-- ***************************************************************** -- The interim Chassis MIB for Rhino ATM switch -- -- Nov 1995, Yunsen Wang -- -- Copyright (c) 1996-1997, 1998, 1999, 2000 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-RHINO-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TimeStamp, DisplayString, TruthValue FROM SNMPv2-TC InterfaceIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex FROM RFC1213-MIB workgroup FROM CISCO-SMI Unsigned32 FROM CISCO-TC; ciscoLS1010ChassisMIB MODULE-IDENTITY LAST-UPDATED "200103290000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-atm@cisco.com" DESCRIPTION "-Added enum sixPortDS3 for ciscoLS1010SubModuleType. -Added enum nodeSwitchProcessor2ndGeneration for ciscoLS1010ModuleType. -Added enum ac175W for psType. -Added Group object for Notification objects." REVISION "200103290000Z" DESCRIPTION "-Added enum ACL Daughter card SubModuleType for Cat8540. -Added enum for TS Carrier Module. -Added enum for medium SingleModeLRFiber for OC3 and OC12 ATM pams." REVISION "200102150000Z" DESCRIPTION "-Added object for module hardware minor version. -Added objects for module and submodule serial number in string format. -Deprecated integer serial number objects for module and submodule. -Added enumeration to submodule type for NRP2 for 6400. -Reduce to single Module Compliance for clarity." REVISION "200007200000Z" DESCRIPTION "Added enums XPIF GE, ATM, and POS SubModuleTypes for Cat8540c. Added enums cmpmCarrier ModuleType for Cat8540c." REVISION "200004110000Z" DESCRIPTION "Added enums in ChassisSysType & ChassisBkplType for Cat4908g" REVISION "200002070000Z" DESCRIPTION "Added enums for OC48c LR, and Dual Slot modules." REVISION "9911300000Z" DESCRIPTION "Added enums for OC48c and ARM modules." REVISION "9910040000Z" DESCRIPTION "Added enums in ChassisSysType & ChassisBkplType for C2948." REVISION "9906290000Z" DESCRIPTION "Added enums in subModuleType for the IMA & ATM25M4P PAMs." REVISION "9906170000Z" DESCRIPTION "Added enumerations for Cat6k" REVISION "9903120000Z" DESCRIPTION "Added enumerations for TGX8750." REVISION "9812020000Z" DESCRIPTION "Consolidate changes from C6400, C8500, FR-PAM, new modules." REVISION "9810260000Z" DESCRIPTION "Added new enum c8510. Also new tables for enet ports and LEDs." REVISION "9807130000Z" DESCRIPTION "Rhino ATM Switch Chassis MIB" REVISION "9711200000Z" DESCRIPTION "Added ciscoAtmInterceptEndToEndOamFlow. Editorial changes." REVISION "9707220000Z" DESCRIPTION "Added clocking objects " REVISION "9702040000Z" DESCRIPTION "Added object ciscoLS1010SubModuleHwVersionMinor." REVISION "9610020000Z" DESCRIPTION "Added a new PsType for -48 VDC." REVISION "9510020000Z" DESCRIPTION "Initial version of this MIB module." ::= { workgroup 11 } ciscoLS1010ChassisMIBObjects OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIB 1 } ciscoLS1010ChassisGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 1 } ciscoLS1010ModuleGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 2 } ciscoLS1010SubModuleGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 3 } ciscoLS1010PortGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 4 } ciscoLS1010CpuSwitchGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 5 } clsEnetPortGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 6 } clsPortLedGroup OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBObjects 7 } PsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Power Supply type" SYNTAX INTEGER { powerone(0), -- vendor astec(1), minus48VDC(2), empty(3), -- not present ac1100W(4), -- C5500 ac1200W(5), -- C5500 dc1200W(6), -- C5500 pem(7), -- C6400, DC Power entry module ac1360W(8), dc1360W(9), ac2000W(10), dc2000W(11), acpem(12), --C6400,AC Power entry module ac175W(13) -- Domino } OperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational status of a chassis component. fanAlarm(4) is only applicable to the C5500 power supply. A fault(3) supercedes a fanAlarm(4). partialFault(5) & empty(6) are used by the Cisco6400 for the fan status to indicate partial fans failure & fan not present. A fault(3) value indicates total fans failure in the C6400." SYNTAX INTEGER { unknown(1), -- none of the following ok(2), -- status ok fault(3), -- major problem fanAlarm(4), -- for C5500 power supply partialFault(5), -- partial failure empty(6) -- not present } AdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Admin status of a chassis component." SYNTAX INTEGER { enable(1), disable(2), reset(3) } Led ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "LED status" SYNTAX INTEGER { off(1), green(2), red(3), yellow(4), blinkgreen(5), blinkyellow(6), blinkred(7), unknown(8) } PcmciaType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "PCMCIA card type" SYNTAX INTEGER { unknown(1), -- vendor empty(2), -- not present flash(3), disk(4) } -- the chassis group