-- ***************************************************************** -- CISCO-PROCESS-MIB.my: MIB for CPU and process statistics -- -- August 1998, Ramanathan R. Kavasseri -- -- Copyright (c) 1998, 2001, 2003, 2006-2010 by cisco Systems Inc. -- All rights reserved. -- ***************************************************************** -- -- This mib was extracted from RFC xxx CISCO-PROCESS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Unsigned32, NOTIFICATION-TYPE, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeStamp, DisplayString, RowStatus, TruthValue, RowPointer, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB CounterBasedGauge64 FROM HCNUM-TC EntPhysicalIndexOrZero, Unsigned64 FROM CISCO-TC ciscoMgmt FROM CISCO-SMI; ciscoProcessMIB MODULE-IDENTITY LAST-UPDATED "201005060000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "The MIB module to describe active system processes. Virtual Machine refers to those OS which can run the code or process of a different executional model OS. Virtual Process assume the executional model of a OS which is different from Native OS. Virtual Processes are also referred as Tasks. Thread is a sequence of instructions to be executed within a program. Thread which adhere to POSIX standard is referred as a POSIX thread." REVISION "201005060000Z" DESCRIPTION "Added the following new objects to the cpmCPUTotalTable. cpmCPUMemoryCommitted, cpmCPUMemoryCommittedOvrFlow and cpmCPUMemoryHCCommitted. Added new compliance group cpmCPUTotalMemoryCommitGroup which includes Committed memory objects. Added new compliance cProcessMIBComplianceRev5 which deprecates cProcessMIBComplianceRev4." REVISION "200910120000Z" DESCRIPTION "Added TEXTUAL-CONVENTION called CPULoadAverage. Added the following new objects to cpmCPUTotalTable. cpmCPULoadAvg1min, cpmCPULoadAvg5min, cpmCPULoadAvg15min. Added new compliance group cpmCPULoadAvgGroup which includes load average objects. Added new compliance cProcessMIBComplianceRev4 which deprecates cProcessMIBComplianceRev3." REVISION "200901230000Z" DESCRIPTION "Added the following new objects to cpmCPUTotalTable. cpmCPUMemoryUsedOvrflw, cpmCPUMemoryHCUsed, cpmCPUMemoryFreeOvrflw, cpmCPUMemoryHCFree, cpmCPUMemoryKernelReservedOvrflw, cpmCPUMemoryHCKernelReserved, cpmCPUMemoryLowestOvrflw, cpmCPUMemoryHCLowest Added the following new objects to cpmProcessExtRevTable. cpmProcExtMemAllocatedRevOvrflw, cpmProcExtHCMemAllocatedRev, cpmProcExtMemFreedRevOvrflw, cpmProcExtHCMemFreedRev, cpmProcessTextSegmentSizeOvrflw, cpmProcessHCTextSegmentSize, cpmProcessDataSegmentSizeOvrflw, cpmProcessHCDataSegmentSize, cpmProcessStackSizeOvrflw, cpmProcessHCStackSize, cpmProcessDynamicMemorySizeOvrflw, cpmProcessHCDynamicMemorySize Added the following new objects to cpmThreadTable. cpmThreadStackSizeOvrflw, cpmThreadHCStackSize Added the following new objects to cpmVirtualProcessTable. cpmVirtualProcessMemAllocatedOvrflw, cpmVirtualProcessHCMemAllocated, cpmVirtualProcessMemFreedOvrflw, cpmVirtualProcessHCMemFreed Added following new compliance groups. cpmCPUTotalOverflowGroup, cpmCPUTotalOverflowGroup, cpmProcessExtRevOverflowGroup, cpmProcessExtRevHCGroup, cpmThreadOverflowGroup, cpmThreadHCGroup, cpmVirtualProcessOverflowGroup, cpmVirtualProcessHCGroup Added new compliance cProcessMIBComplianceRev3 which deprecates cProcessMIBComplianceRev2." REVISION "200703230000Z" DESCRIPTION "Added new objects to support POSIX compliant OS. Added cpmThread, cpmThreadTable, cpmVirtualProcess, cpmVirtualProcessTable and updated cpmCPUTotalTable, cpmProcessExtRevTable. Added cProcessMIBComplianceRev2 by deprecating cProcessMIBComplianceRev1. Added cpmCPUPosixMemoryGroup, cpmPosixProcessGroup, cpmThreadGroup, cpmVirtualProcessGroup." REVISION "200301220000Z" DESCRIPTION "cpmCPUThresholdTable, cpmCPUHistoryTable, cpmCPUProcessHistoryTable are added for CPU thresholding feature." REVISION "200105180000Z" DESCRIPTION "The objects cpmProcExtUtil5Sec, cpmProcExtUtil1Min, cpmProcExtUtil5Min,cpmCPUTotal5sec, cpmCPUTotal1min and cpmCPUTotal5min are deprecated to increase the value range as 0..100. The table cpmProcessExtTable is deprecated. The new objects added are cpmProcessExtRevTable, cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev, cpmProcExtInvokedRev, cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev, cpmCPUTotal5MinRev, cpmCPUTotal5secRev, cpmCPUTotal1minRev and cpmCPUTotal5minRev." REVISION "9804150000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 109 } CPULoadAverage ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The average number of processes in the queue waiting for CPU time over the last N minutes, where the N is defined by the object using this TC. This is similar to UNIX/Linux system load average. The calculation may vary by different OS kernels, so refer to the specific system document of your interest. The object value, which uses this TC, reflects the average number of runnable processes with units of hundredths of processes, i.e. a value of 183 indicates the average number of runnable processes over the N minutes is 1.83." SYNTAX Unsigned32 -- This MIB displays memory and CPU utilization on cisco devices. CPU -- utilization will give a general idea of how busy the processor is. -- The numbers are a ratio of the current idle time over the longest -- idle time. Please note that this information should be used as an -- estimate only. ciscoProcessMIBObjects OBJECT IDENTIFIER ::= { ciscoProcessMIB 1 } cpmCPU OBJECT IDENTIFIER ::= { ciscoProcessMIBObjects 1 } cpmProcess OBJECT IDENTIFIER ::= { ciscoProcessMIBObjects 2 } cpmThread OBJECT IDENTIFIER ::= { ciscoProcessMIBObjects 3 } cpmVirtualProcess OBJECT IDENTIFIER ::= { ciscoProcessMIBObjects 4 } cpmCPUHistory OBJECT IDENTIFIER ::= { cpmProcess 5 } -- Cisco CPU Total Table cpmCPUTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of overall CPU statistics." ::= { cpmCPU 1 } cpmCPUTotalEntry OBJECT-TYPE SYNTAX CpmCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Overall information about the CPU load. Entries in this table come and go as CPUs are added and removed from the system." INDEX { cpmCPUTotalIndex } ::= { cpmCPUTotalTable 1 } CpmCPUTotalEntry ::= SEQUENCE { cpmCPUTotalIndex Unsigned32, cpmCPUTotalPhysicalIndex EntPhysicalIndexOrZero, cpmCPUTotal5sec Gauge32, cpmCPUTotal1min Gauge32, cpmCPUTotal5min Gauge32, cpmCPUTotal5secRev Gauge32, cpmCPUTotal1minRev Gauge32, cpmCPUTotal5minRev Gauge32, cpmCPUMonInterval Unsigned32, cpmCPUTotalMonIntervalValue Gauge32, cpmCPUInterruptMonIntervalValue Gauge32, cpmCPUMemoryUsed Gauge32, cpmCPUMemoryFree Gauge32, cpmCPUMemoryKernelReserved Gauge32, cpmCPUMemoryLowest Gauge32, cpmCPUMemoryUsedOvrflw Gauge32, cpmCPUMemoryHCUsed CounterBasedGauge64, cpmCPUMemoryFreeOvrflw Gauge32, cpmCPUMemoryHCFree Counter64, cpmCPUMemoryKernelReservedOvrflw Gauge32, cpmCPUMemoryHCKernelReserved CounterBasedGauge64, cpmCPUMemoryLowestOvrflw Gauge32, cpmCPUMemoryHCLowest CounterBasedGauge64, cpmCPULoadAvg1min CPULoadAverage, cpmCPULoadAvg5min CPULoadAverage, cpmCPULoadAvg15min CPULoadAverage, cpmCPUMemoryCommitted Gauge32, cpmCPUMemoryCommittedOvrflw Gauge32, cpmCPUMemoryHCCommitted CounterBasedGauge64 } cpmCPUTotalIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely represents a CPU (or group of CPUs) whose CPU load information is reported by a row in this table. This index is assigned arbitrarily by the engine and is not saved over reboots." ::= { cpmCPUTotalEntry 1 } cpmCPUTotalPhysicalIndex OBJECT-TYPE SYNTAX EntPhysicalIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The entPhysicalIndex of the physical entity for which the CPU statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero." ::= { cpmCPUTotalEntry 2 } cpmCPUTotal5sec OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 5 second period. This object obsoletes the busyPer