-- ********************************************************************* -- CISCO-SCSI-MIB.my: Cisco SCSI Mib -- -- October 2002, H K Vivek -- -- Copyright (c) 2002 by cisco Systems, Inc. -- All rights reserved. -- -- ********************************************************************* CISCO-SCSI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32, Counter64, Gauge32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, TimeStamp, RowStatus, RowPointer, AutonomousType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB ciscoExperiment FROM CISCO-SMI; ciscoScsiMIB MODULE-IDENTITY LAST-UPDATED "200212310000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com" DESCRIPTION "The Cisco version of the SCSI MIB draft draft-ietf-ips-scsi-mib-03.txt from the IETF." REVISION "200212310000Z" DESCRIPTION "Changed the SYNTAX of TruthValue object in the module compliance section so that it compiles with all MIB compilers." REVISION "200211080000Z" DESCRIPTION "Changed the SYNTAX of RowStatus objects in the module compliance section so that it compiles with all MIB compilers." REVISION "200210050000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoExperiment 95 } ciscoScsiObjects OBJECT IDENTIFIER ::= { ciscoScsiMIB 1 } ciscoScsiNotification OBJECT IDENTIFIER ::= { ciscoScsiMIB 2 } ciscoScsiConformance OBJECT IDENTIFIER ::= { ciscoScsiMIB 3 } ciscoScsiTransportTypes OBJECT IDENTIFIER ::= { ciscoScsiObjects 1 } ciscoScsiGeneral OBJECT IDENTIFIER ::= { ciscoScsiObjects 2 } ciscoScsiInitiator OBJECT IDENTIFIER ::= { ciscoScsiObjects 3 } ciscoScsiRemoteTarget OBJECT IDENTIFIER ::= { ciscoScsiInitiator 4 } ciscoScsiTarget OBJECT IDENTIFIER ::= { ciscoScsiObjects 4 } ciscoScsiRemoteInitiators OBJECT IDENTIFIER ::= { ciscoScsiTarget 3 } ciscoScsiLogicalUnit OBJECT IDENTIFIER ::= { ciscoScsiObjects 5 } ciscoScsiTranportOther OBJECT IDENTIFIER ::= { ciscoScsiTransportTypes 1 } ciscoScsiTranportSPI OBJECT IDENTIFIER ::= { ciscoScsiTransportTypes 2 } ciscoScsiTransportFCP OBJECT IDENTIFIER ::= { ciscoScsiTransportTypes 3 } ciscoScsiTransportSRP OBJECT IDENTIFIER ::= { ciscoScsiTransportTypes 4 } ciscoScsiTransportISCSI OBJECT IDENTIFIER ::= { ciscoScsiTransportTypes 5 } ciscoScsiTransportSBP OBJECT IDENTIFIER ::= { ciscoScsiTransportTypes 6 } ciscoScsiNotifications OBJECT IDENTIFIER ::= { ciscoScsiNotification 0 } -- Textual Conventions ScsiLUNOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention represents either a SCSI Logical Unit Number (LUN) or a zero-length string. Objects defined with this syntax must specify the meaning of the zero-length string. The format of a LUN is: - a zero-length octet string or - a string of two octets if the underlying transport protocol is SBP-3 or SPI-4 using data group transfers or - a string of eight octets for all other cases." SYNTAX OCTET STRING (SIZE (0 | 2 | 8)) ScsiIndexValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number greater than zero for administrative indices in a table." SYNTAX Unsigned32 (1..4294967295) ScsiPortIndexValueOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is an extension of the ScsiIndexValue convention. The latter defines a greater than zero value used to identify an index. This extension permits the additional value of zero and is applicable only to indices of SCSI port. The value zero is object-specific and must therefore be defined as part of the description of any object, which uses this syntax. Examples of the usage of zero might include situations where index was unknown, or when none or all indices need to be referenced." SYNTAX Unsigned32(0..4294967295) ScsiIndexValueOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention is an extension of the ScsiIndexValue convention. The latter defines a greater than zero value used to identify an index. This extension permits the additional value of zero. The value zero is object-specific and must therefore be defined as part of the description of any object, which uses this syntax. Examples of the usage of zero might include situations where index was unknown, or when none or all indices need to be referenced." SYNTAX Unsigned32 (0..4294967295) ScsiIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a generic SCSI device or port identifier. The format depends on the transport used: - SPI: only bits:0-3 for a port identifier (LSB is 0 and MSB is 3) - SPI: identifier of a device is a null-length octet string. - FCP: 3 bytes for a port identifier - FCP: identifier of a device is a null-length octet string. - SRP: 16 bytes identifier for a port. - SRP: identifier of a device is a null-length octet string. - iSCSI: 256 bytes for a device identifier. - iSCSI: 258 bytes for a target port. - iSCSI: 262 bytes for an initiator port. - SBP: identifier of a device is a null-length octet string. - SBP: 2 bytes for an initiator port identifier. - SBP: 11 bytes for a target port identifier. " SYNTAX OCTET STRING (SIZE (0 | 1 | 2 | 3| 11 | 16 | 256| 258|262)) ScsiName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a generic SCSI device or port name. The format depends on the transport used: - SPI: name of a device or a port is a null-length octet string. - FCP: 8 bytes for a port name. - FCP: name of a device is a null-length octet string. - SRP: 16 bytes name for a port. - SRP: name of a device is a null-length octet string. - iSCSI: 256 bytes for a device name. - iSCSI: 258 bytes for a target port. - iSCSI: 262 bytes for an initiator port. - SBP: name of a device is a null-length octet string. - SBP: 8 bytes for an initiator port name. - SBP: 11 bytes for a target port name. " SYNTAX OCTET STRING (SIZE (0 | 8 | 11 |16 | 256 | 258| 262)) ScsiNameIdOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention represents either the SCSI name of a logical unit or a zero-length string. Objects defined with this syntax must specify the meaning of the zero-length string. The format of the name of a LU is: - a zero-length octet string or - a string of eight octets." SYNTAX OCTET STRING (SIZE (0 | 8)) ScsiDeviceOrPort ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This type allows to decide if some configuration is applicable to a port or to a device." SYNTAX INTEGER { device(1), port(2), other(3) } ScsiIdCodeSet ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention specifies the code set in use with this identifier. The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 July 2001 Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX Unsigned32 (0..15) ScsiIdAssociation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention specifies what the identifier is associated with (e.g, with the addressed physical/logical device or with a particular port). The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX Unsigned32 (0..3) ScsiIdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention specifies the type of the identifier. The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX Unsigned32 (0..15) ScsiIdValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This Textual Convention represents an identifier. The objects of type ScsiIdCodeSet, ScsIdAssociation, ScsiIdType, define together the format. The format is the same as contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" SYNTAX OCTET STRING (SIZE (0..255)) HrSWInstalledIndexOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The