-- ********************************************************************* -- CISCO-PORT-TRACK-MIB.my: Cisco Port Track Mib -- -- July 2004, Charuhas Ghatge -- -- Copyright (c) 2004 by cisco Systems, Inc. -- All rights reserved. -- -- ********************************************************************* -- Terminology -- Tracked-Port: It is a port whose operational state is -- continuosly monitored. The operation state -- (i.e. ifOperState) of the tracked-port is used to -- alter the operational state of one or more ports. -- -- Linked-Port: One or more ports are termed as -- linked-ports, when the operational state of -- these ports is altered based on the operational -- state of the tracked-ports. -- -- VSAN: Virtual Storage Area Network -- CISCO-PORT-TRACK-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TruthValue, RowStatus FROM SNMPv2-TC InterfaceIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI VsanIndex FROM CISCO-ST-TC; ciscoPortTrackMIB MODULE-IDENTITY LAST-UPDATED "200504270000Z" ORGANIZATION "Cisco Systems Inc. " CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com" DESCRIPTION "A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the outage. The loss of this link may be an indirect failure to the end devices attached to the switch. The concept behind the Port-Track feature is to create a direct failure on the ports connected to end devices on event of such indirect failures. One more ports can be 'tracked' in terms of their operational status. The cptPortTrackTable lets the user associate which port(s) need to be tracked to the ports that will be tracking them. cptPortForceShutTable, lets the user configure the forced-shut mode of the linked-port." REVISION "200504270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 437 } ciscoPortTrackObjects OBJECT IDENTIFIER ::= { ciscoPortTrackMIB 1 } cptMIBConformance OBJECT IDENTIFIER ::= { ciscoPortTrackMIB 2 } cptConfig OBJECT IDENTIFIER ::= { ciscoPortTrackObjects 1 } -- -- cptPortTrackTable -- cptPortTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF CptPortTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the linked ports and the configurations of their associated tracked ports. The configuration of each tracked port includes its interface index as well as a VSAN index if only one VSAN is to be tracked." ::= { cptConfig 1 } cptPortTrackEntry OBJECT-TYPE SYNTAX CptPortTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cptPortTrack Table." INDEX {cptPortTrackLinkedPort,cptPortTrackTrackedPort} ::= { cptPortTrackTable 1 } CptPortTrackEntry ::= SEQUENCE { cptPortTrackLinkedPort InterfaceIndex, cptPortTrackTrackedPort InterfaceIndex, cptPortTrackVsanType INTEGER, cptPortTrackVsanIndex VsanIndex, cptPortTrackRowStatus RowStatus } cptPortTrackLinkedPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the port that will be tracking the cptPortTrackTrackedPort." ::= { cptPortTrackEntry 1 } cptPortTrackTrackedPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the port that needs to be tracked." ::= { cptPortTrackEntry 2 } cptPortTrackVsanType OBJECT-TYPE SYNTAX INTEGER { singleVsan(1), allVsans(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This objects denotes whether a single VSAN is being tracked on cptPortTrackTrackedPort or all the VSANs on that port are tracked. If the set to 'singleVsan', then the VSAN that will be tracked will be denoted by the instance of cptPortTrackVsanIndex." ::= { cptPortTrackEntry 3 } cptPortTrackVsanIndex OBJECT-TYPE SYNTAX VsanIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Valid only if the instance of cptPortTrackVsanType is 'singleVsan'. If cptPortTrackVsanType is 'allVsans', the instance of this object is irrelevant. " ::= { cptPortTrackEntry 4 } cptPortTrackRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create or delete the row. When creating a row, the object cptPortTrackVsanType must be specified. If the value of cptPortTrackVsanType is 'singleVsan' then the object cptPortTrackVsanIndex also must be specified. If the value of cptPortTrackVsanType is 'allVsans', then cptPortTrackVsanIndex should not be specified in the create request." ::= { cptPortTrackEntry 5 } -- -- cptPortForceShutTable -- cptPortForceShutTable OBJECT-TYPE SYNTAX SEQUENCE OF CptPortForceShutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to configure the forced-shut state for each linked port." ::= { cptConfig 2 } cptPortForceShutEntry OBJECT-TYPE SYNTAX CptPortForceShutEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cptPortForceShutTable." INDEX { cptPortTrackLinkedPort } ::= { cptPortForceShutTable 1 } CptPortForceShutEntry ::= SEQUENCE { cptPortForceState TruthValue } cptPortForceState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The forced-shut state of the linked port. When all the tracked ports corresponding to cptPortTrackLinkedPort, go down, cptPortTrackLinkedPort is brought down. The cptPortForceState, determines the manner in which this operation is performed. If 'false', cptPortTrackLinkedPort is brought down operationally only and is brought up again as soon as any one of the tracked ports comes up. If 'true', cptPortTrackLinkedPort is brought down administratively as well and the user has to manually bring the port up. i.e. the ifAdminStatus cptPortTrackLinkedPort needs to be set to 'up' by the user." DEFVAL { false } ::= { cptPortForceShutEntry 1 } -- conformance information cptMIBCompliances OBJECT IDENTIFIER ::= { cptMIBConformance 1 } cptMIBGroups OBJECT IDENTIFIER ::= { cptMIBConformance 2 } cptMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the portrack management mib." MODULE MANDATORY-GROUPS { cptTrackGroup, cptShutGroup } ::= { cptMIBCompliances 1 } -- Units of Conformance cptTrackGroup OBJECT-GROUP OBJECTS { cptPortTrackVsanType, cptPortTrackVsanIndex, cptPortTrackRowStatus } STATUS current DESCRIPTION "Object group for the porttrack feature." ::= { cptMIBGroups 1 } cptShutGroup OBJECT-GROUP OBJECTS { cptPortForceState } STATUS current DESCRIPTION "Object group for the forced-shut feature." ::= { cptMIBGroups 2 } END