object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal5secRev which has the changed range of value (0..100)." ::= { cpmCPUTotalEntry 3 } cpmCPUTotal1min OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 1 minute period. This object obsoletes the avgBusy1 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal1minRev which has the changed range of value (0..100)." ::= { cpmCPUTotalEntry 4 } cpmCPUTotal5min OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 5 minute period. This object deprecates the avgBusy5 object from the OLD-CISCO-SYSTEM-MIB. This object is deprecated by cpmCPUTotal5minRev which has the changed range of value (0..100)." ::= { cpmCPUTotalEntry 5 } cpmCPUTotal5secRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The overall CPU busy percentage in the last 5 second period. This object deprecates the object cpmCPUTotal5sec and increases the value range to (0..100). This object is deprecated by cpmCPUTotalMonIntervalValue" ::= { cpmCPUTotalEntry 6 } cpmCPUTotal1minRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last 1 minute period. This object deprecates the object cpmCPUTotal1min and increases the value range to (0..100)." ::= { cpmCPUTotalEntry 7 } cpmCPUTotal5minRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last 5 minute period. This object deprecates the object cpmCPUTotal5min and increases the value range to (0..100)." ::= { cpmCPUTotalEntry 8 } cpmCPUMonInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "CPU usage monitoring interval. The value of this object in seconds indicates the how often the CPU utilization is calculated and monitored." ::= { cpmCPUTotalEntry 9 } cpmCPUTotalMonIntervalValue OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the last cpmCPUMonInterval period. This object deprecates the object cpmCPUTotal5secRev." ::= { cpmCPUTotalEntry 10 } cpmCPUInterruptMonIntervalValue OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU busy percentage in the interrupt context in the last cpmCPUMonInterval period." ::= { cpmCPUTotalEntry 11 } cpmCPUMemoryUsed OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is currently under use." ::= { cpmCPUTotalEntry 12 } cpmCPUMemoryFree OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is currently free." ::= { cpmCPUTotalEntry 13 } cpmCPUMemoryKernelReserved OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is reserved for kernel usage." ::= { cpmCPUTotalEntry 14 } cpmCPUMemoryLowest OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest free memory that has been recorded since device has booted." ::= { cpmCPUTotalEntry 15 } cpmCPUMemoryUsedOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmCPUMemoryUsed. This object needs to be supported only when the value of cpmCPUMemoryUsed exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmCPUTotalEntry 16 } cpmCPUMemoryHCUsed OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is currently under use. This object is a 64-bit version of cpmCPUMemoryUsed." ::= { cpmCPUTotalEntry 17 } cpmCPUMemoryFreeOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmCPUMemoryFree. This object needs to be supported only when the value of cpmCPUMemoryFree exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmCPUTotalEntry 18 } cpmCPUMemoryHCFree OBJECT-TYPE SYNTAX Counter64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is currently free. This object is a 64-bit version of cpmCPUMemoryFree." ::= { cpmCPUTotalEntry 19 } cpmCPUMemoryKernelReservedOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmCPUMemoryKernelReserved. This object needs to be supported only when the value of cpmCPUMemoryKernelReserved exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmCPUTotalEntry 20 } cpmCPUMemoryHCKernelReserved OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is reserved for kernel usage. This object is a 64-bit version of cpmCPUMemoryKernelReserved." ::= { cpmCPUTotalEntry 21 } cpmCPUMemoryLowestOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmCPUMemoryLowest. This object needs to be supported only when the value of cpmCPUMemoryLowest exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmCPUTotalEntry 22 } cpmCPUMemoryHCLowest OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest free memory that has been recorded since device has booted. This object is a 64-bit version of cpmCPUMemoryLowest." ::= { cpmCPUTotalEntry 23 } cpmCPULoadAvg1min OBJECT-TYPE SYNTAX CPULoadAverage UNITS "hundredths of processes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU load Average in the last 1 minute period" ::= { cpmCPUTotalEntry 24 } cpmCPULoadAvg5min OBJECT-TYPE SYNTAX CPULoadAverage UNITS "hundredths of processes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU load Average in the last 5 minutes period" ::= { cpmCPUTotalEntry 25 } cpmCPULoadAvg15min OBJECT-TYPE SYNTAX CPULoadAverage UNITS "hundredths of processes" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU load Average in the last 15 minutes period" ::= { cpmCPUTotalEntry 26 } cpmCPUMemoryCommitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is currently Committed." ::= { cpmCPUTotalEntry 27 } cpmCPUMemoryCommittedOvrflw OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmCPUMemoryCommitted. This object needs to be supported only when the value of cpmCPUMemoryCommitted exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmCPUTotalEntry 28 } cpmCPUMemoryHCCommitted OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU wide system memory which is currently committed. This object is a 64-bit version of cpmCPUMemoryCommitted" ::= { cpmCPUTotalEntry 29 } -- Cisco Processes Common Table cpmProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of generic information on all active processes on this device." ::= { cpmProcess 1 } cpmProcessEntry OBJECT-TYPE SYNTAX CpmProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Generic information about an active process on this device. Entries in this table come and go as processes are created and destroyed by the device." INDEX { cpmCPUTotalIndex, cpmProcessPID } ::= { cpmProcessTable 1 } CpmProcessEntry ::= SEQUENCE { cpmProcessPID Unsigned32, cpmProcessName DisplayString, cpmProcessuSecs Unsigned32, cpmProcessTimeCreated TimeStamp, cpmProcessAverageUSecs Unsigned32 } cpmProcessPID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the process ID. cpmTimeCreated should be checked against the last time it was polled, and if it has changed the PID has been reused and the entire entry should be polled again." ::= { cpmProcessEntry 1 } cpmProcessName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name associated with this process. If the name is longer than 32 characters, it will be truncated to the first 31 characters, and a `*' will be appended as the last character to imply this is a truncated process name." ::= { cpmProcessEntry 2 } cpmProcessuSecs OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Average elapsed CPU time in microseconds when the process was active. This object is deprecated by cpmProcessAverageUSecs." ::= { cpmProcessEntry 4 } cpmProcessTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the process was created. The process ID and the time when the process was created, uniquely identifies a process." ::= { cpmProcessEntry 5 } cpmProcessAverageUSecs OBJECT-TYPE SYNTAX Unsigned32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Average elapsed CPU time in microseconds when the process was active. This object deprecates the object cpmProcessuSecs." ::= { cpmProcessEntry 6 } -- Cisco processes detail Table. This table is mandatory on systems -- that have the internal capability to keep the information. cpmProcessExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmProcessExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table contains information that may or may not be available on all cisco devices. It