-- ***************************************************************** -- CISCO-SESS-BORDER-CTRLR-STATS-MIB.my -- -- Copyright (c) 2010 by cisco Systems Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-SESS-BORDER-CTRLR-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter64, Gauge32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB TEXTUAL-CONVENTION FROM SNMPv2-TC CiscoSbcPeriodicStatsInterval, csbCallStatsInstanceIndex, csbCallStatsServiceIndex FROM CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB ciscoMgmt FROM CISCO-SMI; ciscoSbcStatsMIB MODULE-IDENTITY LAST-UPDATED "201009150000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: sbc-dev@cisco.com" DESCRIPTION "The main purpose of this MIB is to define the statistics information for Session Border Controller application. This MIB categorizes the statistics information into following types: 1. RADIUS Messages Statistics - Represents statistics of various RADIUS messages for RADIUS servers with which the client (SBC) shares a secret. 2. Rf Billing Statistics- Represents Rf billing statistics information which monitors the messages sent per-realm over IMS Rx interface by Rf billing manager(SBC). 3. SIP Statistics - Represents SIP requests and various SIP responses on a SIP adjacency in a given interval. The Session Border Controller (SBC) enables direct IP-to-IP interconnect between multiple administrative domains for session-based services providing protocol inter-working, security, and admission control and management. The SBC is a voice over IP (VoIP) device that sits on the border of a network and controls call admission to that network. The primary purpose of an SBC is to protect the interior of the network from excessive call load and malicious traffic. Additional functions provided by the SBC include media bridging and billing services. Periodic Statistics - Represents the SBC call statistics information for a particular time interval. E.g. you can specify that you want to retrieve statistics for a summary period of the current or previous 5 minutes, 15 minutes, hour, or day. The statistics for 5 minutes are divided into five minute intervals past the hour - that is, at 0 minutes, 5 minutes, 10 minutes... past the hour. When you retrieve statistics for the current five minute period, you will be given statistics from the start of the interval to the current time. When you retrieve statistics for the previous five minutes, you will be given the statistics for the entirety of the previous interval. For example, if it is currently 12:43 - the current 5 minute statistics cover 12:40 - 12:43 - the previous 5 minute statistics cover 12:35 - 12:40 The other intervals work similarly. 15 minute statistics are divided into 15 minute intervals past the hour (0 minutes, 15 minutes, 30 minutes, 45 minutes). Hourly statistics are divided into intervals on the hour. Daily statistics are divided into intervals at 0:00 each day. Therefore, if you retrieve the statistics at 12:43 for each of these intervals, the periods covered are as follows. - current 15 minutes: 12:30 - 12:43 - previous 15 minutes: 12:15 - 12:30 - current hour: 12:00 - 12:43 - last hour: 11:00 - 12:00 - current day: 00:00 - 12:43 - last day: 00:00 (the day before) - 00:00. GLOSSARY SBC: Session Border Controller CSB: CISCO Session Border Controller Adjacency: An adjacency contains the system information to be transmitted to next HOP. ACR: Accounting Request ACA: Accounting Accept AVP: Attribute-Value Pairs REFERENCES 1. CISCO Session Border Controller Documents and FAQ http://zed.cisco.com/confluence/display/SBC/SBC" REVISION "201009150000Z" DESCRIPTION "Latest version of this MIB module." ::= { ciscoMgmt 757 } CiscoSbcSIPMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention represents the various SIP Methods." SYNTAX INTEGER { unknown(1), ack(2), bye(3), cancel(4), info(5), invite(6), message(7), notify(8), options(9), prack(10), refer(11), register(12), subscribe(13), update(14) } CiscoSbcRadiusClientType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention represents the type of RADIUS client." SYNTAX INTEGER { authentication(1), accounting(2) } ciscoSbcStatsMIBNotifs OBJECT IDENTIFIER ::= { ciscoSbcStatsMIB 0 } ciscoSbcStatsMIBObjects OBJECT IDENTIFIER ::= { ciscoSbcStatsMIB 1 } ciscoSbcStatsMIBConform OBJECT IDENTIFIER ::= { ciscoSbcStatsMIB 2 } csbRadiusStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CsbRadiusStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has the reporting statistics of various RADIUS messages for RADIUS servers with which the client (SBC) shares a secret. Each entry in this table is identified by a value of csbRadiusStatsEntIndex. