-- ******************************************************************* -- CISCO-GSLB-SYSTEM-MIB.my: Global Server Load Balancing -- Platform and System Status -- -- Dec 2006, Pawan N -- -- Copyright (c) 2006, 2010-2011 by Cisco Systems Inc. -- All rights reserved. -- ******************************************************************* CISCO-GSLB-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Unsigned32, Gauge32 FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB RowStatus, StorageType, TruthValue FROM SNMPv2-TC InetAddressType, InetAddress, InetAddressDNS FROM INET-ADDRESS-MIB sysName FROM SNMPv2-MIB InterfaceIndexOrZero FROM IF-MIB CiscoGslbNodeServices, CiscoGslbPeerStatus FROM CISCO-GSLB-TC-MIB ciscoMgmt FROM CISCO-SMI; ciscoGslbSystemMIB MODULE-IDENTITY LAST-UPDATED "201106060000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-slb@cisco.com" DESCRIPTION "This MIB module defines objects for network and system information of Global Server Load Balancer(GSLB) as a network device. A GSLB device is used to allocate the least-loaded and proximate resource to the requester. The MIB objects define information about GLSB status, GSLB's peers (other GSLB devices available on its network with which it interacts) information & status, GSLB's proximity information related statistics, etc. Further it defines related notifications. Acronyms and their description: DNS : Domain Name Service (RFC1035). D-proxy : Local DNS name server of the client. Proximity : Refers to the distance or delay, in terms of network topology and not geographic distance, between the requesting client's D-proxy and the resources corresponding to that request. Proximity : To respond to DNS requests with the most probing proximate answers, the GSLB device communicates with a probing device located in each proximity zone to gather round-trip time (RTT) metric information measured between the requesting client's D-proxy and the zone. The GSLB device then directs client requests to an available resource with the lowest RTT value. Probed : This is the device to which the GSLB device device sends a proximity probe. This is done to learn the proximity of the device. DRP : Director Response Protocol (DRP) is a simple User Datagram Protocol (UDP) based application developed by Cisco Systems, Inc. DRP enables Cisco Distributed-Director product to perform global load distribution and content routing in a sophisticated manner that accounts for server availability, relative client-to-server topological proximities, and client-to-server link latency to determine the best server. Using routing table intelligence in the network infrastructure, Distributed-Director transparently redirects end-user service requests to the closest server, as determined by client-to-server topological proximity or client-to-server link latency, resulting in increased access performance seen by the end user. Region : Higher-level geographical groupings that may contain one or more locations. Each location should be assigned to a region. Location : Grouping for devices with common geographical attributes. A location is assigned to a region. A location is also assigned to a zone, which is used for proximity probing. Zone : A network can be logically partioned into zones based on the arrangement of devices and network partion characteristics. A zone can be geographically related to data centers in a continent, a country, or a major city. All devices, such as web servers in a data center, that are located in the same zone have the same proximity value when communicating with other areas of the Internet. Within each zone, there is an active probing device that is configured to accept probing instructions from any GSLB device. Probing here refers to the process of measuring RTT from one probing device to a requesting D-proxy." REVISION "201106060000Z" DESCRIPTION "-Deprecated cgsRegionTable and replaced it with cgsRegionIdTable -Deprecated ciscoGslbSystemMIBCompliance and replaced it with ciscoGslbSystemMIBComplianceRev1 -Deprecated ciscoGslbSystemResourceGroup and replaced it with ciscoGslbSystemResourceLocationGroup and ciscoGslbSystemResourceRegionGroup" REVISION "200612040000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 589 } ciscoGslbSystemMIBNotifs OBJECT IDENTIFIER ::= { ciscoGslbSystemMIB 0 } ciscoGslbSystemMIBObjects OBJECT IDENTIFIER ::= { ciscoGslbSystemMIB 1 } ciscoGslbSystemMIBConform OBJECT IDENTIFIER ::= { ciscoGslbSystemMIB 2 } -- Objects for