-- ***************************************************************** -- CISCO-ENTITY-EXT-MIB.my -- -- Cisco Extension to ENTITY-MIB(RFC2737) -- -- April 2001, A S Kiran Koushik -- May 2004, Arul Mozhi -- -- Copyright (c) 2001-2003, 2004, 2008 by cisco Systems Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-ENTITY-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB entPhysicalIndex, entPhysicalEntry FROM ENTITY-MIB Unsigned64 FROM CISCO-TC ciscoMgmt FROM CISCO-SMI; ciscoEntityExtMIB MODULE-IDENTITY LAST-UPDATED "200811240000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "This MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entityPhysicalTable to represent information related to entities of class module(entPhysicalClass = 'module') which have a Processor. A processor module is defined as a physical entity that has a CPU, RAM and NVRAM so that it can independently - load a bootable image - save configuration. This module is the entry point for external applications like SNMP Manager, CLI, FTP etc. Line card is an interface card with at least a Processor and RAM. This might be referred to as Service Module in some cisco products. A configuration register is a 16 bit software register. The configuration register is mainly used to check for instructions on where to find the Cisco Operating System software. Some other functions of configuration register are: - To select a boot source and default boot filename. - To enable or disable the Break function. - To control broadcast addresses. - To set the console terminal baud rate. - To load operating software from Flash memory. - To allow us to manually boot the system using the boot command at the bootstrap program prompt. Booting is the process of initializing the hardware and starting the Operating System." REVISION "200811240000Z" DESCRIPTION "Added following new objects to ceExtPhysicalProcessorTable. ceExtProcessorRamOverflow and ceExtHCProcessorRam Added following new groups to ciscoEntityExtMIBGroups. ceExtPhyProcessorOverflowGroup and ceExtPhyProcessorHCGroup. Added a new compliance ciscoEntityExtMIBComplianceRev3 which deprecates ciscoEntityExtMIBComplianceRev2." REVISION "200407060000Z" DESCRIPTION "Added a new table object 'ceExtEntPhysicalTable' ." REVISION "200403030000Z" DESCRIPTION "Importing Unsigned32 from SNMPv2-SMI, instead of CISCO-TC." REVISION "200401260000Z" DESCRIPTION "Added new enum to ceExtEntityLEDType." REVISION "200308240000Z" DESCRIPTION "Added ceExtEntityLEDTable. Added ceExtKickstartImageList to ceExtConfigRegTable. Added new group ciscoEntityExtLEDGroup. Added group ceExtSysBootImageListGroupRev1." REVISION "200105170000Z" DESCRIPTION "Corrected the description for the TC ConfigRegisterValue." REVISION "200104050000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 195 } ciscoEntityExtMIBObjects OBJECT IDENTIFIER ::= { ciscoEntityExtMIB 1 } -- textual conventions ConfigRegisterValue ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x" STATUS current DESCRIPTION "An Integer containing the value of config register. The definition of individual bits from right to left when set are as follows: 00 to 03 Boot Fields(Refer below for explanation). 04 to 05 Not Used. 06 Causes system software to ignore the contents of NVRAM. 07 Enable the original equipment manufacturer (OEM) bit. 08 The Break function is disabled. 09 Not used. 10 Broadcast based on 0.0.0.0 IP address. 11 to 12 Defines the console baud rate as below: Bits 11 & 12 unset: 9600 baud(default), Bit 11 set & 12 unset: 4800 baud, Bit 11 unset & 12 set: 1200 baud, Bit 11 set & 12 set: 2400 baud 13 Boots default Flash software if network boot fails. 14 IP broadcasts do not have network numbers. 15 Enables diagnostic messages and ignores the contents of NVRAM. Meanings for different values of Boot Fields (Bits 00 to 03) are explained below: Value(in hex) Description ------------ ----------- 00 On powerup or reload, the system remains at the ROM monitor prompt (rommon>), awaiting a user command to boot the system manually by means of the rommon boot command. 