-- CISCO-DIAMETER-SG-MIB.my : This MIB describes the SNMP MIB objects -- that are supported in order to provide -- the ability to fetch/configure the -- Diameter Server Groups. -- -- July 2006, Subash T. Comerica -- -- Copyright (c) 2006, 2009 by cisco Systems, Inc. -- All rights reserved. CISCO-DIAMETER-SG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF StorageType, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ciscoExperiment FROM CISCO-SMI; -- [RFC2580] ciscoDiameterSGMIB MODULE-IDENTITY LAST-UPDATED "200609060000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-aaa@cisco.com" DESCRIPTION "The MIB module for Cisco's Diameter Server Group Entities. This MIB describes the SNMP MIB objects that are supported in order to provide the ability to fetch/configure the Diameter Server Groups." REVISION "200609060000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoExperiment 132 } -- Top-Level Components of this MIB. ciscoDiameterSGMIBNotifs OBJECT IDENTIFIER ::= { ciscoDiameterSGMIB 0 } ciscoDiameterSGMIBObjects OBJECT IDENTIFIER ::= { ciscoDiameterSGMIB 1 } ciscoDiameterSGMIBConform OBJECT IDENTIFIER ::= { ciscoDiameterSGMIB 2 } cdsgHostCfgs OBJECT IDENTIFIER ::= { ciscoDiameterSGMIBObjects 1 } cdsgServerGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CdsgServerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the Diameter server group information. Entries are added to this table via cdsgServerGroupRowStatus in accordance with the RowStatus convention." ::= { cdsgHostCfgs 1 } cdsgServerGroupEntry OBJECT-TYPE SYNTAX CdsgServerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry representing a Diameter server group entry." INDEX { cdsgServerGroupIndex } ::= { cdsgServerGroupTable 1 } CdsgServerGroupEntry ::= SEQUENCE { cdsgServerGroupIndex Unsigned32, cdsgServerGroupName SnmpAdminString, cdsgServerGroupStorageType StorageType, cdsgServerGroupRowStatus RowStatus } cdsgServerGroupIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each Diameter Server Group. An index that uniquely represents a Server Group. This index is assigned arbitrarily by the SNMP engine and is not saved over reloads." ::= { cdsgServerGroupEntry 1 } cdsgServerGroupName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The Server Group Name. It has to be unique and not an empty string." ::= { cdsgServerGroupEntry 2 } cdsgServerGroupStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. An agent implementing the table must allow adding cdsgServerGroupName into the table. None of the columnar objects is writable when the conceptual row is permanent." REFERENCE "Textual Conventions for SMIv2, Section 2." DEFVAL { nonVolatile } ::= { cdsgServerGroupEntry 3 } cdsgServerGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdsgServerGroupRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdsgServerGroupName has been set. cdsgServerGroupName may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdsgServerGroupRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdsgServerGroupRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdsgServerGroupRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). Upon reload, cdsgServerGroupIndex values may be changed." ::= { cdsgServerGroupEntry 4 } cdsgServerTable OBJECT-TYPE SYNTAX SEQUENCE OF CdsgServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing information regarding the server which are part of the Diameter server groups. Entries are added to this table via cdsgServerRowStatus in accordance with the RowStatus convention. " ::= { cdsgHostCfgs 2 } cdsgServerEntry OBJECT-TYPE SYNTAX CdsgServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry representing a Diameter server group." INDEX { cdsgServerGroupIndex, cdsgServerIndex } ::= { cdsgServerTable 1 } CdsgServerEntry ::= SEQUENCE { cdsgServerIndex Unsigned32, cdsgServerName SnmpAdminString, cdsgServerStorageType StorageType, cdsgServerRowStatus RowStatus } cdsgServerIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number uniquely identifying each Diameter Server. An index that uniquely represents a Server within a Server Group. This index is assigned arbitrarily by the SNMP engine and is not saved over reloads." ::= { cdsgServerEntry 1 } cdsgServerName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The Server Name. It has to be unique and not an empty string." ::= { cdsgServerEntry 2 } cdsgServerStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. An agent implementing the table must allow adding cdsgServerName into the table. None of the columnar objects is writable when the conceptual row is permanent." REFERENCE "Textual Conventions for SMIv2, Section 2." DEFVAL { nonVolatile } ::= { cdsgServerEntry 3 } cdsgServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). This table is an extended table to the cdsgServerGroupTable and so an entry here must have a corresponding parent entry in the cdsgServerGroupTable as well. This would map all such entries with the same cdsgServerEntry under one single cdsgServerGroupEntry i.e these servers are under the server group represented by the cdsgServerGroupEntry. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdsgServerRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdsgServerName has been set. cdsgServerName may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdsgServerRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdsgServerRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdsgServerRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). Upon reload, cdsgServerIndex values may be changed." ::= { cdsgServerEntry 4 } -- Conformance ciscoDiameterSGMIBCompliances OBJECT IDENTIFIER ::= { ciscoDiameterSGMIBConform 1 } ciscoDiameterSGMIBGroups OBJECT IDENTIFIER ::= { ciscoDiameterSGMIBConform 2 } -- Compliance Statements ciscoDiameterSGMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Diameter Server Group entities." MODULE -- this module MANDATORY-GROUPS { ciscoDiameterSGHostCfgGroup } ::= { ciscoDiameterSGMIBCompliances 1 } -- Units of Conformance ciscoDiameterSGHostCfgGroup OBJECT-GROUP OBJECTS { cdsgServerGroupName, cdsgServerGroupRowStatus, cdsgServerGroupStorageType, cdsgServerName, cdsgServerRowStatus, cdsgServerStorageType } STATUS current DESCRIPTION "A collection of objects providing configuration common to the server." ::= { ciscoDiameterSGMIBGroups 1 } END