Notification Control cgsNotifControl OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBObjects 1 } -- Objects for Notification cgsNotifObjects OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBObjects 2 } -- Objects for general status cgsGeneral OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBObjects 3 } -- Objects for status of GSLB peers cgsPeer OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBObjects 4 } -- Objects for Proximity Probes statistics cgsProxZoneStats OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBObjects 5 } -- Objects for Resources cgsResources OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBObjects 6 } -- General Status Objects cgsNodeService OBJECT-TYPE SYNTAX CiscoGslbNodeServices MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of role of the GSLB device amongst its peers." ::= { cgsGeneral 1 } cgsNodeCommIfName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the textual name of the interface used by the GSLB device to communicate with peer GSLB devices. The value of this object must be same as the ifName reported by IF-MIB for the interface instance." ::= { cgsGeneral 2 } cgsNodeCommIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used as an identifier for the interface used by the GSLB device to communicate with peer GSLB devices. The value of this object must be same as the ifIndex reported by IF-MIB for the interface identified by cgsNodeCommIfName." ::= { cgsGeneral 3 } cgsNodeStatus OBJECT-TYPE SYNTAX CiscoGslbPeerStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the status of the GSLB device as known on the GSLB network of peers." ::= { cgsGeneral 4 } cgsNodeLocation OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administratively assigned location for the GSLB device." ::= { cgsGeneral 5 } cgsNodeRegion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the administratively assigned region for the GSLB device. This value corresponds to an instance of cgsLocationRegion from cgsLocationTable." ::= { cgsGeneral 6 } cgsPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF CgsPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the information on peers in the GSLB network of devices." ::= { cgsPeer 1 } cgsPeerEntry OBJECT-TYPE SYNTAX CgsPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in cgsPeerEntryTable. Each entry contains information on the GSLB peers. Entries are added/deleted when a GSLB peer device is added/deleted in GSLB network of peers." INDEX { cgsPeerAddressType, cgsPeerAddress } ::= { cgsPeerTable 1 } CgsPeerEntry ::= SEQUENCE { cgsPeerAddressType InetAddressType, cgsPeerAddress InetAddress, cgsPeerLocation SnmpAdminString, cgsPeerDnsName InetAddressDNS, cgsPeerService CiscoGslbNodeServices, cgsPeerStatus CiscoGslbPeerStatus, cgsPeerVersion SnmpAdminString } cgsPeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the IP address type of the GSLB peer." ::= { cgsPeerEntry 1 } cgsPeerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (1..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the GSLB peer IP address. The type of IP address is identified by cgsPeerAddressType." ::= { cgsPeerEntry 2 } cgsPeerLocation OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administratively assigned location of the GSLB peer. Its value must be same as the value configured in cgsLocationTable." ::= { cgsPeerEntry 3 } cgsPeerDnsName OBJECT-TYPE SYNTAX InetAddressDNS MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the host name assigned uniquely to a GSLB peer. Its value is same as the value of sysName of the GSLB peer." ::= { cgsPeerEntry 4 } cgsPeerService OBJECT-TYPE SYNTAX CiscoGslbNodeServices MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of role the GSLB peer has in a GSLB network of peers. Its value is same as value of cgsNodeService of the GSLB peer." ::= { cgsPeerEntry 5 } cgsPeerStatus OBJECT-TYPE SYNTAX CiscoGslbPeerStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the status of GSLB peer as known to the reporting GSLB device." ::= { cgsPeerEntry 6 } cgsPeerVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the software version installed on the GSLB peer." ::= { cgsPeerEntry 7 } cgsProxZoneTable OBJECT-TYPE SYNTAX SEQUENCE OF CgsProxZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for configuring proximity zones. It consists a list of proximity probing statistics for each configured proximity zone." ::= { cgsProxZoneStats 1 } cgsProxZoneEntry OBJECT-TYPE SYNTAX CgsProxZoneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in cgsProxZoneTable. Each entry contains information on proximity zones and probing statistics. Entries can be added/deleted/modified by administrator action." INDEX { cgsProxZoneName } ::= { cgsProxZoneTable 1 } CgsProxZoneEntry ::= SEQUENCE { cgsProxZoneName SnmpAdminString, cgsProxPrimaryAddressType InetAddressType, cgsProxPrimaryAddress InetAddress, cgsProxSecondaryAddressType InetAddressType, cgsProxSecondaryAddress InetAddress, cgsProxEchoSentReqs Counter32, cgsProxEchoRcvdResps Counter32, cgsProxSentMeasureReqs Counter32, cgsProxRcvdMeasureResps Counter32, cgsProxTotalSentReqs Counter32, cgsProxTotalRcvdResps Counter32, cgsProxSendRate Unsigned32, cgsProxRcvdRate Unsigned32, cgsProxPeakSendRate Unsigned32, cgsProxPeakRcvdRate Unsigned32, cgsProxStorageType StorageType, cgsProxRowStatus RowStatus } cgsProxZoneName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a name given uniquely for a proximity zone." ::= { cgsProxZoneEntry 1 } cgsProxPrimaryAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address type of the primary device being probed in the proximity zone." DEFVAL { ipv4 } ::= { cgsProxZoneEntry 2 } cgsProxPrimaryAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address of the primary device being probed in the proximity zone. The type of IP address is identified by cgsProxPrimaryAddressType. This object is mandatory for row creation." ::= { cgsProxZoneEntry 3 } cgsProxSecondaryAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address type of the secondary device that may be probed in the proximity zone." DEFVAL { ipv4 } ::= { cgsProxZoneEntry 4 } cgsProxSecondaryAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address of the secondary device that may be probed for proximity in the proximity zone. The type of IP address is identified by cgsProxSecondaryAddressType." DEFVAL { "" } ::= { cgsProxZoneEntry 5 } cgsProxEchoSentReqs OBJECT-TYPE SYNTAX Counter32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of DRP echo requests sent by GSLB to all probed devices." ::= { cgsProxZoneEntry 6 } cgsProxEchoRcvdResps OBJECT-TYPE SYNTAX Counter32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of DRP echo responses received by GLSB from all probed devices." ::= { cgsProxZoneEntry 7 } cgsProxSentMeasureReqs OBJECT-TYPE SYNTAX Counter32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of DRP measured requests sent by GSLB to all probed devices." ::= { cgsProxZoneEntry 8 } cgsProxRcvdMeasureResps OBJECT-TYPE SYNTAX Counter32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of DRP measured responses received by GSLB from all probed devices." ::= { cgsProxZoneEntry 9 } cgsProxTotalSentReqs OBJECT-TYPE SYNTAX Counter32 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total of DRP requests sent by GSLB to probed device in the proximity zone." ::= { cgsProxZoneEntry 10 } cgsProxTotalRcvdResps OBJECT-TYPE SYNTAX Counter32 UNITS "responses" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total of DRP responses received by GSLB from all probed devices in the proximity zone." ::= { cgsProxZoneEntry 11 } cgsProxSendRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "rate per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current transmitted DRP request rate per second." ::= { cgsProxZoneEntry 12 } cgsProxRcvdRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "rate per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current received DRP response rate per second." ::= { cgsProxZoneEntry 13 } cgsProxPeakSendRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "rate per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the peak transmitted DRP request rate per second." ::= { cgsProxZoneEntry 14 } cgsProxPeakRcvdRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "rate per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the peak received DRP response rate per second." ::= { cgsProxZoneEntry 15 } cgsProxStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the storage type for this conceptual row." DEFVAL { nonVolatile } ::= { cgsProxZoneEntry 16 } cgsProxRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create/delete an entry in the cgsProxZoneTable." ::= { cgsProxZoneEntry 17 } cgsRegionTable OBJECT-TYPE SYNTAX SEQUENCE OF CgsRegionEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table is used to configure regions on the device. It consists a list of regions configured on the