-- ********************************************************************* -- CISCO-DM-MIB.my: Domain Manager Mib -- -- October 2002, Vinay Gaonkar -- -- Copyright (c) 2002, 2003 by cisco Systems, Inc. -- All rights reserved. -- -- ********************************************************************* CISCO-DM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Counter32, Integer32, Gauge32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ifIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI DomainId, DomainIdOrZero, FcNameId, FcNameIdOrZero, FcAddressId FROM CISCO-ST-TC vsanIndex, notifyVsanIndex FROM CISCO-VSAN-MIB cffFcFeElementName FROM CISCO-FC-FE-MIB; ciscoDmMIB MODULE-IDENTITY LAST-UPDATED "200309220000Z" ORGANIZATION "Cisco Systems Inc. " CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: cs-san@cisco.com" DESCRIPTION "The MIB module for the domain management functionality defined by the Fibre Channel standards (FC-SW2). For the purposes of this MIB, 'Domain Manager' is the software functionality which executes in both the principal switch and other switches." REVISION "200309220000Z" DESCRIPTION "Added a new table dmAllowedDomainIDListTable. Added a new compliance statement dmMIBCompliance2 which obseletes dmMIBCompliance1." REVISION "200306200000Z" DESCRIPTION "Changed the default values for dmEnable, dmFabricName and dmFcIdPersistencyNum." REVISION "200302270000Z" DESCRIPTION "Updated the copyright" REVISION "200302210000Z" DESCRIPTION "Fixed a problem with dmFcIdPersistencyGroup being both mandatory and conditional." REVISION "200301280000Z" DESCRIPTION "Changed the SYNTAX of dmFcIdPersistencyNum to INTEGER from Unsigned32." REVISION "200301020000Z" DESCRIPTION "Added objects dmFcIdPersistency and dmFcIdPurge to dmTable. Added a new table dmFcIdPersistencyTable. Added objects dmLocalPrincipalSwitchSelctns." REVISION "200210040000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 302 } ciscoDmMIBObjects OBJECT IDENTIFIER ::= { ciscoDmMIB 1 } dmMIBConformance OBJECT IDENTIFIER ::= { ciscoDmMIB 2 } dmConfiguration OBJECT IDENTIFIER ::= { ciscoDmMIBObjects 1 } dmInfo OBJECT IDENTIFIER ::= { ciscoDmMIBObjects 2 } dmNotificationPrefix OBJECT IDENTIFIER ::= { ciscoDmMIBObjects 3 } -- Textual Conventions DomainPriority ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Priority of the switch. The principal switch selection is influenced by the priority of the switch. Some values are of importance are: 1 : The highest priority in principal switch selection and is used by the user to establish which switch becomes the principal switch. 255 : Indicates that the switch is not capable of acting as a principal switch." SYNTAX Unsigned32 (1..255) DomainPriorityOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This is an extension of the DomainPriority. In addition to the DomainPriority range, this also includes 0 in its range of values. The value '0' means that the priority is not known. If the meaning is different from this, then it should mentioned in the description of the object using this textual convention." SYNTAX Integer32 (0..255) DomainInterfaceRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Role of the Domain Manager interface. nonPrincipal (1) - non-principal interface principalUpstream (2) - upstream principal interface principalDownsteam (3) - downstream principal interface isolated (4) - isolated interface down (5) - down interface unknown (6) - unknown interface " SYNTAX INTEGER { nonPrincipal (1), principalUpstream (2), principalDownsteam (3), isolated (4), down (5), unknown (6) } DmState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "State of the Domain Manager. starting(1)- unconfigured(2) - principalSwitchSelection(3) - principal switch - selection in progress. domainIdDistribution(4) - domain ID distribution - in progress. buildFabricPhase(5) - BuildFabric in - progress. reconfigureFabricPhase(6) - ReconfigureFabric in - progress. stable(7) - stable. stableWithNoEports(8) - stable with No present. stableWithDomainConfigured(9) - stable with domain - configured. noDomains(10) - no domain - configured/assigned. disabled(11) - domain manager disabled. suspended(12) - corresponding VSAN is - suspended. unknown(13) - unknown. " SYNTAX INTEGER { starting(1), unconfigured(2), principalSwitchSelection(3), domainIdDistribution(4), buildFabricPhase(5), reconfigureFabricPhase(6), stable(7), stableWithNoEports(8), stableWithDomainConfigured(9), noDomains(10), disabled(11), suspended(12), unknown(13) } -- -- dmTable -- dmTable OBJECT-TYPE SYNTAX SEQUENCE OF DmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Domain