ciscoLS1010ChassisSysType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ls1010(2), c8510(3), cisco6400(4), c8540(5), tgx8750(6), wsx6302(7), -- C6K Multilayer Switch c2948g(8), c4908g(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis system type." ::= { ciscoLS1010ChassisGroup 1 } ciscoLS1010ChassisBkplType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following atm(2), -- LS1010 chassis c5500(3), -- Catalyst5500 chassis cisco6400(4), c8510(5), c8540(6), tgx8750(7), cat6000(8), -- C6K Multilayer Switch c2948g(9), c4908g(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis backplane type." ::= { ciscoLS1010ChassisGroup 2 } ciscoLS1010ChassisPs0Type OBJECT-TYPE SYNTAX PsType MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power supply number 1." ::= { ciscoLS1010ChassisGroup 3 } ciscoLS1010ChassisPs0AdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable power supply 1." ::= { ciscoLS1010ChassisGroup 4 } ciscoLS1010ChassisPs0Status OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of power supply number 1." ::= { ciscoLS1010ChassisGroup 5 } ciscoLS1010ChassisPs0Led OBJECT-TYPE SYNTAX Led MAX-ACCESS read-only STATUS current DESCRIPTION "LED Status of power supply number 1." ::= { ciscoLS1010ChassisGroup 6 } ciscoLS1010ChassisPs1Type OBJECT-TYPE SYNTAX PsType MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power supply number 2." ::= { ciscoLS1010ChassisGroup 7 } ciscoLS1010ChassisPs1AdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable power supply 2." ::= { ciscoLS1010ChassisGroup 8 } ciscoLS1010ChassisPs1Status OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of power supply number 2." ::= { ciscoLS1010ChassisGroup 9 } ciscoLS1010ChassisPs1Led OBJECT-TYPE SYNTAX Led MAX-ACCESS read-only STATUS current DESCRIPTION "LED Status of power supply number 2." ::= { ciscoLS1010ChassisGroup 10 } ciscoLS1010ChassisFanStatus OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the chassis fan." ::= { ciscoLS1010ChassisGroup 11 } ciscoLS1010ChassisFanLed OBJECT-TYPE SYNTAX Led MAX-ACCESS read-only STATUS current DESCRIPTION "LED Status of fan." ::= { ciscoLS1010ChassisGroup 12 } ciscoLS1010ChassisCardStatusLed OBJECT-TYPE SYNTAX Led MAX-ACCESS read-only STATUS current DESCRIPTION "LED Status of CPU card." ::= { ciscoLS1010ChassisGroup 13 } ciscoLS1010ChassisEnetLinkLed OBJECT-TYPE SYNTAX Led MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link status LED of CPU card." ::= { ciscoLS1010ChassisGroup 14 } ciscoLS1010Chassis12VoltStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), outOfTolerance(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis 12V status." ::= { ciscoLS1010ChassisGroup 15 } ciscoLS1010ChassisTempStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), overTemperature(2), minorWarning(3), -- Used by C6400 majorWarning(4), -- Used by C6400 criticalWarning(5)-- Used by C6400 } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis temperature status. The values of minorWarning(3), majorWarning(4) and criticalWarning(5) will be primarily used by C6400 to indicate the core temperature. C6400 will never report overTemperature(2) status. In C6400 there are two temperature sensors: core and inlet. C6400 use this object to represent the core temperature and the other object ciscoLS1010ChassisInletTempStatus to represent the inlet temperature." ::= { ciscoLS1010ChassisGroup 16 } ciscoLS1010ChassisPcmciaSlot0Type OBJECT-TYPE SYNTAX PcmciaType MAX-ACCESS read-only STATUS current DESCRIPTION "Type of PCMCIA slot 0 type." ::= { ciscoLS1010ChassisGroup 17 } ciscoLS1010ChassisPcmciaSlot1Type OBJECT-TYPE SYNTAX PcmciaType MAX-ACCESS read-only STATUS current DESCRIPTION "Type of PCMCIA slot 1 type." ::= { ciscoLS1010ChassisGroup 18 } ciscoLS1010ChassisNumSlots OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of slots in the chassis for plug-in modules." ::= { ciscoLS1010ChassisGroup 19 } ciscoLS1010ChassisLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The last time chassis physical content get changed." ::= { ciscoLS1010ChassisGroup 20 } ciscoLS1010ChassisFailureAction OBJECT-TYPE SYNTAX INTEGER { nothing(1), sendTrap(2), shutdown(3), sendTrapAndShutdown(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to take when there is any chassis failure, which includes either power supply, voltage, temperature and fan failure." DEFVAL { sendTrapAndShutdown } ::= { ciscoLS1010ChassisGroup 21 } ciscoLS1010ChassisChangeAction OBJECT-TYPE SYNTAX INTEGER { nothing(1), sendTrap(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The action to take when there is any chassis change, which includes either power supply, fan and boards." DEFVAL { sendTrap } ::= { ciscoLS1010ChassisGroup 22 } ciscoLS1010ChassisClockingMode OBJECT-TYPE SYNTAX INTEGER { revertive(1), nonRevertive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The clocking mode of the ls1010 system. By default, the mode is non-revertive, which means that the clock will stick to the current priority, even though higher priority clock is available." ::= { ciscoLS1010ChassisGroup 23 } ciscols1010SystemClockSourceStatus OBJECT-TYPE SYNTAX INTEGER { notSelected(1), selected(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The network clock source status of 'system' source: 'notSelected' indicates 'system' not selected as the network clock source. 