GSLB device." ::= { cgsResources 1 } cgsRegionEntry OBJECT-TYPE SYNTAX CgsRegionEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in cgsRegionTable. Each entry contains the information about a region. Entries can be added/deleted/modified by administrator action." INDEX { cgsRegionName } ::= { cgsRegionTable 1 } CgsRegionEntry ::= SEQUENCE { cgsRegionName SnmpAdminString, cgsRegionComments SnmpAdminString, cgsRegionStorageType StorageType, cgsRegionRowStatus RowStatus } cgsRegionName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies the name given uniquely for a region." ::= { cgsRegionEntry 1 } cgsRegionComments OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the comments associated with the region." DEFVAL { "" } ::= { cgsRegionEntry 2 } cgsRegionStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the storage type for this conceptual row." DEFVAL { nonVolatile } ::= { cgsRegionEntry 3 } cgsRegionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object is used to create/delete an entry in the cgsRegionTable" ::= { cgsRegionEntry 4 } cgsLocationTable OBJECT-TYPE SYNTAX SEQUENCE OF CgsLocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure locations on the device. It consists a list of locations configured on the GSLB device." ::= { cgsResources 2 } cgsLocationEntry OBJECT-TYPE SYNTAX CgsLocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in cgsLocationTable. Each entry contains the information about a location. Entries can be added/deleted/modified by administrator action." INDEX { cgsLocationName } ::= { cgsLocationTable 1 } CgsLocationEntry ::= SEQUENCE { cgsLocationName SnmpAdminString, cgsLocationRegion SnmpAdminString, cgsLocationZone SnmpAdminString, cgsLocationComments SnmpAdminString, cgsLocationStorageType StorageType, cgsLocationRowStatus RowStatus } cgsLocationName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the name given uniquely for a location." ::= { cgsLocationEntry 1 } cgsLocationRegion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a region to which this location instance is associated. This object is mandatory for a row creation." ::= { cgsLocationEntry 2 } cgsLocationZone OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a zone to which this location instance is associated." DEFVAL { "" } ::= { cgsLocationEntry 3 } cgsLocationComments OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the comments associated with the location." DEFVAL { "" } ::= { cgsLocationEntry 4 } cgsLocationStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the storage type for this conceptual row" DEFVAL { nonVolatile } ::= { cgsLocationEntry 5 } cgsLocationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create/delete an entry in the cgsLocationTable" ::= { cgsLocationEntry 6 } cgsRegionIdTable OBJECT-TYPE SYNTAX SEQUENCE OF CgsRegionIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure regions on the device. It consists a list of regions configured on the GSLB device." ::= { cgsResources 3 } cgsRegionIdEntry OBJECT-TYPE SYNTAX CgsRegionIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in cgsRegionIdTable.Each entry contains the information about a region. Entries can be added/deleted/modified by administrator action." INDEX { cgsRegionId } ::= { cgsRegionIdTable 1 } CgsRegionIdEntry ::= SEQUENCE { cgsRegionId Unsigned32, cgsRegionIdName SnmpAdminString, cgsRegionIdComments SnmpAdminString, cgsReqCountPerRegionId Counter32, cgsReqCountRatePerRegionId1Min Gauge32, cgsReqCountRatePerRegionId5Min Gauge32, cgsReqCountRatePerRegionId30Min Gauge32, cgsReqCountRatePerRegionId4Hr Gauge32, cgsAnswerCountPerRegionId Counter32, cgsAnswerCountRatePerRegionId1Min Gauge32, cgsAnswerCountRatePerRegionId5Min Gauge32, cgsAnswerCountRatePerRegionId30Min Gauge32, cgsAnswerCountRatePerRegionId4Hr Gauge32, cgsUnAnswerCountPerRegionId Counter32, cgsUnAnswerCountRatePerRegionId1Min Gauge32, cgsUnAnswerCountRatePerRegionId5Min Gauge32, cgsUnAnswerCountRatePerRegionId30Min Gauge32, cgsUnAnswerCountRatePerRegionId4Hr Gauge32, cgsRegionIdStorageType StorageType, cgsRegionIdRowStatus RowStatus } cgsRegionId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies a region." ::= { cgsRegionIdEntry 1 } cgsRegionIdName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the name given uniquely for a region." ::= { cgsRegionIdEntry 2 } cgsRegionIdComments OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the comments associated with the region." DEFVAL { "" } ::= { cgsRegionIdEntry 