Manager related parameters which can be configured and monitored. There is one entry for each of the VSANs configured on this switch. An entry will be created whenever a VSAN is created on the switch. The entry will be removed when the corresponding VSAN is deleted." ::= { dmConfiguration 1 } dmEntry OBJECT-TYPE SYNTAX DmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provides information on the domain manager for a VSAN." INDEX { vsanIndex } ::= { dmTable 1 } DmEntry ::= SEQUENCE { dmConfigDomainId DomainIdOrZero, dmConfigDomainIdType INTEGER, dmEnable TruthValue, dmAutoReconfigure TruthValue, dmContiguousAllocation TruthValue, dmPriority DomainPriority, dmRestart INTEGER, dmFabricName FcNameIdOrZero, dmPrincipalSwitchWwn FcNameIdOrZero, dmLocalSwitchWwn FcNameIdOrZero, dmAssignedAreaIdList OCTET STRING, dmFcIdsGranted Counter32, dmFcIdsRecovered Counter32, dmFreeFcIds Gauge32, dmAssignedFcIds Gauge32, dmReservedFcIds Gauge32, dmRunningPriority DomainPriority, dmPrincSwRunningPriority DomainPriority, dmState DmState, dmPrincipalSwitchSelections Counter32, dmBuildFabrics Counter32, dmFabricReconfigures Counter32, dmDomainId DomainIdOrZero, dmLocalPrincipalSwitchSelctns Counter32, dmFcIdPersistency TruthValue, dmFcIdPurge INTEGER } dmConfigDomainId OBJECT-TYPE SYNTAX DomainIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "The configured Domain ID of the local switch on this VSAN or zero if no Domain ID has been configured. The meaning of this object depends on dmConfigDomainIdType object. If dmConfigDomainIdType is 'preferred', then domain ID configured is called 'preferred Domain ID'. The valid values are between 0 and 239. In a situation where this domain could not be assigned, any other domain ID would be acceptable. The value '0' means any domain ID. If dmConfigDomainIdType is 'static', then domain ID is called 'static Domain ID' and valid values are between 1 and 239. In a situation where this domain was non-zero but could not be assigned, no other domain ID would be acceptable. If the Domain Manager is enabled on the VSAN, then a RDI (Request Domain ID) will be sent requesting this Domain ID. If no Domain ID can be granted in the case of 'preferred' or if the configured 'static' domain ID cannot be not granted then, it is an error condition. When this error occurs, the E_ports on that VSAN will be isolated and user will be informed via 'dmDomainIdNotAssigned' notification. If the domain manager is not enabled, then the static Domain ID is assumed to be granted, if it has been configured (to a valid number). If either of the domain IDs are not configured with a non-zero value on this VSAN and if the domain manager is not enabled, then - switch will isolate all of its E_ports on this VSAN. - The user will be informed via a notification 'dmDomainIdNotAssigned'." DEFVAL { 0 } ::= { dmEntry 1 } dmConfigDomainIdType OBJECT-TYPE SYNTAX INTEGER { static (1), preferred(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of configured Domain ID." DEFVAL { preferred } ::= { dmEntry 2 } dmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the Domain Manager on this VSAN. If enabled on an active VSAN, the switch will participate in principal switch selection. If disabled, the switch will participate in neither the principal switch selection nor domain allocation. Thus, Domain ID needs to be configured statically." DEFVAL { true } ::= { dmEntry 3 } dmAutoReconfigure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines how the switch responds to certain error conditions. The condition that can cause these errors is merging of two disjoint fabrics that have overlapping Domain ID list. If value of this object is 'true', the switch will send a RCF (ReConfigureFabric) to rebuild the Fabric. If 'false' the switch will isolate the E_ports on which the errors happened." DEFVAL { false } ::= { dmEntry 4 } dmContiguousAllocation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Determines how the switch behaves when elected as the principal switch. If true, switch won't accept non-contiguous domain IDs in RDIs and will try to replace all the Domain IDs in the list with contiguous domain IDs if a RDI for a contiguous Domain ID can not be fulfilled. If false, then the switch acts normally in granting the Domain IDs even if they are not contiguous." ::= { dmEntry 5 } dmPriority OBJECT-TYPE SYNTAX DomainPriority MAX-ACCESS read-write STATUS current DESCRIPTION "Priority of the switch to be used in principal switch selection process." ::= { dmEntry 6 } dmRestart OBJECT-TYPE SYNTAX INTEGER { nonDisruptive(1), disruptive(2), noOp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object tells the Domain Manager to rebuild the Domain ID tree all over again. If this object is set to 'disruptive', then a RCF (ReConfigure Fabric) is generated in the VSAN in order for the fabric to recover from the errors. If this object is set to 'nonDisruptive', then a BF (Build Fabric) is generated in the VSAN. No action is taken if this object is set to 'noOp'. The value of the object when read is always 'noOp'." ::= { dmEntry 7 } dmFabricName OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "The WWN that is used for fabric logins on this VSAN. This object is used only if the value of dmEnable is false. If the value of dmEnable is true, then principal switch WWN is used. It is automatically set to the default value when set to zero-length value." DEFVAL {'20010005300028df'H} ::= { dmEntry 8 } dmPrincipalSwitchWwn OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The WWN of the Principal Switch on this VSAN, or zero-length string if the identity of the principal switch is unknown." DEFVAL { ''H } ::= { dmEntry 9 } dmLocalSwitchWwn OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The WWN of the local Switch on this VSAN." ::= { dmEntry 10 } dmAssignedAreaIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The list of Area IDs which have been assigned in this VSAN, formatted as an array of octets in ascending order. There could zero or more Area IDs assigned on this VSAN. Area ID is an 8-bit value. And therefore, each octet represents one Area ID. So, the list containing the area_IDs 23, 45, 235 and 56 would be formatted as the 4-octet string x'172d38eb'. Each of these area_IDs can be used as an index to the dmAreaTable to get the statistics on the area." ::= { dmEntry 11 } dmFcIdsGranted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FC IDs that are granted (for local use) by the Domain Manager on the local switch since the switch has been initialized. Note that all such FC IDs have the local switch's Domain ID." ::= { dmEntry 12 } dmFcIdsRecovered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FC IDs that are recovered by the Domain Manager on the local switch since the switch has been initialized. A recovered FC ID is one that is explicitly returned after previously being granted for local use." ::= { dmEntry 13 } dmFreeFcIds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FC IDs that are unassigned on this VSAN." ::= { dmEntry 14 } dmAssignedFcIds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FC IDs that are assigned on this VSAN." ::= { dmEntry 15 } dmReservedFcIds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FC IDs that are reserved on this VSAN." ::= { dmEntry 16 } dmRunningPriority OBJECT-TYPE SYNTAX DomainPriority MAX-ACCESS read-only STATUS current DESCRIPTION "The running priority of the local switch on this VSAN." ::= { dmEntry 17 } dmPrincSwRunningPriority OBJECT-TYPE SYNTAX DomainPriority MAX-ACCESS read-only STATUS current DESCRIPTION "The running priority of the principal switch on this VSAN." ::= { dmEntry 18 } dmState OBJECT-TYPE SYNTAX DmState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Domain Manager on the local switch on this VSAN." ::= { dmEntry 19 } dmPrincipalSwitchSelections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of principal switch selections on this VSAN." ::= { dmEntry 20 } dmBuildFabrics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'BuildFabrics' (BFs) that have occurred on this VSAN." ::= { dmEntry 21 } dmFabricReconfigures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 'ReconfigureFabrics' (RCFs) that have occurred on this VSAN." ::= { dmEntry 22 } dmDomainId OBJECT-TYPE SYNTAX DomainIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Domain ID of the local switch on this VSAN or zero if no Domain ID has been assigned." ::= { dmEntry 23 } dmLocalPrincipalSwitchSelctns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the local switch became the principal switch on this VSAN." ::= { dmEntry 24 } dmFcIdPersistency OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if the FC IDs assigned on this VSAN are persistent or not. If this object is set to 'true', then all the FC ID assigned on this VSAN are made persistent on this VSAN. If this object is set to 'false', then all the entries on VSAN in dmFcIdPersistencyTable are deleted. An entry (or entries) is (or are) automatically created in the dmFcIdPersistencyTable with dmFcIfPersistencyWwn equal to either WWN of the FC device (if the local port is a F_port) for which the FC ID was assigned or WWN of