined in CISCO-ENHANCED-SLB-MIB. cslbxServerFarmProbeTable is defined in CISCO-SLB-EXT-MIB." INDEX { slbEntity, cslbxProbeName, slbServerFarmName, cshMonServerfarmRealServerName, cshMonServerfarmRealServerPort, cshMonProbeInheritedPort } ::= { cshMonServerfarmRealProbeStatsTable 1 } CshMonServerfarmRealProbeStatsEntry ::= SEQUENCE { cshMonServerfarmRealServerName SnmpAdminString, cshMonServerfarmRealServerPort InetPortNumber, cshMonProbeInheritedPort InetPortNumber, cshMonServerfarmRealPassedProbes Counter32, cshMonServerfarmRealFailedProbes Counter32, cshMonServerfarmRealProbeHealthMonState CiscoProbeHealthMonState, cshMonServerfarmRealProbeLastProbeTime DateAndTime, cshMonServerfarmRealProbeLastActiveTime DateAndTime, cshMonServerfarmRealProbeLastFailedTime DateAndTime, cshMonProbeInheritedPortType CiscoProbeInheritedPortType } cshMonServerfarmRealServerName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..255)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the name (unique identifier) of the real server. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesRserverName) or cesRealServerProbeTable (identified by INDEX cesRserverName)." REFERENCE "cesServerFarmRserverTable and cesRealServerProbeTable are defined in CISCO-ENHANCED-SLB-MIB." ::= { cshMonServerfarmRealProbeStatsEntry 1 } cshMonServerfarmRealServerPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the port number of the real server. The value zero specifies that port number is not used in conjunction with real server ip address. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesServerFarmRserverPort) or cesRealServerProbeTable (identified by INDEX cesServerFarmRserverPort)." REFERENCE "cesServerFarmRserverTable and cesRealServerProbeTable are defined in CISCO-ENHANCED-SLB-MIB." ::= { cshMonServerfarmRealProbeStatsEntry 2 } cshMonProbeInheritedPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the port number which is inherited by the probe instance. Please refer to probe port inheritance concept explained in this MODULE-IDENTITY description." ::= { cshMonServerfarmRealProbeStatsEntry 3 } cshMonServerfarmRealPassedProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes passed for this real server. The probe is identified as pass if the real server returns a valid response." ::= { cshMonServerfarmRealProbeStatsEntry 4 } cshMonServerfarmRealFailedProbes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the number of probes failed for this real server. The probe is identified as failed if the real server fails to provide a valid response for a specified number of retries." ::= { cshMonServerfarmRealProbeStatsEntry 5 } cshMonServerfarmRealProbeHealthMonState OBJECT-TYPE SYNTAX CiscoProbeHealthMonState MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the health monitor state of the probe for this real server." DEFVAL { init } ::= { cshMonServerfarmRealProbeStatsEntry 6 } cshMonServerfarmRealProbeLastProbeTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the date and time of the last probe." ::= { cshMonServerfarmRealProbeStatsEntry 7 } cshMonServerfarmRealProbeLastActiveTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the last date and time that the probe's state transitioned to 'active'." ::= { cshMonServerfarmRealProbeStatsEntry 8 } cshMonServerfarmRealProbeLastFailedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the last date and time that the probes's state transitioned to 'failed'." ::= { cshMonServerfarmRealProbeStatsEntry 9 } cshMonProbeInheritedPortType OBJECT-TYPE SYNTAX CiscoProbeInheritedPortType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indentifies the type of the inherited port for this probe instance." DEFVAL { default } ::= { cshMonServerfarmRealProbeStatsEntry 10 } -- Notification related objects cshMonSocketOverusageCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object identifies the number of times the probes socket usage exceeded 90% in