-- ***************************************************************** -- CISCO-DS0BUNDLE-MIB definition -- -- Vasmi Abidi, July 1998 -- -- Copyright (c) 1998 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- -- This mib was extracted from draft-ietf-trunkmib-ds0-mib-06.txt CISCO-DS0BUNDLE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, TestAndIncr FROM SNMPv2-TC ciscoExperiment FROM CISCO-SMI InterfaceIndex FROM IF-MIB; ds0Bundle MODULE-IDENTITY LAST-UPDATED "9805242010Z" -- from the ietf draft ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "The MIB module to describe DS0 Bundle interfaces objects. Note: This contains a subset of the MIB objects defined in DS0BUNDLE-MIB of draft-ietf-trunkmib-ds0-mib-06.txt, section 6; it does not include the DS0 Bonding group." ::= { ciscoExperiment 32 } dsx0BundleNextIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to assist the manager in selecting a value for dsx0BundleIndex. Because this object is of syntax TestAndIncr (see the SNMPv2-TC document, RFC1903) it can also be used to avoid race conditions with multiple managers trying to create rows in the table. If the result of the SET for dsx0BundleNextIndex is not success, this means the value has been changed from index (i.e. another manager used the value), so a new value is required. The algorithm is: done = false while done == false index = GET (dsx0BundleNextIndex.0) SET (dsx0BundleNextIndex.0=index) if (set failed) done = false else SET(dsx0BundleRowStatus.index=createAndGo) if (set failed) done = false else done = true other error handling" ::= { ds0Bundle 2 } dsx0BundleTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx0BundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row in this table for each ds0Bundle in the system. This table can be used to (indirectly) create rows in the ifTable with ifType = 'ds0Bundle(82)'." ::= { ds0Bundle 3 } dsx0BundleEntry OBJECT-TYPE SYNTAX Dsx0BundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is a row in this table for each ds0Bundle interface." INDEX { dsx0BundleIndex } ::= { dsx0BundleTable 1 } Dsx0BundleEntry ::= SEQUENCE { dsx0BundleIndex INTEGER, dsx0BundleIfIndex InterfaceIndex, dsx0BundleRowStatus RowStatus } dsx0BundleIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique identifier for a ds0Bundle. This is not the same value as ifIndex. This table is not indexed by ifIndex because the manager has to choose the index in a createable row and the agent must be allowed to select ifIndex values." ::= { dsx0BundleEntry 1 } dsx0BundleIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value the agent selected for the (new) ds0Bundle interface." ::= { dsx0BundleEntry 2 } dsx0BundleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create and delete rows in this table." ::= { dsx0BundleEntry 3 } -- conformance information ds0BundleConformance OBJECT IDENTIFIER ::= { ds0Bundle 4} ds0BundleGroups OBJECT IDENTIFIER ::= { ds0BundleConformance 1 } ds0BundleCompliances OBJECT IDENTIFIER ::= { ds0BundleConformance 2 } -- compliance statements ds0BundleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for DS0Bundle interfaces." MODULE -- this module MANDATORY-GROUPS { ds0BundleConfigGroup } ::= { ds0BundleCompliances 1 } ds0BundleConfigGroup OBJECT-GROUP OBJECTS { dsx0BundleNextIndex, dsx0BundleIfIndex, dsx0BundleRowStatus } STATUS current DESCRIPTION "A collection of objects providing the ability to create a new ds0Bundle in the ifTable." ::= { ds0BundleGroups 2 } END