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." ::= { ciscoSbcStatsMIBObjects 1 } csbRadiusStatsEntry OBJECT-TYPE SYNTAX CsbRadiusStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the csbRadiusStatsTable. There is an entry in this table for each RADIUS server, as identified by a value of csbRadiusStatsEntIndex. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." INDEX { csbCallStatsInstanceIndex, csbCallStatsServiceIndex, csbRadiusStatsEntIndex } ::= { csbRadiusStatsTable 1 } CsbRadiusStatsEntry ::= SEQUENCE { csbRadiusStatsEntIndex Unsigned32, csbRadiusStatsClientName SnmpAdminString, csbRadiusStatsClientType CiscoSbcRadiusClientType, csbRadiusStatsSrvrName SnmpAdminString, csbRadiusStatsAcsReqs Counter64, csbRadiusStatsAcsRtrns Counter64, csbRadiusStatsAcsAccpts Counter64, csbRadiusStatsAcsRejects Counter64, csbRadiusStatsAcsChalls Counter64, csbRadiusStatsActReqs Counter64, csbRadiusStatsActRetrans Counter64, csbRadiusStatsActRsps Counter64, csbRadiusStatsMalformedRsps Counter64, csbRadiusStatsBadAuths Counter64, csbRadiusStatsPending Gauge32, csbRadiusStatsTimeouts Counter64, csbRadiusStatsUnknownType Counter64, csbRadiusStatsDropped Counter64 } csbRadiusStatsEntIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the index of the RADIUS client entity that this server is configured on. This index is assigned arbitrarily by the engine and is not saved over reboots." ::= { csbRadiusStatsEntry 1 } csbRadiusStatsClientName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the client name of the RADIUS client to which that these statistics apply." ::= { csbRadiusStatsEntry 2 } csbRadiusStatsClientType OBJECT-TYPE SYNTAX CiscoSbcRadiusClientType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type(authentication or accounting) of the RADIUS clients configured on SBC." ::= { csbRadiusStatsEntry 3 } csbRadiusStatsSrvrName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the server name of the RADIUS server to which that these statistics apply." ::= { csbRadiusStatsEntry 4 } csbRadiusStatsAcsReqs OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Access-Request packets sent to this server. This does not include retransmissions." ::= { csbRadiusStatsEntry 5 } csbRadiusStatsAcsRtrns OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Access-Request packets retransmitted to this RADIUS server." ::= { csbRadiusStatsEntry 6 } csbRadiusStatsAcsAccpts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Access-Accept packets (valid or invalid) received from this server." ::= { csbRadiusStatsEntry 7 } csbRadiusStatsAcsRejects OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Access-Reject packets (valid or invalid) received from this server." ::= { csbRadiusStatsEntry 8 } csbRadiusStatsAcsChalls OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Access-Challenge packets (valid or invalid) received from this server." ::= { csbRadiusStatsEntry 9 } csbRadiusStatsActReqs OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Accounting-Request packets sent to this server. This does not include retransmissions." ::= { csbRadiusStatsEntry 10 } csbRadiusStatsActRetrans OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Accounting-Request packets retransmitted to this RADIUS server." ::= { csbRadiusStatsEntry 11 } csbRadiusStatsActRsps OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS Accounting-Response packets (valid or invalid) received from this server." ::= { csbRadiusStatsEntry 12 } csbRadiusStatsMalformedRsps OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of malformed RADIUS response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators, Signature attributes and unknown types are not included as malformed access responses." ::= { csbRadiusStatsEntry 13 } csbRadiusStatsBadAuths OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS response packets containing invalid authenticators or Signature attributes received from this server." ::= { csbRadiusStatsEntry 14 } csbRadiusStatsPending OBJECT-TYPE SYNTAX Gauge32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS request packets destined for this server that have not yet timed out or received a response. This variable is incremented when a request is sent and decremented on receipt of the response or on a timeout or retransmission." ::= { csbRadiusStatsEntry 15 } csbRadiusStatsTimeouts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS request timeouts to this server. After a timeout the client may retry to a different server or give up. A retry to a different server is counted as a request as well as a timeout." ::= { csbRadiusStatsEntry 16 } csbRadiusStatsUnknownType OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS packets of unknown type which were received from this server." ::= { csbRadiusStatsEntry 17 } csbRadiusStatsDropped OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of RADIUS packets which were received from this server and dropped for some other reason." ::= { csbRadiusStatsEntry 18 } csbRfBillRealmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CsbRfBillRealmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the Rf billing statistics information which monitors the messages sent per-realm by Rf billing manager(SBC). SBC sends Rf billing data using Diameter as a transport protocol. Rf billing uses only ACR and ACA Diameter messages for the transport of billing data. The Accounting-Record-Type AVP on the ACR message labels the type of the accounting request. The following types are used by Rf billing. 1. For session-based charging, the types Start (session begins), Interim (session is modified) and Stop (session ends) are used. 2. For event-based charging, the type Event is used when a chargeable event occurs outside the scope of a session. Each row of this table is identified by a value of csbRfBillRealmStatsIndex and csbRfBillRealmStatsRealmName. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." ::= { ciscoSbcStatsMIBObjects 2 } csbRfBillRealmStatsEntry OBJECT-TYPE SYNTAX CsbRfBillRealmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the csbRfBillRealmStatsTable. There is an entry in this table for each realm, as identified by a value of csbRfBillRealmStatsIndex and csbRfBillRealmStatsRealmName. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." INDEX { csbCallStatsInstanceIndex, csbCallStatsServiceIndex, csbRfBillRealmStatsIndex, csbRfBillRealmStatsRealmName } ::= { csbRfBillRealmStatsTable 1 } CsbRfBillRealmStatsEntry ::= SEQUENCE { csbRfBillRealmStatsIndex Unsigned32, csbRfBillRealmStatsRealmName SnmpAdminString, csbRfBillRealmStatsTotalStartAcrs Unsigned32, csbRfBillRealmStatsTotalInterimAcrs Unsigned32, csbRfBillRealmStatsTotalStopAcrs Unsigned32, csbRfBillRealmStatsTotalEventAcrs Unsigned32, csbRfBillRealmStatsSuccStartAcrs Unsigned32, csbRfBillRealmStatsSuccInterimAcrs Unsigned32, csbRfBillRealmStatsSuccStopAcrs Unsigned32, csbRfBillRealmStatsSuccEventAcrs Unsigned32, csbRfBillRealmStatsFailStartAcrs Unsigned32, csbRfBillRealmStatsFailInterimAcrs Unsigned32, csbRfBillRealmStatsFailStopAcrs Unsigned32, csbRfBillRealmStatsFailEventAcrs Unsigned32 } csbRfBillRealmStatsIndex OBJECT-TYPE SYNTAX Unsigned32 (0..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the billing method instance index. The range of valid values for this field is 0 - 31." ::= { csbRfBillRealmStatsEntry 1 } csbRfBillRealmStatsRealmName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the realm for which these statistics are collected. The length of this object is zero when value is not assigned to it." ::= { csbRfBillRealmStatsEntry 2 } csbRfBillRealmStatsTotalStartAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the combined sum of successful and failed Start ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 3 } csbRfBillRealmStatsTotalInterimAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the combined sum of successful and failed Interim ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 4 } csbRfBillRealmStatsTotalStopAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the combined sum of successful and failed Stop ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 5 } csbRfBillRealmStatsTotalEventAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the combined sum of successful and failed Event ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 6 } csbRfBillRealmStatsSuccStartAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of successful Start ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 7 } csbRfBillRealmStatsSuccInterimAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of successful Interim ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 8 } csbRfBillRealmStatsSuccStopAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of successful Stop ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 9 } csbRfBillRealmStatsSuccEventAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of successful Event ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 10 } csbRfBillRealmStatsFailStartAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of failed Start ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 11 } csbRfBillRealmStatsFailInterimAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of failed Interim ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 12 } csbRfBillRealmStatsFailStopAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of failed