index value for a software module's row in the Host Resources MIB's hrSWInstalledTable. A zero value indicates that no row in the hrSWInstalledTable is applicable." REFERENCE "hrSWInstalledTable is defined in the Host Resources MIB, RFC 2790." SYNTAX Integer32 (0..2147483647) ciscoScsiInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SCSI instances present on the system. The SCSI Instance is the top-level entity, to which everything else belongs. An SNMP agent could represent more than one instance if it represents either a stack of devices, or virtual partitions of a larger device, or a host running multiple SCSI implementations from different vendors." ::= { ciscoScsiGeneral 1 } ciscoScsiInstanceEntry OBJECT-TYPE SYNTAX CiscoScsiInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a particular SCSI instance." INDEX { ciscoScsiInstIndex } ::= { ciscoScsiInstanceTable 1 } CiscoScsiInstanceEntry::= SEQUENCE { ciscoScsiInstIndex ScsiIndexValue, ciscoScsiInstAlias SnmpAdminString, ciscoScsiInstSoftwareIndex HrSWInstalledIndexOrZero, ciscoScsiInstVendorVersion SnmpAdminString, ciscoScsiInstNotifEnable TruthValue } ciscoScsiInstIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular SCSI instance." ::= { ciscoScsiInstanceEntry 1 } ciscoScsiInstAlias OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..79)) MAX-ACCESS read-write STATUS current DESCRIPTION "An administrative string, configured by the administrator to the usage of the administrator. Can be a zero-length string." ::= { ciscoScsiInstanceEntry 2 } ciscoScsiInstSoftwareIndex OBJECT-TYPE SYNTAX HrSWInstalledIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The index in the hrSWInstalledTable of RFC 2790 corresponding to this software entity. It is equal to zero if there is no reference in the hrSWInstalledTable." ::= { ciscoScsiInstanceEntry 3 } ciscoScsiInstVendorVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "A text string set by the manufacturer describing the version of this instance. The format of this string is determined solely by the manufacturer, and is for informational purposes only. It is unrelated to the SCSI specification version numbers." ::= { ciscoScsiInstanceEntry 4 } ciscoScsiInstNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable/disable sending notifications." DEFVAL { true } ::= { ciscoScsiInstanceEntry 5 } -- SCSI Devices ciscoScsiDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SCSI Devices present on the system." ::= { ciscoScsiGeneral 2 } ciscoScsiDeviceEntry OBJECT-TYPE SYNTAX CiscoScsiDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a particular SCSI Device included in this SCSI manageable instance." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex } ::= { ciscoScsiDeviceTable 1 } CiscoScsiDeviceEntry::= SEQUENCE { ciscoScsiDeviceIndex ScsiIndexValue, ciscoScsiDeviceAlias SnmpAdminString, ciscoScsiDeviceRole BITS, ciscoScsiDevicePortNumber Unsigned32, ciscoScsiDeviceResets Counter32 } ciscoScsiDeviceIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular device." ::= { ciscoScsiDeviceEntry 1 } ciscoScsiDeviceAlias OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..79)) MAX-ACCESS read-write STATUS current DESCRIPTION "An admistrative name for this device. May be empty." ::= { ciscoScsiDeviceEntry 2 } ciscoScsiDeviceRole OBJECT-TYPE SYNTAX BITS { target(0), initiator(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Is this device acting as an initiator, or as a target or as both." ::= { ciscoScsiDeviceEntry 3 } ciscoScsiDevicePortNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports contained in this device." ::= { ciscoScsiDeviceEntry 4 } ciscoScsiDeviceResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of times that this device has reset." ::= { ciscoScsiDeviceEntry 5 } -- Ports Table ciscoScsiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of SCSI Ports for each SCSI device in each instance." ::= { ciscoScsiGeneral 3 } ciscoScsiPortEntry OBJECT-TYPE SYNTAX CiscoScsiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing management information applicable to a particular SCSI port of a particular SCSI device in a particular SCSI instance." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiPortIndex } ::= { ciscoScsiPortTable 1 } CiscoScsiPortEntry ::= SEQUENCE { ciscoScsiPortIndex ScsiIndexValue, ciscoScsiPortRole BITS, ciscoScsiPortTrnsptPtr RowPointer, ciscoScsiPortBusyStatuses Counter32 } ciscoScsiPortIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used to uniquely identify a particular port." ::= { ciscoScsiPortEntry 1 } ciscoScsiPortRole OBJECT-TYPE SYNTAX BITS { target(0), initiator(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicated whther this port is acting as an initiator, or as a target or as both." ::= { ciscoScsiPortEntry 2 } ciscoScsiPortTrnsptPtr OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the index of the corresponding transport definition in the ciscoScsiTrnsptTable" ::= { ciscoScsiPortEntry 3 } ciscoScsiPortBusyStatuses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of port busy status sent or received by this port. Note: Initiator ports only receive busy status and target ports only send busy status." ::= { ciscoScsiPortEntry 4 } -- Table of supported transports ciscoScsiTrnsptTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiTrnsptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of transports in use with each SCSI device." ::= { ciscoScsiGeneral 5 } ciscoScsiTrnsptEntry OBJECT-TYPE SYNTAX CiscoScsiTrnsptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing parameters applicable to a transport used by a particular initiator device of a particular SCSI manageable instance." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiTrnsptIndex} ::= { ciscoScsiTrnsptTable 1 } CiscoScsiTrnsptEntry ::= SEQUENCE { ciscoScsiTrnsptIndex ScsiIndexValue, ciscoScsiTrnsptType AutonomousType, ciscoScsiTrnsptPointer RowPointer, ciscoScsiTrnsptDevName ScsiName } ciscoScsiTrnsptIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An administrative integer used to uniquely identify a particular transport." ::= { ciscoScsiTrnsptEntry 1 } ciscoScsiTrnsptType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of transport for this particular transport." ::= { ciscoScsiTrnsptEntry 2 } ciscoScsiTrnsptPointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "A pointer to a conceptual row in a 'transport' MIB allowing a manager to get useful information for the transport described by this entry. For example, if the transport of this device is iSCSI, this object will point to the iSCSI Instance of the iSCSI MIB. If there is no MIB for this transport, this object has the value 0.0." ::= { ciscoScsiTrnsptEntry 3 } ciscoScsiTrnsptDevName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this device in one of the format(s) appropriate for this type of transport." ::= { ciscoScsiTrnsptEntry 4 } -- Management Objects regarding initiators ciscoScsiIntrDevTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiIntrDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information for each local initiator device." ::= { ciscoScsiInitiator 1} ciscoScsiIntrDevEntry OBJECT-TYPE SYNTAX CiscoScsiIntrDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to an initiator device." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex } ::= { ciscoScsiIntrDevTable 1 } CiscoScsiIntrDevEntry ::= SEQUENCE { ciscoScsiIntrDevAccMode INTEGER, ciscoScsiIntrDevOutResets Counter32 -- More statistics to be placed here } ciscoScsiIntrDevAccMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), autoEnable(2), manualEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether a discovered target is immediately authorized or not: - autoEnable(2) means that when an initiator discovers a target, it can use it immediately, - manualEnable(3) means that the initiator must wait for an operator to set ciscoScsiIntrDscTgtDiscovered = true before it is authorized." ::= { ciscoScsiIntrDevEntry 1 } ciscoScsiIntrDevOutResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of resets sent by this initiator device since the local agent's last re-initialization." ::= { ciscoScsiIntrDevEntry 2 } ciscoScsiIntrPrtTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the initiator ports of each SCSI Initiator or Target/Initiator device." ::= { ciscoScsiInitiator 3 } ciscoScsiIntrPrtEntry OBJECT-TYPE SYNTAX CiscoScsiIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to the particular initiator port. " INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiPortIndex } ::= { ciscoScsiIntrPrtTable 1 } CiscoScsiIntrPrtEntry ::= SEQUENCE { ciscoScsiIntrPrtName ScsiName, ciscoScsiIntrPrtIdentifier ScsiIdentifier, ciscoScsiIntrPrtOutCommands Counter32, ciscoScsiIntrPrtWrMegaBytes Counter32, ciscoScsiIntrPrtReadMegaBytes Counter32, ciscoScsiIntrPrtHSOutCommands Counter64 } ciscoScsiIntrPrtName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the port assigned for use by the SCSI protocol. The format will depend of the type of transport this port is using." ::= { ciscoScsiIntrPrtEntry 1 } ciscoScsiIntrPrtIdentifier OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the port in one of the format(s) appropriate for the type of transport in use." ::= { ciscoScsiIntrPrtEntry 2 } ciscoScsiIntrPrtOutCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands sent by this initiator." ::= { ciscoScsiIntrPrtEntry 3 } ciscoScsiIntrPrtWrMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes sent by this initiator." ::= { ciscoScsiIntrPrtEntry 4 } ciscoScsiIntrPrtReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes received by this initiator." ::= { ciscoScsiIntrPrtEntry 5 } ciscoScsiIntrPrtHSOutCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands sent by this initiator device. This object provides support for systems which can quickly generate lots of commands because they run at high speed." ::= { ciscoScsiIntrPrtEntry 6 } ciscoScsiDscTgtTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiDscTgtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote (not in the local system) target ports that are authorized to attach to each local initiator port of this SCSI instance." ::= { ciscoScsiRemoteTarget 1 } ciscoScsiDscTgtEntry OBJECT-TYPE SYNTAX CiscoScsiDscTgtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row)represents a remote target port or device authorized to attach the local initiator device corresponding to the ciscoScsiDeviceIndex or the local initiator port ciscoScsiPortIndexOrZero. " INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiDscTgtIntrPortIndex, ciscoScsiDscTgtIndex } ::= { ciscoScsiDscTgtTable 1 } CiscoScsiDscTgtEntry ::= SEQUENCE { ciscoScsiDscTgtIntrPortIndex ScsiPortIndexValueOrZero, ciscoScsiDscTgtIndex ScsiIndexValue, ciscoScsiDscTgtDevOrPort ScsiDeviceOrPort, ciscoScsiDscTgtName ScsiName, ciscoScsiDscTgtConfigured TruthValue, ciscoScsiDscTgtDiscovered TruthValue, ciscoScsiDscTgtInCommands Counter32, ciscoScsiDscTgtWrMegaBytes Counter32, ciscoScsiDscTgtReadMegaBytes Counter32, ciscoScsiDscTgtHSInCommands Counter64, ciscoScsiDscTgtLastCreation TimeStamp, ciscoScsiDscTgtRowStatus RowStatus } ciscoScsiDscTgtIntrPortIndex OBJECT-TYPE SYNTAX ScsiPortIndexValueOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is: - the index of the local scsi initiator port, - or zero, if this entry refers to the local device and therefore refers to all the local initiator ports." ::= { ciscoScsiDscTgtEntry 1 } ciscoScsiDscTgtIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an administrative integer used to uniquely identify a particular authorized target. (Authorized to attach to this initiator device or port.)" ::= { ciscoScsiDscTgtEntry 2 } ciscoScsiDscTgtDevOrPort OBJECT-TYPE SYNTAX ScsiDeviceOrPort MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this entry refers to a remote target port or remote target device." ::= { ciscoScsiDscTgtEntry 3 } ciscoScsiDscTgtName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of this authorized/discovered target device or port." ::= { ciscoScsiDscTgtEntry 4 } ciscoScsiDscTgtConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object means: true(1): this entry has been configured by an administrator false(2): this entry has been added from other source. An administrator can switch this value from false to true." DEFVAL { true } ::= { ciscoScsiDscTgtEntry 5 } ciscoScsiDscTgtDiscovered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object means: true(1): this entry has been discovered by the SCSI instance. false(2): this entry has been added from other source. This entry is read-only because an administrator cannot change it. Note that it is an implementation issue to decide how long to retain a row with configured=false, as and when the target is no longer visible/accessible to the local initiator." ::= { ciscoScsiDscTgtEntry 6 } ciscoScsiDscTgtInCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands received by this target port or device." ::= { ciscoScsiDscTgtEntry 7 } ciscoScsiDscTgtWrMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes written by this target port or device." ::= { ciscoScsiDscTgtEntry 8 } ciscoScsiDscTgtReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data in Megabytes read by this target port or device." ::= { ciscoScsiDscTgtEntry 9 } ciscoScsiDscTgtHSInCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands received by this target port or device. This object provides support for systems which can quickly generate lots of commands because they run at high speed." ::= { ciscoScsiDscTgtEntry 10 } ciscoScsiDscTgtLastCreation OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the value of sysUpTime when this row was created." ::= { ciscoScsiDscTgtEntry 11 } ciscoScsiDscTgtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows to configure dynamically a new entry in this table via SNMP or eventually delete it. An administrator is not allowed to delete an entry where the object ciscoScsiIntrDscTgtDiscovered is equal to true." ::= { ciscoScsiDscTgtEntry 12 } ciscoScsiDscLunTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiDscLunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote (not in the local system) LUNS discovered via each local initiator port of each SCSI instance." ::= { ciscoScsiRemoteTarget 2 } ciscoScsiDscLunEntry OBJECT-TYPE SYNTAX CiscoScsiDscLunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a LUN discovered by the local initiator device or by the local initiator port." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiDscTgtIntrPortIndex, ciscoScsiDscTgtIndex, ciscoScsiDscLunIndex } ::= { ciscoScsiDscLunTable 1 } CiscoScsiDscLunEntry ::= SEQUENCE { ciscoScsiDscLunIndex ScsiIndexValue, ciscoScsiDscLunLun ScsiLUNOrZero } ciscoScsiDscLunIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an administrative integer used to uniquely identify a particular LUN discovered by a particular scsi initiator port or device. This index will point to an entry for this LUN in the ciscoScsiDscLunIdTable." ::= { ciscoScsiDscLunEntry 1 } ciscoScsiDscLunLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the actual value of the LUN of the discovered logical unit." ::= { ciscoScsiDscLunEntry 2 } ciscoScsiDscLunIdTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiDscLunIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote (not in the local system) LU Identifier discovered via each local initiator port or device of this SCSI instance." ::= { ciscoScsiRemoteTarget 3 } ciscoScsiDscLunIdEntry OBJECT-TYPE SYNTAX CiscoScsiDscLunIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a LU Identifier discovered by each SCSI initiator device or port." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiDscTgtIntrPortIndex, ciscoScsiDscTgtIndex, ciscoScsiDscLunIndex, ciscoScsiDscLunIdIndex } ::= { ciscoScsiDscLunIdTable 1 } CiscoScsiDscLunIdEntry ::= SEQUENCE { ciscoScsiDscLunIdIndex ScsiIndexValue, ciscoScsiDscLunIdCodeSet ScsiIdCodeSet, ciscoScsiDscLunIdAssociation ScsiIdAssociation, ciscoScsiDscLunIdType ScsiIdType, ciscoScsiDscLunIdValue ScsiIdValue } ciscoScsiDscLunIdIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an administrative integer used to uniquely identify a particular LUN Identifier discovered by each scsi initiator device or port." ::= { ciscoScsiDscLunIdEntry 1 } ciscoScsiDscLunIdCodeSet OBJECT-TYPE SYNTAX ScsiIdCodeSet MAX-ACCESS read-only STATUS current DESCRIPTION "This object determines the code set in use for this identifier as specified by the ANSI-SCSI Primary Commands -2 document; the code set can be binary or ascii." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2),Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16] " ::= { ciscoScsiDscLunIdEntry 2 } ciscoScsiDscLunIdAssociation OBJECT-TYPE SYNTAX ScsiIdAssociation MAX-ACCESS read-only STATUS current DESCRIPTION "This value means that the identifier is associated with the addressed physical or logical device or that the identifier is associated with the port that received the request." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { ciscoScsiDscLunIdEntry 3 } ciscoScsiDscLunIdType OBJECT-TYPE SYNTAX ScsiIdType MAX-ACCESS read-only STATUS current DESCRIPTION "This object defines the type of LU Identifier used for this identifier and indicates the format of scsiLUIdValue." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16] " ::= { ciscoScsiDscLunIdEntry 4 } ciscoScsiDscLunIdValue OBJECT-TYPE SYNTAX ScsiIdValue MAX-ACCESS read-only STATUS current DESCRIPTION "The actual value of this identifier. The format is defined by the objects ciscoScsiIntrDscLunIdCodeSet, ciscoScsiIntrDscLunIdAssoc, ciscoScsiIntrDscLunIdType." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { ciscoScsiDscLunIdEntry 5 } ciscoScsiAttTgtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiAttTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote (not in the local system) target ports that are currently attached to each local initiator port of this SCSI instance." ::= { ciscoScsiRemoteTarget 6 } ciscoScsiAttTgtPortEntry OBJECT-TYPE SYNTAX CiscoScsiAttTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a remote target port currently attached to the local initiator port corresponding to the ciscoScsiPortIndex." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiPortIndex, ciscoScsiAttTgtPortIndex } ::= { ciscoScsiAttTgtPortTable 1 } CiscoScsiAttTgtPortEntry ::= SEQUENCE { ciscoScsiAttTgtPortIndex ScsiIndexValue, ciscoScsiAttTgtPortDscTgtIdx ScsiIndexValueOrZero, ciscoScsiAttTgtPortName ScsiName, ciscoScsiAttTgtPortIdentifier ScsiIdentifier } ciscoScsiAttTgtPortIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An administrative integer used to uniquely identify a particular currently attached target." ::= { ciscoScsiAttTgtPortEntry 1 } ciscoScsiAttTgtPortDscTgtIdx OBJECT-TYPE SYNTAX ScsiIndexValueOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The corresponding index in the ciscoScsiIntrDiscTgtTable for this current attached target port or zero if this attached target port is not in the table." ::= { ciscoScsiAttTgtPortEntry 2 } ciscoScsiAttTgtPortName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the remote target port attached to this initiator port." ::= { ciscoScsiAttTgtPortEntry 3 } ciscoScsiAttTgtPortIdentifier OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the remote target port attached to this local initiator port." ::= { ciscoScsiAttTgtPortEntry 4 } ciscoScsiTgtDevTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiTgtDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about each local target device." ::= { ciscoScsiTarget 1 } ciscoScsiTgtDevEntry OBJECT-TYPE SYNTAX CiscoScsiTgtDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to a particular local target device. " INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex } ::= { ciscoScsiTgtDevTable 1 } CiscoScsiTgtDevEntry ::= SEQUENCE { ciscoScsiTgtDevNumberOfLUs Gauge32, ciscoScsiTgtDeviceStatus INTEGER, ciscoScsiTgtDevNonAccLUs Gauge32 } ciscoScsiTgtDevNumberOfLUs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of Logical Units accessible via this local target device." ::= { ciscoScsiTgtDevEntry 1 } ciscoScsiTgtDeviceStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), available(2), broken(3), readying(4), abnormal(5), nonAddrFailure(6), nonAddrFailReadying(7), nonAddrFailAbnormal(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the status of this SCSI device, summarizing the state of both the addressable devices (i.e., the logical units) and the non-addressable devices within this SCSI device: - unknown(1): This value is used when the status cannot be determined - available(2): All addressable and non-addressable devices within the SCSI device are fully operational (i.e., no logical units have an abnormal status). - broken(3): The SCSI device is not operational and cannot be made operational without external intervention. - readying(4): One or more logical units within the SCSI device are being initialized and access to the SCSI device is temporarily limited (i.e., one or more of the logical unit have a readying status). - abnormal(5): One or more addressable devices within the SCSI device are indicating a status other than available; nevertheless, the SCSI device is operational (i.e., one or more of the logical units have an abnormal status). - nonAddrFailure(6): One or more non-addressable devices within the SCSI device have failed; nevertheless, the SCSI device is operational (i.e., no logical units have an abnormal or readying status). - nonAddrFailReadying(7): One or more non-addressable devices within the SCSI device have failed; nevertheless,one or more logical units within the SCSI device are being initialized and access to the SCSI device is temporarily limited. - nonAddrFailAbnormal(8): One or more non-addressable devices within the SCSI device have failed and one or more addressable devices within the SCSI device are indicating a status other than available however the SCSI device is