local port (if the local port is a FL_port) and dmFcIdPersistencyType equal to 'dynamic'. The FC ID persistency can be enabled on this VSAN only if all the following conditions are satisfied: - the VSAN is active. - if dmConfigDomainIdType is equal is 'static' and dmConfigDomainId is not equal to zero on this VSAN. - if the dmConfigDomainId is equal to dmDomainId on this VSAN. " DEFVAL { false } ::= { dmEntry 25 } dmFcIdPurge OBJECT-TYPE SYNTAX INTEGER { noOp (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object tells the Domain Manager to purge the FC IDs on this VSAN in the FC ID persistency database. If the value of this object is 'enable', then the FC IDs which are dynamic and not currently used are purged from the persistency database." ::= { dmEntry 26 } -- -- dmIfTable - Interface configuration -- dmIfTable OBJECT-TYPE SYNTAX SEQUENCE OF DmIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains interface configuration of the domain manager per VSAN. An entry in this table is automatically created when an E_port becomes non-isolated and there is a entry in dmTable for that VSAN. An entry is deleted automatically from this table if : a) the correponding interface becomes non-existent, or b) the correponding interface becomes a non-E_port and all the writable objects has default values. or c) the dmTable entry for the corresponding VSAN is deleted. Entries in this table can be created via dmIfRowStatus only as the means to specify non-default parameter values for an interface at a time when that interface is either down or is a non-E_port. So an entry in this table exists when one or both of these conditions holds: - one or more configuration parameters have non-default values for an interface which is either down or a non-E_port and corresponding VSAN has an entry in the dmTable, and/or - the interface is an E_port and it is up. This has a number of consequences: - an entry exists for a non-E_port or an E_port which is down whenever that interface has non-default parameters and the corresponding VSAN has an entry in the dmTable; - an entry cannot be created (via dmIfRowStatus) for an interface with default parameters; instead, the agent creates/deletes an entry for an interface with default parameters according to whether the E_port is up or down. - an entry can not be created via dmIfRowStatus unless non-default parameter values are (simultaneously) configured for an interface which is a non-E_port or a down interface, and the correspoding VSAN has an entry in the dmTable. - deleting an entry via RowStatus when either the interface is down and configured with non-default values or the interface is up, is equivalent to resetting its parameters to their default values. If the interface is down and was configured with default- values, then the entry would be deleted." ::= { dmConfiguration 2 } dmIfEntry OBJECT-TYPE SYNTAX DmIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry gives information on interface configuration on a particular VSAN." INDEX { vsanIndex, ifIndex} ::= { dmIfTable 1 } DmIfEntry ::= SEQUENCE { dmIfRcfReject TruthValue, dmIfRole DomainInterfaceRole, dmIfRowStatus RowStatus } dmIfRcfReject OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object determines if the incoming ReConfigure Fabric (RCF) messages on this interface on this vsan is accepted or not. If this object is 'true', then the incoming RCF is rejected. If 'false', incoming RCF is accepted. Note that this object does not apply to the outgoing RCFs generated by this interface." DEFVAL {false} ::= { dmIfEntry 1 } dmIfRole OBJECT-TYPE SYNTAX DomainInterfaceRole MAX-ACCESS read-only STATUS current DESCRIPTION "The role of this interface." ::= { dmIfEntry 2 } dmIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. This object can be used to create an entry only if the corresponding interface exists. If the interface does not exists, a create will fail." ::= { dmIfEntry 3 } -- -- dmAreaTable -- dmAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF DmAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains area statistics on this domain manager per VSAN. Each octet in the dmAssignedAreaList can be used to index this table to find information on each area." ::= { dmInfo 1 } dmAreaEntry OBJECT-TYPE SYNTAX DmAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry gives information on the Area ID and all Port IDs that were assigned for within an area for a particular VSAN." INDEX { vsanIndex, dmAreaAreaId} ::= { dmAreaTable 1 } DmAreaEntry ::= SEQUENCE { dmAreaAreaId Unsigned32, dmAreaAssignedPortIdList OCTET STRING } dmAreaAreaId OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Area ID of this area." ::= { dmAreaEntry 1 } dmAreaAssignedPortIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The list of Port IDs which have been assigned in this Area and VSAN, formatted as an array of octets in ascending order. There could be zero or more Port IDs assigned on this Area and VSAN. Port ID is an 8-bit value. And therefore, each octet represents one Port ID. So, the list containing the Port IDs 23, 45, 235 and 56 would be formatted as the 4-octet string x'172d38eb'." ::= { dmAreaEntry 2 } -- -- dmDatabaseTable -- . dmDatabaseTable OBJECT-TYPE SYNTAX SEQUENCE OF DmDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all information known by the local switch about all the domains which have been assigned in each of the VSANs." ::= { dmInfo 2 } dmDatabaseEntry OBJECT-TYPE SYNTAX DmDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the dmDatabaseTable containing information about one Domain ID in one VSAN." INDEX { vsanIndex , dmDatabaseDomainId} ::= { dmDatabaseTable 1 } DmDatabaseEntry ::= SEQUENCE { dmDatabaseDomainId DomainId, dmDatabaseSwitchWwn FcNameId } dmDatabaseDomainId OBJECT-TYPE SYNTAX DomainId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Domain ID for which this row contains information." ::= { dmDatabaseEntry 1 } dmDatabaseSwitchWwn OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS read-only STATUS current DESCRIPTION "The WWN of the switch to which the corresponding value of dmDatabaseDomainId is currently assigned for the particular VSAN." ::= { dmDatabaseEntry 2 } -- -- Domain Manager FC ID cache information -- dmMaxFcIdCacheSize OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of FC IDs that can be cached in the dmFcIdCacheTable." ::= { dmInfo 3 } -- -- dmFcIdCacheTable -- dmFcIdCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF DmFcIdCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all the FC IDs that have recently been released. So it lists all the FC IDs that have valid WWN to FC ID mappings and currently not assigned to any ports. These FC ID were assigned to ports and now, have been released. This cached FC ID contains only Area ID and Port ID information. The FC ID cache is kept to provide best effort re-assignment of same FC IDs. i.e, an Nx_port would get the same FC ID when it asks for a FC ID again, after releasing it." ::= { dmInfo 4 } dmFcIdCacheEntry OBJECT-TYPE SYNTAX DmFcIdCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the dmFcIdCacheTable containing information about one FC ID that was released from a WWN, corresponding to a range of one or more ports. An entry is created when a FC ID is released by the last port in the range. An entry is deleted either when the number of rows in this table reaches 'dmMaxFcIdCacheSize' if it is the oldest entry (depending on the value of the object 'dmFcIdCacheReleasedTime') to make room for the a new entry or when the this FC ID is assinged to a port." INDEX { vsanIndex, dmFcIdCacheWwn} ::= { dmFcIdCacheTable 1 } DmFcIdCacheEntry ::= SEQUENCE { dmFcIdCacheWwn FcNameId, dmFcIdCacheAreaIdPortId OCTET STRING, dmFcIdCachePortIds Unsigned32 } dmFcIdCacheWwn OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The WWN of the port associated this entry." ::= { dmFcIdCacheEntry 1 } dmFcIdCacheAreaIdPortId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Area ID and Port ID of FC ID that was assigned and has since been released by this port on this VSAN. Note that this object is only 2 bytes and only contains the Area ID and Port ID." ::= { dmFcIdCacheEntry 2 } dmFcIdCachePortIds OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of port IDs assigned and/or released starting from Port ID contained in the second byte of dmFcIdCacheAreaIdPortId for the Area ID contained in the first byte of object dmFcIdCacheAreaIdPortId." ::= { dmFcIdCacheEntry 3 } -- Notification control object. dmReConfFabricChangeNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether or not the local switch should issue a dmFabricChangeNotify notification on sending or receiving ReConfigureFabric (RCF) on a VSAN. If the value of the object is 'true, then the notification is generated. If the value is 'false', notification is not generated." DEFVAL { false } ::= { dmConfiguration 3 } -- -- FcID Persistency table -- dmFcIdPersistencyTable OBJECT-TYPE SYNTAX SEQUENCE OF DmFcIdPersistencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the FC IDs which are in the FC ID persistency database. The FC ID persistency is a feature which enables FC devices to get same FC IDs even if they disappear