3 } cgsReqCountPerRegionId OBJECT-TYPE SYNTAX Counter32 UNITS "number of hits" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of DNS requests received from this region since the GSLB device was last started." ::= { cgsRegionIdEntry 4 } cgsReqCountRatePerRegionId1Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second DNS requests received from this region, calculated during the last one minute interval." ::= { cgsRegionIdEntry 5 } cgsReqCountRatePerRegionId5Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second DNS requests received from this region , calculated during the last 5 minute interval." ::= { cgsRegionIdEntry 6 } cgsReqCountRatePerRegionId30Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second DNS requests received from this region , calculated during the last 30 minute interval." ::= { cgsRegionIdEntry 7 } cgsReqCountRatePerRegionId4Hr OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second DNS requests received from this region , calculated during the last 4 hour interval." ::= { cgsRegionIdEntry 8 } cgsAnswerCountPerRegionId OBJECT-TYPE SYNTAX Counter32 UNITS "number of hits" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of times answers in this region are used in replying for DNS queries, since the GSLB device was last started." ::= { cgsRegionIdEntry 9 } cgsAnswerCountRatePerRegionId1Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second hit count for answers in this region, calculated during the last 1 minute interval." ::= { cgsRegionIdEntry 10 } cgsAnswerCountRatePerRegionId5Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second hit count for answers in this region, calculated during the last 5 minute interval." ::= { cgsRegionIdEntry 11 } cgsAnswerCountRatePerRegionId30Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second hit count for answers in this region, calculated during the last 30 minute interval." ::= { cgsRegionIdEntry 12 } cgsAnswerCountRatePerRegionId4Hr OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second hit count for answers in this region, calculated during the last 4 hour interval." ::= { cgsRegionIdEntry 13 } cgsUnAnswerCountPerRegionId OBJECT-TYPE SYNTAX Counter32 UNITS "number of hits" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of times DNS requests from this region have not been answered, since the GSLB device was last started." ::= { cgsRegionIdEntry 14 } cgsUnAnswerCountRatePerRegionId1Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second unanswered DNS requests from this region, calculated during the last one minute." ::= { cgsRegionIdEntry 15 } cgsUnAnswerCountRatePerRegionId5Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second unanswered DNS requests from this region, calculated during the last 5 minute interval." ::= { cgsRegionIdEntry 16 } cgsUnAnswerCountRatePerRegionId30Min OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second unanswered DNS requests from this region, calculated during the last 30 minute interval." ::= { cgsRegionIdEntry 17 } cgsUnAnswerCountRatePerRegionId4Hr OBJECT-TYPE SYNTAX Gauge32 UNITS "hits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average per second unanswered DNS requests from this region, calculated during the last 4 hour interval." ::= { cgsRegionIdEntry 18 } cgsRegionIdStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the storage type for this conceptual row." DEFVAL { nonVolatile } ::= { cgsRegionIdEntry 19 } cgsRegionIdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create/delete an entry in the cgsRegionIdTable. Users can modify all writable objects in this row when this object value is 'active'. The cgsRegionIdName object need to be set to valid value by the users before user can activate the row." ::= { cgsRegionIdEntry 20 } -- Notification Control Group cgsPeerEventNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the administrative state of sending notifications to signal a GSLB peer status change." DEFVAL { false } ::= { cgsNotifControl 1 } -- Objects for Notification cgsPeerPrevStatus OBJECT-TYPE SYNTAX CiscoGslbPeerStatus MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is used for sending the value of cgsPeerStatus before transitioning to new state." ::= { cgsNotifObjects 1 } -- Notifications ciscoGslbSystemPeerEventStatus NOTIFICATION-TYPE OBJECTS { sysName, cgsPeerDnsName, cgsPeerService, cgsPeerPrevStatus, cgsPeerStatus } STATUS current DESCRIPTION "This notification is sent when the