that minute." ::= { ciscoSlbHealthMonNotifObjects 1 } -- Notifications cshMonSocketOveruse NOTIFICATION-TYPE OBJECTS { cshMonSocketOverusageCount } STATUS current DESCRIPTION "The notification is generated when probes socket usage exceeds or equals 90% atleast 100 times in one minute. The object cshMonSocketOverusageCount represents the number of times the probes socket usage exceeded 90 percentage in that minute." ::= { ciscoSlbHealthMonMIBNotifs 1 } cshMonSocketNormalUse NOTIFICATION-TYPE OBJECTS { cshMonSocketOverusageCount } STATUS current DESCRIPTION "The notification is generated when the probes socket usage becomes normal i.e the socket usage does not exceed 90% 100 or more times in that minute and after cshMonSocketOveruse notification is generated. The object cshMonSocketOverusageCount represents the number of times the probes socket usage exceeded 90 percentage in that minute." ::= { ciscoSlbHealthMonMIBNotifs 2 } ciscoSlbHealthMonMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco SLB Health monitoring MIB." MODULE -- this module MANDATORY-GROUPS { cslbHealthMonServerProbesGroup, cslbHealthMonProbeCfgExtGroup } GROUP cslbHealthMonHTTPProbesCommmonGroup DESCRIPTION "This group is mandatory for the systems which support HTTP probes." GROUP cslbHealthMonHTTPSProbesGroup DESCRIPTION "This group is mandatory for the systems which support HTTPS probes." GROUP cslbHealthMonSIPProbesGroup DESCRIPTION "This group is mandatory for the systems which support SIP probes." GROUP cslbHealthMonFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support FTP probes." GROUP cslbHealthMonTFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support TFTP probes." GROUP cslbHealthMonIMAPProbesGroup DESCRIPTION "This group is mandatory for the systems which support IMAP probes." GROUP cslbHealthMonProbeScriptGroup DESCRIPTION "This group is madatory for the systems which support scripted probes." OBJECT cslbxProbeAlternateDestAddrType DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT cslbxProbeAlternateDestAddr DESCRIPTION "An implementation is only required to support IPv4 addresses." ::= { ciscoSlbHealthMonMIBCompliances 1 } ciscoSlbHealthMonMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco SLB Health monitoring MIB." MODULE -- this module MANDATORY-GROUPS { cslbHealthMonServerProbesGroup, cslbHealthMonProbeCfgExtGroup } GROUP cslbHealthMonHTTPProbesCommmonGroup DESCRIPTION "This group is mandatory for the systems which support HTTP probes." GROUP cslbHealthMonHTTPSProbesGroupRev1 DESCRIPTION "This group is mandatory for the systems which support HTTPS probes." GROUP cslbHealthMonSIPProbesGroup DESCRIPTION "This group is mandatory for the systems which support SIP probes." GROUP cslbHealthMonFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support FTP probes." GROUP cslbHealthMonTFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support TFTP probes." GROUP cslbHealthMonIMAPProbesGroup DESCRIPTION "This group is mandatory for the systems which support IMAP probes." GROUP cslbHealthMonProbeScriptGroup DESCRIPTION "This group is madatory for the systems which support scripted probes." OBJECT cslbxProbeAlternateDestAddrType DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT cslbxProbeAlternateDestAddr DESCRIPTION "An implementation is only required to support IPv4 addresses." ::= { ciscoSlbHealthMonMIBCompliances 2 } ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco SLB Health monitoring MIB." MODULE -- this module MANDATORY-GROUPS { cslbHealthMonServerProbesGroupRev1, cslbHealthMonProbeCfgExtGroup, cshMonSfarmrealserverProbeStatsGroup } GROUP cslbHealthMonHTTPProbesCommmonGroup DESCRIPTION "This group is mandatory for the systems which support HTTP probes." GROUP cslbHealthMonHTTPSProbesGroupRev1 DESCRIPTION "This group is mandatory for the systems which support HTTPS probes." GROUP cslbHealthMonSIPProbesGroup DESCRIPTION "This group is mandatory