01 On powerup or reload, the system loads the system image found in onboard Flash memory. 02 to On powerup or reload, the system loads 0F the system image specified by ceExtSysBootImageList. It tries to boot the image in the order in which the image names are entered in ceExtSysBootImageList. If it cannot boot any image in the ceExtSysBootImageList, it stays in ROM monitor mode." SYNTAX OCTET STRING (SIZE (2)) BootImageList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This contains a list of boot images, each separated by the ';' (semi-colon) character. The following provides a syntax for parsing a single boot image list item. :[filename] | can be (but not limited to): flash, bootflash, slot0, rom, C The transfer protocol used in the can be (but not limited to): tftp, ftp, rcp, mop. The following is en example containing two boot image names: disk0:c7100-ik2s-mz;tftp://dirt/c7100-ik2s-mz If the filename is not specified, then the first file on the will be used. If the last two characters in the returned value are ';+' this indicates that additional boot image items are configured on the device but can not be returned because the maximum string size limitation would be exceeded. For example: disk0:image1;disk0:image2;+" SYNTAX OCTET STRING (SIZE (0..255)) -- ceExtPhysicalProcessorTable ceExtPhysicalProcessorTable OBJECT-TYPE SYNTAX SEQUENCE OF CeExtPhysicalProcessorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ceExtPhysicalProcessorTable extends the ENTITY-MIB entPhysicalTable for modules (Non FRUs(Field Replacable Units) or FRUs)." REFERENCE "RFC2737: Section 2.12.1" ::= { ciscoEntityExtMIBObjects 1 } ceExtPhysicalProcessorEntry OBJECT-TYPE SYNTAX CeExtPhysicalProcessorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A ceExtPhysicalProcessorTable entry extends a corresponding entPhysicalTable entry of class module(entPhysicalClass = 'module'). A processor module or line card which has a processor will have an entry in this table. A processor module or line card having multiple processors and is a SMP(Symmetric multi processor) system will have only one entry corresponding to all the processors since the resources defined below are shared. A processor module or line card having multiple processors and is not an SMP system would register the processors as separate entities. Entries are created by the agent at the system power-up or module insertion. Entries are removed when the module is reset or removed." INDEX { entPhysicalIndex } ::= { ceExtPhysicalProcessorTable 1 } CeExtPhysicalProcessorEntry ::= SEQUENCE { ceExtProcessorRam Unsigned32, ceExtNVRAMSize Unsigned32, ceExtNVRAMUsed Unsigned32, ceExtProcessorRamOverflow Unsigned32, ceExtHCProcessorRam Unsigned64 } ceExtProcessorRam OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes of RAM available on the Processor." ::= { ceExtPhysicalProcessorEntry 1 } ceExtNVRAMSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes of NVRAM in the entity. A value of 0 for this object means the entity does not support NVRAM or NVRAM information is not available." ::= { ceExtPhysicalProcessorEntry 2 } ceExtNVRAMUsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes of NVRAM in use. This object is irrelevant if ceExtNVRAMSize is 0." ::= { ceExtPhysicalProcessorEntry 3 } ceExtProcessorRamOverflow OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the upper 32-bit of ceExtProcessorRam. This object needs to be supported only if the available RAM bytes exceeds 32-bit, otherwise this object value would be set to 0." ::= { ceExtPhysicalProcessorEntry 4 } ceExtHCProcessorRam OBJECT-TYPE SYNTAX Unsigned64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the total number of bytes of RAM available on the Processor. This object is a 64-bit version of ceExtProcessorRam." ::= { ceExtPhysicalProcessorEntry 5 } ceExtConfigRegTable OBJECT-TYPE SYNTAX SEQUENCE OF CeExtConfigRegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ceExtConfigRegTable extends the ENTITY-MIB entPhysicalTable." REFERENCE "RFC2737: Section 