-- ***************************************************************** -- Cisco Port QoS MIB file. -- -- November 2000, Ranbir Parmar -- -- Copyright (c) 2000-2008 by Cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-PORT-QOS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64, Gauge32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TruthValue, TimeStamp FROM SNMPv2-TC ifIndex FROM IF-MIB vtpVlanIndex FROM CISCO-VTP-MIB ciscoMgmt FROM CISCO-SMI Dscp, QosLayer2Cos FROM CISCO-QOS-PIB-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB; ciscoPortQosMIB MODULE-IDENTITY LAST-UPDATED "200809100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134-1706 USA Tel: +1 800 553-NETS E-mail: cs-port-qos@cisco.com" DESCRIPTION "Cisco PORT QOS MIB - Overview This MIB module is for the management of Cisco's per port rate-limiting and traffic shaping on L3 switch/Router Platform(s). Per-port rate-limiting is a traffic control method. A set of rate limits are applied to the traffic traversing an interface. Each rate limit has a configurable action that is taken when rate limiting criteria is met. Per-port traffic shaping is a traffic control method. The user can restrict the amount of traffic coming out of a physical port. Excess traffic is buffered within the router/switch to the extent possible. A class represents a class of traffic. It is defined via the specification of the packet matching criteria that identifies packets that are to belong to the class. Class-default: In addition to user defined classes, a pre-existing class named 'class-default' exists to represent all packets that do not match any of the user defined classes. This class-default exists so that policies can be defined for this group of packets that do not match any user defined classes. Actions are individual policies (e.g.: policing) that can be applied to a traffic class. A policy represents a set of actions that are to be applied to a set of traffic classes. The policy is associated with a target (like a port) and the direction of traffic on that target to which the policy is to be applied. A hierarchical policy is one in which an entire policy is directly assigned to a class of traffic. Thus, a hierarchical policy is a nested policy that contains a set of the pair of a child-policy and the traffic-class to which it is applied. DSCP (Differentiated Services Code Point) is the six most significant bits of the ToS field in a IP packet header. CoS (Class of Service) is the three bits in the layer 2 header that indicates user priority value assigned to this packet. This MIB module also provides per port QoS statistics." REVISION "200809100000Z" DESCRIPTION "Added the following tables: cportQosEgressQueueStatsTable, cportQosClassEgressStatsTable, cportQosClassIngressStatsTable, cportQosDscpStatsTable and cportQosCosStatsTable. Deprecated ciscoPortQosMIBComplianceRev5 added ciscoPortQosMIBComplianceRev6." REVISION "200803050000Z" DESCRIPTION "Added cportQosVlanInProfPolicyOctets, cportQosVlanOutOfProfPolicyOctets, cportQosVlanViolateProfPolicyPkts and cportQosVlanViolateProfPolicyOctets to the cportQosInVlanStatsTable." REVISION "200801090000Z" DESCRIPTION "Added cportQosInProfPolicyOctets, cportQosOutOfProfPolicyOctets, cportQosViolateProfPolicyPkts and cportQosViolateProfPolicyOctets to the cportQosStatsTable." REVISION "200602170000Z" DESCRIPTION "Added per port per vlan ingress statistics table." REVISION "200502230000Z" DESCRIPTION "Deprecated the cportQosIndexType added the cportQosIndexTypeNew which is read-write. In addition, added the cportQosInProfPolicyPkts and cportQosOutOfProfPolicyPkts objects to the statistic table." REVISION "200405200000Z" DESCRIPTION "Extend per port QoS Statistics table by adding no_change object." REVISION "200401300000Z" DESCRIPTION "Add cos(4) to cportQosIndexType." REVISION "200203200000Z" DESCRIPTION "Add per port QoS Statistics table." REVISION "200105150000Z" DESCRIPTION "Add cportQosRLConfigEnable and cportQosTSConfigEnable and renumber the objects." REVISION "200012200000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 189 } ciscoPortQosMIBObjects OBJECT IDENTIFIER ::= { ciscoPortQosMIB 1 } -- Subgroups: -- Rate-limit(RL) -- Traffic-Shaping(TS) -- Statistics cportQosRLConfig OBJECT IDENTIFIER ::= { ciscoPortQosMIBObjects 1 } cportQosTSConfig OBJECT IDENTIFIER ::= { ciscoPortQosMIBObjects 2 } cportQosStatistics OBJECT IDENTIFIER ::= { ciscoPortQosMIBObjects 3 } cportQosRLConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosRLConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of rate limit configuration entries. Rate Limiting is a method of traffic control. It allows a set of rate limits to be configured and applied to packets