operational." REFERENCE "SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 6.3.1.8 REPORT STATES service action" ::= { ciscoScsiTgtDevEntry 2} ciscoScsiTgtDevNonAccLUs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the number of Logical Units existing but not currently accessible via this local target device." ::= { ciscoScsiTgtDevEntry 3 } -- Target Port Table ciscoScsiTgtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the local target ports of all the local target devices." ::= { ciscoScsiTarget 2 } ciscoScsiTgtPortEntry OBJECT-TYPE SYNTAX CiscoScsiTgtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to a particular local target port of a particular local target device. " INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiPortIndex } ::= { ciscoScsiTgtPortTable 1 } CiscoScsiTgtPortEntry ::= SEQUENCE { ciscoScsiTgtPortName ScsiName, ciscoScsiTgtPortIdentifier ScsiIdentifier, ciscoScsiTgtPortInCommands Counter32, ciscoScsiTgtPortWrMegaBytes Counter32, ciscoScsiTgtPortReadMegaBytes Counter32, ciscoScsiTgtPortHSInCommands Counter64 } ciscoScsiTgtPortName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the port assigned for use in the SCSI protocol." ::= { ciscoScsiTgtPortEntry 1 } ciscoScsiTgtPortIdentifier OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the port in one of the format(s) appropriate for the type of transport." ::= { ciscoScsiTgtPortEntry 2 } ciscoScsiTgtPortInCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands received by this target port." ::= { ciscoScsiTgtPortEntry 3 } ciscoScsiTgtPortWrMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data written in Megabytes by this target port." ::= { ciscoScsiTgtPortEntry 4 } ciscoScsiTgtPortReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the amount of data read in Megabytes by this target port." ::= { ciscoScsiTgtPortEntry 5 } ciscoScsiTgtPortHSInCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands received. This object provides support for systems that can quickly generate lots of commands because they run at high speed." ::= { ciscoScsiTgtPortEntry 6 } ciscoScsiAuthorizedIntrTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiAuthorizedIntrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the authorized initiator devices or ports that may attach a target device or port of the local SCSI entity and that may interest an administrator, like statistics." ::= { ciscoScsiRemoteInitiators 1 } ciscoScsiAuthorizedIntrEntry OBJECT-TYPE SYNTAX CiscoScsiAuthorizedIntrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a remote initiator port that may attach the local target port." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiAuthIntrTgtPortIndex, ciscoScsiAuthIntrIndex } ::= { ciscoScsiAuthorizedIntrTable 1 } CiscoScsiAuthorizedIntrEntry ::= SEQUENCE { ciscoScsiAuthIntrTgtPortIndex ScsiPortIndexValueOrZero, ciscoScsiAuthIntrIndex ScsiIndexValue, ciscoScsiAuthIntrDevOrPort ScsiDeviceOrPort, ciscoScsiAuthIntrName ScsiName, ciscoScsiAuthIntrLunMapIndex ScsiIndexValueOrZero, ciscoScsiAuthIntrAttachedTimes Counter32, ciscoScsiAuthIntrOutCommands Counter32, ciscoScsiAuthIntrReadMegaBytes Counter32, ciscoScsiAuthIntrWrMegaBytes Counter32, ciscoScsiAuthIntrHSOutCommands Counter64, ciscoScsiAuthIntrLastCreation TimeStamp, ciscoScsiAuthIntrRowStatus RowStatus } ciscoScsiAuthIntrTgtPortIndex OBJECT-TYPE SYNTAX ScsiPortIndexValueOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is: - the index of the local scsi target port, - or zero, if this entry refers to a local target device." ::= { ciscoScsiAuthorizedIntrEntry 1 } ciscoScsiAuthIntrIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is an administrative integer used to uniquely identify a particular authorized initiator. (Authorized to attach to this target device or port.)" ::= { ciscoScsiAuthorizedIntrEntry 2 } ciscoScsiAuthIntrDevOrPort OBJECT-TYPE SYNTAX ScsiDeviceOrPort MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this entry refers to a remote initiator port or a device." ::= { ciscoScsiAuthorizedIntrEntry 3 } ciscoScsiAuthIntrName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the remote initiator device or port authorized to attach this local target device or port." ::= { ciscoScsiAuthorizedIntrEntry 4 } ciscoScsiAuthIntrLunMapIndex OBJECT-TYPE SYNTAX ScsiIndexValueOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the set of entries in the ciscoScsiLunMapTable for which ciscoScsiLunMapIndex has the same value as the value of this object. The identified set of entries constitute the LUN map to be used for accessing logical units when the remote initiator corresponding to this entry is attached to any local target corresponding to this entry. Note that this object has a value of zero if this entry should use the default LUN map." ::= { ciscoScsiAuthorizedIntrEntry 5 } ciscoScsiAuthIntrAttachedTimes OBJECT-TYPE SYNTAX Counter32 UNITS "Times" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of times that this remote initiator has transitioned from unattached to attached to this local target device or port." ::= { ciscoScsiAuthorizedIntrEntry 6 } ciscoScsiAuthIntrOutCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of commands that the remote initiator corresponding to this entry has sent to the local target device or port corresponding to this entry." ::= { ciscoScsiAuthorizedIntrEntry 7 } ciscoScsiAuthIntrReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of data in Megabytes that the remote initiator corresponding to this entry has read from the local target device or port corresponding to this entry." ::= { ciscoScsiAuthorizedIntrEntry 8 } ciscoScsiAuthIntrWrMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of data in Megabytes that the remote initiator corresponding to this entry has written from the local target device or port corresponding to this entry." ::= { ciscoScsiAuthorizedIntrEntry 9} ciscoScsiAuthIntrHSOutCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of commands sent by the remote initiator corresponding to this entry to the local target device or port corresponding to this entry. This object provides support for systems which can quickly generate lots of commands because they run at high speed." ::= { ciscoScsiAuthorizedIntrEntry 10 } ciscoScsiAuthIntrLastCreation OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the value of sysUpTime when this row was last created." ::= { ciscoScsiAuthorizedIntrEntry 11 } ciscoScsiAuthIntrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows an administrator to create or delete this entry." ::= { ciscoScsiAuthorizedIntrEntry 12 } ciscoScsiAttIntrPrtTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiAttIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the remote initiator ports that are currently attached to each local target port of this local entity." ::= { ciscoScsiRemoteInitiators 2 } ciscoScsiAttIntrPrtEntry OBJECT-TYPE SYNTAX CiscoScsiAttIntrPrtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) represents a remote initiator currently attached to a particular local target port of a particular target device of a particular SCSI entity." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiPortIndex, ciscoScsiAttIntrPrtIdx } ::= { ciscoScsiAttIntrPrtTable 1 } CiscoScsiAttIntrPrtEntry ::= SEQUENCE { ciscoScsiAttIntrPrtIdx ScsiIndexValue, ciscoScsiAttIntrPrtAuthIntrIdx ScsiIndexValueOrZero, ciscoScsiAttIntrPrtName ScsiName, ciscoScsiAttIntrPrtId ScsiIdentifier } ciscoScsiAttIntrPrtIdx OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An administrative integer used to uniquely identify a particular attached remote initiator port." ::= { ciscoScsiAttIntrPrtEntry 1 } ciscoScsiAttIntrPrtAuthIntrIdx OBJECT-TYPE SYNTAX ScsiIndexValueOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the corresponding index in the ciscoScsiAuthorizedIntrTable for this current attached remote initiator or zero if this remote attached initiator is not configured in that table." ::= { ciscoScsiAttIntrPrtEntry 2 } ciscoScsiAttIntrPrtName OBJECT-TYPE SYNTAX ScsiName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the remote initiator attached to this local target port." ::= { ciscoScsiAttIntrPrtEntry 3 } ciscoScsiAttIntrPrtId OBJECT-TYPE SYNTAX ScsiIdentifier MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the remote initiator attached to this local target port." ::= { ciscoScsiAttIntrPrtEntry 4 } ciscoScsiLuTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiLuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes all the logical units exposed by a local target device." ::= { ciscoScsiLogicalUnit 1 } ciscoScsiLuEntry OBJECT-TYPE SYNTAX CiscoScsiLuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) contains information applicable to a particular logical unit of a particular local target device. " INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiLuIndex } ::= { ciscoScsiLuTable 1 } CiscoScsiLuEntry ::= SEQUENCE { ciscoScsiLuIndex ScsiIndexValue, ciscoScsiLuDefaultLun ScsiLUNOrZero, ciscoScsiLuWwnName ScsiNameIdOrZero, ciscoScsiLuVendorId SnmpAdminString, ciscoScsiLuProductId SnmpAdminString, ciscoScsiLuRevisionId SnmpAdminString, ciscoScsiLuPeripheralType Unsigned32, ciscoScsiLuStatus INTEGER, ciscoScsiLuState BITS, ciscoScsiLuInCommands Counter32, ciscoScsiLuReadMegaBytes Counter32, ciscoScsiLuWrittenMegaBytes Counter32, ciscoScsiLuInResets Counter32, ciscoScsiLuOutQueueFullStatus Counter32, ciscoScsiLuHSInCommands Counter64 } ciscoScsiLuIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An administrative integer used to uniquely identify a particular logical unit." ::= { ciscoScsiLuEntry 1 } ciscoScsiLuDefaultLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The default Logical Unit Number (LUN) for this logical unit; it is the LUN that will appear to an initiator that was not configured to see another LUN. Note that this object will have a zero-length string if this Logical Unit does not have a default LUN." ::= { ciscoScsiLuEntry 2 } ciscoScsiLuWwnName OBJECT-TYPE SYNTAX ScsiNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The World-Wide Name of this LU." ::= { ciscoScsiLuEntry 3 } ciscoScsiLuVendorId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string identifying the vendor of this LU according to the value in SCSI device page." ::= { ciscoScsiLuEntry 4 } ciscoScsiLuProductId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string identifying the product for this LU according to the value in SCSI device page." ::= { ciscoScsiLuEntry 5 } ciscoScsiLuRevisionId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string defining the product revision of this LU according to the value in SCSI device page." ::= { ciscoScsiLuEntry 6 } ciscoScsiLuPeripheralType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the value returned to SCSI query VPD page 83. It can be: direct-access device, sequential-access device, printer, communication device and so on. The values that can be returned here are defined in SCSI Primary Commands -2 ." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), T10 Project 1236- D, Revision 20, 18 July 2001 [16]" ::= { ciscoScsiLuEntry 7 } ciscoScsiLuStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), available(2), notAvailable(3), broken(4), readying(5), abnormal(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this logical unit: - unknown(1): The status of this logical unit cannot be determined. - available(2): The logical unit is fully operational (i.e., accepts media access SCSI commands and has no state information to report). - notAvailable(3): The logical unit is capable of being supported but not available (i.e., no logical unit is currently present or the logical unit is present but not configured for use). - broken(4): The logical unit has failed and cannot respond to SCSI commands. - readying(5): The logical unit is being initialized and access is temporarily limited. - abnormal(6): The logical unit has state information available that indicates it is operating with limits. The ciscoScsiLuState indicates what those limits are." REFERENCE " SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 6.3.1.8 REPORT STATES service action" ::= { ciscoScsiLuEntry 8 } ciscoScsiLuState OBJECT-TYPE SYNTAX BITS { dataLost(0), dynamicReconfigurationInProgress(1), exposed(2), fractionallyExposed(3), partiallyExposed(4), protectedRebuild(5), protectionDisabled(6), rebuild(7), recalculate(8), spareInUse(9), verifyInProgress(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "According the bit position: 0 Data lost: Within the logical unit data has been lost. 1 Dynamic reconfiguration in progress: The logical unit is being reconfigured. In this state all data is still protected. 2 Exposed: Within the logical unit data is not protected. In this state all data is still valid, however, loss of data/data-availability is unavoidable in the event of a failure. 3 Fractionally exposed: Within the logical unit part of the data is not protected. In this state all data is still valid, however, a failure may cause a loss of data or a loss of data availability. 4 Partially exposed: Within the logical unit one or more underlying storage devices have failed. In this state all data is still protected. 5 Protected rebuild: The logical unit is in the process of a rebuild operation. In this state all data is protected. 6 Protection disabled: Within the logical unit the data protection method has been disabled. In this state all data is still valid, however, however, loss of data/data-availability is unavoidable in the event of a failure. 7 Rebuild: The data protection method is in the process of rebuilding data. In this state data is not protected. 8 Recalculate: The logical unit is in the process of a recalculate operation. 9 Spare in use: Within the logical unit a storage device in full or part being used to store data. In this state all data is still protected. 