-- ***************************************************************** -- CISCO-IETF-PW-FR-MIB.my: Pseudo Wire Frame Relay MIB file -- -- December 2003, Danny Lee, -- George Wilkie -- -- Copyright (c) 2003-2004 by Cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-IETF-PW-FR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI ciscoExperiment FROM CISCO-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, StorageType, RowStatus FROM SNMPv2-TC CpwVcIndexType FROM CISCO-IETF-PW-TC-MIB InterfaceIndexOrZero FROM IF-MIB DlciNumber FROM CISCO-FRAME-RELAY-MIB; cpwVcFrMIB MODULE-IDENTITY LAST-UPDATED "200312160000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 SA Tel: +1 800 553-NETS Email: cs-framerelay@cisco.com" DESCRIPTION "Cisco Pseudo Wire Frame Relay MIB This MIB describes network management objects defined for FRoPW services over a Packet Switched Network (PSN). As described in the IETF Frame Relay over Pseudowire (FRoPW) draft, draft-ietf-pwe3-frame-relay-01.txt, FR VCs and PW can be mapped in 2 modes: One-to-one mapping mode: a FR VC is mapped to a PW. This mode is described by cpwVcFrTable. Many-to-one mapping mode (a.k.a. port mode): multiple FR VCs assigned to a port are mapped to a PW. This mode is addressed by cpwVcFrPortModeTable. In this mode, all data frames are directed to the associated PSN tunnel regardless of DLCI." REVISION "200312160000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoExperiment 112 } -- Top-level components of this MIB cpwVcFrNotifications OBJECT IDENTIFIER ::= { cpwVcFrMIB 0 } cpwVcFrObjects OBJECT IDENTIFIER ::= { cpwVcFrMIB 1 } cpwVcFrConformance OBJECT IDENTIFIER ::= { cpwVcFrMIB 2 } -- -- -- PW-FR VC Table cpwVcFrTable OBJECT-TYPE SYNTAX SEQUENCE OF CpwVcFrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PW-FR connection table. Each entry in this table represents a FRoPW connection operating in one-to-one mapping mode. This table uses the same index as the generic PW MIB's VC table. Therefore, each entry in cpwVcFrTable has a mapping entry to the generic PW MIB VC table associated by the PW VC index. An entry is created in this table by the agent for every entry in the generic PW MIB VC table with a VcType of 'frameRelay'." ::= { cpwVcFrObjects 1 } cpwVcFrEntry OBJECT-TYPE SYNTAX CpwVcFrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in cpwVcFrTable." INDEX { cpwVcFrPwVcIndex } ::= { cpwVcFrTable 1 } CpwVcFrEntry ::= SEQUENCE { cpwVcFrPwVcIndex CpwVcIndexType, cpwVcFrIfIndex InterfaceIndexOrZero, cpwVcFrDlci DlciNumber, cpwVcFrAdminStatus INTEGER, cpwVcFrOperStatus INTEGER, cpwVcFrPw2FrOperStatus INTEGER, cpwVcFrRowStatus RowStatus, cpwVcFrStorageType StorageType } cpwVcFrPwVcIndex OBJECT-TYPE SYNTAX CpwVcIndexType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the index to an entry in the generic PW table." ::= { cpwVcFrEntry 1 } cpwVcFrIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the index to an entry in the IF-MIB table. In this case, it holds the ifIndex value of the Frame Relay interface associating with the PW connection. The value of zero means that the InterfaceIndex is not known yet." DEFVAL { 0 } ::= { cpwVcFrEntry 2 } cpwVcFrDlci OBJECT-TYPE SYNTAX DlciNumber MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the FR DLCI associating with this entry in cpwVcFrTable. This object can be used together with cpwVcFrIfIndex to lookup FR VC specific information for the FR PVC segment of a FRoPW connection." ::= { cpwVcFrEntry 3 } cpwVcFrAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value of this object indicates the administrative status of the FRoPW connection. The values mean: up(1) - connection is administratively set to the 'up' state for handling traffic. down(2) - connection is administratively set to the 'down' state. No traffic is processed at this state." ::= { cpwVcFrEntry 4 } cpwVcFrOperStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2), unknown (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is actual operational status of the logical FRoPW connection, which is derived from combining the following 2 operational status: cpwVcFrPw2FrOperStatus Operational status of the FR segment on the FRoPW connection. PW Operation Status Operational status of the PW segment of the FRoPW connection. The associated object is cpwVcOperStatus from the generic PW MIB." ::= { cpwVcFrEntry 5 } cpwVcFrPw2FrOperStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2), unknown (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object identifies the current operational status of the FR PVC segment of a FRoPW connection. The values mean: active(1) - segment is currently operational. inactive(2) - segment in currently not operational. unknown(3) - segment current status cannot be determined." ::= { cpwVcFrEntry 6 } cpwVcFrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and deleting this row." ::= { cpwVcFrEntry 7 } cpwVcFrStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the storage type of this row." ::= { cpwVcFrEntry 8 } -- (End of cpwVcFrTable) -- -- -- -- -- PW-FR Port Mode VC Table cpwVcFrPMTable OBJECT-TYPE SYNTAX SEQUENCE OF CpwVcFrPMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PW-FR port mode connection table. Each entry in this