flowing into/out of an interface to regulate network traffic." ::= { cportQosRLConfig 1 } cportQosRLConfigEntry OBJECT-TYPE SYNTAX CportQosRLConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of rate-limit configuration objects for a particular interface. Entries in the cportQosRLConfigTable are created and deleted by non-SNMP methods. Creation of these entries is dependent upon configuration of a physical interface. Further, the physical interfaces which are configured for port-qos, can only have these entries. The ifIndex in the INDEX clause identifies the interface number for a physical interface." INDEX { ifIndex, cportQosRLConfigDirection } ::= { cportQosRLConfigTable 1 } CportQosRLConfigEntry ::= SEQUENCE { cportQosRLConfigDirection INTEGER, cportQosRLConfigEnable TruthValue, cportQosRLConfigRate Integer32, cportQosRLConfigBurstSize Integer32 } cportQosRLConfigDirection OBJECT-TYPE SYNTAX INTEGER { input(1), output(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The direction in which the rate-limit is applied to packet: input statistics of the input packets. output statistics of the output packets." ::= { cportQosRLConfigEntry 1 } cportQosRLConfigEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the rate-limit is enabled or disabled. A value of true(1) indicates the rate-limit is enabled and a value of false(2) indicates it's disabled. Writing a value of true(1) to this object also requires writing a valid value to the cportQosRLConfigRate at the same time. Writing to cportQosRLConfigBurstSize is optional." ::= { cportQosRLConfigEntry 2 } cportQosRLConfigRate OBJECT-TYPE SYNTAX Integer32 (32000..2147483647) UNITS "bits per second" MAX-ACCESS read-write STATUS current DESCRIPTION "This is the sustained rate permitted by the rate limit. Writing to this object also requires writing a value of true(1) to cportQosRLConfigEnable at the same time." ::= { cportQosRLConfigEntry 3 } cportQosRLConfigBurstSize OBJECT-TYPE SYNTAX Integer32 (0..64000) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "The burst size. The amount of traffic, in bytes, in excess of the sustained rate which will be instantaneously permitted by the rate limit. Writing to this object also requires writing a value of true(1) to cportQosRLConfigEnable and a valid value to the cportQosRLConfigRate at the same time." ::= { cportQosRLConfigEntry 4 } cportQosTSConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosTSConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of traffic-shaping action configuration entries." ::= { cportQosTSConfig 1 } cportQosTSConfigEntry OBJECT-TYPE SYNTAX CportQosTSConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of traffic shaping action configuration objects for a particular interface. Entries in the cportQosTSConfigTable are created and deleted by non-SNMP methods. Creation of these entries is dependent upon configuration of a physical interface. Further, the physical interfaces which are configured for port-qos, can only have these entries. The ifIndex in the INDEX clause identifies the interface number for a physical interface." INDEX { ifIndex } ::= { cportQosTSConfigTable 1 } CportQosTSConfigEntry ::= SEQUENCE { cportQosTSConfigEnable TruthValue, cportQosTSConfigRate Integer32, cportQosTSConfigBurstSize Integer32 } cportQosTSConfigEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the traffic shaping is enabled or disabled. A value of true(1) indicates the traffic shaping is enabled and a value of false(2) indicates it's disabled. Writing a value of true(1) to this object also requires writing a valid value to the cportQosTSConfigRate at the same time. Writing to cportQosTSConfigBurstSize is optional." ::= { cportQosTSConfigEntry 1 } cportQosTSConfigRate OBJECT-TYPE SYNTAX Integer32 (32000..2147483647) UNITS "bits per second" MAX-ACCESS read-write STATUS current DESCRIPTION "This is the sustained rate permitted by the traffic shaping. Writing to this object also requires writing a value of true(1) to cportQosTSConfigEnable at the same time." ::= { cportQosTSConfigEntry 2 } cportQosTSConfigBurstSize OBJECT-TYPE SYNTAX Integer32 (0..512000) UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of traffic, in bits, in excess of the sustained traffic shaping rate that will be instantaneously permitted by this feature. Writing to this object also requires writing a value of true(1) to cportQosTSConfigEnable and a valid value to the cportQosTSConfigRate at the same time." ::= { cportQosTSConfigEntry 3 } -- Statistics information cportQosIndexType OBJECT-TYPE SYNTAX INTEGER { none(1), dscp(2), ipPrecedence(3), cos(4) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the sorting mechanism used to collect and store the