-- *****************************************************************
-- CISCO-MGX82XX-ENVMON-MIB - Environmental monitoring MIB in MGX82xx.
--
-- April 2003, Subra.Hegde
--
-- Copyright (c) 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-MGX82XX-ENVMON-MIB DEFINITIONS ::= BEGIN
IMPORTS

    MODULE-IDENTITY,
    OBJECT-TYPE,
    Integer32
                               FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP               FROM SNMPv2-CONF
    basisAsm                   FROM BASIS-MIB
    ciscoWan                   FROM CISCOWAN-SMI;

ciscoMgx82xxEnvmonMIB MODULE-IDENTITY
        LAST-UPDATED    "200304170000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
    DESCRIPTION
        "The MIB module to describe the status of the 
        Environmental Monitoring devices in
        MGX82xx products."

    REVISION    "200304170000Z"
    DESCRIPTION
        "Initial version of the MIB.

        The content of this MIB was originally available
        in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
        The applicable objects from CISCO-WAN-AXIPOP-MIB
        are defined using SMIv2 in this MIB. Also the
        descriptions of some of the objects have been 
        modified."
    ::= { ciscoWan 70 }


-- ****************************************************************
--  Environmental alarm tables
-- 
-- ****************************************************************

asmAlarmTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF AsmAlarmEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
        "The ASM Alarm table. The table size is
        given by the value of ASMNumOfValidEntries."
    ::= { basisAsm 1 }

asmAlarmEntry OBJECT-TYPE
    SYNTAX	AsmAlarmEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
        "An entry in the Basis ASM Alarm Table."
    INDEX	{ asmAlarmNum }
    ::= { asmAlarmTable 1 }

AsmAlarmEntry ::=
    SEQUENCE {
        asmAlarmNum             Integer32,
        asmAlarmType            INTEGER,
        asmAlarmUnitNum         Integer32,
        asmAlarmThreshold       Integer32,
        asmAlarmSeverity        INTEGER,
        asmUnitMeasurable       INTEGER,
        asmUnitMeasuredValue    Integer32,
        asmPhysicalAlarmState   Integer32,
        asmClrButton            INTEGER
         		}
asmAlarmNum OBJECT-TYPE
    SYNTAX	Integer32(1..100)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
        "This object is the identifier of a ASM alarm
        entry. The Alarm is further identified by the 
        objects ASMAlarmType & ASMAlarmUnitNum."
    ::= { asmAlarmEntry 1 }

asmAlarmType OBJECT-TYPE
    SYNTAX INTEGER {
               alarmOther       (1),
               alarmTemperature (2),
               alarmPSU         (3),
               alarmDCLevel     (4),
               alarmFanUnit     (5)
           }
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
        "The value for this object indicates the type
        of device for which alarm is applicable.

        The possible values are :

         alarmOther      (1) : Other than specified below
         alarmTemperature(2) : Temperature sensor
         alarmPSU        (3) : Power Supply Unit
         alarmDCLevel    (4) : DC Level Sensor
         alarmFanUnit    (5) : FAN speed sensor."
    ::= { asmAlarmEntry 2 }

asmAlarmUnitNum OBJECT-TYPE
    SYNTAX      Integer32 (1..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object identifies one unit among a number of
        identical units represented in this table having the
        same asmAlarmType."
    ::= { asmAlarmEntry 3 }

asmAlarmThreshold OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object specifies the threshold beyond which
        the alarmable unit is said to be in an abnormal state."
    ::= { asmAlarmEntry 4 }

asmAlarmSeverity OBJECT-TYPE
    SYNTAX  INTEGER{
                alarmMinor (1),
                alarmMajor (2)
            }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This variable specifies the severity of the alarm
        to be declared when the asmAlarmThreshold specified is
        exceeded."
    ::= { asmAlarmEntry 5 }

asmUnitMeasurable OBJECT-TYPE
    SYNTAX  INTEGER{
                no  (1),
                yes (2)
            }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicates if the alarm unit is measurable
        by the switch/system."
    ::= { asmAlarmEntry 6 }

asmUnitMeasuredValue OBJECT-TYPE
    SYNTAX     Integer32(0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object gives the measured value of the entity
        addressed by asmAlarmNum. The value in this object
        is valid only if asmUnitMeasurable is set to 'yes'.
        This object contains value zero for asmUnitMeasurable
        value of 'no'."
    ::= { asmAlarmEntry 7 }

asmPhysicalAlarmState OBJECT-TYPE
    SYNTAX     Integer32(0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object indicates the status of the ASM alarm
        represented in this entry. It is a bitmap where a
        set bit indicates an abnormal condition. A reset bit
        signifies normal operation."
    ::= { asmAlarmEntry 8 }

asmClrButton OBJECT-TYPE
    SYNTAX  INTEGER{
                asmAlarmNoAction(1),
                asmAlarmClear(2)
            }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This object when set to asmAlarmClear(2),causes the
        alarm to be cleared."
    ::= { asmAlarmEntry 9 }

asmNumOfValidEntries OBJECT-TYPE
    SYNTAX	Integer32(0..100)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
        "The number of valid asmAlarmTable entries (regardless
        of how many are actually configured) in the table."
    ::= { basisAsm 2 }

asmShelfAlarmState OBJECT-TYPE
    SYNTAX	INTEGER{
                    alarmOff(1),
                    alarmOn(2)
                }
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
        "This object indicates whether any Shelf/Node Alarm has been 
        declared in the system."
    ::= { basisAsm 3 }

-- conformance information

cmEnvmonMIBConformance  OBJECT IDENTIFIER ::= 
                           { ciscoMgx82xxEnvmonMIB 2 }

cmEnvmonMIBGroups       OBJECT IDENTIFIER ::= 
                                   { cmEnvmonMIBConformance 1 }

cmEnvmonMIBCompliances  OBJECT IDENTIFIER ::= 
                                   { cmEnvmonMIBConformance 2 }

-- compliance statements

cmEnvmonCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for objects related
        to MGX82xx Environmental monitoring MIB."
    MODULE  -- this module
    MANDATORY-GROUPS {
        cmEnvmonInfoGroup,
        cmEnvmonGeneralGroup
    }
    ::= { cmEnvmonMIBCompliances 1 }

cmEnvmonInfoGroup OBJECT-GROUP
    OBJECTS {
        asmAlarmNum,
        asmAlarmType,
        asmAlarmUnitNum,
        asmAlarmThreshold,
        asmAlarmSeverity,
        asmUnitMeasurable,
        asmUnitMeasuredValue,
        asmPhysicalAlarmState,
        asmClrButton
      }
      STATUS current
      DESCRIPTION
          "The collection of objects which are used for
          providing information on environmental monitoring
          devices."
      ::= { cmEnvmonMIBGroups 1 }

cmEnvmonGeneralGroup OBJECT-GROUP
    OBJECTS {
        asmNumOfValidEntries,
        asmShelfAlarmState
      }
      STATUS current
      DESCRIPTION
          "The collection of objects which are used for
          providing information on shelf level objects
          related to environmental monitoring devices."
      ::= { cmEnvmonMIBGroups 2 }

END