-- ***************************************************************** -- CISCO-IETF-ATM2-PVCTRAP-MIB.my: Supplemental ATM Management Objects -- -- February 1998, Sujatha Narayanan -- -- Copyright (c) 1998 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- -- This mib was extracted from draft-ietf-atommib-atm2-11.txt, -- section 9 titled ATM Related Trap Support. This MIB implements -- only the VCL part of this section. -- -- In the import section, only the required objects have been selected. -- -- The objects selected in this MIB are: -- atmInterfaceExtTable -- atmInterfaceExtEntry -- AtmInterfaceExtEntry -- atmIntfPvcFailures -- atmIntfCurrentlyFailingPVcls -- atmIntfPvcFailuresTrapEnable -- atmIntfPvcNotificationInterval -- atmPreviouslyFailedPVclInterval -- atmCurrentlyFailingPVclTable -- atmCurrentlyFailingPVclEntry -- AtmCurrentlyFailingPVclEntry -- atmCurrentlyFailingPVclTimeStamp -- atmPreviouslyFailedPVclTimeStamp -- atmIntfPvcFailuresTrap CISCO-IETF-ATM2-PVCTRAP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32, Counter32 FROM SNMPv2-SMI TruthValue, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB atmInterfaceConfEntry, atmVclVpi, atmVclVci FROM ATM-MIB ciscoExperiment FROM CISCO-SMI; ciscoIetfAtm2PvctrapMIB MODULE-IDENTITY LAST-UPDATED "9802030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-atm@cisco.com" DESCRIPTION "This MIB Module is a supplement to the ATM-MIB." ::= { ciscoExperiment 29 } atm2MIBObjects OBJECT IDENTIFIER ::= { ciscoIetfAtm2PvctrapMIB 1 } atm2MIBTraps OBJECT IDENTIFIER ::= { ciscoIetfAtm2PvctrapMIB 2 } atmInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ATM interface monitoring information not defined in the atmInterfaceConfTable from the ATM-MIB." ::= { atm2MIBObjects 14 } atmInterfaceExtEntry OBJECT-TYPE SYNTAX AtmInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry extends the atmInterfaceConfEntry defined in ATM MIB. Each entry corresponds to an ATM interface." AUGMENTS { atmInterfaceConfEntry } ::= { atmInterfaceExtTable 1 } AtmInterfaceExtEntry ::= SEQUENCE { atmIntfPvcFailures Counter32, atmIntfCurrentlyFailingPVcls Gauge32, atmIntfPvcFailuresTrapEnable TruthValue, atmIntfPvcNotificationInterval INTEGER, atmPreviouslyFailedPVclInterval INTEGER } atmIntfPvcFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the operational status of a PVCL on this interface has gone down." ::= { atmInterfaceExtEntry 20 } atmIntfCurrentlyFailingPVcls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of VCLs on this interface for which there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and an atmVclOperStatus with a value other than `up'." ::= { atmInterfaceExtEntry 22 } atmIntfPvcFailuresTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the generation of traps in response to PVCL failures on this interface." DEFVAL { false } ::= { atmInterfaceExtEntry 23 } atmIntfPvcNotificationInterval OBJECT-TYPE SYNTAX INTEGER (1..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum interval between the sending of cIntfPvcFailuresTrap notifications for this interface." DEFVAL { 30 } ::= { atmInterfaceExtEntry 24 } atmPreviouslyFailedPVclInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval for storing the failed time in atmPreviouslyFailedPVclTimeStamp" DEFVAL { 0 } ::= { atmInterfaceExtEntry 25 } atmCurrentlyFailingPVclTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmCurrentlyFailingPVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table indicating all VCLs for which there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and an atmVclOperStatus with a value other than `up'." ::= { atm2MIBObjects 21 } atmCurrentlyFailingPVclEntry OBJECT-TYPE SYNTAX AtmCurrentlyFailingPVclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents a VCL for which the atmVclRowStatus is `active', the atmVclConnKind is `pvc', and the atmVclOperStatus is other than `up'." INDEX { ifIndex, atmVclVpi, atmVclVci } ::= { atmCurrentlyFailingPVclTable 1 } AtmCurrentlyFailingPVclEntry ::= SEQUENCE { atmCurrentlyFailingPVclTimeStamp TimeStamp, atmPreviouslyFailedPVclTimeStamp TimeStamp } atmCurrentlyFailingPVclTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which this PVCL began to fail." ::= { atmCurrentlyFailingPVclEntry 1 } atmPreviouslyFailedPVclTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which this PVCL began to fail during the PVC Notification interval." ::= { atmCurrentlyFailingPVclEntry 2 } atmPvcTraps OBJECT IDENTIFIER ::= { atm2MIBTraps 1 } atmPvcTrapsPrefix OBJECT IDENTIFIER ::= { atmPvcTraps 0 } atmIntfPvcFailuresTrap NOTIFICATION-TYPE OBJECTS { ifIndex, atmIntfPvcFailures, atmIntfCurrentlyFailingPVcls } STATUS current DESCRIPTION "A notification indicating that one or more PVCLs on this interface has failed since the last cIntfPvcFailuresTrap was sent. If this trap has not been sent for the last cIntfPvcNotificationInterval, then it will be sent on the next increment of cIntfPvcFailures." ::= { atmPvcTrapsPrefix 1 } -- Conformance Information -- The DRAFT has an error in that atm2MIBConformance is defined as -- having an OID { atm2MIB 2 } while this has already been allocated -- to atm2MIBTraps. The following corrects that error. atm2MIBConformance OBJECT IDENTIFIER ::= { ciscoIetfAtm2PvctrapMIB 3 } atm2MIBGroups OBJECT IDENTIFIER ::= { atm2MIBConformance 1 } atm2MIBCompliances OBJECT IDENTIFIER ::= { atm2MIBConformance 2 } -- Compliance Statements atm2MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement PVC traps." MODULE -- this module MANDATORY-GROUPS { atmSwitchServcHostGroup } -- GROUP atmSwitchServcNotifGroup -- DESCRIPTION -- "This group is optional for systems implementing -- support for an ATM Switch or an ATM Network Service." ::= { atm2MIBCompliances 1 } -- Units of Conformance atmSwitchServcHostGroup OBJECT-GROUP OBJECTS { atmIntfPvcFailures, atmIntfCurrentlyFailingPVcls, atmIntfPvcFailuresTrapEnable, atmIntfPvcNotificationInterval, atmPreviouslyFailedPVclInterval, atmCurrentlyFailingPVclTimeStamp, atmPreviouslyFailedPVclTimeStamp} STATUS current DESCRIPTION "A collection of objects providing information for a Switch/Service/Host that implements PVC traps for an ATM interfaces." ::= { atm2MIBGroups 1 } -- Existing MIB tools do not support NOTIFICATIONS-GROUP syntax -- so we comment it out when committing to source repository. -- It is OK to uncomment this when publishing this MIB. -- atmSwitchServcNotifGroup OBJECT-GROUP -- NOTIFICATIONS { atmIntfPvcFailuresTrap } -- STATUS current -- DESCRIPTION -- "A collection of notifications providing information -- for a Switch/Service that implements ATM interfaces." -- ::= { atm2MIBGroups 2 } END