statistical QoS information. This object value is device dependent and it could be optionally configured via command-line. This object has been deprecated in order to make the selection of sorting mechanism selectable from the MIB. The replacement object is cportQosIndexTypeNew." ::= { cportQosStatistics 1 } cportQosStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies QoS port related Statistical information." ::= { cportQosStatistics 2 } cportQosStatsEntry OBJECT-TYPE SYNTAX CportQosStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the QoS port statistical information which are : pre/post policy pkts/octets counts, drop pkts/octets, classified pkts/octets." INDEX { ifIndex, cportQosDirection, cportQosIndex } ::= { cportQosStatsTable 1 } CportQosStatsEntry ::= SEQUENCE { cportQosDirection INTEGER, cportQosIndex Unsigned32, cportQosPrePolicyPkts Counter64, cportQosPrePolicyOctets Counter64, cportQosPostPolicyPkts Counter64, cportQosPostPolicyOctets Counter64, cportQosDropPkts Counter64, cportQosDropOctets Counter64, cportQosClassifiedOctets Counter64, cportQosClassifiedPkts Counter64, cportQosNoChangePkts Counter64, cportQosNoChangeOctets Counter64, cportQosInProfPolicyPkts Counter64, cportQosOutOfProfPolicyPkts Counter64, cportQosInProfPolicyOctets Counter64, cportQosOutOfProfPolicyOctets Counter64, cportQosViolateProfPolicyPkts Counter64, cportQosViolateProfPolicyOctets Counter64 } cportQosDirection OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The direction of the reported statistics: -'ingress' statistics for the input direction. -'egress' statistics for the output direction." ::= { cportQosStatsEntry 1 } cportQosIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer to identify this entry. cportQosIndex value, which may have non-contiguous range, is linked to cportQosIndexType: -if cportQosIndexTypeNew equals 'none', cportQosIndex is constant with the value of 1 and all statistics are classified per port -if cportQosIndexTypeNew equals 'DSCP', cportQosIndex range is from 1 to 65 and all statistics are classified per port and DSCP value. The range of DSCP values reported is shifted up one meaning a cportQosIndex of 1 translates to a packet DSCP value of 0. Value of 65 is an arbitrary number used to report aggregate counts of packets which were not displayed in the 1 to 64 range. This usually happens when the range value of cportQosIndex is non-contiguous -if cportQosIndexTypeNew equals 'ipPrecedence', cportQosIndex range is from 1 to 8 and all statistics are classified per port and IP precedence value. The range of IP precedence values reported is shifted up one meaning a cportQosIndex of 1 translates to an IP precedence value of 0 -if cportQosIndexTypeNew equals 'cos', cportQosIndex range is from 1 to 8 and all statistics are classified per interface and L2 COS value. The range of COS values reported is shifted up one meaning a cportQosIndex of 1 translates to a COS value of 0 -if cportQosIndexTypeNew equals 'police', cportQosIndex range is from 1 to 65 and all statistics are classified per interface and police index. The police indexes are arbitrary numbers that do not correlate to policers names or identifiers." ::= { cportQosStatsEntry 2 } cportQosPrePolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets prior to executing any QoS policies." ::= { cportQosStatsEntry 3 } cportQosPrePolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets prior to executing any QoS policies." ::= { cportQosStatsEntry 4 } cportQosPostPolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets after executing QoS policies." ::= { cportQosStatsEntry 5 } cportQosPostPolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets after executing QoS policies." ::= { cportQosStatsEntry 6 } cportQosDropPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of dropped packets as the result of queuing and scheduling related QoS features that can produce drops." ::= { cportQosStatsEntry 7 } cportQosDropOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of dropped octets as the result of queuing and scheduling related QoS features that can produce drops." ::= { cportQosStatsEntry 8 } cportQosClassifiedOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of classified octets during QoS." ::= { cportQosStatsEntry 9 } cportQosClassifiedPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of classified packets during QoS." ::= { cportQosStatsEntry 10 } cportQosNoChangePkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets maintain unchange after executing QoS policies." ::= { cportQosStatsEntry 11 } cportQosNoChangeOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets maintain unchange after executing QoS policies." ::= { cportQosStatsEntry 12 } cportQosInProfPolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets that are within the policer profile limit configured for this policy." ::= { cportQosStatsEntry 13 } cportQosOutOfProfPolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets that exceed the policer profile limit configured for this policy." ::= { cportQosStatsEntry 14 } cportQosInProfPolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets that are within the policer profile limit configured for this policy." ::= { cportQosStatsEntry 15 } cportQosOutOfProfPolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets that exceed the policer profile limit configured for this policy." ::= { cportQosStatsEntry 16 } cportQosViolateProfPolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets that violate the policer profile limit configured for this policy." ::= { cportQosStatsEntry 17 } cportQosViolateProfPolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets that violate the policer profile limit configured for this policy." ::= { cportQosStatsEntry 18 } cportQosIndexTypeNew OBJECT-TYPE SYNTAX INTEGER { none(1), dscp(2), ipPrecedence(3), cos(4), police(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the sorting mechanism used to collect and store the statistical QoS information. This object value is device dependent." ::= { cportQosStatistics 3 } cportQosInVlanStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosInVlanStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies QoS port related ingress statistical information. The type of information is controlled by the cportQosIndexTypeNew object." ::= { cportQosStatistics 4 } cportQosInVlanStatsEntry OBJECT-TYPE SYNTAX CportQosInVlanStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "It exists an entry in this table for each port on which QoS is configured per port and per VLAN." INDEX { ifIndex, vtpVlanIndex, cportQosIndex } ::= { cportQosInVlanStatsTable 1 } CportQosInVlanStatsEntry ::= SEQUENCE { cportQosVlanInProfPolicyPkts Counter64, cportQosVlanOutOfProfPolicyPkts Counter64, cportQosVlanInProfPolicyOctets Counter64, cportQosVlanOutOfProfPolicyOctets Counter64, cportQosVlanViolateProfPolicyPkts Counter64, cportQosVlanViolateProfPolicyOctets Counter64 } cportQosVlanInProfPolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets that are within the policer profile limit configured for this policy." ::= { cportQosInVlanStatsEntry 1 } cportQosVlanOutOfProfPolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets that exceeds the policer profile limit configured for this policy." ::= { cportQosInVlanStatsEntry 2 } cportQosVlanInProfPolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets that are within the policer profile limit configured for this policy." ::= { cportQosInVlanStatsEntry 3 } cportQosVlanOutOfProfPolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets that exceed the policer profile limit configured for this policy." ::= { cportQosInVlanStatsEntry 4 } cportQosVlanViolateProfPolicyPkts OBJECT-TYPE SYNTAX Counter64 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of packets that violate the policer profile limit configured for this policy." ::= { cportQosInVlanStatsEntry 5 } cportQosVlanViolateProfPolicyOctets OBJECT-TYPE SYNTAX Counter64 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The count of octets that violate the policer profile limit configured for this policy." ::= { cportQosInVlanStatsEntry 6 } cportQosEgressQueueStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosEgressQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies QoS related statistical information for egress queues on each port. The agent will add an entry in this table for each queue, threshold and port." ::= { cportQosStatistics 5 } cportQosEgressQueueStatsEntry OBJECT-TYPE SYNTAX CportQosEgressQueueStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cportQosEgressQueueStatsTable." INDEX { ifIndex, cportQosQueueId, cportQosQueueThreshold } ::= { cportQosEgressQueueStatsTable 1 } CportQosEgressQueueStatsEntry ::= SEQUENCE { cportQosQueueId Unsigned32, cportQosQueueThreshold Unsigned32, cportQosQueueEnqueuePkts Counter64, cportQosQueueDropPkts Counter64 } cportQosQueueId OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the queue ID of this port for which QoS statistics are collected. For example, if a port has 4 queues, this index value can be 1,2,3,4." ::= { cportQosEgressQueueStatsEntry 1 } cportQosQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the threshold number of the queue threshold associated with this queue. A queue can have more than one threshold. For example, if a queue has 3 thresholds, this index could be 1,2,3." ::= { cportQosEgressQueueStatsEntry 2 } cportQosQueueEnqueuePkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress packets that have been enqueued for this queue and threshold." ::= { cportQosEgressQueueStatsEntry 3 } cportQosQueueDropPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress packets that have been dropped for this queue and threshold." ::= { cportQosEgressQueueStatsEntry 4 } cportQosClassEgressStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosClassEgressStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies egress QoS related statistical information for classes associated with an egress QoS policy. Each queue on a port is uniquely mapped to a class in an egress QoS policy. This table provides the statistical information for each class-queue on each port. The agent will add an entry in this table for each queue and threshold on a port associated with a class." ::= { cportQosStatistics 6 } cportQosClassEgressStatsEntry OBJECT-TYPE SYNTAX CportQosClassEgressStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cportQosClassEgressStatsTable." INDEX { ifIndex, cportQosClassId, cportQosClassThreshold } ::= { cportQosClassEgressStatsTable 1 } CportQosClassEgressStatsEntry ::= SEQUENCE { cportQosClassId Unsigned32, cportQosClassThreshold Unsigned32, cportQosClassName SnmpAdminString, cportQosClassEnqueuePkts Counter64, cportQosClassDropPkts Counter64, cportQosClassDiscontinuityTime TimeStamp } cportQosClassId OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the class-ID of the class in an egress policy for which QoS statistics are being collected. Each queue on a port is uniquely mapped to a class in an egress policy. Each class in a policy is uniquely identified by a class-ID. A value of 0 indicates the default queue/class-default." ::= { cportQosClassEgressStatsEntry 1 } cportQosClassThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) UNITS "Number of buffers" MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the tail-drop queue thresholds value on a class-queue on a port. These values can either be the default value or each could be an explicitly configured value. For example, if a queue has 3 thresholds, 16, 64 and 256, this index value for each threshold would be 16, 64, 256 respectively." ::= { cportQosClassEgressStatsEntry 2 } cportQosClassName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the class name that is associated with the class-ID indicated by the cportQosClassId object." ::= { cportQosClassEgressStatsEntry 3 } cportQosClassEnqueuePkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress packets that have been enqueued for this queue and threshold." ::= { cportQosClassEgressStatsEntry 4 } cportQosClassDropPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress packets that have been dropped for this queue and threshold." ::= { cportQosClassEgressStatsEntry 5 } cportQosClassDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any of this entry's counter experienced a discontinuity. If discontinuities have not occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { cportQosClassEgressStatsEntry 6 } cportQosClassIngressStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosClassIngressStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies QoS related statistical information per port for ingress traffic belonging to QoS classes configured with an action that support statistics (for example: a policer)." ::= { cportQosStatistics 7 } cportQosClassIngressStatsEntry OBJECT-TYPE SYNTAX CportQosClassIngressStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cportQosClassIngressStatsTable. An entry is added per port for ingress traffic belonging to QoS classes, indicated by cportQosClassIdLevel1 and cportQosClassIdLevel2, configured with an action that supports statistics." INDEX { ifIndex, cportQosClassIdLevel1, cportQosClassIdLevel2 } ::= { cportQosClassIngressStatsTable 1 } CportQosClassIngressStatsEntry ::= SEQUENCE { cportQosClassIdLevel1 Unsigned32, cportQosClassIdLevel2 Unsigned32, cportQosClassNameLevel1 SnmpAdminString, cportQosClassNameLevel2 SnmpAdminString, cportQosPoliceConformPkts Counter64, cportQosPoliceConformOctets Counter64, cportQosPoliceExceedPkts Counter64, cportQosPoliceExceedOctets Counter64, cportQosPoliceViolatePkts Counter64, cportQosPoliceViolateOctets Counter64, cportQosPoliceConformRate Gauge32, cportQosPoliceExceedRate Gauge32, cportQosPoliceViolateRate Gauge32, cportQosPoliceDiscontinuityTime TimeStamp } cportQosClassIdLevel1 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the class-ID of a class at the first (highest) level of a hierarchical policy. A value of 0 indicates class default. For a non-hierarchical policy, the value of this object is always 0." ::= { cportQosClassIngressStatsEntry 