-- ************************************************************* -- CISCO EPM NOTIFICATION MIB -- MARCH 2002, Tara Jagannathan, John Ahlstrom -- -- Copyright (c) 2002, 2003, 2004 by Cisco Systems, Inc. -- All rights reserved. -- ************************************************************* CISCO-EPM-NOTIFICATION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Unsigned32, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TimeStamp FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB ciscoMgmt FROM CISCO-SMI ; ciscoEpmNotificationMIB MODULE-IDENTITY LAST-UPDATED "200406070000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: tac@cisco.com" DESCRIPTION "Notifications directly from hardware and software and processed notifications from various management applications can be further processed and forwarded by still other management applications to indicate the status of devices and software (managed objects). The status of these managed objects can be reported by traps. The CISCO-EPM-NOTIFICATION-MIB contains the trap structure which carries the identity and status info of the managed object as analyzed by such an event processor. It is not possible for receivers of these traps to query the mib objects. A unique but optional feature of the application generating the trap defined in this mib is the ability to contain multiple partitions in the same system running the application. A 'Partition' is a logical grouping of a set of managed devices. These devices can belong to only one partition at any given time. The trap structure will contain information on the exact partition number and the partition name of the device where it resides. The need for trap generation is to enable multiple management applications in the network to have a consolidated view of the whole network of Cisco and non-Cisco devices." REVISION "200406070000Z" DESCRIPTION "Updated the cenAlarmEntry to include new attributes. The new attributes carries information that adds more value to the already existing trap structure. The Management application computes events for a device via polling snmp mib objects on the device and/or by listening to SNMP Traps. Multiple events on a single device roll up into what is called an Alert - there can be only one alert for a given device at any given time. The objects contained in the cenAlarmEntry are the same for both Alert and Event based notification. The attribute cenAlarmMode added in this revision of the mib can be used to distinguish between the Alert based and event based notification. In case of event based notification, the cenAlertID would contain the alert id, as computed by the management system, to which the generated event has been rolled up. Traps generated from systems that support mutiple Partition, the cenPartitionNumber and cenPartitionName attributes will carry the exact partition details of the device for which the trap is generated. Through the management application user interface, the user can customize few attributes of the trap structure. Two attributes included in this mib revision that allows the user to customize each trap sent out are cenCustomerIdentification and cenCustomerRevision. ciscoEpmNotificationObjectsGroup, ciscoEpmNotificationAlarm, and ciscoEpmNotificationMIBCompliance have been deprecated in this revision. ciscoEpmNotificationAlarmRev1, ciscoEpmNotificationAlarmGroupRev1, ciscoEpmNotificationMIBComplianceRev1, and ciscoEpmNotificationObjectsGroupRev1 have been newly created in this revision." REVISION "200308210000Z" DESCRIPTION "Included imports for Integer32, Unsigned32, and NOTIFICATION-GROUP." REVISION "200207281420Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 311 } -- MIB Object Definitions ciscoEpmNotificationMIBNotifs OBJECT IDENTIFIER ::= { ciscoEpmNotificationMIB 0 } ciscoEpmNotificationMIBObjects OBJECT IDENTIFIER ::= { ciscoEpmNotificationMIB 1 } ciscoEpmNotificationMIBConform OBJECT IDENTIFIER ::= { ciscoEpmNotificationMIB 2 } cenAlarmData OBJECT IDENTIFIER ::= { ciscoEpmNotificationMIBObjects 1} cenAlarmTableMaxLength OBJECT-TYPE SYNTAX Unsigned32 ( 1..4294967295 ) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of entries permissible in the cenAlarmTable." DEFVAL { 1 } ::= { cenAlarmData 1 } cenAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF CenAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the device identification and alarm value. The maximum number of entries permissible in this table is defined by cenAlarmTableMaxLength. When the number of entries in the table reaches the maximum limit, the next entry would replace the oldest existing entry in the table." ::= { cenAlarmData 2 } cenAlarmEntry OBJECT-TYPE SYNTAX CenAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single device status alarm. An entry is created when an alarm is processed." INDEX { cenAlarmIndex } ::= { cenAlarmTable 1 } CenAlarmEntry ::= SEQUENCE { cenAlarmIndex Unsigned32, cenAlarmVersion SnmpAdminString, cenAlarmTimestamp TimeStamp, cenAlarmUpdatedTimestamp TimeStamp, cenAlarmInstanceID SnmpAdminString, cenAlarmStatus Integer32, cenAlarmStatusDefinition SnmpAdminString, cenAlarmType INTEGER, cenAlarmCategory Integer32, cenAlarmCategoryDefinition SnmpAdminString, cenAlarmServerAddressType InetAddressType, cenAlarmServerAddress InetAddress, cenAlarmManagedObjectClass SnmpAdminString, cenAlarmManagedObjectAddressType InetAddressType, cenAlarmManagedObjectAddress InetAddress, cenAlarmDescription