'selected' indicates ASP freerunning(system) is selected as network clock source. " ::= { ciscoLS1010ChassisGroup 24 } ciscols1010SystemClockSourcePriority OBJECT-TYPE SYNTAX INTEGER { priority1(1), priority2(2), priority3(3), priority4(4), priority5(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The highest priority at which 'system' is configured as a network clock source. " ::= { ciscoLS1010ChassisGroup 25 } ciscoLS1010ChassisInletTempStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), overTemperature(2), minorWarning(3), majorWarning(4), criticalWarning(5), unknown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "C6400 has two temperature sensors: core and inlet. C6400 use this object to represent the inlet temperature and use the object ciscoLS1010ChassisTempStatus to represent the core temperature." ::= { ciscoLS1010ChassisGroup 26 } -- the module group ciscoLS1010ModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoLS1010ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of module entries. The number of entries is given by the value of ciscoLS1010ChassisNumSlots." ::= { ciscoLS1010ModuleGroup 1 } ciscoLS1010ModuleEntry OBJECT-TYPE SYNTAX CiscoLS1010ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about one module in a slot of the chassis." INDEX { ciscoLS1010ModuleIndex } ::= { ciscoLS1010ModuleTable 1 } CiscoLS1010ModuleEntry ::= SEQUENCE { ciscoLS1010ModuleIndex INTEGER, ciscoLS1010ModuleType INTEGER, ciscoLS1010ModuleSerialNumber Integer32, ciscoLS1010ModuleHwVersion Integer32, ciscoLS1010ModuleSwVersion Integer32, ciscoLS1010ModuleDescr DisplayString, ciscoLS1010ModuleNumSubModules INTEGER, ciscoLS1010ModuleAdminStatus AdminStatus, ciscoLS1010ModuleOperStatus OperStatus, ciscoLS1010ModuleHwVersionMinor Unsigned32, ciscoLS1010ModuleSerialNumberString DisplayString } ciscoLS1010ModuleIndex OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value for each module." ::= { ciscoLS1010ModuleEntry 1 } ciscoLS1010ModuleType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following carrier(2), cpuSwitchAndFeature(3), -- FC1 cpuSwitchAndFeaturePFQ(4), -- FC-PFQ superCarrier(5), cpuRoute(6), -- routing processor switch10GAndFC(7), -- 10 gigabit switch fabric -- with feature card option switch10GNoFC(8), -- 10 gigabit switch fabric -- w/o feature card option atmFabricIntegration(9), -- on C5500 dualSlot(10), -- Dual slot module for OC48c cmpmCarrier(11), -- CMPM module in 8540c tsCarrier(12), -- TS Carrier Module nodeSwitchProcessor2ndGeneration(13) --NSP2 } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of module." ::= { ciscoLS1010ModuleEntry 2 } ciscoLS1010ModuleSerialNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The serial number of the module. Deprecated in favor of object ciscoLS1010ModuleSerialNumberString. This object returns 0 for modules using an alphanumeric numbering scheme." ::= { ciscoLS1010ModuleEntry 3 } ciscoLS1010ModuleHwVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware version of the module." ::= { ciscoLS1010ModuleEntry 4 } ciscoLS1010ModuleSwVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The software version number." ::= { ciscoLS1010ModuleEntry 5 } ciscoLS1010ModuleDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptive string used by the agent to describe the module." ::= { ciscoLS1010ModuleEntry 6 } ciscoLS1010ModuleNumSubModules OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The max number of sub-modules supported by this module." ::= { ciscoLS1010ModuleEntry 7 } ciscoLS1010ModuleAdminStatus OBJECT-TYPE SYNTAX AdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when read, always returns a value of ok(1). Setting this object to one of the acceptable values gives the following results: reset: reset the module's control logic enable: enable the module disable: disable the module Setting this object to any other values results in an error." ::= { ciscoLS1010ModuleEntry 8 } ciscoLS1010ModuleOperStatus OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the module." ::= { ciscoLS1010ModuleEntry 9 } ciscoLS1010ModuleHwVersionMinor OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minor hardware version of the module." ::= { ciscoLS1010ModuleEntry 10 } ciscoLS1010ModuleSerialNumberString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the module." ::= { ciscoLS1010ModuleEntry 11 } -- the sub-module group ciscoLS1010SubModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoLS1010SubModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of sub-module entries. The