table represents a FRoPW connection operating in the port mode. This table uses the same index as the generic PW MIB's VC table. Therefore, each entry in cpwVcFrTable has a mapping entry to the generic PW MIB VC table associated by the PW VC index. An entry is created in this table by the agent for every entry in the generic PW MIB VC table with a VcType of 'frameRelayPortMode'." ::= { cpwVcFrObjects 2 } cpwVcFrPMEntry OBJECT-TYPE SYNTAX CpwVcFrPMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in cpwVcFrPMTable." INDEX { cpwVcFrPMPwVcIndex } ::= { cpwVcFrPMTable 1 } CpwVcFrPMEntry ::= SEQUENCE { cpwVcFrPMPwVcIndex CpwVcIndexType, cpwVcFrPMIfIndex InterfaceIndexOrZero, cpwVcFrPMAdminStatus INTEGER, cpwVcFrPMOperStatus INTEGER, cpwVcFrPMPw2FrOperStatus INTEGER, cpwVcFrPMRowStatus RowStatus, cpwVcFrPMStorageType StorageType } cpwVcFrPMPwVcIndex OBJECT-TYPE SYNTAX CpwVcIndexType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the index to an entry in the generic PW table." ::= { cpwVcFrPMEntry 1 } cpwVcFrPMIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the FR port associating with the FRoPW connection operating in port mode. The value in the index identifies an entry in the IF-MIB table. The value of zero means that the InterfaceIndex is not known yet." ::= { cpwVcFrPMEntry 2 } cpwVcFrPMAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value of this object indicates the administrative status of the FRoPW connection. The values mean: up(1) - connection is administratively set to the 'up' state for handling traffic. down(2) - connection is administratively set to the 'down' state. No traffic is processed at this state." ::= { cpwVcFrPMEntry 3 } cpwVcFrPMOperStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2), unknown (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is actual operational status of the logical FRoPW connection in port mode, which is derived from combining the following 2 operational status: cpwVcFrPMPw2FrOperStatus Operational status of the FR segment on the FRoPW connection. PW Operation Status Operational status of the PW segment of the FRoPW connection. The associated object is cpwVcOperStatus from the generic PW MIB." ::= { cpwVcFrPMEntry 4 } cpwVcFrPMPw2FrOperStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2), unknown (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object identifies the current operational status of the associate FR port. The values mean: active(1) - segment is currently operational. inactive(2) - segment in currently not operational. unknown(3) - segment current status cannot be determined." ::= { cpwVcFrPMEntry 5 } cpwVcFrPMRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and deleting this row." ::= { cpwVcFrPMEntry 6 } cpwVcFrPMStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the storage type of this row." ::= { cpwVcFrPMEntry 7 } -- (End of cpwVcFrPMTable) -- -- -- Conformance Information cpwVcFrCompliances OBJECT IDENTIFIER ::= { cpwVcFrConformance 1 } cpwVcFrGroups OBJECT IDENTIFIER ::= { cpwVcFrConformance 2 } -- Compliance requirement for read-write implementations. cpwVcFrFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents that provide full support for the PW-FR-MIB module." MODULE -- this module MANDATORY-GROUPS { cpwVcFrGroup } GROUP cpwVcFrPMGroup DESCRIPTION "This group is mandatory only for the software which supports Pseudowire Frame Relay Port Mode." OBJECT cpwVcFrRowStatus SYNTAX RowStatus DESCRIPTION "Support for notReady(3) and createAndWait(5) is not required." OBJECT cpwVcFrPMRowStatus SYNTAX RowStatus DESCRIPTION "Support for notReady(3) and createAndWait(5) is not required." ::= { cpwVcFrCompliances 1 } -- Compliance requirement for read-only implementations. cpwVcFrReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents that only provide read-only support for the PW-FR-MIB module." MODULE -- this module MANDATORY-GROUPS { cpwVcFrGroup } GROUP cpwVcFrPMGroup DESCRIPTION "This group is mandatory only for the software which supports Pseudowire Frame Relay Port Mode." OBJECT cpwVcFrIfIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrDlci MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrOperStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrPw2FrOperStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrPMIfIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrPMAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrPMOperStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrPMPw2FrOperStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrPMRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cpwVcFrPMStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { cpwVcFrCompliances 2 } -- units of conformance: cpwVcFrGroup OBJECT-GROUP OBJECTS { cpwVcFrIfIndex, cpwVcFrDlci, cpwVcFrAdminStatus, cpwVcFrOperStatus, cpwVcFrPw2FrOperStatus, cpwVcFrRowStatus, cpwVcFrStorageType } STATUS current DESCRIPTION "Objects to support cpwVcFrTable." ::= { cpwVcFrGroups 1 } cpwVcFrPMGroup OBJECT-GROUP OBJECTS { cpwVcFrPMIfIndex, cpwVcFrPMAdminStatus, cpwVcFrPMOperStatus, cpwVcFrPMPw2FrOperStatus, cpwVcFrPMRowStatus, cpwVcFrPMStorageType } STATUS current DESCRIPTION "Objects to support cpwVcFrPMTable." ::= { cpwVcFrGroups 2 } END