contains additional objects for the more general cpmProcessTable. This object is deprecated by cpmProcessExtRevTable." ::= { cpmProcess 2 } cpmProcessExtEntry OBJECT-TYPE SYNTAX CpmProcessExtEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry containing additional information for a particular process. This object is deprecated by cpmProcessExtRevEntry." AUGMENTS { cpmProcessEntry } ::= { cpmProcessExtTable 1 } CpmProcessExtEntry ::= SEQUENCE { cpmProcExtMemAllocated Gauge32, cpmProcExtMemFreed Gauge32, cpmProcExtInvoked Counter32, cpmProcExtRuntime Counter32, cpmProcExtUtil5Sec Gauge32, cpmProcExtUtil1Min Gauge32, cpmProcExtUtil5Min Gauge32, cpmProcExtPriority INTEGER } cpmProcExtMemAllocated OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. The sum of freed memory is provided by cpmProcExtMemFreed. This object is deprecated by cpmProcExtMemAllocatedRev." ::= { cpmProcessExtEntry 1 } cpmProcExtMemFreed OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The sum of all memory that this process has returned to the system. This object is deprecated by cpmProcExtMemFreedRev." ::= { cpmProcessExtEntry 2 } cpmProcExtInvoked OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times since cpmTimeCreated that the process has been invoked. This object is deprecated by cpmProcExtInvokedRev." ::= { cpmProcessExtEntry 3 } cpmProcExtRuntime OBJECT-TYPE SYNTAX Counter32 UNITS "microseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The amount of CPU time the process has used, in microseconds. This object is deprecated by cpmProcExtRuntimeRev." ::= { cpmProcessExtEntry 4 } cpmProcExtUtil5Sec OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 second period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil5SecRev which has the changed range of value (0..100)." ::= { cpmProcessExtEntry 5 } cpmProcExtUtil1Min OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 1 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil1MinRev which has the changed range of value (0..100)." ::= { cpmProcessExtEntry 6 } cpmProcExtUtil5Min OBJECT-TYPE SYNTAX Gauge32 (1..100) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object is deprecated by cpmProcExtUtil5MinRev which has the changed range of value (0..100)." ::= { cpmProcessExtEntry 7 } cpmProcExtPriority OBJECT-TYPE SYNTAX INTEGER { critical(1), high(2), normal(3), low(4), notAssigned(5) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The priority level at which the process is running. This object is deprecated by cpmProcExtPriorityRev." ::= { cpmProcessExtEntry 8 } cpmProcessExtRevTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmProcessExtRevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information that may or may not be available on all cisco devices. It contains additional objects for the more general cpmProcessTable. This object deprecates cpmProcessExtTable." ::= { cpmProcess 3 } cpmProcessExtRevEntry OBJECT-TYPE SYNTAX CpmProcessExtRevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional information for a particular process. This object deprecates cpmProcessExtEntry." INDEX { cpmCPUTotalIndex, cpmProcessPID } ::= { cpmProcessExtRevTable 1 } CpmProcessExtRevEntry ::= SEQUENCE { cpmProcExtMemAllocatedRev Gauge32, cpmProcExtMemFreedRev Gauge32, cpmProcExtInvokedRev Counter32, cpmProcExtRuntimeRev Counter32, cpmProcExtUtil5SecRev Gauge32, cpmProcExtUtil1MinRev Gauge32, cpmProcExtUtil5MinRev Gauge32, cpmProcExtPriorityRev INTEGER, cpmProcessType INTEGER, cpmProcessRespawn TruthValue, cpmProcessRespawnCount Counter32, cpmProcessRespawnAfterLastPatch Counter32, cpmProcessMemoryCore INTEGER, cpmProcessLastRestartUser SnmpAdminString, cpmProcessTextSegmentSize Unsigned32, cpmProcessDataSegmentSize Gauge32, cpmProcessStackSize Gauge32, cpmProcessDynamicMemorySize Gauge32, cpmProcExtMemAllocatedRevOvrflw Gauge32, cpmProcExtHCMemAllocatedRev CounterBasedGauge64, cpmProcExtMemFreedRevOvrflw Gauge32, cpmProcExtHCMemFreedRev CounterBasedGauge64, cpmProcessTextSegmentSizeOvrflw Unsigned32, cpmProcessHCTextSegmentSize Unsigned64, cpmProcessDataSegmentSizeOvrflw Gauge32, cpmProcessHCDataSegmentSize CounterBasedGauge64, cpmProcessStackSizeOvrflw Gauge32, cpmProcessHCStackSize CounterBasedGauge64, cpmProcessDynamicMemorySizeOvrflw Gauge32, cpmProcessHCDynamicMemorySize CounterBasedGauge64 } cpmProcExtMemAllocatedRev OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. The sum of freed memory is provided by cpmProcExtMemFreedRev. This object deprecates cpmProcExtMemAllocated." ::= { cpmProcessExtRevEntry 1 } cpmProcExtMemFreedRev OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all memory that this process has returned to the system. This object deprecates cpmProcExtMemFreed." ::= { cpmProcessExtRevEntry 2 } cpmProcExtInvokedRev OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times since cpmTimeCreated that the process has been invoked. This object deprecates cpmProcExtInvoked." ::= { cpmProcessExtRevEntry 3 } cpmProcExtRuntimeRev OBJECT-TYPE SYNTAX Counter32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of CPU time the process has used, in microseconds. This object deprecates cpmProcExtRuntime." ::= { cpmProcessExtRevEntry 4 } cpmProcExtUtil5SecRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 second period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil5Sec and increases the value range to (0..100)." ::= { cpmProcessExtRevEntry 5 } cpmProcExtUtil1MinRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 1 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil1Min and increases the value range to (0..100)." ::= { cpmProcessExtRevEntry 6 } cpmProcExtUtil5MinRev OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. It is determined as a weighted decaying average of the current idle time over the longest idle time. Note that this information should be used as an estimate only. This object deprecates cpmProcExtUtil5Min and increases the value range to (0..100)." ::= { cpmProcessExtRevEntry 7 } cpmProcExtPriorityRev OBJECT-TYPE SYNTAX INTEGER { critical(1), high(2), normal(3), low(4), notAssigned(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority level at which the process is running. This object deprecates cpmProcExtPriority." ::= { cpmProcessExtRevEntry 8 } cpmProcessType OBJECT-TYPE SYNTAX INTEGER { other(1), posix(2), ios(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the kind of process in context." ::= { cpmProcessExtRevEntry 9 } cpmProcessRespawn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether respawn of a process is enabled or not. If enabled the process in context repawns after it has crashed/stopped." ::= { cpmProcessExtRevEntry 10 } cpmProcessRespawnCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the number of times the process has respawned/restarted." ::= { cpmProcessExtRevEntry 11 } cpmProcessRespawnAfterLastPatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the number of times a process has restarted after the last patch is applied. This is to determine the stability of the last patch." ::= { cpmProcessExtRevEntry 12 } cpmProcessMemoryCore OBJECT-TYPE SYNTAX INTEGER { other(1), mainmem(2), mainmemSharedmem(3), mainmemText(4), mainmemTextSharedmem(5), sharedmem(6), sparse(7), off(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the part of process memory to be dumped when a process crashes. The process memory is used for debugging purposes to trace the root cause of the crash. sparse - Some operating systems support minimal dump of process core like register info, partial stack, partial memory pages especially for critical process to facilitate faster process restart." ::= { cpmProcessExtRevEntry 13 } cpmProcessLastRestartUser OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This indicate the user that has last restarted the process or has taken running coredump of the