number of entries is given by the value of ciscoLS1010SlotNumSubModules." ::= { ciscoLS1010SubModuleGroup 1 } ciscoLS1010SubModuleEntry OBJECT-TYPE SYNTAX CiscoLS1010SubModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about one sub-module in a sub-slot of the module." INDEX { ciscoLS1010ModuleIndex, ciscoLS1010SubModuleIndex } ::= { ciscoLS1010SubModuleTable 1 } CiscoLS1010SubModuleEntry ::= SEQUENCE { ciscoLS1010SubModuleIndex INTEGER, ciscoLS1010SubModuleType INTEGER, ciscoLS1010SubModuleSerialNumber Integer32, ciscoLS1010SubModuleHwVersion Integer32, ciscoLS1010SubModuleSwVersion Integer32, ciscoLS1010SubModuleDescr DisplayString, ciscoLS1010SubModuleNumPorts INTEGER, ciscoLS1010SubModuleAdminStatus INTEGER, ciscoLS1010SubModuleHwVersionMinor Integer32, ciscoLS1010SubModuleOperStatus OperStatus, ciscoLS1010SubModuleSerialNumberString DisplayString } ciscoLS1010SubModuleIndex OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value for each sub-module within the module. This value is determined by sub-slot number where the sub-module is inserted." ::= { ciscoLS1010SubModuleEntry 1 } ciscoLS1010SubModuleType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following oc3Utp5(2), oc3SingleModeFiber(3), oc3MultiModeFiber(4), oc12SingleModeFiber(5), oc12MultiModeFiber(6), ds3(7), e3(8), cpuSwitch(9), featureFpga(10), featureAsic(11), t1(12), e1(13), e1bnc(14), oc3Mixed(15), cbrt1(16), cbr120e1(17), cbr75e1(18), quadDs3(19), quadE3(20), dualDs3(21), dualE3(22), oc12Mixed(23), atm25(24), featurePVC(25), routerProcessorAlpha(26), -- Cisco6400 NRP card dualOC3SingleModeIRFiber(27), -- Cisco 6400 -- Line card dualOC3MultiModeIRFiber(28), routerProcessorBeta(29), -- Cisco6400 -- NRP2 card -- FR/FUNI Frame Port Adapters fratm1CT3(30), fratm4CE1(31), -- more ATM port adapters oc3SingleModeLRFiber(35), oc12SingleModeLRFiber(36), sixPortDS3(37), feUTP8p16k(40), -- 8 port fast ethernet UTP feUTP8p64k(41), feMMF8p16k(42), -- 8 port fast ethernet fiber feMMF8p64k(43), feUTP16p16k(44), -- 16 port fast ethernet UTP feUTP16p64k(45), feMMF16p16k(46), -- 16 port fast ethernet fiber feMMF16p64k(47), geF1p16k(48), -- 1 port gigabit ethernet fiber geF1p64k(49), geF2p16k(50), -- 2 port gigabit ethernet fiber geF2p64k(51), feBridge4p(52), -- fast ethernet bridge card feUTP8p16kFullDup(53), -- 8 port UTP full duplex feUTP8p64kFullDup(54), routeProc(55), -- routing processor switch10GProc(56), -- 10G switching processor featureNetClock(57), -- network clock FC featureABR(58), -- ABR relative rate FC geF8p64k(59), -- 8 port gig-ether fiber -- cat8540 featureLite(60), -- c8540MSR Port Adapters s16pOC3MM(61), s16pOC3SM(62), s4pOC12MM(63), s4pOC12SM(64), atmIma8pT1(65), atmIma8pE1(66), atm25m4p(67), s1pOC48cSM(68), s1pOC48cSMLR(69), -- cat5500 Bridge card atmFIMBridge(70), atmFIMoc12MM(71), -- ATM Router Module card arm1p64k(80), arm2p64k(81), -- 8540c XPIF Giga Ethernet Module (Barracuda) xpif1pGE16k(82), xpif1pGE64k(83), xpif1pGE256k(84), -- 8540c XPIF ATM OC12/3 Module card (Garfield) xpifAtm1pOC12SMIR64k(85), xpifAtm1pOC12SMIR256k(86), xpifAtm1pOC12MM64k(87), xpifAtm1pOC12MM256k(88), xpifAtm1pOC3SMIR64k(89), xpifAtm1pOC3SMIR256k(90), xpifAtm1pOC3MM64k(91), xpifAtm1pOC3MM256k(92), -- 8540c XPIF POS OC12 Module card (POS) xpifPos1pOC12SMIR64k(93), xpifPos1pOC12SMIR256k(94), xpifPos1pOC12SMLR64k(95), xpifPos1pOC12SMLR256k(96), -- ATM Router Module (XPIF) card xpifArm2p256k(97), -- ACL Daughter card for EPIF and GPIF aclDaughter(98) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of sub-module." ::= { ciscoLS1010SubModuleEntry 2 } ciscoLS1010SubModuleSerialNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The serial number of the sub-module. Deprecated in favor of object ciscoLS1010SubModuleSerialNumberString. This object returns 0 for submodules using an alphanumeric numbering scheme." ::= { ciscoLS1010SubModuleEntry 3 } ciscoLS1010SubModuleHwVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The major hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersionMinor, this completely specifies the hardware version of the sub-module." ::= { ciscoLS1010SubModuleEntry 4 } ciscoLS1010SubModuleSwVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The software version number." ::= { ciscoLS1010SubModuleEntry 5 } ciscoLS1010SubModuleDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptive string used by the agent to describe the module." ::= { ciscoLS1010SubModuleEntry 6 } ciscoLS1010SubModuleNumPorts OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of ports supported by this sub-module." ::= { ciscoLS1010SubModuleEntry 7 } ciscoLS1010SubModuleAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be read/written as reset or ok." ::= { ciscoLS1010SubModuleEntry 8 } ciscoLS1010SubModuleHwVersionMinor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minor hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersion, this completely