and appear back, if enabled. The FC ID persistency database contains information about the FC IDs which are assigned to FC devices either statically (configured) or dynamically. Entries are automatically created when a FC ID is assigned and dmFcIdPersistency is 'true' on this VSAN. The entries can also be created and deleted via the dmFcIdPersistencyRowStatus object. Entries are deleted when corresponding dmFcIdPersistencyType is 'dynamic' and dmFcIdPersistencyUsed is 'false' if the object dmFcIdPurge is set to 'enable'. An entry cannot be created if the dmFcIdPersistency is 'false'. If the dmDomainId is changed on a VSAN, then all the entries on that VSAN in this table are deleted. Also, if the dmConfigDomainId is not equal to dmDomainId on a VSAN, then all the entries in that VSAN are deleted. " ::= { dmConfiguration 4 } dmFcIdPersistencyEntry OBJECT-TYPE SYNTAX DmFcIdPersistencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provides information about a persistent FC ID." INDEX { vsanIndex, dmFcIdPersistencyWwn } ::= { dmFcIdPersistencyTable 1 } DmFcIdPersistencyEntry ::= SEQUENCE { dmFcIdPersistencyWwn FcNameId, dmFcIdPersistencyFcId FcAddressId, dmFcIdPersistencyNum INTEGER, dmFcIdPersistencyUsed TruthValue, dmFcIdPersistencyType INTEGER, dmFcIdPersistencyRowStatus RowStatus } dmFcIdPersistencyWwn OBJECT-TYPE SYNTAX FcNameId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is either the port WWN of the FC device if the local port is a F_port or WWN of the local port if the local port is a FL_port. The local port is the port on the local device to which the FC device is attached." ::= { dmFcIdPersistencyEntry 1 } dmFcIdPersistencyFcId OBJECT-TYPE SYNTAX FcAddressId MAX-ACCESS read-create STATUS current DESCRIPTION "The FC ID assigned for this WWN on this VSAN. The third octet of this object must be '0x00' if value of dmFcIdPersistencyNum is 'area'. This object cannot be changed if either the value of dmFcIdPersistencyUsed is 'true' or if the new value being set is already assigned on this VSAN." ::= { dmFcIdPersistencyEntry 2 } dmFcIdPersistencyNum OBJECT-TYPE SYNTAX INTEGER { one (1), area (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The number of FC IDs starting from 'dmFcIdPersistencyFcId' which are assigned either statically or dynamically for this WWN on this VSAN. The value 'one' means just one FC ID is assigned. The value 'area' means all the FC IDs in the area that is specified in the second octet of dmFcIdPersistencyFcId are assigned. Typically, 256 FC IDs are assigned for an area. This object cannot be changed if the value of dmFcIdPersistencyUsed is 'true'." REFERENCE "Refer to FC-SW-2 REV 5.4 Section 4.8 for information on FC addressing." DEFVAL { one } ::= { dmFcIdPersistencyEntry 3 } dmFcIdPersistencyUsed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if this FC ID is used or not." ::= { dmFcIdPersistencyEntry 4 } dmFcIdPersistencyType OBJECT-TYPE SYNTAX INTEGER { static (1), dynamic (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of persistency of this FC ID." DEFVAL { static } ::= { dmFcIdPersistencyEntry 5 } dmFcIdPersistencyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of this row. An entry cannot be created until following object is instantiated : - dmFcIdPersistencyFcId - dmFcIdPersistencyNum Note that an entry cannot be deleted if the corresponding dmFcIdPersistencyUsed is 'true'." ::= { dmFcIdPersistencyEntry 6 } -- -- IVR Domain List -- dmAllowedDomainIDListTable OBJECT-TYPE SYNTAX SEQUENCE OF DmAllowedDomainIDListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains list of allowed domain IDs in the local VSANs. So in a VSAN, domain IDs can be assigned only from the allowed list. All the domain IDs which are not allowed are reserved. Note that this is possible in a VSAN only if the local device is the principal switch in that VSAN." REFERENCE "For information on principal switch, refer to Fibre Channel SW-2 Rev 5.4 section 7.3 Principal switch selection." ::= { dmConfiguration 5 } dmAllowedDomainIDListEntry OBJECT-TYPE SYNTAX DmAllowedDomainIDListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in this table. Each entry represents an domain ID list allowed in a VSAN." INDEX { vsanIndex, dmAllowedDomainIDListId } ::= { dmAllowedDomainIDListTable 1 } DmAllowedDomainIDListEntry ::= SEQUENCE { dmAllowedDomainIDListId Unsigned32, dmAllowedDomainIDList OCTET STRING, dmAllowedDomainIDListUser SnmpAdminString } dmAllowedDomainIDListId OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the domain ID list." ::= { dmAllowedDomainIDListEntry 1 } dmAllowedDomainIDList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the lists of domains that are allowed. Each octet within the value of the object specifies a set of domains. The first octet specifies domains 0 through 7. Similarly, the second octet specifies domain 8 through 15. Within each octet, the most significant bit represents the lowest numbered domain and least significant bit represents the highest numbered domain. Thus each domain, is represented by a single bit within the value of this object. A domain is allowed in this VSAN if the corresponding bit has a value of '1'. If this object has a value which is less than 32 bytes long, then the domains which are not represented are not considered to be in the list. If this object is a zero-length string, then no domains are allowed in this VSAN." ::= { dmAllowedDomainIDListEntry 2 } dmAllowedDomainIDListUser OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the entity using this domain ID list on this vsan." ::= { dmAllowedDomainIDListEntry 3 } -- Notifications dmNotification OBJECT IDENTIFIER ::= { dmNotificationPrefix 0 } dmDomainIdNotAssignedNotify NOTIFICATION-TYPE OBJECTS { notifyVsanIndex , cffFcFeElementName} STATUS current DESCRIPTION "If a Domain ID is not configured or assigned on a VSAN, then the switch may isolate E_ports on that VSAN. The conditions are : - If the Domain Manager is enabled on the local switch and its request for a configured static Domain ID is rejected or no other Domain ID is assigned, then the E_ports are isolated. - If the domain manager is not enabled and if a static Domain ID is not configured on the VSAN, then the switch will isolate all of its E_ports on the VSAN. This notification contains the vsanIndex of the VSAN on which the condition happened." ::= { dmNotification 1 } dmNewPrincipalSwitchNotify NOTIFICATION-TYPE OBJECTS { notifyVsanIndex, cffFcFeElementName } STATUS current DESCRIPTION "This notification indicates that the sending switch has become the new Principal Switch on a VSAN. This notification is sent soon after its election as the new Principal Switch, i.e., upon expiration of a Principal Switch selection timer which is equal to twice Fabric Stability Timeout value (F_S_TOV). This notification contains the vsanIndex of the VSAN on which the switch became the Principal Switch and the WWN of the switch which became the Principal Switch." ::= { dmNotification 2 } dmFabricChangeNotify NOTIFICATION-TYPE OBJECTS { notifyVsanIndex } STATUS current DESCRIPTION "This notification is sent whenever a switch sends or receives a Build Fabric (BF) or a ReConfigure Fabric (RCF) message on a VSAN. A switch can receive or issue a BuildFabric (BF) or a ReConfigureFabric (RCF) message under following conditions: - A new link causes two disjoint fabrics in a VSAN to merge into one fabric. The sent/received message is BF if the Domain ID lists on the disjoint fabric does not overlap and it is RCF if they overlap. - An upsteam principal ISL which connects to Principal switch and other switches in a VSAN fails. BF is issued to see if there is an alternative path to the Principal Switch. If not paths exit, then an RCF is issued. - A switch asks for a different set of Domain IDs than the currently assigned list, the Principal switch would issue an RCF. The notification is not sent if a 'dmNewPrincipalSwitchNotify' notification is sent for the same transition. This notification contains the vsanIndex of the VSAN on which RCF was issued." ::= { dmNotification 3 } -- -- Conformance -- dmMIBCompliances OBJECT IDENTIFIER ::= { dmMIBConformance 1 } dmMIBGroups OBJECT IDENTIFIER ::= { dmMIBConformance 2 } dmMIBCompliance MODULE-COMPLIANCE STATUS deprecated -- superceded by -- dmMIBCompliance1 DESCRIPTION "The compliance statement for entities which implement the Domain Manager." MODULE MANDATORY-GROUPS { dmGroup, dmDatabaseGroup, dmAreaGroup, dmCacheGroup, dmNotificationGroup } OBJECT dmIfRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6) } MIN-ACCESS read-create DESCRIPTION "Only values 'createAndGo' 'destroy' and 'active' need to be supported." ::= { dmMIBCompliances 1 } dmMIBCompliance1 MODULE-COMPLIANCE STATUS deprecated -- superceded by -- dmMIBCompliance2 DESCRIPTION "The compliance statement for entities which implement the Domain Manager." MODULE MANDATORY-GROUPS { dmGroupRev1, dmDatabaseGroup, dmAreaGroup, dmCacheGroup, dmNotificationGroup } GROUP dmFcIdPersistencyGroup DESCRIPTION "This group is manadatory for systems which support FC ID persistency." OBJECT dmIfRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6) } MIN-ACCESS read-create