process." ::= { cpmProcessExtRevEntry 14 } cpmProcessTextSegmentSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the text memory of a process and all its shared objects." ::= { cpmProcessExtRevEntry 15 } cpmProcessDataSegmentSize OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the data segment of a process and all its shared objects." ::= { cpmProcessExtRevEntry 16 } cpmProcessStackSize OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of stack memory used by the process." ::= { cpmProcessExtRevEntry 17 } cpmProcessDynamicMemorySize OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of dynamic memory being used by the process." ::= { cpmProcessExtRevEntry 18 } cpmProcExtMemAllocatedRevOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmProcExtMemAllocatedRev. This object needs to be supported only when the value of cpmProcExtMemAllocatedRev exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmProcessExtRevEntry 19 } cpmProcExtHCMemAllocatedRev OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all the dynamically allocated memory that this process has received from the system. This includes memory that may have been returned. This object is a 64-bit version of cpmProcExtMemAllocatedRev." ::= { cpmProcessExtRevEntry 20 } cpmProcExtMemFreedRevOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmProcExtMemFreedRev. This object needs to be supported only when the value of cpmProcExtMemFreedRev exceeds 32-bit,otherwise this object value would be set to 0." ::= { cpmProcessExtRevEntry 21 } cpmProcExtHCMemFreedRev OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of all memory that this process has returned to the system. This object is a 64-bit version of cpmProcExtMemFreedRev." ::= { cpmProcessExtRevEntry 22 } cpmProcessTextSegmentSizeOvrflw OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmProcessTextSegmentSize. This object needs to be supported only when the value of cpmProcessTextSegmentSize exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmProcessExtRevEntry 23 } cpmProcessHCTextSegmentSize OBJECT-TYPE SYNTAX Unsigned64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the text memory of a process and all its shared objects. This object is a 64-bit version of cpmProcessTextSegmentSize." ::= { cpmProcessExtRevEntry 24 } cpmProcessDataSegmentSizeOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmProcessDataSegmentSize. This object needs to be supported only when the value of cpmProcessDataSegmentSize exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmProcessExtRevEntry 25 } cpmProcessHCDataSegmentSize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the data segment of a process and all its shared objects.. This object is a 64-bit version of cpmProcessDataSegmentSize." ::= { cpmProcessExtRevEntry 26 } cpmProcessStackSizeOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmProcessStackSize. This object needs to be supported only when the value of cpmProcessStackSize exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmProcessExtRevEntry 27 } cpmProcessHCStackSize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of stack memory used by the process. This object is a 64-bit version of cpmProcessStackSize." ::= { cpmProcessExtRevEntry 28 } cpmProcessDynamicMemorySizeOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmProcessDynamicMemorySize. This object needs to be supported only when the value of cpmProcessDynamicMemorySize exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmProcessExtRevEntry 29 } cpmProcessHCDynamicMemorySize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of dynamic memory being used by the process. This object is a 64-bit version of cpmProcessDynamicMemorySize." ::= { cpmProcessExtRevEntry 30 } -- Threshold Table allows the CPU threshold configurations. -- When the configured threshold is reached a NMS will be notified -- with this event. cpmCPUThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information about the thresholding values for CPU , configured by the user." ::= { cpmProcess 4 } cpmCPUThresholdEntry OBJECT-TYPE SYNTAX CpmCPUThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information about CPU thresholding parameters. cpmCPUTotalIndex identifies the CPU (or group of CPUs) for which this configuration applies." INDEX { cpmCPUTotalIndex, cpmCPUThresholdClass } ::= { cpmCPUThresholdTable 1 } CpmCPUThresholdEntry ::= SEQUENCE { cpmCPUThresholdClass INTEGER, cpmCPURisingThresholdValue Unsigned32, cpmCPURisingThresholdPeriod Unsigned32, cpmCPUFallingThresholdValue Unsigned32, cpmCPUFallingThresholdPeriod Unsigned32, cpmCPUThresholdEntryStatus RowStatus } cpmCPUThresholdClass OBJECT-TYPE SYNTAX INTEGER { total(1), interrupt(2), process(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Value of this object indicates the type of utilization, which is monitored. The total(1) indicates the total CPU utilization, interrupt(2) indicates the the CPU utilization in interrupt context and process(3) indicates the CPU utilization in the process level execution context." ::= { cpmCPUThresholdEntry 1 } cpmCPURisingThresholdValue OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage rising threshold value configured by the user. The value indicates, if the percentage CPU utilization is equal to or above this value for cpmCPURisingThresholdPeriod duration then send a cpmCPURisingThreshold notification to the NMS." ::= { cpmCPUThresholdEntry 2 } cpmCPURisingThresholdPeriod OBJECT-TYPE SYNTAX Unsigned32 (5..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This is an observation interval. The value of this object indicates that the CPU utilization should be above cpmCPURisingThresholdValue for this duration to send a cpmCPURisingThreshold notification to the NMS." DEFVAL { 5 } ::= { cpmCPUThresholdEntry 3 } cpmCPUFallingThresholdValue OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage falling threshold value configured by the user. The value indicates, if the percentage CPU utilization is equal to or below this value for cpmCPUFallingThresholdPeriod duration then send a cpmCPUFallingThreshold notification to the NMS." ::= { cpmCPUThresholdEntry 4 } cpmCPUFallingThresholdPeriod OBJECT-TYPE SYNTAX Unsigned32 (5..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This is an observation interval. The value of this object indicates that CPU utilization should be below cpmCPUFallingThresholdValue for this duration to send a cpmCPURisingThreshold notification to the NMS." DEFVAL { 5 } ::= { cpmCPUThresholdEntry 5 } cpmCPUThresholdEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { cpmCPUThresholdEntry 6 } cpmCPUHistoryThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The user configured value of this object gives the minimum percent CPU utilization of a process in the last cpmCPUMonInterval duration required to be a member of history table. When this object is changed the new value will have effect in the next interval." ::= { cpmCPUHistory 1 } cpmCPUHistorySize OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "A value configured by the user which specifies the number of reports in the history table. A report contains set of processes which crossed the cpmCPUHistoryThreshold in the last cpmCPUMonInterval along with the time at which this report is created, total and interrupt CPU utilizations. When this object is changed the new value will have effect in the next interval." ::= { cpmCPUHistory 2 } cpmCPUHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of CPU utilization history entries." ::= { cpmCPUHistory 3 } cpmCPUHistoryEntry OBJECT-TYPE SYNTAX CpmCPUHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A historical sample of CPU utilization statistics. cpmCPUTotalIndex identifies the CPU (or group of CPUs) for which this history is collected. When the cpmCPUHistorySize is reached the least recent