-- ***************************************************************** -- CISCO-CONTEXT-MAPPING-MIB.my: Cisco Context Mapping MIB -- -- January 2005, Chinna Pellacuru. -- -- May 2008, Sheethal Gunjal. -- -- Copyright (c) 2004-2005, 2008 by cisco Systems Inc. -- All rights reserved. -- -- **************************************************************** CISCO-CONTEXT-MAPPING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB RowStatus, StorageType FROM SNMPv2-TC CiscoBridgeDomain FROM CISCO-TC ciscoMgmt FROM CISCO-SMI; ciscoContextMappingMIB MODULE-IDENTITY LAST-UPDATED "200811220000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple SNMP contexts. This typically occurs because the technology has evolved to have extra dimension(s), i.e., one or more extra data and/or identifier values which are different in the different contexts, but were not defined in INDEX clause(s) of the original MIB module. In such cases, network management applications need to know the specific data/identifier values in each context, and this MIB module provides mapping tables which contain that information. Within a network there can be multiple Virtual Private Networks (VPNs) configured using Virtual Routing and Forwarding Instances (VRFs). Within a VPN there can be multiple topologies when Multi-topology Routing (MTR) is used. Also, Interior Gateway Protocols (IGPs) can have multiple protocol instances running on the device. A network can have multiple broadcast domains configured using Bridge Domain Identifiers. With MTR routing, VRFs, and Bridge domains, a router now needs to support multiple instances of several existing MIB modules, and this can be achieved if the router's SNMP agent provides access to each instance of the same MIB module via a different SNMP context (see Section 3.1.1 of RFC 3411). For MTR routing, VRFs, and Bridge domains, a different SNMP context is needed depending on one or more of the following: the VRF, the topology-identifier, the routing protocol instance, and the bridge domain identifier. In other words, the router's management information can be accessed through multiple SNMP contexts where each such context represents a specific VRF, a specific topology-identifier, a specific routing protocol instance and/or a bridge domain identifier. This MIB module provides a mapping of each such SNMP context to the corresponding VRF, the corresponding topology, the corresponding routing protocol instance, and the corresponding bridge domain identifier. Some SNMP contexts are independent of VRFs, independent of a topology, independent of a routing protocol instance, or independent of a bridge domain and in such a case, the mapping is to the zero length string. With the Cisco package licensing strategy, the features available in the image are grouped into multiple packages and each packages can be managed to operate at different feature levels based on the available license. This MIB module provides option to associate an SNMP context to a feature package group. This will allow manageability of license MIB objects specific to a feature package group. As technology evolves more we may need additional identifiers to identify the context. Then we would need to add those additional identifiers into the mapping." REVISION "200811220000Z" DESCRIPTION "Added New Table cContextMappingLicenseGroupTable to provide SNMP Context support for license package groups. Added cContextMappingLicenseGroupDataGroup in OBJECT-GROUP Added cContextMappingMIBComplianceRev2 in MODULE-COMPLIANCE Updated the MIB description to indicate the use of the above additions" REVISION "200805300000Z" DESCRIPTION "Add cContextMappingBridgeInstanceTable. Added cContextMappingBridgeInstanceDataGroup. Deprecated cContextMappingMIBComplianceRev1 and added cContextMappingMIBComplianceRev2 compliance statement." REVISION "200802010000Z" DESCRIPTION "Added New Table cContextMappingBridgeDomainTable to provide SNMP context support to the Bridge Domain. Added cContextMappingBridgeDomainDataGroup in OBJECT-GROUP Added cContextMappingMIBComplianceRev1 in MODULE-COMPLIANCE" REVISION "200503170000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 468 } cContextMappingMIBObjects OBJECT IDENTIFIER ::= { ciscoContextMappingMIB 1 } cContextMappingMIBConformance OBJECT IDENTIFIER ::= { ciscoContextMappingMIB 2 } cContextMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF CContextMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on which cContextMappingVacmContextName is mapped to which VRF, topology, and routing protocol instance. This table is indexed by SNMP VACM context. Configuring a row in this table for an SNMP context does not require that the context be already defined, i.e., a row can be created in this table for a context before the