specifies the hardware version of the sub-module." ::= { ciscoLS1010SubModuleEntry 9 } ciscoLS1010SubModuleOperStatus OBJECT-TYPE SYNTAX OperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the submodule." ::= { ciscoLS1010SubModuleEntry 10 } ciscoLS1010SubModuleSerialNumberString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the sub-module." ::= { ciscoLS1010SubModuleEntry 11 } -- the port group ciscoLS1010PortTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoLS1010PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port entries. The number of entries is determined by the number of modules in the chassis, the number of sub-module in the module and the number of ports on each sub-module." ::= { ciscoLS1010PortGroup 1 } ciscoLS1010PortEntry OBJECT-TYPE SYNTAX CiscoLS1010PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information for a particular port on a sub-module." INDEX { ciscoLS1010ModuleIndex, ciscoLS1010SubModuleIndex, ciscoLS1010PortIndex } ::= { ciscoLS1010PortTable 1 } CiscoLS1010PortEntry ::= SEQUENCE { ciscoLS1010PortIndex INTEGER, ciscoLS1010PortIfIndex InterfaceIndex } ciscoLS1010PortIndex OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies this port within a sub-module. The value is determined by the location of the port on the sub-module. Valid entries are 1 to the value of subModuleNumPorts for this sub-module." ::= { ciscoLS1010PortEntry 1 } ciscoLS1010PortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value assigned to this port." ::= { ciscoLS1010PortEntry 2 } -- the ethernet port group clsEnetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ClsEnetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ethernet port entries. This table is mainly to support ethernet port only." ::= { clsEnetPortGroup 1 } clsEnetPortEntry OBJECT-TYPE SYNTAX ClsEnetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains information of a particular ethernet port." INDEX { ifIndex } ::= { clsEnetPortTable 1 } ClsEnetPortEntry ::= SEQUENCE { clsEnetPortDuplex INTEGER, clsEnetPortAdminSpeed INTEGER, clsEnetPortType INTEGER, clsEnetPortLinkStatus INTEGER } clsEnetPortDuplex OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- not applicable or other auto(2), -- auto negotiation half(3), -- half duplex full(4) -- full duplex } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is operating in half-duplex, full-duplex, or auto mode. If the port could not agree with the far end on port duplex, the port will be in auto(2) mode. Unknown(1) indicates either the port does not support duplex mode, or the duplex mode is none of the defined." ::= { clsEnetPortEntry 1 } clsEnetPortAdminSpeed OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- not applicable or other auto(2), -- auto negotiation e10Mbps(3), -- 10 Mbps e100Mbps(4), -- 100 Mbps e1000Mbps(5) -- 1000 Mbps } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the desired speed of the port in bits per second. The current operational speed of the port is determined by ifSpeed. If the port could not agree with the far end on port speed, the port will be in auto(2) mode, which will force the port to transmit in speed whichever is lower. Unknown(1) indicates either the port does not support admin speed, or the admin speed is none of the defined." ::= { clsEnetPortEntry 2 } clsEnetPortType OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- empty or other e100BaseTX(2), -- UTP fast Ethernet e100BaseFX(3), -- Fiber fast Ethernet e1000BaseLX(4), -- Long Wave SMF Giga Ethernet e1000BaseSX(5), -- Short Wave MMF Giga Ethernet empty(6) -- port not present } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of physical layer medium-dependent interface on the port. unknown(1) indicates that the port type is none of those defined. empty(6) indicates that the port is not present." ::= { clsEnetPortEntry 3 } clsEnetPortLinkStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- not applicable or other autoNegotiate(2), forceUp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates how the link status of the port came up. autoNegotiate(2) -- the port will try to negotiate the link with the partner port. If successful, the link will come up, otherwise the link will remain down. forceUp(3) -- the port will force the link up irrespective of its partner port. This will bring up the link in full duplex only. Default is autoNegotiate(2)." ::= { clsEnetPortEntry 4 } -- the port LED group clsPortLedTable OBJECT-TYPE SYNTAX SEQUENCE OF ClsPortLedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of LED entries associated with a port." ::= { clsPortLedGroup 1 } clsPortLedEntry OBJECT-TYPE SYNTAX ClsPortLedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry contains information of a particular LED associated with a particular port which is identified by ifIndex." INDEX { ifIndex, clsPortLedIndex } ::= { clsPortLedTable 1 } ClsPortLedEntry ::= SEQUENCE { clsPortLedIndex