Stop ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 13 } csbRfBillRealmStatsFailEventAcrs OBJECT-TYPE SYNTAX Unsigned32 UNITS "ACRs" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of failed Event ACRs since start of day or the last time the statistics were reset." ::= { csbRfBillRealmStatsEntry 14 } csbSIPMthdCurrentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CsbSIPMthdCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table reports count of SIP request and various SIP responses for each SIP method on a SIP adjacency in a given interval. Each entry in this table represents a SIP method, its incoming and outgoing count, individual incoming and outgoing count of various SIP responses for this method on a SIP adjacency in a given interval. To understand the meaning of interval please refer section in description of ciscoSbcStatsMIB. This table is indexed on csbSIPMthdCurrentStatsAdjName, csbSIPMthdCurrentStatsMethod and csbSIPMthdCurrentStatsInterval. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." ::= { ciscoSbcStatsMIBObjects 3 } csbSIPMthdCurrentStatsEntry OBJECT-TYPE SYNTAX CsbSIPMthdCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the csbSIPMthdCurrentStatsTable. Each row describes a SIP method and various responses count for this method on a given SIP adjacency and given interval. This table is indexed on csbSIPMthdCurrentStatsAdjName, csbSIPMthdCurrentStatsMethod and csbSIPMthdCurrentStatsInterval. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." INDEX { csbCallStatsInstanceIndex, csbCallStatsServiceIndex, csbSIPMthdCurrentStatsAdjName, csbSIPMthdCurrentStatsMethod, csbSIPMthdCurrentStatsInterval } ::= { csbSIPMthdCurrentStatsTable 1 } CsbSIPMthdCurrentStatsEntry ::= SEQUENCE { csbSIPMthdCurrentStatsAdjName SnmpAdminString, csbSIPMthdCurrentStatsMethod CiscoSbcSIPMethod, csbSIPMthdCurrentStatsInterval CiscoSbcPeriodicStatsInterval, csbSIPMthdCurrentStatsMethodName SnmpAdminString, csbSIPMthdCurrentStatsReqIn Gauge32, csbSIPMthdCurrentStatsReqOut Gauge32, csbSIPMthdCurrentStatsResp1xxIn Gauge32, csbSIPMthdCurrentStatsResp1xxOut Gauge32, csbSIPMthdCurrentStatsResp2xxIn Gauge32, csbSIPMthdCurrentStatsResp2xxOut Gauge32, csbSIPMthdCurrentStatsResp3xxIn Gauge32, csbSIPMthdCurrentStatsResp3xxOut Gauge32, csbSIPMthdCurrentStatsResp4xxIn Gauge32, csbSIPMthdCurrentStatsResp4xxOut Gauge32, csbSIPMthdCurrentStatsResp5xxIn Gauge32, csbSIPMthdCurrentStatsResp5xxOut Gauge32, csbSIPMthdCurrentStatsResp6xxIn Gauge32, csbSIPMthdCurrentStatsResp6xxOut Gauge32 } csbSIPMthdCurrentStatsAdjName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the SIP adjacency for which stats related with SIP request and all kind of corresponding SIP responses are reported. The object acts as an index of the table." ::= { csbSIPMthdCurrentStatsEntry 1 } csbSIPMthdCurrentStatsMethod OBJECT-TYPE SYNTAX CiscoSbcSIPMethod MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the SIP method Request. The object acts as an index of the table." ::= { csbSIPMthdCurrentStatsEntry 2 } csbSIPMthdCurrentStatsInterval OBJECT-TYPE SYNTAX CiscoSbcPeriodicStatsInterval MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interval for which the periodic statistics information is to be displayed. The interval values can be 5 minutes, 15 minutes, 1 hour , 1 Day. This object acts as an index for the table." ::= { csbSIPMthdCurrentStatsEntry 3 } csbSIPMthdCurrentStatsMethodName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the text representation of the SIP method request. E.g. INVITE, ACK, BYE etc." ::= { csbSIPMthdCurrentStatsEntry 4 } csbSIPMthdCurrentStatsReqIn OBJECT-TYPE SYNTAX Gauge32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total incoming SIP message requests of this type on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 5 } csbSIPMthdCurrentStatsReqOut OBJECT-TYPE SYNTAX Gauge32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total outgoing SIP message requests of this type on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 6 } csbSIPMthdCurrentStatsResp1xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 1xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 7 } csbSIPMthdCurrentStatsResp1xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 1xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 8 } csbSIPMthdCurrentStatsResp2xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 2xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 9 } csbSIPMthdCurrentStatsResp2xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 2xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 10 } csbSIPMthdCurrentStatsResp3xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 3xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 11 } csbSIPMthdCurrentStatsResp3xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 3xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 12 } csbSIPMthdCurrentStatsResp4xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 4xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 13 } csbSIPMthdCurrentStatsResp4xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 4xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 14 } csbSIPMthdCurrentStatsResp5xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 5xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 15 } csbSIPMthdCurrentStatsResp5xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 5xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 16 } csbSIPMthdCurrentStatsResp6xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 6xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 17 } csbSIPMthdCurrentStatsResp6xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 6xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdCurrentStatsEntry 18 } csbSIPMthdHistoryStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CsbSIPMthdHistoryStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provide historical count of SIP request and various SIP responses for each SIP method on a SIP adjacency in various interval length defined by the csbSIPMthdHistoryStatsInterval object. Each entry in this table represents a SIP method, its incoming and outgoing count, individual incoming and outgoing count of various SIP responses for this method on a SIP adjacency in a given interval. The possible values of interval will be previous 5 minutes, previous 15 minutes, previous 1 hour and previous day. To understand the meaning of interval please refer description of ciscoSbcStatsMIB. This table is indexed on csbSIPMthdHistoryStatsAdjName, csbSIPMthdHistoryStatsMethod and csbSIPMthdHistoryStatsInterval. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." ::= { ciscoSbcStatsMIBObjects 4 } csbSIPMthdHistoryStatsEntry OBJECT-TYPE SYNTAX CsbSIPMthdHistoryStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the csbSIPMthdHistoryStatsTable. The entries in this table are updated as interval completes in the csbSIPMthdCurrentStatsTable table and the data is moved from that table to this one. This table is indexed on csbSIPMthdHistoryStatsAdjName, csbSIPMthdHistoryStatsMethod and csbSIPMthdHistoryStatsInterval. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." INDEX { csbCallStatsInstanceIndex, csbCallStatsServiceIndex, csbSIPMthdHistoryStatsAdjName, csbSIPMthdHistoryStatsMethod, csbSIPMthdHistoryStatsInterval } ::= { csbSIPMthdHistoryStatsTable 1 } CsbSIPMthdHistoryStatsEntry ::= SEQUENCE { csbSIPMthdHistoryStatsAdjName SnmpAdminString, csbSIPMthdHistoryStatsMethod CiscoSbcSIPMethod, csbSIPMthdHistoryStatsInterval CiscoSbcPeriodicStatsInterval, csbSIPMthdHistoryStatsMethodName SnmpAdminString, csbSIPMthdHistoryStatsReqIn Gauge32, csbSIPMthdHistoryStatsReqOut Gauge32, csbSIPMthdHistoryStatsResp1xxIn Gauge32, csbSIPMthdHistoryStatsResp1xxOut Gauge32, csbSIPMthdHistoryStatsResp2xxIn Gauge32, csbSIPMthdHistoryStatsResp2xxOut Gauge32, csbSIPMthdHistoryStatsResp3xxIn Gauge32, csbSIPMthdHistoryStatsResp3xxOut Gauge32, csbSIPMthdHistoryStatsResp4xxIn Gauge32, csbSIPMthdHistoryStatsResp4xxOut Gauge32, csbSIPMthdHistoryStatsResp5xxIn Gauge32, csbSIPMthdHistoryStatsResp5xxOut Gauge32, csbSIPMthdHistoryStatsResp6xxIn Gauge32, csbSIPMthdHistoryStatsResp6xxOut Gauge32 } csbSIPMthdHistoryStatsAdjName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the SIP adjacency for which stats related with SIP request and all kind of corresponding SIP responses are reported. The object acts as an index of the table." ::= { csbSIPMthdHistoryStatsEntry 1 } csbSIPMthdHistoryStatsMethod OBJECT-TYPE SYNTAX CiscoSbcSIPMethod MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the SIP method Request. The object acts as an index of the table." ::= { csbSIPMthdHistoryStatsEntry 2 } csbSIPMthdHistoryStatsInterval OBJECT-TYPE SYNTAX CiscoSbcPeriodicStatsInterval MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the interval for which the historical statistics information is to be displayed. The interval values can be previous 5 minutes, previous 15 minutes, previous 1 hour and previous 1 Day. This object acts as an index for the table." ::= { csbSIPMthdHistoryStatsEntry 3 } csbSIPMthdHistoryStatsMethodName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the text representation of the SIP method request. E.g. INVITE, ACK, BYE etc." ::= { csbSIPMthdHistoryStatsEntry 4 } csbSIPMthdHistoryStatsReqIn OBJECT-TYPE SYNTAX Gauge32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total