for the systems which support SIP probes." GROUP cslbHealthMonFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support FTP probes." GROUP cslbHealthMonTFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support TFTP probes." GROUP cslbHealthMonIMAPProbesGroup DESCRIPTION "This group is mandatory for the systems which support IMAP probes." GROUP cslbHealthMonProbeScriptGroup DESCRIPTION "This group is madatory for the systems which support scripted probes." OBJECT cslbxProbeAlternateDestAddrType DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT cslbxProbeAlternateDestAddr DESCRIPTION "An implementation is only required to support IPv4 addresses." ::= { ciscoSlbHealthMonMIBCompliances 3 } ciscoSlbHealthMonMIBComplianceRev3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco SLB Health monitoring MIB." MODULE -- this module MANDATORY-GROUPS { cslbHealthMonServerProbesGroupRev1, cslbHealthMonProbeCfgExtGroup, cshMonSfarmrealserverProbeStatsGroupRev1, cshMonProbeTypeStatsGroup } GROUP cslbHealthMonHTTPProbesCommmonGroup DESCRIPTION "This group is mandatory for the systems which support HTTP probes." GROUP cslbHealthMonHTTPSProbesGroupRev1 DESCRIPTION "This group is mandatory for the systems which support HTTPS probes." GROUP cslbHealthMonSIPProbesGroup DESCRIPTION "This group is mandatory for the systems which support SIP probes." GROUP cslbHealthMonFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support FTP probes." GROUP cslbHealthMonTFTPProbesGroup DESCRIPTION "This group is mandatory for the systems which support TFTP probes." GROUP cslbHealthMonIMAPProbesGroup DESCRIPTION "This group is mandatory for the systems which support IMAP probes." GROUP cslbHealthMonProbeScriptGroup DESCRIPTION "This group is madatory for the systems which support scripted probes." GROUP cshMonNotifObjectsGroup DESCRIPTION "This group is madatory for the systems which supports socket usage notification." GROUP cshMonNotifGroup DESCRIPTION "This group is madatory for the systems which supports socket usage notification." OBJECT cslbxProbeAlternateDestAddrType DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT cslbxProbeAlternateDestAddr DESCRIPTION "An implementation is only required to support IPv4 addresses." ::= { ciscoSlbHealthMonMIBCompliances 4 } cslbHealthMonServerProbesGroup OBJECT-GROUP OBJECTS { cslbxProbeType, cslbxProbeInterval, cslbxProbeRetries, cslbxProbeFailedInterval, cslbxProbeReceiveTimeout, cslbxProbeTcpOpenTimeout, cslbxProbeAlternateDestAddrType, cslbxProbeAlternateDestAddr, cslbxProbeDnsDomainName, cslbxProbeRowStatus, cslbxDnsProbeIpRowStatus, cslbxProbeExpectStatusMaxValue, cslbxProbeExpectStatusRowStatus, cslbxProbePort, cslbxProbeDescription, cslbxProbeProtocolType, cslbxProbeRouteMethod, cslbxProbePriority } STATUS deprecated DESCRIPTION "The second revision of the collection of SLB server health probe objects." ::= { ciscoSlbHealthMonMIBGroups 1 } cslbHealthMonProbeCfgExtGroup OBJECT-GROUP OBJECTS { cslbxProbeUserName, cslbxProbePassword, cslbxProbePassCount, cslbxProbeConnTermination, cslbxProbeSocketReuse, cslbxProbeSendDataType, cslbxProbeSendData } STATUS current DESCRIPTION "The collection of objects to configure probes in an SLB device." ::= { ciscoSlbHealthMonMIBGroups 2 } cslbHealthMonSIPProbesGroup OBJECT-GROUP OBJECTS { cslbxProbeSIPRegAddress } STATUS current DESCRIPTION "A collection of objects providing information specific to SIP Probes." ::= { ciscoSlbHealthMonMIBGroups 3 } cslbHealthMonFTPProbesGroup OBJECT-GROUP OBJECTS { cslbxProbeFtpRequestMethod, cslbxProbeFtpRequestFileName, cslbxProbeFtpRequestFileType } STATUS current DESCRIPTION "A collection of objects providing information specific to FTP Probes." ::= { ciscoSlbHealthMonMIBGroups 4 } cslbHealthMonHTTPProbesCommmonGroup OBJECT-GROUP OBJECTS { cslbxProbeHttpRequestMethod, cslbxProbeHttpRequestUrl, cslbxProbeHeaderFieldValue, cslbxProbeHeaderRowStatus, cslbxProbeHTTPCfgVersion, cslbxProbeHTTPCfgPersistence, cslbxProbeHTTPCfgHashValid, cslbxProbeHTTPCfgHashName } STATUS current DESCRIPTION "A collection of objects providing information specific to both HTTP and HTTPS Probes." ::= { ciscoSlbHealthMonMIBGroups 5 } cslbHealthMonHTTPSProbesGroup OBJECT-GROUP OBJECTS { cslbxProbeHTTPCfgCipherSuite, cslbxProbeHTTPCfgSslTlsVersion, cslbxProbeHTTPCfgSslSessionReuse } STATUS deprecated DESCRIPTION "A collection of objects providing information specific to HTTPS Probes." ::= { ciscoSlbHealthMonMIBGroups 6 } cslbHealthMonTFTPProbesGroup OBJECT-GROUP OBJECTS { cslbxProbeTftpRequestMethod, cslbxProbeTftpRequestFileName, cslbxProbeTftpRequestFileType } STATUS current DESCRIPTION "A collection of objects providing information specific to TFTP Probes." ::= { ciscoSlbHealthMonMIBGroups 7 } cslbHealthMonIMAPProbesGroup OBJECT-GROUP OBJECTS { cslbxProbeIMAPMailBox, cslbxProbeIMAPMethodName } STATUS current DESCRIPTION "A collection of objects providing information specific to IMAP Probes." ::= { ciscoSlbHealthMonMIBGroups 8 } cslbHealthMonProbeScriptGroup OBJECT-GROUP OBJECTS { cslbxProbeScriptName, cslbxProbeScriptArguments } STATUS current DESCRIPTION "The collection of objects to configure scripted probes in an SLB device." ::= { ciscoSlbHealthMonMIBGroups 9 } cslbHealthMonHTTPSProbesGroupRev1 OBJECT-GROUP OBJECTS { cslbxProbeHTTPCfgCipherSuite, cslbxProbeHTTPCfgSslTlsVersion, cslbxProbeHTTPCfgSslSessionReuse, cslbxProbeHTTPSslTlsVersionSupported } STATUS current DESCRIPTION "A collection of objects providing information specific to HTTPS Probes." ::= { ciscoSlbHealthMonMIBGroups 10 } cslbHealthMonServerProbesGroupRev1 OBJECT-GROUP OBJECTS { cslbxProbeType, cslbxProbeInterval, cslbxProbeRetries, cslbxProbeFailedInterval, cslbxProbeReceiveTimeout, cslbxProbeTcpOpenTimeout, cslbxProbeAlternateDestAddrType, cslbxProbeAlternateDestAddr, cslbxProbeDnsDomainName, cslbxProbeRowStatus, cslbxDnsProbeIpRowStatus, cslbxProbeExpectStatusMaxValue, cslbxProbeExpectStatusRowStatus, cslbxProbePort, cslbxProbeDescription, cslbxProbeProtocolType, cslbxProbeRouteMethod, cslbxProbePriority, cslbxProbeState } STATUS current DESCRIPTION "The third revision of the collection of SLB server health probe objects." ::= { ciscoSlbHealthMonMIBGroups 11 } cshMonSfarmrealserverProbeStatsGroup OBJECT-GROUP OBJECTS { cshMonSfarmRealProbesPassed, cshMonSfarmRealProbesFailed, cshMonSfarmRealProbeHealthMonState } STATUS deprecated DESCRIPTION "Group of objects providing statistics of a probe applied to a real server." ::= { ciscoSlbHealthMonMIBGroups 12 } cshMonSfarmrealserverProbeStatsGroupRev1 OBJECT-GROUP OBJECTS { cshMonServerfarmRealPassedProbes, cshMonServerfarmRealFailedProbes, cshMonServerfarmRealProbeHealthMonState, cshMonServerfarmRealProbeLastProbeTime, cshMonServerfarmRealProbeLastActiveTime, cshMonServerfarmRealProbeLastFailedTime, cshMonProbeInheritedPortType } STATUS current DESCRIPTION "Group of objects providing statistics of a probe applied to a real server." ::= { ciscoSlbHealthMonMIBGroups 13 } cshMonProbeTypeStatsGroup OBJECT-GROUP OBJECTS { cshMonProbeTotalSentProbes, cshMonProbeTotalPassedProbes, cshMonProbeTotalConnectionErrors, cshMonProbeTotalReceivedRSTs, cshMonProbeTotalReceiveTimeouts, cshMonProbeTotalSendFailures, cshMonProbeTotalFailedProbes, cshMonProbeTotalRefusedConns, cshMonProbeTotalOpenTimeouts, cshMonProbeTotalActiveSockets } STATUS current DESCRIPTION "Group of objects providing statistics per probe type." ::= { ciscoSlbHealthMonMIBGroups 14 } cshMonNotifObjectsGroup OBJECT-GROUP OBJECTS { cshMonSocketOverusageCount } STATUS current DESCRIPTION "Group of notification objects." ::= { ciscoSlbHealthMonMIBGroups 15 } cshMonNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { cshMonSocketOveruse, cshMonSocketNormalUse } STATUS current DESCRIPTION "A collection of objects providing healthmon notifications." ::= { ciscoSlbHealthMonMIBGroups 16 } END