-- ***************************************************************** -- CISCO-IETF-VPLS-LDP-MIB.my -- -- November 2006, Mark Tooker -- -- Copyright (c) 2006-2009 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-IETF-VPLS-LDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TruthValue FROM SNMPv2-TC VPNId FROM VPN-TC-STD-MIB cvplsConfigIndex, cvplsPwBindIndex FROM CISCO-IETF-VPLS-GENERIC-MIB ciscoExperiment FROM CISCO-SMI; cvplsLdpMIB MODULE-IDENTITY LAST-UPDATED "200711221200Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-l2vpn@cisco.com" DESCRIPTION "This MIB module contains managed object definitions for LDP signalled Virtual Private LAN Services as in [L2VPN-VPLS-LDP] This MIB module enables the use of any underlying Pseudo Wire network. This MIB is based on the following IETF document. http://www1.tools.ietf.org/html/draft-nadeau-l2vpn-vpls-mib-03" REVISION "200711221200Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoExperiment 141 } -- Top-level components of this MIB. -- -- Tables, Scalars cvplsLdpObjects OBJECT IDENTIFIER ::= { cvplsLdpMIB 1 } -- Conformance cvplsLdpConformance OBJECT IDENTIFIER ::= { cvplsLdpMIB 2 } cvplsLdpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CvplsLdpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring LDP specific parameters for Virtual Private Lan Services(VPLS)." ::= { cvplsLdpObjects 1 } cvplsLdpConfigEntry OBJECT-TYPE SYNTAX CvplsLdpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents LDP specific information for Virtual Private Lan Service(VPLS) in a packet network. It is indexed by cvplsConfigIndex, which uniquely identifies a single VPLS. A row is automatically created when a VPLS service is configured using LDP signalling. None of the read-create objects values can be changed when cvplsRowStatus is in the active(1) state. Changes are allowed when the cvplsRowStatus is in notInService(2) or notReady(3) states only. If the operator need to change one of the values for an active row the cvplsConfigRowStatus should be first changed to notInService(2), the objects may be changed now, and later to active(1) in order to re-initiate the signaling process with the new values in effect." INDEX { cvplsConfigIndex } ::= { cvplsLdpConfigTable 1 } CvplsLdpConfigEntry ::= SEQUENCE { cvplsLdpConfigMacAddrWithdraw TruthValue } cvplsLdpConfigMacAddrWithdraw OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if MAC address withdrawl is enabled in this service. If this object is true then Mac address withdrawl Learning is enabled. If false, then Mac Learning is disabled." DEFVAL { true } ::= { cvplsLdpConfigEntry 1 } -- VPLS LDP PW Binding Table cvplsLdpPwBindTable OBJECT-TYPE SYNTAX SEQUENCE OF CvplsLdpPwBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides LDP specific information for an association between a VPLS service and the corresponding Pseudo Wires. A service can have more than one Pseudo Wire association. Pseudo Wires are defined in the cpwTable." ::= { cvplsLdpObjects 2 } cvplsLdpPwBindEntry OBJECT-TYPE SYNTAX CvplsLdpPwBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents an association between a VPLS instance and one or more Pseudo Wires defined in the cpwTable. Each index is unique in describing an entry in this table. However both indexes are required to define the one to many association of service to pseudowire. An entry in this table is instantiated only when LDP signalling is used to configure VPLS service. Each entry in this table provides LDP specific information for the VPlS represented by cvplsConfigIndex." INDEX { cvplsConfigIndex, cvplsPwBindIndex } ::= { cvplsLdpPwBindTable 1 } CvplsLdpPwBindEntry ::= SEQUENCE { cvplsLdpPwBindMacAddressLimit Unsigned32 } cvplsLdpPwBindMacAddressLimit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object specifies the maximum number of learned and static entries allowed in the Forwarding database for this PW Binding. The value 0 means there is no limit for this PW Binding." DEFVAL { 0 } ::= { cvplsLdpPwBindEntry 1 } -- Compliance requirement for read-only implementations. cvplsLdpCompliances OBJECT IDENTIFIER ::= { cvplsLdpConformance 1 } cvplsLdpModuleFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance requirement for implementations that provide full support for CISCO-IETF-VPLS-LDP-MIB. Such devices can then be monitored and configured using this MIB module." MODULE -- this module MANDATORY-GROUPS { cvplsLdpGroup } ::= { cvplsLdpCompliances 1 } cvplsLdpModuleReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance requirement for implementations that only provide read-only support for CISCO-IETF-VPLS-LDP-MIB. Such devices can then be monitored but cannot be configured using this MIB modules." MODULE -- this module MANDATORY-GROUPS { cvplsLdpGroup } OBJECT cvplsLdpConfigMacAddrWithdraw MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvplsLdpPwBindMacAddressLimit MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { cvplsLdpCompliances 2 } -- Units of conformance. cvplsLdpGroups OBJECT IDENTIFIER ::= { cvplsLdpConformance 2 } cvplsLdpGroup OBJECT-GROUP OBJECTS { cvplsLdpConfigMacAddrWithdraw, cvplsLdpPwBindMacAddressLimit } STATUS current DESCRIPTION "The group of objects supporting management of L2VPN VPLS services using LDP." ::= { cvplsLdpGroups 1 } END