incoming SIP message requests of this type on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 5 } csbSIPMthdHistoryStatsReqOut OBJECT-TYPE SYNTAX Gauge32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total outgoing SIP message requests of this type on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 6 } csbSIPMthdHistoryStatsResp1xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 1xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 7 } csbSIPMthdHistoryStatsResp1xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 1xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 8 } csbSIPMthdHistoryStatsResp2xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 2xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 9 } csbSIPMthdHistoryStatsResp2xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 2xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 10 } csbSIPMthdHistoryStatsResp3xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 3xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 11 } csbSIPMthdHistoryStatsResp3xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 3xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 12 } csbSIPMthdHistoryStatsResp4xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 4xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 13 } csbSIPMthdHistoryStatsResp4xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 4xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 14 } csbSIPMthdHistoryStatsResp5xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 5xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 15 } csbSIPMthdHistoryStatsResp5xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 5xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 16 } csbSIPMthdHistoryStatsResp6xxIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 6xx responses for this method received on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 17 } csbSIPMthdHistoryStatsResp6xxOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total 6xx responses for this method sent on this SIP adjacency." ::= { csbSIPMthdHistoryStatsEntry 18 } csbSIPMthdRCCurrentStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CsbSIPMthdRCCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table reports SIP method request and response code statistics for each method and response code combination on given SIP adjacency in a given interval. To understand the meaning of interval please refer section in description of ciscoSbcStatsMIB. An exact lookup will return a row only if - 1) detailed response code statistics are turned on in SBC 2) response code messages sent or received is non zero for given SIP adjacency, method and interval. Also an inexact lookup will only return rows for messages with non-zero counts, to protect the user from large numbers of rows for response codes which have not been received or sent." ::= { ciscoSbcStatsMIBObjects 5 } csbSIPMthdRCCurrentStatsEntry OBJECT-TYPE SYNTAX CsbSIPMthdRCCurrentStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the csbSIPMthdRCCurrentStatsTable. Each entry in this table represents a method and response code combination. Each entry in this table is identified by a value of csbSIPMthdRCCurrentStatsAdjName, csbSIPMthdRCCurrentStatsMethod, csbSIPMthdRCCurrentStatsRespCode and csbSIPMthdRCCurrentStatsInterval. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." INDEX { csbCallStatsInstanceIndex, csbCallStatsServiceIndex, csbSIPMthdRCCurrentStatsAdjName, csbSIPMthdRCCurrentStatsMethod, csbSIPMthdRCCurrentStatsRespCode, csbSIPMthdRCCurrentStatsInterval } ::= { csbSIPMthdRCCurrentStatsTable 1 } CsbSIPMthdRCCurrentStatsEntry ::= SEQUENCE { csbSIPMthdRCCurrentStatsAdjName SnmpAdminString, csbSIPMthdRCCurrentStatsMethod CiscoSbcSIPMethod, csbSIPMthdRCCurrentStatsRespCode Unsigned32, csbSIPMthdRCCurrentStatsInterval CiscoSbcPeriodicStatsInterval, csbSIPMthdRCCurrentStatsMethodName SnmpAdminString, csbSIPMthdRCCurrentStatsRespIn Gauge32, csbSIPMthdRCCurrentStatsRespOut Gauge32 } csbSIPMthdRCCurrentStatsAdjName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This identifies the name of the adjacency for which statistics are reported. This object acts as an index for the table." ::= { csbSIPMthdRCCurrentStatsEntry 1 } csbSIPMthdRCCurrentStatsMethod OBJECT-TYPE SYNTAX CiscoSbcSIPMethod MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the SIP method request. This object acts as an index for the table." ::= { csbSIPMthdRCCurrentStatsEntry 2 } csbSIPMthdRCCurrentStatsRespCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the response code for the SIP message request. The range of valid values for SIP response codes