1 } cportQosClassIdLevel2 OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the class-ID of a class at the second level of a hierarchical policy, or at the first (only) level in a non-hierarchical policy. For a two level policy, this object identifies the class-ID at the second level of the policy. For a non-hierarchical/ single level policy this object identifies the class-ID of a class at the first (only) level of the policy. A value of 0 indicates class default." ::= { cportQosClassIngressStatsEntry 2 } cportQosClassNameLevel1 OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the class name that is associated with the class-ID indicated by the cportQosClassIdLevel1 object." ::= { cportQosClassIngressStatsEntry 3 } cportQosClassNameLevel2 OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the class name that is associated with the class-ID indicated by the cportQosClassIdLevel2 object." ::= { cportQosClassIngressStatsEntry 4 } cportQosPoliceConformPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress packets that conforms to the policing rate for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 5 } cportQosPoliceConformOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress octets that conforms to the policing rate for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 6 } cportQosPoliceExceedPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress packets that exceeds the policing rate for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 7 } cportQosPoliceExceedOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress octets that exceeds the policing rate for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 8 } cportQosPoliceViolatePkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress packets that violates the policing rate for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 9 } cportQosPoliceViolateOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress octets that violates the policing rate for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 10 } cportQosPoliceConformRate OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of ingress packets that conforms to the policing rate for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 11 } cportQosPoliceExceedRate OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of ingress packets that exceeds the policing for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 12 } cportQosPoliceViolateRate OBJECT-TYPE SYNTAX Gauge32 UNITS "bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the rate of ingress packets that violates the policing for traffic belonging to the classes indicated by the cportQosClassIdLevel1 and cportQosClassIdLevel2 indices." ::= { cportQosClassIngressStatsEntry 13 } cportQosPoliceDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any of this entry's counter experienced a discontinuity. If discontinuities have not occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { cportQosClassIngressStatsEntry 14 } cportQosDscpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosDscpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates QoS related statistical DSCP information. The statistics are collected per physical port and DSCP value." ::= { cportQosStatistics 8 } cportQosDscpStatsEntry OBJECT-TYPE SYNTAX CportQosDscpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cportQosDscpStatsTable. There is an entry in this table for each port and each DSCP value." INDEX { ifIndex, cportQosDscpValue } ::= { cportQosDscpStatsTable 1 } CportQosDscpStatsEntry ::= SEQUENCE { cportQosDscpValue Dscp, cportQosDscpIngressPkts Counter64, cportQosDscpIngressOctets Counter64, cportQosDscpEgressPkts Counter64, cportQosDscpEgressOctets Counter64 } cportQosDscpValue OBJECT-TYPE SYNTAX Dscp MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the DSCP value for incoming or outgoing packets." ::= { cportQosDscpStatsEntry 1 } cportQosDscpIngressPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress packets whose DSCP value matched the value of the cportQosDscpValue object." ::= { cportQosDscpStatsEntry 2 } cportQosDscpIngressOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress octets whose DSCP value matched the value of the cportQosDscpValue object." ::= { cportQosDscpStatsEntry 3 } cportQosDscpEgressPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress packets whose DSCP value matched the value of the cportQosDscpValue object." ::= { cportQosDscpStatsEntry 4 } cportQosDscpEgressOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress octets whose DSCP value matched the value of the cportQosDscpValue object." ::= { cportQosDscpStatsEntry 5 } cportQosCosStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CportQosCosStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table