OCTET STRING, cenAlarmSeverity Integer32, cenAlarmSeverityDefinition SnmpAdminString, cenAlarmTriageValue Integer32, cenEventIDList OCTET STRING, cenUserMessage1 SnmpAdminString, cenUserMessage2 SnmpAdminString, cenUserMessage3 SnmpAdminString, cenAlarmMode INTEGER, cenPartitionNumber Unsigned32, cenPartitionName SnmpAdminString, cenCustomerIdentification SnmpAdminString, cenCustomerRevision SnmpAdminString, cenAlertID SnmpAdminString } -- Alarm attributes cenAlarmIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A monotonically increasing integer for the sole purpose of indexing the attributes in ciscoEpmNotificationMIBObjects. When the maximum value is reached, this value wraps back to 1." ::= { cenAlarmEntry 1 } cenAlarmVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The release version of this MIB. The version string will be of the form .." ::= { cenAlarmEntry 2 } cenAlarmTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the alarm was raised." ::= { cenAlarmEntry 3 } cenAlarmUpdatedTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Alarms persist over time and can have their field(s) change values. The last time a field(s) changed, this alarm is updated. The updated time denotes this time. Each alarm is identified by the unique alarm instance id, cenAlarmInstanceID." ::= { cenAlarmEntry 4 } cenAlarmInstanceID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Unique Alarm Instance ID." ::= { cenAlarmEntry 5 } cenAlarmStatus OBJECT-TYPE SYNTAX Integer32 (1..250) MAX-ACCESS read-only STATUS current DESCRIPTION "The alarm status indicates the status of the alarm in integer value." ::= { cenAlarmEntry 6 } cenAlarmStatusDefinition OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The short description of the status of the alarm. The string is formatted in ',' tuples. The value is the same value that the 'cenAlarmStatus' attribute holds. contains one line description of the alarm status generated." ::= { cenAlarmEntry 7 } cenAlarmType OBJECT-TYPE SYNTAX INTEGER { unknown(1), direct(2), indirect(3), mixed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "unknown: When the value for this attribute could not be determined. direct: Denotes an alarm generated by a set of events where all events are reported by an observation(s) of a managed object. indirect: Denotes an alarm generated by a set of events where all events were deduced or inferred by the status of managed objects as determined by the network management system. mixed: Denotes an alarm generated by a set of events which were either direct or indirect." ::= { cenAlarmEntry 8 } cenAlarmCategory OBJECT-TYPE SYNTAX Integer32 (1..250) MAX-ACCESS read-only STATUS current DESCRIPTION "The category of the alarm generated represented in integer value." ::= { cenAlarmEntry 9 } cenAlarmCategoryDefinition OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The short description of the category of the alarm generated. The String is formatted in ',' tuples. The value is the same value that the 'cenAlarmCategory' attribute holds. contains one line description of the alarm category generated." ::= { cenAlarmEntry 10 } cenAlarmServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Internet address by which the server is reachable. The Server is the server that is generating this trap." ::= { cenAlarmEntry 11 } cenAlarmServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address or the DNS name of the Management Server that raised this alarm to be notified." ::= { cenAlarmEntry 12 } cenAlarmManagedObjectClass OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The class of the managed object for which this alarm was generated. For example, Router, Switch, GateKeeper and VoicePort." ::= { cenAlarmEntry 13 } cenAlarmManagedObjectAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Internet address by which the managed object is reachable." ::= { cenAlarmEntry 14 } cenAlarmManagedObjectAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address or the DNS name of the Managed Object." ::= { cenAlarmEntry 15 } cenAlarmDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "A detailed description of the alarm." ::= { cenAlarmEntry 16 } cenAlarmSeverity OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The alarm severity indicates the severity of the alarm in integer value." ::= { cenAlarmEntry 17 } cenAlarmSeverityDefinition OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The short description of the severity of the alarm generated. The String is formatted in ',' tuples. The value is the same value that the 'cenAlarmSeverity ' attribute holds. contains one line description of the alarm severity generated." ::= { cenAlarmEntry 18 } cenAlarmTriageValue OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The triage value of an alarm is a hierarchical weighting value (applied by the application, and more importantly customizable by the end user) to allow an artificial form of evaluating impact, interest, or other user-determined functions between alarms. The value is a positive number or zero where zero denotes an undetermined or uncomputable value." ::= { cenAlarmEntry 19 } cenEventIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "Comma separated list of the Unique Event identifiers that led to the generation of this Alarm." ::= { cenAlarmEntry 20 } cenUserMessage1 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "User input message. This value can be