entry is lost." INDEX { cpmCPUTotalIndex, cpmCPUHistoryReportId } ::= { cpmCPUHistoryTable 1 } CpmCPUHistoryEntry ::= SEQUENCE { cpmCPUHistoryReportId Unsigned32, cpmCPUHistoryReportSize Unsigned32, cpmCPUHistoryTotalUtil Gauge32, cpmCPUHistoryInterruptUtil Gauge32, cpmCPUHistoryCreatedTime TimeStamp } cpmCPUHistoryReportId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "All the entries which are created at the same time will have same value for this object. When the configured threshold for being a part of History table is reached then the qualified processes become the part of history table. The entries which became the part of history table at one instant will have the same value for this object. When this object reaches the max index value then it will wrap around." ::= { cpmCPUHistoryEntry 1 } cpmCPUHistoryReportSize OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of process entries in a report. This object gives information about how many processes became a part of history table at one instant." ::= { cpmCPUHistoryEntry 2 } cpmCPUHistoryTotalUtil OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Total percentage of CPU utilization at cpmCPUHistoryCreated." ::= { cpmCPUHistoryEntry 3 } cpmCPUHistoryInterruptUtil OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of CPU utilization in the interrupt context at cpmCPUHistoryCreated." ::= { cpmCPUHistoryEntry 4 } cpmCPUHistoryCreatedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Time stamp with respect to sysUpTime indicating the time at which this report is created." ::= { cpmCPUHistoryEntry 5 } cpmThreadTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmThreadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains generic information about POSIX threads in the device." ::= { cpmThread 1 } cpmThreadEntry OBJECT-TYPE SYNTAX CpmThreadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the general statistics of a POSIX thread." INDEX { cpmCPUTotalIndex, cpmProcessPID, cpmThreadID } ::= { cpmThreadTable 1 } CpmThreadEntry ::= SEQUENCE { cpmThreadID Unsigned32, cpmThreadName SnmpAdminString, cpmThreadPriority Unsigned32, cpmThreadState INTEGER, cpmThreadBlockingProcess RowPointer, cpmThreadCpuUtilization Gauge32, cpmThreadStackSize Gauge32, cpmThreadStackSizeOvrflw Gauge32, cpmThreadHCStackSize CounterBasedGauge64 } cpmThreadID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the thread ID. ThreadID is Unique per process." ::= { cpmThreadEntry 1 } cpmThreadName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the name of the thread. Thread names need not be unique. Hence statistics should be analyzed against thread ID." ::= { cpmThreadEntry 2 } cpmThreadPriority OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the priority of a POSIX thread. The higher the number, the higher the priority of the thread over other threads." ::= { cpmThreadEntry 3 } cpmThreadState OBJECT-TYPE SYNTAX INTEGER { other(1), dead(2), running(3), ready(4), stopped(5), send(6), receive(7), reply(8), stack(9), waitpage(10), sigsuspend(11), sigwaitinfo(12), nanosleep(13), mutex(14), condvar(15), join(16), intr(17), sem(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current state of a thread. Running state means that the thread is actively consumig CPU. All the other states are just waiting states. The valid states are: other - Any other state apart from the listed ones. dead - Kernel is waiting to release the thread's resources. running - Actively running on a CPU. ready - Not running on a CPU, but is ready to run (one or more higher or equal priority threads are running). stopped - Suspended (SIGSTOP signal). send - Waiting for a server to receive a message. receive - Waiting for a client to send a message. reply - Waiting for a server to reply to a message. stack - Waiting for more stack to be allocated. waitpage - Waiting for process manager to resolve a fault on a page. sigsuspend - Suspended for a signal. sigwaitinfo - Waiting for a signal. nanosleep - Sleeping for a period of time. mutex - Waiting to acquire a mutex condvar - Waiting for a condition variable to be signalled. join - Waiting for the completion of another thread. intr - Waiting for an interrupt. sem - Waiting to acquire a semaphore." ::= { cpmThreadEntry 4 } cpmThreadBlockingProcess OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the process on which the current thread is blocked on. This points to the cpmProcessTable of the process on which the thread in context is blocked. This is valid only to threads which are either in send/reply states. For the rest of the threads it is returned as 0.0" ::= { cpmThreadEntry 5 } cpmThreadCpuUtilization OBJECT-TYPE SYNTAX Gauge32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a general idea on how busy the thread in context caused the processor to be." ::= { cpmThreadEntry 6 } cpmThreadStackSize OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the stack size allocated to the thread in context." ::= { cpmThreadEntry 7 } cpmThreadStackSizeOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmThreadStackSize. This object needs to be supported only when the value of cpmThreadStackSize exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmThreadEntry 8 } cpmThreadHCStackSize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the stack size allocated to the thread in context. This object is a 64-bit version of cpmThreadStackSize." ::= { cpmThreadEntry 9 } cpmVirtualProcessTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmVirtualProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about virtual processes in a virtual machine." ::= { cpmVirtualProcess 1 } cpmVirtualProcessEntry OBJECT-TYPE SYNTAX CpmVirtualProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing the general statistics of a virtual process in a virtual machine." INDEX { cpmCPUTotalIndex, cpmProcessPID, cpmVirtualProcessID } ::= { cpmVirtualProcessTable 1 } CpmVirtualProcessEntry ::= SEQUENCE { cpmVirtualProcessID Unsigned32, cpmVirtualProcessName SnmpAdminString, cpmVirtualProcessUtil5Sec Gauge32, cpmVirtualProcessUtil1Min Gauge32, cpmVirtualProcessUtil5Min Gauge32, cpmVirtualProcessMemAllocated Gauge32, cpmVirtualProcessMemFreed Gauge32, cpmVirtualProcessInvokeCount Counter32, cpmVirtualProcessRuntime Counter32, cpmVirtualProcessMemAllocatedOvrflw Gauge32, cpmVirtualProcessHCMemAllocated CounterBasedGauge64, cpmVirtualProcessMemFreedOvrflw Gauge32, cpmVirtualProcessHCMemFreed CounterBasedGauge64 } cpmVirtualProcessID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the process ID of a virtual process. PID is unique only inside one address space. Virtual process PID should be considered along with Parent process cpmProcessPID." ::= { cpmVirtualProcessEntry 1 } cpmVirtualProcessName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of a virtual process. If the name is longer than 32 characters, it will be truncated to the first 31 characters, and a `*' will be appended as the last character to imply this is a truncated process name." ::= { cpmVirtualProcessEntry 2 } cpmVirtualProcessUtil5Sec OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an estimated CPU utilization by a virtual process over the last 5 seconds." ::= { cpmVirtualProcessEntry 3 } cpmVirtualProcessUtil1Min OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an estimated CPU utilization by a virtual process over the last one minute." ::= { cpmVirtualProcessEntry 4 } cpmVirtualProcessUtil5Min OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates an estimated CPU utilization by a virtual process over the last 5 minutes." ::= { cpmVirtualProcessEntry 5 } cpmVirtualProcessMemAllocated OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the memory allocated by the virtual process inside the address space of a process running on Native OS." ::= { cpmVirtualProcessEntry 6 } cpmVirtualProcessMemFreed OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the memory freed by the virtual process inside the address space of a process running on Native OS." ::= { cpmVirtualProcessEntry 7 } cpmVirtualProcessInvokeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a virtual process is invoked." ::= { cpmVirtualProcessEntry 8 } cpmVirtualProcessRuntime OBJECT-TYPE SYNTAX Counter32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of CPU time a virtual process has used in microseconds." ::= { cpmVirtualProcessEntry 9 } cpmVirtualProcessMemAllocatedOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmVirtualProcessMemAllocated. This object needs to be supported only when the value of cpmVirtualProcessMemAllocated exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmVirtualProcessEntry 10 } cpmVirtualProcessHCMemAllocated OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the memory allocated by the virtual process inside the address space of a process running on Native OS. This object is a 64-bit version of cpmVirtualProcessMemAllocated." ::= { cpmVirtualProcessEntry 11 } cpmVirtualProcessMemFreedOvrflw OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of cpmVirtualProcessMemFreed. This object needs to be supported only when the value of cpmVirtualProcessMemFreed exceeds 32-bit, otherwise this object value would be set to 0." ::= { cpmVirtualProcessEntry 12 } cpmVirtualProcessHCMemFreed OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the memory freed by the virtual process inside the address space of a process running on Native OS.This object is a 64-bit version of cpmVirtualProcessMemAllocated." ::= { cpmVirtualProcessEntry 13 } -- History table contains the statistics for the processes -- qualified to be a part of history table. -- The statistics are the CPU utilization of processes -- for past 5 second period. cpmCPUProcessHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CpmCPUProcessHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of process history entries. This table contains CPU utilization of processes which crossed the cpmCPUHistoryThreshold." ::= { cpmCPUHistory 4 } cpmCPUProcessHistoryEntry OBJECT-TYPE SYNTAX CpmCPUProcessHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A historical sample of process utilization statistics. The entries in this table will have corresponding entires in the cpmCPUHistoryTable. The entries in this table get deleted when the entry associated with this entry in the cpmCPUHistoryTable gets deleted." INDEX { cpmCPUTotalIndex, cpmCPUHistoryReportId, cpmCPUProcessHistoryIndex } ::= { cpmCPUProcessHistoryTable 1 } CpmCPUProcessHistoryEntry ::= SEQUENCE { cpmCPUProcessHistoryIndex Unsigned32, cpmCPUHistoryProcId Unsigned32, cpmCPUHistoryProcName DisplayString, cpmCPUHistoryProcCreated TimeStamp, cpmCPUHistoryProcUtil Gauge32 } cpmCPUProcessHistoryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the cmpCPUProcessHistory table among those in the same report. This index is between 1 to N, where N is the cpmCPUHistoryReportSize." ::= { cpmCPUProcessHistoryEntry 1 } cpmCPUHistoryProcId OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The process Id associated with this entry." ::= { cpmCPUProcessHistoryEntry 2 } cpmCPUHistoryProcName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The process name associated with this entry." ::= { cpmCPUProcessHistoryEntry 3 } cpmCPUHistoryProcCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the process was created. The process ID and the time when the process was created, uniquely identifies a process." ::= { cpmCPUProcessHistoryEntry 4 } cpmCPUHistoryProcUtil OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage CPU utilization of a process at cpmCPUHistoryCreatedTime." ::= { cpmCPUProcessHistoryEntry 5 } -- notifications ciscoProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { ciscoProcessMIB 2 } ciscoProcessMIBNotifs OBJECT IDENTIFIER ::= { ciscoProcessMIBNotifPrefix 0 } cpmCPURisingThreshold NOTIFICATION-TYPE OBJECTS { cpmCPURisingThresholdValue, cpmCPUTotalMonIntervalValue, cpmCPUInterruptMonIntervalValue, cpmProcExtUtil5SecRev, cpmProcessTimeCreated } STATUS current DESCRIPTION "A cpmCPURisingThreshold notification is sent when configured rising CPU utilization threshold (cpmCPURisingThresholdValue) is reached and CPU utilization remained above the threshold for configured interval(cpmCPURisingThresholdPeriod) and such a notification is requested. The cpmProcExtUtil5SecRev and cpmProcessTimeCreated objects can be repeated multiple times in a notification indicating the top users of CPU." ::= { ciscoProcessMIBNotifs 1 } cpmCPUFallingThreshold NOTIFICATION-TYPE OBJECTS { cpmCPUFallingThresholdValue, cpmCPUTotalMonIntervalValue, cpmCPUInterruptMonIntervalValue } STATUS current DESCRIPTION "A cpmCPUFallingThresholdTrap is sent when the configured falling threshold (cpmCPURisingThresholdValue) is reached and CPU utilization remained under threshold for configured interval (cpmCPUFallingThresholdPeriod) and such a notification is requested." ::= { ciscoProcessMIBNotifs 2 } -- conformance information ciscoProcessMIBConformance OBJECT IDENTIFIER ::= { ciscoProcessMIB 3 } cpmCompliances OBJECT IDENTIFIER ::= { ciscoProcessMIBConformance 1 } cpmGroups OBJECT IDENTIFIER ::= { ciscoProcessMIBConformance 2 } cProcessMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This is deprecated and new compliance cProcessMIBComplianceRev is added." MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroup, cpmProcessGroup } GROUP cpmProcessExtGroup DESCRIPTION "The cpmProcessExtGroup is optional for all entities." OBJECT cpmProcExtPriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { cpmCompliances 1 } cProcessMIBComplianceRev MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBCompliance." MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroupRev, cpmProcessGroupRev } GROUP cpmProcessExtGroupRev DESCRIPTION "The cpmProcessExtGroupRev is optional for all entities. This object is defined after deprecating cpmProcessExtGroup." ::= { cpmCompliances 2 } cProcessMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev." MODULE -- this module MANDATORY-GROUPS { cpmCPUThresholdGroup, cpmCPUTotalGroupRev1 } GROUP cpmCPUHistoryGroup DESCRIPTION "The cpmCPUHistoryGroup is optional and gives the information about process CPU utilization history." GROUP cpmCPUThresholdNotificationGroup DESCRIPTION "The cpmCPUThresholdNotificationGroup is optional and these traps indicates that configured threshold is reached." ::= { cpmCompliances 3 } cProcessMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev1." MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroupRev1 } GROUP cpmCPUHistoryGroup DESCRIPTION "The cpmCPUHistoryGroup is optional and gives the information about process CPU utilization history." GROUP cpmCPUThresholdNotificationGroup DESCRIPTION "The cpmCPUThresholdNotificationGroup is optional and these traps indicates that configured threshold is reached." GROUP cpmProcessExtGroupRev DESCRIPTION "The cpmProcessExtGroupRev is optional and gives detailed process monitoring information." GROUP cpmCPUThresholdGroup DESCRIPTION "The cpmCPUThresholdGroup is optional and provides information on configuring threshold values." GROUP cpmProcessGroupRev DESCRIPTION "The cpmProcessGroupRev is optional and provides common process monitoring information." GROUP cpmCPUPosixMemoryGroup DESCRIPTION "The cpmCPUPosixMemoryGroup gives information about CPU wide system memory of POSIX OS. cpmCPUPosixMemoryGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmPosixProcessGroup DESCRIPTION "The cpmPosixProcessGroup gives information about POSIX process. cpmPosixProcessGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmThreadGroup DESCRIPTION "The cpmThreadGroup gives information about POSIX