10 Verify in progress: Within the logical unit data is being verified." REFERENCE " SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 6.3.1.8 REPORT STATES service action" ::= { ciscoScsiLuEntry 9 } ciscoScsiLuInCommands OBJECT-TYPE SYNTAX Counter32 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of commands received by this logical unit." ::= { ciscoScsiLuEntry 10 } ciscoScsiLuReadMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the amount of data in Megabytes read from this logical unit." ::= { ciscoScsiLuEntry 11 } ciscoScsiLuWrittenMegaBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Megabytes" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the amount of data in Megabytes written by this logical unit." ::= { ciscoScsiLuEntry 12 } ciscoScsiLuInResets OBJECT-TYPE SYNTAX Counter32 UNITS "resets" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of resets received by this logical unit." ::= { ciscoScsiLuEntry 13 } ciscoScsiLuOutQueueFullStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of queue full statuses received by this logical unit." ::= { ciscoScsiLuEntry 14 } ciscoScsiLuHSInCommands OBJECT-TYPE SYNTAX Counter64 UNITS "commands" MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the number of commands received by this logical unit. This object provides support for systems that can quickly generate lots of commands because they run at high speed." ::= { ciscoScsiLuEntry 15 } ciscoScsiLuIdTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiLuIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of identifiers for all logical units exposed by local targets device." ::= { ciscoScsiLogicalUnit 2 } ciscoScsiLuIdEntry OBJECT-TYPE SYNTAX CiscoScsiLuIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (row) containing information applicable to a particular identifier for a particular logical unit. " INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiLuIndex, ciscoScsiLuIdIndex } ::= { ciscoScsiLuIdTable 1 } CiscoScsiLuIdEntry ::= SEQUENCE { ciscoScsiLuIdIndex ScsiIndexValue, ciscoScsiLuIdCodeSet ScsiIdCodeSet, ciscoScsiLuIdAssociation ScsiIdAssociation, ciscoScsiLuIdType ScsiIdType, ciscoScsiLuIdValue ScsiIdValue } ciscoScsiLuIdIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object represents an arbitrary integer used to uniquely identify a particular LU Identifier within a particular logical unit within a particular SCSI target device within a particular SCSI instance." ::= { ciscoScsiLuIdEntry 1 } ciscoScsiLuIdCodeSet OBJECT-TYPE SYNTAX ScsiIdCodeSet MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the code set in use with this identifier. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 ((SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { ciscoScsiLuIdEntry 2 } ciscoScsiLuIdAssociation OBJECT-TYPE SYNTAX ScsiIdAssociation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies what the identifier is associated with (e.g, with the addressed physical/logical device or with a particular port). The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { ciscoScsiLuIdEntry 3 } ciscoScsiLuIdType OBJECT-TYPE SYNTAX ScsiIdType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of the identifier. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { ciscoScsiLuIdEntry 4 } ciscoScsiLuIdValue OBJECT-TYPE SYNTAX ScsiIdValue MAX-ACCESS read-only STATUS current DESCRIPTION " This object represents the actual value of this identifier. The format is defined by the objects ciscoScsiLuIdCodeSet, ciscoScsiLuIdAssociation, ciscoScsiLuIdType. The value is represented in the same format as is contained in the identifier's Identification Descriptor within the Logical Unit's Device Identification Page." REFERENCE " ANSI - SCSI Primary Commands - 2 (SPC-2), Chapter 8: section 8.4.4, page 210 Vital Product Data Parameters [16]" ::= { ciscoScsiLuIdEntry 5 } -- The LUN Map Table ciscoScsiLunMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoScsiLunMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes LUNs additional to the default one. A logical unit may have a different Logical Unit Number for different initiators. This table provides a mapping between a logical unit and a logical unit number." ::= { ciscoScsiLogicalUnit 3 } ciscoScsiLunMapEntry OBJECT-TYPE SYNTAX CiscoScsiLunMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about the mapping of a particular Logical Unit to a particular LUN. The set of entries which all have the same values of ciscoScsiInstIndex, ciscoScsiDeviceIndex and ciscoScsiLunMapIndex constitute a LUN Map." INDEX { ciscoScsiInstIndex, ciscoScsiDeviceIndex, ciscoScsiLunMapIndex, ciscoScsiLunMapLun } ::= { ciscoScsiLunMapTable 1 } CiscoScsiLunMapEntry ::= SEQUENCE { ciscoScsiLunMapIndex ScsiIndexValue, ciscoScsiLunMapLun ScsiLUNOrZero, ciscoScsiLunMapLuIndex ScsiIndexValue, ciscoScsiLunMapRowStatus RowStatus } ciscoScsiLunMapIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "An administrative integer used to uniquely identify a particular LunMap." ::= { ciscoScsiLunMapEntry 1 } ciscoScsiLunMapLun OBJECT-TYPE SYNTAX ScsiLUNOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Logical Unit Number, to which a logical unit is mapped by this row." ::= { ciscoScsiLunMapEntry 2 } ciscoScsiLunMapLuIndex OBJECT-TYPE SYNTAX ScsiIndexValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the logical unit for which the value of ciscoScsiLuIndex is the same as the value of this object. The identified logical unit is the one mapped to a LUN by this row." ::= { ciscoScsiLunMapEntry 3 } ciscoScsiLunMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows an administrator to create and delete this entry." ::= { ciscoScsiLunMapEntry 4 } -- Notifications ciscoScsiTgtDevStatusChanged NOTIFICATION-TYPE OBJECTS { ciscoScsiTgtDeviceStatus } STATUS current DESCRIPTION " A notification will be generated for each occurrence of the abnormal status (e.g., if the SCSI target device's current status is abnormal) providing that the SCSI instance's value of ciscoScsiInstNotifEnable is enabled. An SNMP agent implementing the SCSI MIB should not send more than three SCSI identical notifications in any 10-second period." ::= { ciscoScsiNotifications 1 } ciscoScsiLuStatusChanged NOTIFICATION-TYPE OBJECTS { ciscoScsiLuStatus } STATUS current DESCRIPTION " A notification will be generated each time that ciscoScsiLuStatus will change providing that the SCSI instance's value of ciscoScsiInstScsiNotificationsEnable is enabled. An SNMP agent implementing the SCSI MIB should not send more than three SCSI identical notifications in any 10-second period." ::= { ciscoScsiNotifications 2 } ciscoScsiCompliances OBJECT IDENTIFIER ::= { ciscoScsiConformance 1 } ciscoScsiGroups OBJECT IDENTIFIER ::= { ciscoScsiConformance 2 } ciscoScsiCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for compliance to this SCSI MIB. If an implementation can be both a target and an initiator, all groups are mandatory." MODULE MANDATORY-GROUPS {ciscoScsiDeviceGroup} OBJECT ciscoScsiInstAlias MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT ciscoScsiInstNotifEnable MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT ciscoScsiDeviceAlias MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." -- Conditionally mandatory groups. GROUP ciscoScsiTargetGroup DESCRIPTION "This group is mandatory for all SCSI implementations that have SCSI target devices." GROUP ciscoScsiLunMapGroup DESCRIPTION "This group is mandatory for system having the capabilities of mapping local targets and logical units according remote initiators." OBJECT ciscoScsiAuthIntrDevOrPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ciscoScsiAuthIntrName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ciscoScsiAuthIntrLunMapIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ciscoScsiAuthIntrRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." GROUP ciscoScsiInitiatorGroup DESCRIPTION "This group is mandatory for all SCSI implementations that have SCSI initiator devices." OBJECT ciscoScsiIntrDevAccMode MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." GROUP ciscoScsiDiscoveryGroup