INTEGER, clsPortLedType INTEGER, clsPortLedStatus INTEGER } clsPortLedIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies this LED among all the LEDs associated with the port identified by ifIndex. This value is related to the physical location of the LED, and is in ascending order from top to bottom, left to right." ::= { clsPortLedEntry 1 } clsPortLedType OBJECT-TYPE SYNTAX INTEGER { ledTx(1), -- transmit ledRx(2), -- receive ledLink(3), -- link status led100Mbps(4), -- port speed ledRxLoss(5), -- Rx cell loss ledRxFullOut(6), -- Rx cell full out ledRxSync(7), -- Rx sync ledFullDuplex(8), -- full duplex ledOptDetect(9) -- optical detect } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type or label of the LED." ::= { clsPortLedEntry 2 } clsPortLedStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- not supported or other on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the status of the LED. Unknown(1) indicates either the LED status is not supported or the status is none of the defined." ::= { clsPortLedEntry 3 } -- the CPU/switch fabric group ciscoAtmCpuAdminStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset will reload the CPU board." ::= { ciscoLS1010CpuSwitchGroup 1 } ciscoAtmSwitchTotalBuffer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total cell buffer count in switch's shared memory." ::= { ciscoLS1010CpuSwitchGroup 2 } ciscoAtmSwitchFreeBuffer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The free cell buffer count in switch's shared memory." ::= { ciscoLS1010CpuSwitchGroup 3 } ciscoAtmSwitchDiscardCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total discarded cells of the switch." ::= { ciscoLS1010CpuSwitchGroup 4 } ciscoAtmSwitchInvalidCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total invalid cells of the switch." ::= { ciscoLS1010CpuSwitchGroup 5 } ciscoAtmSwitchInvalidCellHeaderTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoAtmSwitchInvalidCellHeaderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of invalid cell header entries." ::= { ciscoLS1010CpuSwitchGroup 6 } ciscoAtmSwitchInvalidCellHeaderEntry OBJECT-TYPE SYNTAX CiscoAtmSwitchInvalidCellHeaderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a entry of invalid cell header." INDEX { ciscoAtmSwitchInvalidCellHeaderIndex } ::= { ciscoAtmSwitchInvalidCellHeaderTable 1 } CiscoAtmSwitchInvalidCellHeaderEntry ::= SEQUENCE { ciscoAtmSwitchInvalidCellHeaderIndex INTEGER, ciscoAtmSwitchInvalidCellHeader OCTET STRING } ciscoAtmSwitchInvalidCellHeaderIndex OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A sequence number that identifies a invalid cell header entry in the table." ::= { ciscoAtmSwitchInvalidCellHeaderEntry 1 } ciscoAtmSwitchInvalidCellHeader OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5)) MAX-ACCESS read-only STATUS current DESCRIPTION "The most recently received invalid cells header. octet 0 is port number (0-32), octet 1 bit 7-5 is PTI, octet 1 bit 4 is CLP, octet 1 bit 3-0 is GFC, octet 2 is VPI, octet 3 is high byte of VCI octet 4 is low byte of VCI." ::= { ciscoAtmSwitchInvalidCellHeaderEntry 2 } ciscoAtmCpuTerminateOamFlow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete -- superseded by ciscoAtmCpuTerminateVpOamFlow DESCRIPTION "Terminate all the incoming OAM cells to the CPU port." DEFVAL { false } -- no oam flow termination, by default ::= { ciscoLS1010CpuSwitchGroup 7 } ciscoAtmInterceptEndToEndOamFlow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether incoming end-to-end OAM flow cells are sent to the switch CPU. If the value is 'true', all incoming end-to-end OAM flow cells, including those on transit connections, are sent to the switch CPU. This value may be modified at any time. The modified value will apply to all existing connections. Note that if the value is 'false', the switch can not use the ATM PING application for end-to-end loopback on transit connections, since the end-to-end OAM cells on such connections will not be seen by the switch CPU." DEFVAL { true } ::= { ciscoLS1010CpuSwitchGroup 8 } -- the following two OBJECT IDENTIFIERS are used to define SNMPv2 Notifications -- that are backward compatible with SNMPv1 Traps. ciscoLS1010ChassisMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIB 2 } ciscoLS1010ChassisMIBNotifications OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBNotificationPrefix 0 } ciscoLS1010ChassisFailureNotification NOTIFICATION-TYPE OBJECTS { ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisFanStatus, ciscoLS1010Chassis12VoltStatus, ciscoLS1010ChassisTempStatus } STATUS current DESCRIPTION "Agent detects a change in the status of ps0, ps1, fan, 12V line, and/or chassis temperature. This notification will be generated when the status changes from no-fault to fault, and also when the status changes from fault to no-fault." ::= { ciscoLS1010ChassisMIBNotifications 1 } ciscoLS1010ChassisChangeNotification