threads. cpmThreadGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmVirtualProcessGroup DESCRIPTION "The cpmVirtualProcessGroup gives information about virtual process. cpmVirtualProcessGroup is mandatory Operating System of the managed system supports Posix standard kernel." ::= { cpmCompliances 4 } cProcessMIBComplianceRev3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev2." MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroupRev1 } GROUP cpmCPUHistoryGroup DESCRIPTION "The cpmCPUHistoryGroup is optional and gives the information about process CPU utilization history." GROUP cpmCPUThresholdNotificationGroup DESCRIPTION "The cpmCPUThresholdNotificationGroup is optional and these traps indicates that configured threshold is reached." GROUP cpmProcessExtGroupRev DESCRIPTION "The cpmProcessExtGroupRev is optional and gives detailed process monitoring information." GROUP cpmCPUThresholdGroup DESCRIPTION "The cpmCPUThresholdGroup is optional and provides information on configuring threshold values." GROUP cpmProcessGroupRev DESCRIPTION "The cpmProcessGroupRev is optional and provides common process monitoring information." GROUP cpmCPUPosixMemoryGroup DESCRIPTION "The cpmCPUPosixMemoryGroup gives information about CPU wide system memory of POSIX OS. cpmCPUPosixMemoryGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmPosixProcessGroup DESCRIPTION "The cpmPosixProcessGroup gives information about POSIX process. cpmPosixProcessGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmThreadGroup DESCRIPTION "The cpmThreadGroup gives information about POSIX threads. cpmThreadGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmVirtualProcessGroup DESCRIPTION "The cpmVirtualProcessGroup gives information about virtual process. cpmVirtualProcessGroup is mandatory Operating System of the managed system supports Posix standard kernel." GROUP cpmCPUTotalOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmCPUTotalHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmProcessExtRevOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmProcessExtRevHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmThreadOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmThreadHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmVirtualProcessOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmVirtualProcessHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." ::= { cpmCompliances 5 } cProcessMIBComplianceRev4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev3." MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroupRev1 } GROUP cpmCPUHistoryGroup DESCRIPTION "The cpmCPUHistoryGroup is optional and gives the information about process CPU utilization history." GROUP cpmCPUThresholdNotificationGroup DESCRIPTION "The cpmCPUThresholdNotificationGroup is optional and these traps indicates that configured threshold is reached." GROUP cpmProcessExtGroupRev DESCRIPTION "The cpmProcessExtGroupRev is optional and gives detailed process monitoring information." GROUP cpmCPUThresholdGroup DESCRIPTION "The cpmCPUThresholdGroup is optional and provides information on configuring threshold values." GROUP cpmProcessGroupRev DESCRIPTION "The cpmProcessGroupRev is optional and provides common process monitoring information." GROUP cpmCPUPosixMemoryGroup DESCRIPTION "The cpmCPUPosixMemoryGroup gives information about CPU wide system memory of POSIX OS. cpmCPUPosixMemoryGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmPosixProcessGroup DESCRIPTION "The cpmPosixProcessGroup gives information about POSIX process. cpmPosixProcessGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmThreadGroup DESCRIPTION "The cpmThreadGroup gives information about POSIX threads. cpmThreadGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmVirtualProcessGroup DESCRIPTION "The cpmVirtualProcessGroup gives information about virtual process.cpmVirtualProcessGroup is mandatory Operating System of the managed system supports Posix standard kernel." GROUP cpmCPUTotalOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmCPUTotalHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmProcessExtRevOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmProcessExtRevHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmThreadOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmThreadHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmVirtualProcessOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmVirtualProcessHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmCPULoadAvgGroup DESCRIPTION "The cpmCPULoadAvgGroup is optional and provides CPU load average information.This Group is valid only for the device which supports it." ::= { cpmCompliances 6 } cProcessMIBComplianceRev5 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco Process MIB. This compliance module deprecates cProcessMIBComplianceRev4" MODULE -- this module MANDATORY-GROUPS { cpmCPUTotalGroupRev1 } GROUP cpmCPUHistoryGroup DESCRIPTION "The cpmCPUHistoryGroup is optional and gives the information about process CPU utilization history." GROUP cpmCPUThresholdNotificationGroup DESCRIPTION "The cpmCPUThresholdNotificationGroup is optional and these traps indicates that configured threshold is reached." GROUP cpmProcessExtGroupRev DESCRIPTION "The cpmProcessExtGroupRev is optional and gives detailed process monitoring information." GROUP cpmCPUThresholdGroup DESCRIPTION "The cpmCPUThresholdGroup is optional and provides information on configuring threshold values." GROUP cpmProcessGroupRev DESCRIPTION "The cpmProcessGroupRev is optional and provides common process monitoring information." GROUP cpmCPUPosixMemoryGroup DESCRIPTION "The cpmCPUPosixMemoryGroup gives information about CPU wide system memory of POSIX OS. cpmCPUPosixMemoryGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmPosixProcessGroup DESCRIPTION "The cpmPosixProcessGroup gives information about POSIX process. cpmPosixProcessGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmThreadGroup DESCRIPTION "The cpmThreadGroup gives information about POSIX threads. cpmThreadGroup is mandatory if the Operating System of the managed system supports Posix standard kernel." GROUP cpmVirtualProcessGroup DESCRIPTION "The cpmVirtualProcessGroup gives information about virtual process.cpmVirtualProcessGroup is mandatory Operating System of the managed system supports Posix standard kernel." GROUP cpmCPUTotalOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmCPUTotalHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmProcessExtRevOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmProcessExtRevHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmThreadOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmThreadHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmVirtualProcessOverflowGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system." GROUP cpmVirtualProcessHCGroup DESCRIPTION "This group is an optional group for the devices which run on 32-bit operating system" GROUP cpmCPULoadAvgGroup DESCRIPTION "The cpmCPULoadAvgGroup is optional and provides CPU load average information.This Group is valid only for the device which supports it" GROUP cpmCPUTotalMemoryCommitGroup DESCRIPTION "The cpmCPUTotalMemoryCommitGroup is optional and provides system Committed memory information.This Group is valid only for the device which supports it." ::= { cpmCompliances 7 } -- units of conformance cpmCPUTotalGroup OBJECT-GROUP OBJECTS { cpmCPUTotalPhysicalIndex, cpmCPUTotal5sec, cpmCPUTotal1min, cpmCPUTotal5min } STATUS deprecated DESCRIPTION "A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group is deprecated since the objects cpmCPUTotal5sec, cpmCPUTotal1min and cpmCPUTotal5min are deprecated. A new object cpmCPUTotalGroupRev is added in place of it." ::= { cpmGroups 1 } cpmProcessGroup OBJECT-GROUP OBJECTS { cpmProcessPID, cpmProcessName, cpmProcessuSecs, cpmProcessTimeCreated } STATUS deprecated DESCRIPTION "A collection of objects providing common process monitoring information. This group is mandatory for all cisco devices. This object is deprecated by cpmProcessGroupRev." ::= { cpmGroups 2 } cpmProcessExtGroup OBJECT-GROUP OBJECTS { cpmProcExtMemAllocated, cpmProcExtMemFreed, cpmProcExtInvoked, cpmProcExtRuntime, cpmProcExtUtil5Sec, cpmProcExtUtil1Min, cpmProcExtUtil5Min, cpmProcExtPriority } STATUS deprecated DESCRIPTION "A collection of objects providing additional and more detailed process monitoring information. This group is mandatory for all cisco devices that have the internal capability to keep this information. This group is deprecated and new group cpmProcessExtGroupRev is added." ::= { cpmGroups 3 } cpmCPUTotalGroupRev OBJECT-GROUP OBJECTS { cpmCPUTotalPhysicalIndex, cpmCPUTotal5secRev, cpmCPUTotal1minRev, cpmCPUTotal5minRev } STATUS deprecated DESCRIPTION "A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group deprecates cpmCPUTotalGroup. This group is deprecated since the object cpmCPUTotal5secRev is deprecated. A new object cpmCPUTotalGroupRev1 is added in place of it." ::= { cpmGroups 4 } cpmProcessExtGroupRev OBJECT-GROUP OBJECTS { cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev, cpmProcExtInvokedRev, cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev, cpmProcExtUtil5MinRev, cpmProcExtPriorityRev } STATUS current DESCRIPTION "A collection of objects providing additional and more detailed process monitoring information. This group is mandatory for all cisco devices that have the internal capability to keep this information. This group is formed after deprecating cpmProcessExtGroup. cpmProcExtMemAllocatedRev, cpmProcExtMemFreedRev, cpmProcExtInvokedRev, cpmProcExtRuntimeRev, cpmProcExtUtil5SecRev, cpmProcExtUtil1MinRev and cpmProcExtUtil5MinRev are the new objects added." ::= { cpmGroups 5 } cpmProcessGroupRev OBJECT-GROUP OBJECTS { cpmProcessPID, cpmProcessName, cpmProcessAverageUSecs, cpmProcessTimeCreated } STATUS current DESCRIPTION "A collection of objects providing common process monitoring information. This group is mandatory for all cisco devices. This object deprecates cpmProcessGroup." ::= { cpmGroups 6 } cpmCPUTotalGroupRev1 OBJECT-GROUP OBJECTS { cpmCPUTotalPhysicalIndex, cpmCPUTotal1minRev, cpmCPUTotal5minRev, cpmCPUMonInterval, cpmCPUTotalMonIntervalValue, cpmCPUInterruptMonIntervalValue } STATUS current DESCRIPTION "A collection of objects providing CPU load monitoring information. This group is mandatory for all cisco devices. This group deprecates cpmCPUTotalGroupRev." ::= { cpmGroups 7 } cpmCPUThresholdGroup OBJECT-GROUP OBJECTS { cpmCPURisingThresholdValue, cpmCPURisingThresholdPeriod, cpmCPUFallingThresholdValue, cpmCPUFallingThresholdPeriod, cpmCPUThresholdEntryStatus } STATUS current DESCRIPTION "A collection of objects used for configuration of thresholding." ::= { cpmGroups 8 } cpmCPUHistoryGroup OBJECT-GROUP OBJECTS { cpmCPUHistorySize, cpmCPUHistoryThreshold, cpmCPUHistoryTotalUtil, cpmCPUHistoryInterruptUtil, cpmCPUHistoryCreatedTime, cpmCPUHistoryReportSize, cpmCPUHistoryProcId, cpmCPUHistoryProcName, cpmCPUHistoryProcCreated, cpmCPUHistoryProcUtil } STATUS current DESCRIPTION "A collection of objects providing information about CPU utilization history." ::= { cpmGroups 9 } cpmCPUThresholdNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { cpmCPURisingThreshold, cpmCPUFallingThreshold } STATUS current DESCRIPTION "A group of notifications." ::= { cpmGroups 10 } cpmCPUPosixMemoryGroup OBJECT-GROUP OBJECTS { cpmCPUMemoryUsed, cpmCPUMemoryFree, cpmCPUMemoryKernelReserved, cpmCPUMemoryLowest } STATUS current DESCRIPTION "A collection of common objects providing CPU wide System memory information running POSIX compliant OS." ::= { cpmGroups 11 } cpmPosixProcessGroup OBJECT-GROUP OBJECTS { cpmProcessType, cpmProcessRespawn, cpmProcessRespawnCount, cpmProcessRespawnAfterLastPatch, cpmProcessMemoryCore, cpmProcessLastRestartUser, cpmProcessTextSegmentSize, cpmProcessDataSegmentSize, cpmProcessStackSize, cpmProcessDynamicMemorySize } STATUS current DESCRIPTION "A collection of common objects providing Process information on devices running POSIX compliant OS." ::= { cpmGroups 12 } cpmThreadGroup OBJECT-GROUP OBJECTS { cpmThreadName, cpmThreadPriority, cpmThreadState, cpmThreadBlockingProcess, cpmThreadCpuUtilization, cpmThreadStackSize } STATUS current DESCRIPTION "A collection of objects providing thread information information on devices running POSIX compliant OS." ::= { cpmGroups 13 } cpmVirtualProcessGroup OBJECT-GROUP OBJECTS { cpmVirtualProcessName, cpmVirtualProcessUtil5Sec, cpmVirtualProcessUtil1Min, cpmVirtualProcessUtil5Min, cpmVirtualProcessMemAllocated, cpmVirtualProcessMemFreed, cpmVirtualProcessInvokeCount, cpmVirtualProcessRuntime } STATUS current DESCRIPTION "A collection of objects providing virtual process information on devices that can run virtual machines." ::= { cpmGroups 14 } cpmCPUTotalOverflowGroup OBJECT-GROUP OBJECTS { cpmCPUMemoryUsedOvrflw, cpmCPUMemoryFreeOvrflw, cpmCPUMemoryKernelReservedOvrflw, cpmCPUMemoryLowestOvrflw } STATUS current DESCRIPTION "A collection of Overflow (Ovrflw) objects providing CPU load monitoring information." ::= { cpmGroups 15 } cpmCPUTotalHCGroup OBJECT-GROUP OBJECTS { cpmCPUMemoryHCUsed, cpmCPUMemoryHCFree, cpmCPUMemoryHCKernelReserved, cpmCPUMemoryHCLowest } STATUS current DESCRIPTION "A collection of High Capacity (HC) objects providing CPU load monitoring information." ::= { cpmGroups 16 } cpmProcessExtRevOverflowGroup OBJECT-GROUP OBJECTS { cpmProcExtMemAllocatedRevOvrflw, cpmProcExtMemFreedRevOvrflw, cpmProcessTextSegmentSizeOvrflw, cpmProcessDataSegmentSizeOvrflw, cpmProcessStackSizeOvrflw, cpmProcessDynamicMemorySizeOvrflw } STATUS current DESCRIPTION "A collection of Overflow objects providing additional and more detailed process monitoring information." ::= { cpmGroups 17 } cpmProcessExtRevHCGroup OBJECT-GROUP OBJECTS { cpmProcExtHCMemAllocatedRev, cpmProcExtHCMemFreedRev, cpmProcessHCTextSegmentSize, cpmProcessHCDataSegmentSize, cpmProcessHCStackSize, cpmProcessHCDynamicMemorySize } STATUS current DESCRIPTION "A collection of High Capacity objects providing additional and more detailed process monitoring information." ::= { cpmGroups 18 } cpmThreadOverflowGroup OBJECT-GROUP OBJECTS { cpmThreadStackSizeOvrflw } STATUS current DESCRIPTION "A collection of Overflow objects providing thread information on devices running POSIX compliant OS." ::= { cpmGroups 19 } cpmThreadHCGroup OBJECT-GROUP OBJECTS { cpmThreadHCStackSize } STATUS current DESCRIPTION "A collection of High Capacity objects providing thread information on devices running POSIX compliant OS." ::= { cpmGroups 20 } cpmVirtualProcessOverflowGroup OBJECT-GROUP OBJECTS { cpmVirtualProcessMemAllocatedOvrflw, cpmVirtualProcessMemFreedOvrflw } STATUS current DESCRIPTION "A collection of Overflow objects providing virtual process information on devices that can run virtual machines." ::= { cpmGroups 21 } cpmVirtualProcessHCGroup OBJECT-GROUP OBJECTS { cpmVirtualProcessHCMemAllocated, cpmVirtualProcessHCMemFreed } STATUS current DESCRIPTION "A collection of High Capacity objects providing virtual process information on devices that can run virtual machines." ::= { cpmGroups 22 } cpmCPULoadAvgGroup OBJECT-GROUP OBJECTS { cpmCPULoadAvg1min, cpmCPULoadAvg5min, cpmCPULoadAvg15min } STATUS current DESCRIPTION "A collection of objects providing CPU load average information" ::= { cpmGroups 23 } cpmCPUTotalMemoryCommitGroup OBJECT-GROUP OBJECTS { cpmCPUMemoryCommitted, cpmCPUMemoryCommittedOvrflw, cpmCPUMemoryHCCommitted } STATUS current DESCRIPTION "A collection of objects providing CPU system Committed memory information." ::= { cpmGroups 24 } END