2.12.1" ::= { ciscoEntityExtMIBObjects 2 } ceExtConfigRegEntry OBJECT-TYPE SYNTAX CeExtConfigRegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A ceExtConfigRegTable entry extends a corresponding entPhysicalTable entry of class module which has a configuration register. Entries are created by the agent at the system power-up or module insertion. Entries are removed when the module is reset or removed." INDEX { entPhysicalIndex } ::= { ceExtConfigRegTable 1 } CeExtConfigRegEntry ::= SEQUENCE { ceExtConfigRegister ConfigRegisterValue, ceExtConfigRegNext ConfigRegisterValue, ceExtSysBootImageList BootImageList, ceExtKickstartImageList BootImageList } ceExtConfigRegister OBJECT-TYPE SYNTAX ConfigRegisterValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of configuration register with which the processor module booted." ::= { ceExtConfigRegEntry 1 } ceExtConfigRegNext OBJECT-TYPE SYNTAX ConfigRegisterValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of configuration register in the processor module at next reboot. Just after the reboot this has the same value as ceExtConfigRegister." ::= { ceExtConfigRegEntry 2 } ceExtSysBootImageList OBJECT-TYPE SYNTAX BootImageList MAX-ACCESS read-write STATUS current DESCRIPTION "The list of system boot images which can be used for booting." DEFVAL { "" } ::= { ceExtConfigRegEntry 3 } ceExtKickstartImageList OBJECT-TYPE SYNTAX BootImageList MAX-ACCESS read-write STATUS current DESCRIPTION "The list of system kickstart images which can be used for booting." DEFVAL { "" } ::= { ceExtConfigRegEntry 4 } -- ceExtEntityLEDTable ceExtEntityLEDTable OBJECT-TYPE SYNTAX SEQUENCE OF CeExtEntityLEDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information of LED on an entity." ::= { ciscoEntityExtMIBObjects 3 } ceExtEntityLEDEntry OBJECT-TYPE SYNTAX CeExtEntityLEDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the ceExtEntityLEDTable, containing information about an LED on an entity, identified by entPhysicalIndex." INDEX { entPhysicalIndex, ceExtEntityLEDType } ::= { ceExtEntityLEDTable 1 } CeExtEntityLEDEntry ::= SEQUENCE { ceExtEntityLEDType INTEGER, ceExtEntityLEDColor INTEGER } ceExtEntityLEDType OBJECT-TYPE SYNTAX INTEGER { status(1), system(2), active(3), power(4), battery(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of LED on this entity. 'status' - indicates the entity status. 'system' - indicates the overall system status. 'active' - the redundancy status of a module, for e.g. supervisor module. 'power' - indicates sufficient power availability for all modules. 'battery'- indicates the battery status." REFERENCE "Cisco MDS 9500 Series Hardware Installation Guide, Product Overview." ::= { ceExtEntityLEDEntry 1 } ceExtEntityLEDColor OBJECT-TYPE SYNTAX INTEGER { off(1), green(2), amber(3), red(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The color of the LED." REFERENCE "Cisco MDS 9500 Series Multilayer Switches, Product Overview." ::= { ceExtEntityLEDEntry 2 } -- ceExtEntityPhysicalTable ceExtEntPhysicalTable OBJECT-TYPE SYNTAX SEQUENCE OF CeExtEntPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains additional information about a particular physical entity. This table augments the 'entPhysicalTable' of the ENTITY-MIB." REFERENCE "RFC2737: Section 2.12.1" ::= { ciscoEntityExtMIBObjects 4 } ceExtEntPhysicalEntry OBJECT-TYPE SYNTAX CeExtEntPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the 'ceExtEntPhysicalTable', containing additional information about a physical entity, identified by 'entPhysicalIndex'." AUGMENTS { entPhysicalEntry } ::= { ceExtEntPhysicalTable 1 } CeExtEntPhysicalEntry ::= SEQUENCE { ceEntPhysicalSecondSerialNum SnmpAdminString } ceEntPhysicalSecondSerialNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the vendor-specific second serial number string for the physical entity. The first serial number string of the physical entity is represented in the value of corresponding instance of the 'entPhysicalSerialNum' object. On the first instantiation of an physical entity, the value of this object is the