NOTIFICATION-TYPE -- no OBJECTS STATUS current DESCRIPTION "Agent detects any hot-swap component change or changes in the chassis." ::= { ciscoLS1010ChassisMIBNotifications 2 } -- conformance information ciscoLS1010ChassisMIBConformance OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIB 3 } ciscoLS1010ChassisMIBCompliances OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBConformance 1 } ciscoLS1010ChassisMIBGroups OBJECT IDENTIFIER ::= { ciscoLS1010ChassisMIBConformance 2 } -- compliance statements ciscoLS1010ChassisMIBCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev1." MODULE -- this module MANDATORY-GROUPS { ciscoLS1010ChassisMIBGroup } ::= { ciscoLS1010ChassisMIBCompliances 1 } ciscoLS1010ChassisMIBComplianceRev1 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev2." MODULE -- this module MANDATORY-GROUPS { ciscoLS1010ChassisMIBGroup, ciscoLS1010ChassisMIBRev1Group } ::= { ciscoLS1010ChassisMIBCompliances 2 } ciscoLS1010ChassisMIBComplianceRev2 MODULE-COMPLIANCE STATUS obsolete -- superseded by ciscoLS1010ChassisMIBComplianceRev3 DESCRIPTION "The compliance statement for entities which implement the Cisco LS1010 Chassis MIB" MODULE -- this module MANDATORY-GROUPS { ciscoLS1010ChassisMIBGroup, ciscoLS1010ChassisMIBRev1Group, ciscoLS1010ChassisMIBClockingGroup } ::= { ciscoLS1010ChassisMIBCompliances 3 } -- ciscoLS1010ChassisMIBComplianceRev3 is superceded by -- ciscoLS1010ChassisMIBComplianceRev4 ciscoLS1010ChassisMIBComplianceRev3 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Cisco LS1010 Chassis MIB." MODULE -- this module MANDATORY-GROUPS { ciscoLS1010ChassisMIBGroup1, ciscoLS1010ChassisMIBClockingGroup } ::= { ciscoLS1010ChassisMIBCompliances 4 } ciscoLS1010ChassisMIBComplianceRev4 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for entities which implement the Cisco LS1010 Chassis MIB." MODULE -- this module MANDATORY-GROUPS { ciscoLS1010ChassisMIBGroup1, ciscoLS1010ChassisMIBClockingGroup, clsEnetPortGroup1, clsPortLedGroup1 } ::= { ciscoLS1010ChassisMIBCompliances 5 } ciscoLS1010ChassisMIBComplianceRev5 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for the Cisco 6400 product." MODULE -- this module MANDATORY-GROUPS { ciscoLS1010ChassisMIBGroup1, ciscoLS1010ChassisMIBClockingGroup, clsOperStatusGroup, clsInletTempGroup } ::= { ciscoLS1010ChassisMIBCompliances 6 } ciscoLS1010ChassisMIBComplianceRev6 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for this MIB." MODULE -- this module MANDATORY-GROUPS { ciscoLS1010ChassisMIBGroup2, ciscoLS1010ChassisMIBClockingGroup } OBJECT ciscoLS1010ModuleSerialNumberString SYNTAX DisplayString (SIZE (1..32)) DESCRIPTION "Support for serial numbers longer than 32 characters is not required." OBJECT ciscoLS1010SubModuleSerialNumberString SYNTAX DisplayString (SIZE (1..32)) DESCRIPTION "Support for serial numbers longer than 32 characters is not required." ::= { ciscoLS1010ChassisMIBCompliances 7 } -- units of conformance ciscoLS1010ChassisMIBGroup OBJECT-GROUP OBJECTS { ciscoLS1010ChassisSysType, ciscoLS1010ChassisBkplType, ciscoLS1010ChassisPs0Type, ciscoLS1010ChassisPs0AdminStatus, ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs0Led, ciscoLS1010ChassisPs1Type, ciscoLS1010ChassisPs1AdminStatus, ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisPs1Led, ciscoLS1010ChassisFanStatus, ciscoLS1010ChassisFanLed, ciscoLS1010ChassisCardStatusLed, ciscoLS1010ChassisEnetLinkLed, ciscoLS1010Chassis12VoltStatus, ciscoLS1010ChassisTempStatus, ciscoLS1010ChassisPcmciaSlot0Type, ciscoLS1010ChassisPcmciaSlot1Type, ciscoLS1010ChassisNumSlots, ciscoLS1010ChassisLastChange, ciscoLS1010ChassisFailureAction, ciscoLS1010ChassisChangeAction, ciscoLS1010ChassisInletTempStatus, ciscoLS1010ModuleType, ciscoLS1010ModuleSerialNumber, ciscoLS1010ModuleHwVersion, ciscoLS1010ModuleSwVersion, ciscoLS1010ModuleDescr, ciscoLS1010ModuleNumSubModules, ciscoLS1010ModuleAdminStatus, ciscoLS1010ModuleOperStatus, ciscoLS1010SubModuleType, ciscoLS1010SubModuleSerialNumber, ciscoLS1010SubModuleHwVersion, ciscoLS1010SubModuleSwVersion, ciscoLS1010SubModuleDescr, ciscoLS1010SubModuleNumPorts, ciscoLS1010SubModuleAdminStatus, ciscoLS1010PortIfIndex, ciscoAtmCpuAdminStatus, ciscoAtmSwitchTotalBuffer, ciscoAtmSwitchFreeBuffer, ciscoAtmSwitchDiscardCells, ciscoAtmSwitchInvalidCells, ciscoAtmSwitchInvalidCellHeader } STATUS obsolete DESCRIPTION "A collection of objects providing rhino chassis information" ::= { ciscoLS1010ChassisMIBGroups 1 } ciscoLS1010ChassisMIBObsoleteGroup OBJECT-GROUP OBJECTS { ciscoAtmCpuTerminateOamFlow } STATUS obsolete DESCRIPTION "A collection of objects providing rhino chassis information which are obsolete." ::= { ciscoLS1010ChassisMIBGroups 2 } ciscoLS1010ChassisMIBRev1Group OBJECT-GROUP OBJECTS { ciscoLS1010SubModuleHwVersionMinor } STATUS current DESCRIPTION "A collection of objects useful for reporting the hardware version of sub-modules in the