is 100 - 999. This object acts as an index for the table." ::= { csbSIPMthdRCCurrentStatsEntry 3 } csbSIPMthdRCCurrentStatsInterval OBJECT-TYPE SYNTAX CiscoSbcPeriodicStatsInterval MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the interval for which the periodic statistics information is to be displayed. The interval values can be 5 min, 15 mins, 1 hour , 1 Day. This object acts as an index for the table." ::= { csbSIPMthdRCCurrentStatsEntry 4 } csbSIPMthdRCCurrentStatsMethodName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the text representation of the SIP method request. E.g. INVITE, ACK, BYE etc." ::= { csbSIPMthdRCCurrentStatsEntry 5 } csbSIPMthdRCCurrentStatsRespIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total SIP messages with this response code this method received on this SIP adjacency." ::= { csbSIPMthdRCCurrentStatsEntry 6 } csbSIPMthdRCCurrentStatsRespOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total SIP messages with this response code for this method sent on this SIP adjacency." ::= { csbSIPMthdRCCurrentStatsEntry 7 } csbSIPMthdRCHistoryStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CsbSIPMthdRCHistoryStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table reports historical data for SIP method request and response code statistics for each method and response code combination in a given past interval. The possible values of interval will be previous 5 minutes, previous 15 minutes, previous 1 hour and previous day. To understand the meaning of interval please refer section in description of ciscoSbcStatsMIB. An exact lookup will return a row only if - 1) detailed response code statistics are turned on in SBC 2) response code messages sent or received is non zero for given SIP adjacency, method and interval. Also an inexact lookup will only return rows for messages with non-zero counts, to protect the user from large numbers of rows for response codes which have not been received or sent." ::= { ciscoSbcStatsMIBObjects 6 } csbSIPMthdRCHistoryStatsEntry OBJECT-TYPE SYNTAX CsbSIPMthdRCHistoryStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the csbSIPMthdRCHistoryStatsTable. The entries in this table are updated as interval completes in the csbSIPMthdRCCurrentStatsTable table and the data is moved from that table to this one. Each entry in this table is identified by a value of csbSIPMthdRCHistoryStatsAdjName, csbSIPMthdRCHistoryStatsMethod, csbSIPMthdRCHistoryStatsRespCode and csbSIPMthdRCHistoryStatsInterval. The other indices of this table are csbCallStatsInstanceIndex defined in csbCallStatsInstanceTable and csbCallStatsServiceIndex defined in csbCallStatsTable." INDEX { csbCallStatsInstanceIndex, csbCallStatsServiceIndex, csbSIPMthdRCHistoryStatsAdjName, csbSIPMthdRCHistoryStatsMethod, csbSIPMthdRCHistoryStatsRespCode, csbSIPMthdRCHistoryStatsInterval } ::= { csbSIPMthdRCHistoryStatsTable 1 } CsbSIPMthdRCHistoryStatsEntry ::= SEQUENCE { csbSIPMthdRCHistoryStatsAdjName SnmpAdminString, csbSIPMthdRCHistoryStatsMethod CiscoSbcSIPMethod, csbSIPMthdRCHistoryStatsMethodName SnmpAdminString, csbSIPMthdRCHistoryStatsRespCode Unsigned32, csbSIPMthdRCHistoryStatsInterval CiscoSbcPeriodicStatsInterval, csbSIPMthdRCHistoryStatsRespIn Gauge32, csbSIPMthdRCHistoryStatsRespOut Gauge32 } csbSIPMthdRCHistoryStatsAdjName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This identifies the name of the adjacency for which statistics are reported. This object acts as an index for the table." ::= { csbSIPMthdRCHistoryStatsEntry 1 } csbSIPMthdRCHistoryStatsMethod OBJECT-TYPE SYNTAX CiscoSbcSIPMethod MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the SIP method request. This object acts as an index for the table." ::= { csbSIPMthdRCHistoryStatsEntry 2 } csbSIPMthdRCHistoryStatsMethodName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the text representation of the SIP method request. E.g. INVITE, ACK, BYE etc." ::= { csbSIPMthdRCHistoryStatsEntry 3 } csbSIPMthdRCHistoryStatsRespCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the response code for the SIP message request. The range of valid values for SIP response codes is 100 - 999. This object acts as an index for the table." ::= { csbSIPMthdRCHistoryStatsEntry 4 } csbSIPMthdRCHistoryStatsInterval OBJECT-TYPE SYNTAX CiscoSbcPeriodicStatsInterval MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the interval for which the periodic statistics information is to be displayed. The interval values can be previous 5 min, previous 15 mins, previous 1 hour , previous 1 Day. This object acts as an index for the table." ::= { csbSIPMthdRCHistoryStatsEntry 5 } csbSIPMthdRCHistoryStatsRespIn OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total SIP messages with this response code this method received on this SIP adjacency." ::= { csbSIPMthdRCHistoryStatsEntry 6 } csbSIPMthdRCHistoryStatsRespOut OBJECT-TYPE SYNTAX Gauge32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total SIP messages with this response code for this method sent on this SIP adjacency." ::= { csbSIPMthdRCHistoryStatsEntry 7 } csbStatsMIBCompliances OBJECT IDENTIFIER ::= { ciscoSbcStatsMIBConform 1 } csbStatsMIBGroups OBJECT IDENTIFIER ::= { ciscoSbcStatsMIBConform 2 } csbStatsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "This is a default module-compliance containing csbStatsMIBGroups." MODULE -- this module MANDATORY-GROUPS { csbRadiusStatsGroup, csbRfBillRealmStatsGroup, csbSIPMthdCurrentStatsGroup, csbSIPMthdHistoryStatsGroup, csbSIPMthdRCHistoryStatsGroup, csbSIPMthdRCCurrentStatsGroup } ::= { csbStatsMIBCompliances 1 } -- Units of Conformance csbRadiusStatsGroup OBJECT-GROUP OBJECTS { csbRadiusStatsClientName, csbRadiusStatsClientType, csbRadiusStatsSrvrName, csbRadiusStatsAcsReqs, csbRadiusStatsAcsRtrns, csbRadiusStatsAcsAccpts, csbRadiusStatsAcsRejects, csbRadiusStatsAcsChalls, csbRadiusStatsActReqs, csbRadiusStatsActRetrans, csbRadiusStatsActRsps, csbRadiusStatsMalformedRsps, csbRadiusStatsBadAuths, csbRadiusStatsPending, csbRadiusStatsTimeouts, csbRadiusStatsUnknownType, csbRadiusStatsDropped } STATUS current DESCRIPTION "A collection of objects providing RADIUS messages statistics for configured RADIUS servers on Cisco Session Border Controller (SBC)." ::= { csbStatsMIBGroups 1 } csbRfBillRealmStatsGroup OBJECT-GROUP OBJECTS { csbRfBillRealmStatsRealmName, csbRfBillRealmStatsTotalStartAcrs, csbRfBillRealmStatsTotalInterimAcrs, csbRfBillRealmStatsTotalStopAcrs, csbRfBillRealmStatsTotalEventAcrs, csbRfBillRealmStatsSuccStartAcrs, csbRfBillRealmStatsSuccInterimAcrs, csbRfBillRealmStatsSuccStopAcrs, csbRfBillRealmStatsSuccEventAcrs, csbRfBillRealmStatsFailStartAcrs, csbRfBillRealmStatsFailInterimAcrs, csbRfBillRealmStatsFailStopAcrs, csbRfBillRealmStatsFailEventAcrs } STATUS current DESCRIPTION "A collection of objects providing Rf billing statistics information on Cisco Session Border Controller (SBC)." ::= { csbStatsMIBGroups 2 } csbSIPMthdCurrentStatsGroup OBJECT-GROUP OBJECTS { csbSIPMthdCurrentStatsAdjName, csbSIPMthdCurrentStatsMethodName, csbSIPMthdCurrentStatsReqIn, csbSIPMthdCurrentStatsReqOut, csbSIPMthdCurrentStatsResp1xxIn, csbSIPMthdCurrentStatsResp1xxOut, csbSIPMthdCurrentStatsResp2xxIn, csbSIPMthdCurrentStatsResp2xxOut, csbSIPMthdCurrentStatsResp3xxIn, csbSIPMthdCurrentStatsResp3xxOut, csbSIPMthdCurrentStatsResp4xxIn, csbSIPMthdCurrentStatsResp4xxOut, csbSIPMthdCurrentStatsResp5xxIn, csbSIPMthdCurrentStatsResp5xxOut, csbSIPMthdCurrentStatsResp6xxIn, csbSIPMthdCurrentStatsResp6xxOut } STATUS current DESCRIPTION "A collection of objects providing statistics for a SIP method and various responses count for this method on a given SIP adjacency and given interval for Cisco Session Border Controller (SBC)." ::= { csbStatsMIBGroups 3 } csbSIPMthdHistoryStatsGroup OBJECT-GROUP OBJECTS { csbSIPMthdHistoryStatsAdjName, csbSIPMthdHistoryStatsMethodName, csbSIPMthdHistoryStatsReqIn, csbSIPMthdHistoryStatsReqOut, csbSIPMthdHistoryStatsResp1xxIn, csbSIPMthdHistoryStatsResp1xxOut, csbSIPMthdHistoryStatsResp2xxIn, csbSIPMthdHistoryStatsResp2xxOut, csbSIPMthdHistoryStatsResp3xxIn, csbSIPMthdHistoryStatsResp3xxOut, csbSIPMthdHistoryStatsResp4xxIn, csbSIPMthdHistoryStatsResp4xxOut, csbSIPMthdHistoryStatsResp5xxIn, csbSIPMthdHistoryStatsResp5xxOut, csbSIPMthdHistoryStatsResp6xxIn, csbSIPMthdHistoryStatsResp6xxOut } STATUS current DESCRIPTION "A collection of objects providing historical statistics for a SIP method and various responses count for this method on a given SIP adjacency and given interval for Cisco Session Border Controller (SBC)." ::= { csbStatsMIBGroups 4 } csbSIPMthdRCCurrentStatsGroup OBJECT-GROUP OBJECTS { csbSIPMthdRCCurrentStatsAdjName, csbSIPMthdRCCurrentStatsMethodName, csbSIPMthdRCCurrentStatsRespIn, csbSIPMthdRCCurrentStatsRespOut } STATUS current DESCRIPTION "A collection of objects providing SIP statistics for a method and response code combination for Cisco Session Border Controller (SBC)." ::= { csbStatsMIBGroups 5 } csbSIPMthdRCHistoryStatsGroup OBJECT-GROUP OBJECTS { csbSIPMthdRCHistoryStatsAdjName, csbSIPMthdRCHistoryStatsMethodName, csbSIPMthdRCHistoryStatsRespIn, csbSIPMthdRCHistoryStatsRespOut } STATUS current DESCRIPTION "A collection of objects providing SIP historical statistics for a method and response code combination for Cisco Session Border Controller (SBC)." ::= { csbStatsMIBGroups 6 } END