indicates QoS related statistical COS information. The statistics are collected per physical port and COS value." ::= { cportQosStatistics 9 } cportQosCosStatsEntry OBJECT-TYPE SYNTAX CportQosCosStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in cportQosCosStatsTable. There is an entry in this table for each port and each COS value." INDEX { ifIndex, cportQosCosValue } ::= { cportQosCosStatsTable 1 } CportQosCosStatsEntry ::= SEQUENCE { cportQosCosValue QosLayer2Cos, cportQosCosIngressPkts Counter64, cportQosCosIngressOctets Counter64, cportQosCosEgressPkts Counter64, cportQosCosEgressOctets Counter64 } cportQosCosValue OBJECT-TYPE SYNTAX QosLayer2Cos MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the COS value for each received or sent packet." ::= { cportQosCosStatsEntry 1 } cportQosCosIngressPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress packets whose COS value matched the value of the cportQosCosValue object." ::= { cportQosCosStatsEntry 2 } cportQosCosIngressOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ingress octets whose COS value matched the value of the cportQosCosValue object." ::= { cportQosCosStatsEntry 3 } cportQosCosEgressPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress packets whose COS value matched the value of the cportQosCosValue object." ::= { cportQosCosStatsEntry 4 } cportQosCosEgressOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of egress octets whose COS value matched the value of the cportQosCosValue object." ::= { cportQosCosStatsEntry 5 } -- Notifications ciscoPortQosMIBNotifications OBJECT IDENTIFIER ::= { ciscoPortQosMIB 2 } -- (no notifications are currently defined) -- -- conformance information ciscoPortQosMIBConformance OBJECT IDENTIFIER ::= { ciscoPortQosMIB 3 } ciscoPortQosMIBCompliances OBJECT IDENTIFIER ::= { ciscoPortQosMIBConformance 1 } ciscoPortQosMIBGroups OBJECT IDENTIFIER ::= { ciscoPortQosMIBConformance 2 } -- compliance statement ciscoPortQosMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement Port QoS functions on a Cisco router." MODULE -- this module MANDATORY-GROUPS { ciscoPortQosMIBGroup } GROUP ciscoPortQosStatsMIBGroup DESCRIPTION "Implementation of this group is optional based on the device capabilities. Replaced by: ciscoPortQosMIBComplianceRev1" ::= { ciscoPortQosMIBCompliances 1 } ciscoPortQosMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement Port QoS functions on a Cisco router." MODULE -- this module MANDATORY-GROUPS { ciscoPortQosMIBGroup } GROUP ciscoPortQosStatsMIBGroupRev1 DESCRIPTION "Implementation of this group is optional based on the device capabilities." ::= { ciscoPortQosMIBCompliances 2 } ciscoPortQosMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement Port QoS functions on a Cisco router." MODULE -- this module MANDATORY-GROUPS { ciscoPortQosMIBGroup } GROUP ciscoPortQosStatsMIBGroupRev2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." OBJECT cportQosIndexTypeNew MIN-ACCESS read-only DESCRIPTION "Read-only access for devices that do not support configuration of the sorting mechanism." ::= { ciscoPortQosMIBCompliances 3 } ciscoPortQosMIBComplianceRev3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement Port QoS functions on a Cisco router." MODULE -- this module MANDATORY-GROUPS { ciscoPortQosMIBGroup } GROUP ciscoPortQosStatsMIBGroupRev2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp1 DESCRIPTION "Implementation of this group is optional based on the device capabilities." OBJECT cportQosIndexTypeNew MIN-ACCESS read-only DESCRIPTION "Read-only access for devices that do not support configuration of the sorting mechanism." ::= { ciscoPortQosMIBCompliances 4 } ciscoPortQosMIBComplianceRev4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement Port QoS functions on a Cisco router." MODULE -- this module MANDATORY-GROUPS { ciscoPortQosMIBGroup } GROUP ciscoPortQosStatsMIBGroupRev2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp1 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." OBJECT cportQosIndexTypeNew MIN-ACCESS read-only DESCRIPTION "Read-only access for devices that do not support configuration of the sorting mechanism." ::= { ciscoPortQosMIBCompliances 5 } ciscoPortQosMIBComplianceRev5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement Port QoS functions on a Cisco router." MODULE -- this module MANDATORY-GROUPS { ciscoPortQosMIBGroup } GROUP ciscoPortQosStatsMIBGroupRev2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp1 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp3 DESCRIPTION "Implementation of this group is optional based on the device capabilities." OBJECT cportQosIndexTypeNew