chassis." ::= { ciscoLS1010ChassisMIBGroups 3 } ciscoLS1010ChassisMIBClockingGroup OBJECT-GROUP OBJECTS { ciscoLS1010ChassisClockingMode, ciscols1010SystemClockSourceStatus, ciscols1010SystemClockSourcePriority } STATUS current DESCRIPTION "A collection of objects useful for managing clocking." ::= { ciscoLS1010ChassisMIBGroups 4 } ciscoLS1010ChassisMIBGroup1 OBJECT-GROUP OBJECTS { ciscoLS1010ChassisSysType, ciscoLS1010ChassisBkplType, ciscoLS1010ChassisPs0Type, ciscoLS1010ChassisPs0AdminStatus, ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs0Led, ciscoLS1010ChassisPs1Type, ciscoLS1010ChassisPs1AdminStatus, ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisPs1Led, ciscoLS1010ChassisFanStatus, ciscoLS1010ChassisFanLed, ciscoLS1010ChassisCardStatusLed, ciscoLS1010ChassisEnetLinkLed, ciscoLS1010Chassis12VoltStatus, ciscoLS1010ChassisTempStatus, ciscoLS1010ChassisPcmciaSlot0Type, ciscoLS1010ChassisPcmciaSlot1Type, ciscoLS1010ChassisNumSlots, ciscoLS1010ChassisLastChange, ciscoLS1010ChassisFailureAction, ciscoLS1010ChassisChangeAction, ciscoLS1010ModuleType, ciscoLS1010ModuleSerialNumber, ciscoLS1010ModuleHwVersion, ciscoLS1010ModuleSwVersion, ciscoLS1010ModuleDescr, ciscoLS1010ModuleNumSubModules, ciscoLS1010ModuleAdminStatus, ciscoLS1010SubModuleType, ciscoLS1010SubModuleSerialNumber, ciscoLS1010SubModuleHwVersion, ciscoLS1010SubModuleSwVersion, ciscoLS1010SubModuleDescr, ciscoLS1010SubModuleNumPorts, ciscoLS1010SubModuleAdminStatus, ciscoLS1010SubModuleOperStatus, ciscoLS1010SubModuleHwVersionMinor, ciscoLS1010PortIfIndex, ciscoAtmCpuAdminStatus, ciscoAtmSwitchTotalBuffer, ciscoAtmSwitchFreeBuffer, ciscoAtmSwitchDiscardCells, ciscoAtmSwitchInvalidCells, ciscoAtmSwitchInvalidCellHeader, ciscoAtmInterceptEndToEndOamFlow } STATUS obsolete DESCRIPTION "A collection of objects for managing the LS1010 chassis." ::= { ciscoLS1010ChassisMIBGroups 5 } clsEnetPortGroup1 OBJECT-GROUP OBJECTS { clsEnetPortDuplex, clsEnetPortAdminSpeed, clsEnetPortType, clsEnetPortLinkStatus } STATUS current DESCRIPTION "A collection of objects for managing ethernet ports." ::= { ciscoLS1010ChassisMIBGroups 6 } clsPortLedGroup1 OBJECT-GROUP OBJECTS { clsPortLedType, clsPortLedStatus } STATUS current DESCRIPTION "A collection of objects for showing port LEDs." ::= { ciscoLS1010ChassisMIBGroups 7 } clsOperStatusGroup OBJECT-GROUP OBJECTS { ciscoLS1010ModuleOperStatus, ciscoLS1010SubModuleOperStatus } STATUS current DESCRIPTION "A collection of objects for displaying operational status of modules and sub-modules in the chassis." ::= { ciscoLS1010ChassisMIBGroups 8 } clsInletTempGroup OBJECT-GROUP OBJECTS { ciscoLS1010ChassisInletTempStatus } STATUS current DESCRIPTION "A collection of objects for reporting inlet temperature." ::= { ciscoLS1010ChassisMIBGroups 9 } ciscoLS1010ChassisMIBGroup2 OBJECT-GROUP OBJECTS { ciscoLS1010ChassisSysType, ciscoLS1010ChassisBkplType, ciscoLS1010ChassisPs0Type, ciscoLS1010ChassisPs0AdminStatus, ciscoLS1010ChassisPs0Status, ciscoLS1010ChassisPs0Led, ciscoLS1010ChassisPs1Type, ciscoLS1010ChassisPs1AdminStatus, ciscoLS1010ChassisPs1Status, ciscoLS1010ChassisPs1Led, ciscoLS1010ChassisFanStatus, ciscoLS1010ChassisFanLed, ciscoLS1010ChassisCardStatusLed, ciscoLS1010ChassisEnetLinkLed, ciscoLS1010Chassis12VoltStatus, ciscoLS1010ChassisTempStatus, ciscoLS1010ChassisPcmciaSlot0Type, ciscoLS1010ChassisPcmciaSlot1Type, ciscoLS1010ChassisNumSlots, ciscoLS1010ChassisLastChange, ciscoLS1010ChassisFailureAction, ciscoLS1010ChassisChangeAction, ciscoLS1010ModuleType, ciscoLS1010ModuleHwVersion, ciscoLS1010ModuleSwVersion, ciscoLS1010ModuleDescr, ciscoLS1010ModuleNumSubModules, ciscoLS1010ModuleAdminStatus, ciscoLS1010SubModuleType, ciscoLS1010SubModuleHwVersion, ciscoLS1010SubModuleSwVersion, ciscoLS1010SubModuleDescr, ciscoLS1010SubModuleNumPorts, ciscoLS1010SubModuleAdminStatus, ciscoLS1010SubModuleOperStatus, ciscoLS1010SubModuleHwVersionMinor, ciscoLS1010PortIfIndex, ciscoAtmCpuAdminStatus, ciscoAtmSwitchTotalBuffer, ciscoAtmSwitchFreeBuffer, ciscoAtmSwitchDiscardCells, ciscoAtmSwitchInvalidCells, ciscoAtmSwitchInvalidCellHeader, ciscoAtmInterceptEndToEndOamFlow, ciscoLS1010ModuleHwVersionMinor, ciscoLS1010ModuleSerialNumberString, ciscoLS1010SubModuleSerialNumberString } STATUS current DESCRIPTION "A collection of objects for managing the LS1010 chassis." ::= { ciscoLS1010ChassisMIBGroups 10 } ciscoLS1010ChassisMIBDeprecatedGroup OBJECT-GROUP OBJECTS { ciscoLS1010ModuleSerialNumber, ciscoLS1010SubModuleSerialNumber } STATUS deprecated DESCRIPTION "A collection of objects providing rhino chassis information which are obsolete." ::= { ciscoLS1010ChassisMIBGroups 11 } ciscoLS1010ChassisMIBNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoLS1010ChassisFailureNotification, ciscoLS1010ChassisChangeNotification } STATUS current DESCRIPTION "A collection of notifications supported by LS1010 chassis." ::= { ciscoLS1010ChassisMIBGroups 12 } END