DESCRIPTION "This group is mandatory for system having the capabilities of discovering remote targets via local initiators." OBJECT ciscoScsiLunMapLuIndex MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT ciscoScsiLunMapRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ciscoScsiDscTgtDevOrPort MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT ciscoScsiDscTgtName MIN-ACCESS read-only DESCRIPTION "Write access is not mandatory." OBJECT ciscoScsiDscTgtConfigured SYNTAX INTEGER { false(2) } MIN-ACCESS read-only DESCRIPTION "The value of true(1) is not mandatory neither the write access." OBJECT ciscoScsiDscTgtRowStatus SYNTAX INTEGER { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." GROUP ciscoScsiDeviceStatGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics." GROUP ciscoScsiInitiatorStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI initiator side." GROUP ciscoScsiDiscoveryStatsGroup DESCRIPTION "This group is mandatory for system having the capabilities of gathering statistics regarding remote targets via local initiators." GROUP ciscoScsiTargetStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices." GROUP ciscoScsiLunMapStatsGroup DESCRIPTION "This group is mandatory for SCSI implementations able to map local targets and logical units according remote initiators." GROUP ciscoScsiInitiatorHSStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI initiator side and are running at high speed." GROUP ciscoScsiDiscoveryHSStatsGroup DESCRIPTION "This group is mandatory for system having the capabilities of gathering statistics regarding remote targets via local initiators and are running at high speed." GROUP ciscoScsiTargetHSStatsGroup DESCRIPTION "This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices in high speed system." GROUP ciscoScsiLunMapHSStatsGroup DESCRIPTION "This group is mandatory for SCSI implementations able to map local targets and logical units according remote initiators in high speed system." GROUP ciscoScsiNotifGroup DESCRIPTION "This group is mandatory for SCSI implementations that have local logical units and local targets." ::= { ciscoScsiCompliances 1 } ciscoScsiDeviceGroup OBJECT-GROUP OBJECTS { ciscoScsiInstAlias, ciscoScsiInstSoftwareIndex, ciscoScsiInstVendorVersion, ciscoScsiInstNotifEnable, ciscoScsiDeviceAlias, ciscoScsiDeviceRole, ciscoScsiDevicePortNumber, ciscoScsiPortRole, ciscoScsiPortTrnsptPtr, ciscoScsiTrnsptType, ciscoScsiTrnsptPointer, ciscoScsiTrnsptDevName } STATUS current DESCRIPTION "A collection of objects providing information about SCSI instances, devices and ports." ::= { ciscoScsiGroups 1 } ciscoScsiInitiatorGroup OBJECT-GROUP OBJECTS { ciscoScsiIntrDevAccMode, ciscoScsiIntrPrtName, ciscoScsiIntrPrtIdentifier, ciscoScsiAttTgtPortDscTgtIdx, ciscoScsiAttTgtPortName, ciscoScsiAttTgtPortIdentifier } STATUS current DESCRIPTION "This group is relevant for an initiator device and port." ::= { ciscoScsiGroups 2 } ciscoScsiDiscoveryGroup OBJECT-GROUP OBJECTS { ciscoScsiDscTgtDevOrPort, ciscoScsiDscTgtName, ciscoScsiDscTgtConfigured, ciscoScsiDscTgtDiscovered, ciscoScsiDscTgtRowStatus, ciscoScsiDscTgtLastCreation, ciscoScsiDscLunLun, ciscoScsiDscLunIdCodeSet, ciscoScsiDscLunIdAssociation, ciscoScsiDscLunIdType, ciscoScsiDscLunIdValue } STATUS current DESCRIPTION "This group is relevant for the discovered targets by an initiator port." ::= { ciscoScsiGroups 3 } ciscoScsiTargetGroup OBJECT-GROUP OBJECTS { ciscoScsiTgtDevNumberOfLUs, ciscoScsiTgtDeviceStatus, ciscoScsiTgtDevNonAccLUs, ciscoScsiTgtPortName, ciscoScsiTgtPortIdentifier, ciscoScsiAttIntrPrtAuthIntrIdx, ciscoScsiAttIntrPrtName, ciscoScsiAttIntrPrtId, ciscoScsiLuDefaultLun, ciscoScsiLuWwnName, ciscoScsiLuVendorId, ciscoScsiLuProductId, ciscoScsiLuRevisionId, ciscoScsiLuPeripheralType, ciscoScsiLuStatus, ciscoScsiLuState, ciscoScsiLuIdCodeSet, ciscoScsiLuIdAssociation, ciscoScsiLuIdType, ciscoScsiLuIdValue } STATUS current DESCRIPTION "This group is relevant for a target device and port." ::= { ciscoScsiGroups 4 } ciscoScsiLunMapGroup OBJECT-GROUP OBJECTS { ciscoScsiLunMapLuIndex, ciscoScsiLunMapRowStatus, ciscoScsiAuthIntrDevOrPort, ciscoScsiAuthIntrName, ciscoScsiAuthIntrLunMapIndex, ciscoScsiAuthIntrLastCreation, ciscoScsiAuthIntrRowStatus } STATUS current DESCRIPTION "This group is a collection of attributes regarding the mapping between logical unit number, logical unit and target device." ::= { ciscoScsiGroups 5} ciscoScsiTargetStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiTgtPortInCommands, ciscoScsiTgtPortWrMegaBytes, ciscoScsiTgtPortReadMegaBytes, ciscoScsiLuInCommands, ciscoScsiLuReadMegaBytes, ciscoScsiLuWrittenMegaBytes, ciscoScsiLuInResets, ciscoScsiLuOutQueueFullStatus } STATUS current DESCRIPTION "This group is a collection of statistics for all implementations of the SCSI MIB that contain targets." ::= { ciscoScsiGroups 6} ciscoScsiTargetHSStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiTgtPortHSInCommands, ciscoScsiLuHSInCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics for all implementations of the SCSI MIB that contain targets." ::= { ciscoScsiGroups 7} ciscoScsiLunMapStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiAuthIntrAttachedTimes, ciscoScsiAuthIntrOutCommands, ciscoScsiAuthIntrReadMegaBytes, ciscoScsiAuthIntrWrMegaBytes } STATUS current DESCRIPTION "This group is a collection of statistics regarding initiators authorized to attach local logical unit and target device." ::= { ciscoScsiGroups 8} ciscoScsiLunMapHSStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiAuthIntrHSOutCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics regarding initiators authorized to attach local logical unit and target device." ::= { ciscoScsiGroups 9} ciscoScsiInitiatorStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiIntrDevOutResets, ciscoScsiIntrPrtOutCommands, ciscoScsiIntrPrtWrMegaBytes, ciscoScsiIntrPrtReadMegaBytes } STATUS current DESCRIPTION "This group is a collection of statistics for all implementations of the SCSI MIB that contain initiators." ::= { ciscoScsiGroups 10} ciscoScsiInitiatorHSStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiIntrPrtHSOutCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics for all implementations of the SCSI MIB that contain initiators." ::= { ciscoScsiGroups 11} ciscoScsiDiscoveryStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiDscTgtInCommands, ciscoScsiDscTgtReadMegaBytes, ciscoScsiDscTgtWrMegaBytes } STATUS current DESCRIPTION "This group is a collection of statistics for all implementations of the SCSI MIB that contain discovered initiators." ::= { ciscoScsiGroups 12} ciscoScsiDiscoveryHSStatsGroup OBJECT-GROUP OBJECTS { ciscoScsiDscTgtHSInCommands } STATUS current DESCRIPTION "This group is a collection of high speed statistics for all implementations of the SCSI MIB that contain discovered initiators." ::= { ciscoScsiGroups 13} ciscoScsiDeviceStatGroup OBJECT-GROUP OBJECTS { ciscoScsiDeviceResets, ciscoScsiPortBusyStatuses } STATUS current DESCRIPTION "A collection of statistics regarding about SCSI devices and ports." ::= { ciscoScsiGroups 14 } ciscoScsiNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoScsiTgtDevStatusChanged, ciscoScsiLuStatusChanged } STATUS current DESCRIPTION "This group is a collection of notifications." ::= { ciscoScsiGroups 15 } END