configured." ::= { cenAlarmEntry 21 } cenUserMessage2 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "User input message. This value can be configured." ::= { cenAlarmEntry 22 } cenUserMessage3 OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "User input message. This value can be configured." ::= { cenAlarmEntry 23 } cenAlarmMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), alert(2), event(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "unknown: When the value for this attribute could not be determined. alert: Denotes an alarm generated by a set of events where all events are reported by polling of managed objects and/or listening to SNMP notifications. event: Denotes an event generated by polling of managed ojects and/or listening to SNMP notifications." ::= { cenAlarmEntry 24 } cenPartitionNumber OBJECT-TYPE SYNTAX Unsigned32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "In traps generated by the management application that support multiple partitions, the attribute will carry the integer value assigned to identify the logical group where the managed device resides." ::= { cenAlarmEntry 25 } cenPartitionName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "In traps generated by the management application that support multiple partitions, the attribute will carry the name assigned to identify the logical group where the managed device resides." ::= { cenAlarmEntry 26 } cenCustomerIdentification OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "User input message. The attribute takes in a free format text. This attribute can be used by advanced management applications to sort responses from the fault management server." ::= { cenAlarmEntry 27 } cenCustomerRevision OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "User input message. The attribute takes in a free format text. This attribute can be used by advanced management applications to sort responses from the fault management server." ::= { cenAlarmEntry 28 } cenAlertID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "In event based notification, this attribute will contain the alert id to which the generated event has been rolled up to. In alert based notification, the cenAlarmInstanceId and cenAlertID would be identical." ::= { cenAlarmEntry 29 } ciscoEpmNotificationAlarm NOTIFICATION-TYPE OBJECTS { cenAlarmVersion, cenAlarmTimestamp, cenAlarmUpdatedTimestamp, cenAlarmInstanceID, cenAlarmStatus, cenAlarmStatusDefinition, cenAlarmType, cenAlarmCategory, cenAlarmCategoryDefinition, cenAlarmServerAddressType, cenAlarmServerAddress, cenAlarmManagedObjectClass, cenAlarmManagedObjectAddressType, cenAlarmManagedObjectAddress, cenAlarmDescription, cenAlarmSeverity, cenAlarmSeverityDefinition, cenAlarmTriageValue, cenEventIDList, cenUserMessage1, cenUserMessage2, cenUserMessage3 } STATUS deprecated DESCRIPTION "Notification of the status of the managed object as generated by the management server. New attributes are added to the ciscoEpmNotificationAlarmRev1. Hence this notification is deprecated." ::= { ciscoEpmNotificationMIBNotifs 1 } ciscoEpmNotificationAlarmRev1 NOTIFICATION-TYPE OBJECTS { cenAlarmVersion, cenAlarmTimestamp, cenAlarmUpdatedTimestamp, cenAlarmInstanceID, cenAlarmStatus, cenAlarmStatusDefinition, cenAlarmType, cenAlarmCategory, cenAlarmCategoryDefinition, cenAlarmServerAddressType, cenAlarmServerAddress, cenAlarmManagedObjectClass, cenAlarmManagedObjectAddressType, cenAlarmManagedObjectAddress, cenAlarmDescription, cenAlarmSeverity, cenAlarmSeverityDefinition, cenAlarmTriageValue, cenEventIDList, cenUserMessage1, cenUserMessage2, cenUserMessage3, cenAlarmMode, cenPartitionNumber, cenPartitionName, cenCustomerIdentification, cenCustomerRevision, cenAlertID } STATUS current DESCRIPTION "Notification of the status of the managed object as generated by the management server." ::= { ciscoEpmNotificationMIBNotifs 2 } -- Conformance information ciscoEpmNotificationMIBCompliances OBJECT IDENTIFIER ::= { ciscoEpmNotificationMIBConform 1 } ciscoEpmNotificationMIBGroups OBJECT IDENTIFIER ::= { ciscoEpmNotificationMIBConform 2 } -- Compliance ciscoEpmNotificationMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO-EPM-NOTIFICATION-MIB. New attributes are included in ciscoEpmNotificationMIBComplianceRev1. Hence this object is deprecated." MODULE -- this module MANDATORY-GROUPS { ciscoEpmNotificationObjectsGroup, ciscoEpmNotificationAlarmGroup } GROUP ciscoEpmAlarmConfigGroup DESCRIPTION "This group is optional." OBJECT cenAlarmTableMaxLength MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cenAlarmVersion MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmTimestamp MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmUpdatedTimestamp MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmInstanceID MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmStatus MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmStatusDefinition MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmType MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmCategory MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmCategoryDefinition MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmServerAddressType MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmServerAddress MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmManagedObjectClass MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmManagedObjectAddressType MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmManagedObjectAddress MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmDescription MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmSeverity MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmSeverityDefinition MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmTriageValue MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenEventIDList MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenUserMessage1 MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenUserMessage2 MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenUserMessage3 MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." ::= { ciscoEpmNotificationMIBCompliances 1 } ciscoEpmNotificationMIBComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO-EPM-NOTIFICATION-MIB." MODULE -- this module MANDATORY-GROUPS { ciscoEpmNotificationObjectsGroupRev1, ciscoEpmNotificationAlarmGroupRev1 } GROUP ciscoEpmAlarmConfigGroup DESCRIPTION "This group is optional." OBJECT cenAlarmTableMaxLength MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cenAlarmVersion MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmTimestamp MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmUpdatedTimestamp MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmInstanceID MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmStatus MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmStatusDefinition MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmType MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmCategory MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmCategoryDefinition MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmServerAddressType MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmServerAddress MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmManagedObjectClass MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmManagedObjectAddressType MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmManagedObjectAddress MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmDescription MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmSeverity MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmSeverityDefinition MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmTriageValue MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenEventIDList MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenUserMessage1 MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenUserMessage2 MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenUserMessage3 MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlarmMode MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenPartitionNumber MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenPartitionName MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenCustomerIdentification MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenCustomerRevision MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." OBJECT cenAlertID MIN-ACCESS accessible-for-notify DESCRIPTION "Read access is not required." ::= { ciscoEpmNotificationMIBCompliance 2 } -- Units of Conformance ciscoEpmNotificationAlarmGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoEpmNotificationAlarm } STATUS deprecated DESCRIPTION "The collection of notifications used to indicate managed object status. ciscoEpmNotificationAlarmGroupRev1 is defined. Hence this object is deprecated." ::= { ciscoEpmNotificationMIBGroups 1 } ciscoEpmNotificationObjectsGroup OBJECT-GROUP OBJECTS { cenAlarmVersion, cenAlarmTimestamp, cenAlarmUpdatedTimestamp, cenAlarmInstanceID, cenAlarmStatus, cenAlarmStatusDefinition, cenAlarmType, cenAlarmCategory, cenAlarmCategoryDefinition, cenAlarmServerAddressType, cenAlarmServerAddress, cenAlarmManagedObjectClass, cenAlarmManagedObjectAddressType, cenAlarmManagedObjectAddress, cenAlarmDescription, cenAlarmSeverity, cenAlarmSeverityDefinition, cenAlarmTriageValue, cenEventIDList, cenUserMessage1, cenUserMessage2, cenUserMessage3 } STATUS deprecated DESCRIPTION "Trap reflecting the alarm. New attributes are added to the new notification ciscoEpmNotificationObjectsGroupRev1. Hence this object is deprecated." ::= { ciscoEpmNotificationMIBGroups 2 } ciscoEpmAlarmConfigGroup OBJECT-GROUP OBJECTS { cenAlarmTableMaxLength } STATUS current DESCRIPTION "A collection of objects providing information about the total number of cenAlarmTable entries maintained." ::= { ciscoEpmNotificationMIBGroups 3 } ciscoEpmNotificationAlarmGroupRev1 NOTIFICATION-GROUP NOTIFICATIONS { ciscoEpmNotificationAlarmRev1 } STATUS current DESCRIPTION "The collection of notifications used to indicate managed object status." ::= { ciscoEpmNotificationMIBGroups 4 } ciscoEpmNotificationObjectsGroupRev1 OBJECT-GROUP OBJECTS { cenAlarmVersion, cenAlarmTimestamp, cenAlarmUpdatedTimestamp, cenAlarmInstanceID, cenAlarmStatus, cenAlarmStatusDefinition, cenAlarmType, cenAlarmCategory, cenAlarmCategoryDefinition, cenAlarmServerAddressType, cenAlarmServerAddress, cenAlarmManagedObjectClass, cenAlarmManagedObjectAddressType, cenAlarmManagedObjectAddress, cenAlarmDescription, cenAlarmSeverity, cenAlarmSeverityDefinition, cenAlarmTriageValue, cenEventIDList, cenUserMessage1, cenUserMessage2, cenUserMessage3, cenAlarmMode, cenPartitionNumber, cenPartitionName, cenCustomerIdentification, cenCustomerRevision, cenAlertID } STATUS current DESCRIPTION "Notification reflecting the alarm." ::= { ciscoEpmNotificationMIBGroups 5 } END