correct vendor-assigned second serial number, if this information is available to the agent. If the second serial number is unknown or non-existent, then the value of this object will be a zero-length string instead. Note that implementations which can correctly identify the second serial numbers of all installed physical entities do not need to provide write access to this object. Agents which cannot provide non-volatile storage for the second serial number strings are not required to implement write access for this object. Not every physical component will have a serial number, or even need one. Physical entities for which the associated value of the entPhysicalIsFRU object is equal to 'false(2)' (e.g., the repeater ports within a repeater module), do not need their own unique serial number. An agent does not have to provide write access for such entities, and may return a zero-length string. If write access is implemented for an instance of 'ceEntPhysicalSecondSerialNum', and a value is written into the instance, the agent must retain the supplied value in the 'ceEntPhysicalSecondSerialNum' instance associated with the same physical entity for as long as that entity remains instantiated. This includes instantiations across all re- initializations/reboots of the network management system, including those which result in a change of the physical entity's entPhysicalIndex value." DEFVAL { "" } ::= { ceExtEntPhysicalEntry 1 } -- Notifications ceExtMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoEntityExtMIB 2 } ciscoEntityExtMIBNotifications OBJECT IDENTIFIER ::= { ceExtMIBNotificationPrefix 0 } -- conformance information ciscoEntityExtMIBConformance OBJECT IDENTIFIER ::= { ciscoEntityExtMIB 3 } ciscoEntityExtMIBCompliances OBJECT IDENTIFIER ::= { ciscoEntityExtMIBConformance 1 } ciscoEntityExtMIBGroups OBJECT IDENTIFIER ::= { ciscoEntityExtMIBConformance 2 } -- compliance statements ciscoEntityExtMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Compliance for SNMP Entities which support modules with CPU, NVRAM and configuration register." MODULE -- this module MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } GROUP ciscoEntityExtConfigRegGroup DESCRIPTION "The ciscoEntityExtConfigRegGroup is an optional group containing objects providing information about configuration register." GROUP ceExtSysBootImageListGroup DESCRIPTION "This group is an optional group containing an object which provides information about the system boot images." ::= { ciscoEntityExtMIBCompliances 1 } ciscoEntityExtMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Compliance for SNMP Entities which support modules with CPU, NVRAM and configuration register." MODULE -- this module MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } GROUP ciscoEntityExtConfigRegGroup DESCRIPTION "The ciscoEntityExtConfigRegGroup is an optional group containing objects providing information about configuration register." GROUP ceExtSysBootImageListGroup DESCRIPTION "This group is an optional group containing an object which provides information about the system boot images." GROUP ciscoEntityExtLEDGroup DESCRIPTION "This group is an optional group containing an object which provides LED information." GROUP ceExtSysBootImageListGroupRev1 DESCRIPTION "This group is an optional group containing an object which provides information about the system boot images." ::= { ciscoEntityExtMIBCompliances 2 } ciscoEntityExtMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "Compliance for SNMP Entities which support modules with CPU, NVRAM and configuration register." MODULE -- this module MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } GROUP ciscoEntityExtConfigRegGroup DESCRIPTION "The ciscoEntityExtConfigRegGroup is an optional group containing objects providing information about configuration register." GROUP ceExtSysBootImageListGroup DESCRIPTION "This group is an optional group containing an object which provides information about the system boot images." GROUP ciscoEntityExtLEDGroup DESCRIPTION "This group