value of cgsPeerStatus changes from one state to another. This notification is reported only by a GSLB device with cgsNodeService value of 'primary'." ::= { ciscoGslbSystemMIBNotifs 1 } -- Conformance ciscoGslbSystemMIBCompliances OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBConform 1 } ciscoGslbSystemMIBGroups OBJECT IDENTIFIER ::= { ciscoGslbSystemMIBConform 2 } -- Compliance ciscoGslbSystemMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Compliance statement for entities which implement the Cisco GSLB System MIB" MODULE -- this module MANDATORY-GROUPS { ciscoGslbSystemGeneralGroup, ciscoGslbSystemPeerGroup, ciscoGslbSystemProxZoneGroup, ciscoGslbSystemResourceGroup, ciscoGslbSystemNotifControlGroup, ciscoGslbSystemNotifObjectsGroup, ciscoGslbSystemNotifGroup } ::= { ciscoGslbSystemMIBCompliances 1 } ciscoGslbSystemMIBComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for entities which implement the Cisco GSLB System MIB" MODULE -- this module MANDATORY-GROUPS { ciscoGslbSystemGeneralGroup, ciscoGslbSystemPeerGroup, ciscoGslbSystemProxZoneGroup, ciscoGslbSystemNotifControlGroup, ciscoGslbSystemNotifObjectsGroup, ciscoGslbSystemNotifGroup, ciscoGslbSystemResourceLocationGroup, ciscoGslbSystemResourceRegionGroup } ::= { ciscoGslbSystemMIBCompliances 2 } -- Units of Conformance ciscoGslbSystemGeneralGroup OBJECT-GROUP OBJECTS { cgsNodeService, cgsNodeCommIfName, cgsNodeCommIfIndex, cgsNodeStatus, cgsNodeLocation, cgsNodeRegion } STATUS current DESCRIPTION "A collection of objects providing general GSLB status." ::= { ciscoGslbSystemMIBGroups 1 } ciscoGslbSystemPeerGroup OBJECT-GROUP OBJECTS { cgsPeerLocation, cgsPeerDnsName, cgsPeerService, cgsPeerStatus, cgsPeerVersion } STATUS current DESCRIPTION "A collection of objects providing GSLB peer status." ::= { ciscoGslbSystemMIBGroups 2 } ciscoGslbSystemProxZoneGroup OBJECT-GROUP OBJECTS { cgsProxPrimaryAddressType, cgsProxPrimaryAddress, cgsProxSecondaryAddressType, cgsProxSecondaryAddress, cgsProxEchoSentReqs, cgsProxEchoRcvdResps, cgsProxSentMeasureReqs, cgsProxRcvdMeasureResps, cgsProxTotalSentReqs, cgsProxTotalRcvdResps, cgsProxSendRate, cgsProxRcvdRate, cgsProxPeakSendRate, cgsProxPeakRcvdRate, cgsProxStorageType, cgsProxRowStatus } STATUS current DESCRIPTION "A collection of objects providing GSLB proximity zone statistics." ::= { ciscoGslbSystemMIBGroups 3 } ciscoGslbSystemResourceGroup OBJECT-GROUP OBJECTS { cgsRegionComments, cgsRegionStorageType, cgsRegionRowStatus, cgsLocationRegion, cgsLocationZone, cgsLocationComments, cgsLocationStorageType, cgsLocationRowStatus } STATUS deprecated DESCRIPTION "A collection of objects providing GSLB resource configurations." ::= { ciscoGslbSystemMIBGroups 4 } ciscoGslbSystemNotifControlGroup OBJECT-GROUP OBJECTS { cgsPeerEventNotifEnable } STATUS current DESCRIPTION "This group of objects controls the sending of notifications defined in this MIB module." ::= { ciscoGslbSystemMIBGroups 5 } ciscoGslbSystemNotifObjectsGroup OBJECT-GROUP OBJECTS { cgsPeerPrevStatus } STATUS current DESCRIPTION "A collection of objects that convey information for notifications defined in this MIB module." ::= { ciscoGslbSystemMIBGroups 6 } ciscoGslbSystemNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoGslbSystemPeerEventStatus } STATUS current DESCRIPTION "A collection of objects providing GSLB System events." ::= { ciscoGslbSystemMIBGroups 7 } ciscoGslbSystemResourceLocationGroup OBJECT-GROUP OBJECTS { cgsLocationRegion, cgsLocationZone, cgsLocationComments, cgsLocationStorageType, cgsLocationRowStatus } STATUS current DESCRIPTION "A collection of objects providing GSLB location resource configurations." ::= { ciscoGslbSystemMIBGroups 8 } ciscoGslbSystemResourceRegionGroup OBJECT-GROUP OBJECTS { cgsRegionIdName, cgsRegionIdComments, cgsReqCountPerRegionId, cgsReqCountRatePerRegionId1Min, cgsReqCountRatePerRegionId5Min, cgsReqCountRatePerRegionId30Min, cgsReqCountRatePerRegionId4Hr, cgsAnswerCountPerRegionId, cgsAnswerCountRatePerRegionId1Min, cgsAnswerCountRatePerRegionId5Min, cgsAnswerCountRatePerRegionId30Min, cgsAnswerCountRatePerRegionId4Hr, cgsUnAnswerCountPerRegionId, cgsUnAnswerCountRatePerRegionId1Min, cgsUnAnswerCountRatePerRegionId5Min, cgsUnAnswerCountRatePerRegionId30Min, cgsUnAnswerCountRatePerRegionId4Hr, cgsRegionIdStorageType, cgsRegionIdRowStatus } STATUS current DESCRIPTION "A collection of objects providing GSLB region resource configurations." ::= { ciscoGslbSystemMIBGroups 9 } END