DESCRIPTION "Only values 'createAndGo' 'destroy' and 'active' need to be supported." OBJECT dmFcIdPersistencyRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6) } MIN-ACCESS read-create DESCRIPTION "Only values 'createAndGo' 'destroy' and 'active' need to be supported." OBJECT dmFcIdPersistency MIN-ACCESS read-only DESCRIPTION "Only read-only access is needed for systems which does not support FC ID Persistency feature. If they do, read-create access is mandatory." OBJECT dmFcIdPurge MIN-ACCESS read-only DESCRIPTION "Only read-only access is needed for systems which does not support FC ID Persistency feature. If they do, read-create access is mandatory." ::= { dmMIBCompliances 2 } dmMIBCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Domain Manager." MODULE MANDATORY-GROUPS { dmGroupRev1, dmDatabaseGroup, dmAreaGroup, dmCacheGroup, dmNotificationGroup } GROUP dmFcIdPersistencyGroup DESCRIPTION "This group is manadatory for systems which support FC ID persistency." GROUP dmDomainIDAllowedGroup DESCRIPTION "This group is manadatory for systems which support domain ID list configuration." OBJECT dmIfRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6) } MIN-ACCESS read-create DESCRIPTION "Only values 'createAndGo' 'destroy' and 'active' need to be supported." OBJECT dmFcIdPersistencyRowStatus SYNTAX INTEGER { active (1), createAndGo (4), destroy (6) } MIN-ACCESS read-create DESCRIPTION "Only values 'createAndGo' 'destroy' and 'active' need to be supported." OBJECT dmFcIdPersistency MIN-ACCESS read-only DESCRIPTION "Only read-only access is needed for systems which does not support FC ID Persistency feature. If they do, read-create access is mandatory." OBJECT dmFcIdPurge MIN-ACCESS read-only DESCRIPTION "Only read-only access is needed for systems which does not support FC ID Persistency feature. If they do, read-create access is mandatory." ::= { dmMIBCompliances 3 } -- Units of Conformance dmGroup OBJECT-GROUP OBJECTS { dmConfigDomainId, dmConfigDomainIdType, dmEnable, dmAutoReconfigure, dmContiguousAllocation, dmPriority, dmRestart, dmFabricName, dmPrincipalSwitchWwn, dmLocalSwitchWwn, dmAssignedAreaIdList, dmFcIdsGranted, dmFcIdsRecovered, dmFreeFcIds, dmAssignedFcIds, dmReservedFcIds, dmRunningPriority, dmPrincSwRunningPriority, dmState, dmPrincipalSwitchSelections, dmBuildFabrics, dmFabricReconfigures, dmDomainId, dmReConfFabricChangeNotifyEnable, dmIfRcfReject, dmIfRole, dmIfRowStatus } STATUS deprecated DESCRIPTION "A collection of objects for displaying and configuring Domain Manager membership." ::= { dmMIBGroups 1 } dmDatabaseGroup OBJECT-GROUP OBJECTS { dmDatabaseSwitchWwn } STATUS current DESCRIPTION "A collection of objects for displaying the Domain database information." ::= { dmMIBGroups 2 } dmAreaGroup OBJECT-GROUP OBJECTS { dmAreaAssignedPortIdList } STATUS current DESCRIPTION "A collection of objects for displaying the Domain area information." ::= { dmMIBGroups 3 } dmCacheGroup OBJECT-GROUP OBJECTS { dmMaxFcIdCacheSize, dmFcIdCacheAreaIdPortId, dmFcIdCachePortIds } STATUS current DESCRIPTION "A collection of objects for displaying the Domain area information." ::= { dmMIBGroups 4 } dmNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { dmDomainIdNotAssignedNotify, dmNewPrincipalSwitchNotify, dmFabricChangeNotify } STATUS current DESCRIPTION "A collection of notifications for status monitoring and notification." ::= { dmMIBGroups 5 } dmGroupRev1 OBJECT-GROUP OBJECTS { dmConfigDomainId, dmConfigDomainIdType, dmEnable, dmAutoReconfigure, dmContiguousAllocation, dmPriority, dmRestart, dmFabricName, dmPrincipalSwitchWwn, dmLocalSwitchWwn, dmAssignedAreaIdList, dmFcIdsGranted, dmFcIdsRecovered, dmFreeFcIds, dmAssignedFcIds, dmReservedFcIds, dmRunningPriority, dmPrincSwRunningPriority, dmState, dmPrincipalSwitchSelections, dmBuildFabrics, dmFabricReconfigures, dmDomainId, dmLocalPrincipalSwitchSelctns, dmReConfFabricChangeNotifyEnable, dmIfRcfReject, dmIfRole, dmIfRowStatus } STATUS current DESCRIPTION "A collection of objects for displaying and configuring Domain Manager membership." ::= { dmMIBGroups 6 } dmFcIdPersistencyGroup OBJECT-GROUP OBJECTS { dmFcIdPersistency, dmFcIdPurge, dmFcIdPersistencyFcId, dmFcIdPersistencyNum, dmFcIdPersistencyUsed, dmFcIdPersistencyType, dmFcIdPersistencyRowStatus } STATUS current DESCRIPTION "A collection of objects to support FC ID persistency." ::= { dmMIBGroups 7 } dmDomainIDAllowedGroup OBJECT-GROUP OBJECTS { dmAllowedDomainIDList, dmAllowedDomainIDListUser } STATUS current DESCRIPTION "A collection of objects to support domain ID list feature." ::= { dmMIBGroups 8 } END