is an optional group containing an object which provides LED information." GROUP ceExtSysBootImageListGroupRev1 DESCRIPTION "This group is an optional group containing an object which provides information about the system boot images." GROUP ciscoExtEntityPhysicalGroup DESCRIPTION "This group is an optional group containing an object which provides additional information about the physical entity." ::= { ciscoEntityExtMIBCompliances 3 } ciscoEntityExtMIBComplianceRev3 MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance for SNMP Entities which support modules with CPU, NVRAM and configuration register." MODULE -- this module MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } GROUP ciscoEntityExtConfigRegGroup DESCRIPTION "The ciscoEntityExtConfigRegGroup is an optional group containing objects providing information about configuration register." GROUP ceExtSysBootImageListGroup DESCRIPTION "This group is an optional group containing an object which provides information about the system boot images." GROUP ciscoEntityExtLEDGroup DESCRIPTION "This group is an optional group containing an object which provides LED information." GROUP ceExtSysBootImageListGroupRev1 DESCRIPTION "This group is an optional group containing an object which provides information about the system boot images." GROUP ciscoExtEntityPhysicalGroup DESCRIPTION "This group is an optional group containing an object which provides additional information about the physical entity." GROUP ceExtPhyProcessorOverflowGroup DESCRIPTION "This group is an optional group for the physical entities which support 32-bit operating system." GROUP ceExtPhyProcessorHCGroup DESCRIPTION "This group is an optional group for the physical entities which support 32-bit operating system." ::= { ciscoEntityExtMIBCompliances 4 } -- units of conformance ceExtPhysicalProcessorGroup OBJECT-GROUP OBJECTS { ceExtProcessorRam, ceExtNVRAMSize, ceExtNVRAMUsed } STATUS current DESCRIPTION "The collection of objects which give information about the Processor RAM and NVRAM." ::= { ciscoEntityExtMIBGroups 1 } ciscoEntityExtConfigRegGroup OBJECT-GROUP OBJECTS { ceExtConfigRegister, ceExtConfigRegNext } STATUS current DESCRIPTION "The collection of objects which give information about configuration register. Implementation of this group is optional." ::= { ciscoEntityExtMIBGroups 2 } ceExtSysBootImageListGroup OBJECT-GROUP OBJECTS { ceExtSysBootImageList } STATUS current DESCRIPTION "A group containing an object providing information about the system boot images. Implementation of this group is optional." ::= { ciscoEntityExtMIBGroups 3 } ciscoEntityExtLEDGroup OBJECT-GROUP OBJECTS { ceExtEntityLEDColor } STATUS current DESCRIPTION "A collection of objects for giving led information." ::= { ciscoEntityExtMIBGroups 4 } ceExtSysBootImageListGroupRev1 OBJECT-GROUP OBJECTS { ceExtKickstartImageList } STATUS current DESCRIPTION "A group containing an object providing information about the system boot images. Implementation of this group is optional." ::= { ciscoEntityExtMIBGroups 5 } ciscoExtEntityPhysicalGroup OBJECT-GROUP OBJECTS { ceEntPhysicalSecondSerialNum } STATUS current DESCRIPTION "The collection of objects for providing additional information about the physical entity. Implementation of this group is optional." ::= { ciscoEntityExtMIBGroups 6 } ceExtPhyProcessorOverflowGroup OBJECT-GROUP OBJECTS { ceExtProcessorRamOverflow } STATUS current DESCRIPTION "The collection of Overflow (upper 32-bit) objects which provides information about physical processor, when the entity runs on 64-bit Operating System (OS). This group is optional for the entities which run on 32-bit OS." ::= { ciscoEntityExtMIBGroups 7 } ceExtPhyProcessorHCGroup OBJECT-GROUP OBJECTS { ceExtHCProcessorRam } STATUS current DESCRIPTION "The collection of High Capacity (HC) objects which provides information about physical processor, when the entity runs on 64-bit Operating System (OS). This group is optional for the entities which run on 32-bit OS." ::= { ciscoEntityExtMIBGroups 8 } END