MIN-ACCESS read-only DESCRIPTION "Read-only access for devices that do not support configuration of the sorting mechanism." ::= { ciscoPortQosMIBCompliances 6 } ciscoPortQosMIBComplianceRev6 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement Port QoS functions on a Cisco router." MODULE -- this module MANDATORY-GROUPS { ciscoPortQosMIBGroup } GROUP ciscoPortQosStatsMIBGroupRev2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp1 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp2 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp3 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp4 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp5 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp6 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp7 DESCRIPTION "Implementation of this group is optional based on the device capabilities." GROUP ciscoPortQosStatsMIBGroupRev2Supp8 DESCRIPTION "Implementation of this group is optional based on the device capabilities." OBJECT cportQosIndexTypeNew MIN-ACCESS read-only DESCRIPTION "Read-only access for devices that do not support configuration of the sorting mechanism." ::= { ciscoPortQosMIBCompliances 7 } -- units of conformance ciscoPortQosMIBGroup OBJECT-GROUP OBJECTS { cportQosRLConfigEnable, cportQosRLConfigRate, cportQosRLConfigBurstSize, cportQosTSConfigEnable, cportQosTSConfigRate, cportQosTSConfigBurstSize } STATUS current DESCRIPTION "A collection of objects providing Port QoS features." ::= { ciscoPortQosMIBGroups 1 } ciscoPortQosStatsMIBGroup OBJECT-GROUP OBJECTS { cportQosIndexType, cportQosPrePolicyPkts, cportQosPrePolicyOctets, cportQosPostPolicyOctets, cportQosPostPolicyPkts, cportQosDropPkts, cportQosDropOctets, cportQosClassifiedOctets, cportQosClassifiedPkts } STATUS deprecated DESCRIPTION "A collection of objects providing per Port QoS statistics. Replaced by: ciscoPortQosStatsMIBGroupRev1" ::= { ciscoPortQosMIBGroups 2 } ciscoPortQosStatsMIBGroupRev1 OBJECT-GROUP OBJECTS { cportQosIndexType, cportQosPrePolicyPkts, cportQosPrePolicyOctets, cportQosPostPolicyOctets, cportQosPostPolicyPkts, cportQosDropPkts, cportQosDropOctets, cportQosClassifiedOctets, cportQosClassifiedPkts, cportQosNoChangePkts, cportQosNoChangeOctets } STATUS deprecated DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 3 } ciscoPortQosStatsMIBGroupRev2 OBJECT-GROUP OBJECTS { cportQosIndexTypeNew, cportQosPrePolicyPkts, cportQosPrePolicyOctets, cportQosPostPolicyOctets, cportQosPostPolicyPkts, cportQosDropPkts, cportQosDropOctets, cportQosClassifiedOctets, cportQosClassifiedPkts, cportQosNoChangePkts, cportQosNoChangeOctets, cportQosInProfPolicyPkts, cportQosOutOfProfPolicyPkts } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 4 } ciscoPortQosStatsMIBGroupRev2Supp1 OBJECT-GROUP OBJECTS { cportQosVlanInProfPolicyPkts, cportQosVlanOutOfProfPolicyPkts } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 5 } ciscoPortQosStatsMIBGroupRev2Supp2 OBJECT-GROUP OBJECTS { cportQosInProfPolicyOctets, cportQosOutOfProfPolicyOctets, cportQosViolateProfPolicyPkts, cportQosViolateProfPolicyOctets } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 6 } ciscoPortQosStatsMIBGroupRev2Supp3 OBJECT-GROUP OBJECTS { cportQosVlanInProfPolicyOctets, cportQosVlanOutOfProfPolicyOctets, cportQosVlanViolateProfPolicyPkts, cportQosVlanViolateProfPolicyOctets } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 7 } ciscoPortQosStatsMIBGroupRev2Supp4 OBJECT-GROUP OBJECTS { cportQosQueueEnqueuePkts, cportQosQueueDropPkts } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 8 } ciscoPortQosStatsMIBGroupRev2Supp5 OBJECT-GROUP OBJECTS { cportQosClassName, cportQosClassEnqueuePkts, cportQosClassDropPkts, cportQosClassDiscontinuityTime } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 9 } ciscoPortQosStatsMIBGroupRev2Supp6 OBJECT-GROUP OBJECTS { cportQosClassNameLevel1, cportQosClassNameLevel2, cportQosPoliceConformPkts, cportQosPoliceConformOctets, cportQosPoliceExceedPkts, cportQosPoliceExceedOctets, cportQosPoliceViolatePkts, cportQosPoliceViolateOctets, cportQosPoliceConformRate, cportQosPoliceExceedRate, cportQosPoliceViolateRate, cportQosPoliceDiscontinuityTime } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 10 } ciscoPortQosStatsMIBGroupRev2Supp7 OBJECT-GROUP OBJECTS { cportQosDscpIngressPkts, cportQosDscpIngressOctets, cportQosDscpEgressPkts, cportQosDscpEgressOctets } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 11 } ciscoPortQosStatsMIBGroupRev2Supp8 OBJECT-GROUP OBJECTS { cportQosCosIngressPkts, cportQosCosIngressOctets, cportQosCosEgressPkts, cportQosCosEgressOctets } STATUS current DESCRIPTION "A collection of objects providing per Port QoS statistics." ::= { ciscoPortQosMIBGroups 12 } END