corresponding row is created in RFC 3415's vacmContextTable. To create a row in this table, a manager must set cContextMappingRowStatus to either 'createAndGo' or 'createAndWait'. To delete a row in this table, a manager must set cContextMappingRowStatus to 'destroy'." ::= { cContextMappingMIBObjects 1 } cContextMappingEntry OBJECT-TYPE SYNTAX CContextMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information relating to a single mapping of cContextMappingVacmContextName to the corresponding VRF, the corresponding topology, and the corresponding routing protocol instance." INDEX { cContextMappingVacmContextName } ::= { cContextMappingTable 1 } CContextMappingEntry ::= SEQUENCE { cContextMappingVacmContextName SnmpAdminString, cContextMappingVrfName SnmpAdminString, cContextMappingTopologyName SnmpAdminString, cContextMappingProtoInstName SnmpAdminString, cContextMappingStorageType StorageType, cContextMappingRowStatus RowStatus } cContextMappingVacmContextName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vacmContextName given to the SNMP context. This is a human readable name identifying a particular SNMP VACM context at a particular SNMP entity. The empty contextName (zero length) represents the default context." ::= { cContextMappingEntry 1 } cContextMappingVrfName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of an instance of this object identifies the name given to the VRF to which the SNMP context is mapped to. This is typically a human-readable string. This is the same ASCII string used in the router's console interface to refer to this VRF. When the value of this object is the zero length string it indicates that the SNMP context is independent of any VRF." DEFVAL { ''H } ::= { cContextMappingEntry 2 } cContextMappingTopologyName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of an instance of this object identifies the name given to the topology to which the SNMP context is mapped to. This is typically a human-readable string. This is the same ASCII string used in the router's console interface to refer to this topology. When the value of this object is the zero length string it indicates that the SNMP context is independent of any topology." DEFVAL { ''H } ::= { cContextMappingEntry 3 } cContextMappingProtoInstName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of an instance of this object identifies the name given to the protocol instance to which the SNMP context is mapped to. This is typically a human-readable string. This is the same ASCII string used in the router's console interface to refer to this protocol instance. When the value of this object is the zero length string it indicates that the SNMP context is independent of any protocol instance." DEFVAL { ''H } ::= { cContextMappingEntry 4 } cContextMappingStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { cContextMappingEntry 5 } cContextMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object facilitates the creation, modification, or deletion of a conceptual row in this table." ::= { cContextMappingEntry 6 } cContextMappingBridgeDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF CContextMappingBridgeDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on which cContextMappingVacmContextName is mapped to which bridge domain. A Bridge Domain is one of the means by which it is possible to define an Ethernet broadcast domain on a bridging device. A network can have multiple broadcast domains configured. This table helps the network management personnel to find out the details of various broadcast domains configured in the network. An entry need to exist in cContextMappingTable, to create an entry in this table." ::= { cContextMappingMIBObjects 2 } cContextMappingBridgeDomainEntry OBJECT-TYPE SYNTAX CContextMappingBridgeDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information relating to a single mapping of cContextMappingVacmContextName to the corresponding bridge domain. To create a row in this table, a manager must set cContextMappingBridgeDomainRowStatus to either 'createAndGo' or 'createAndWait'. To delete a row in this table, a manager must set cContextMappingBridgeDomainRowStatus to 'destroy'." INDEX { cContextMappingVacmContextName } ::= { cContextMappingBridgeDomainTable 1 } CContextMappingBridgeDomainEntry ::= SEQUENCE { cContextMappingBridgeDomainIdentifier CiscoBridgeDomain, cContextMappingBridgeDomainStorageType StorageType, cContextMappingBridgeDomainRowStatus RowStatus } cContextMappingBridgeDomainIdentifier OBJECT-TYPE SYNTAX CiscoBridgeDomain MAX-ACCESS read-create STATUS current DESCRIPTION "The value of an instance of this object identifies the bridge domain to which the SNMP context is mapped to." REFERENCE "CISCO-BRIDGE-DOMAIN-MIB" ::= { cContextMappingBridgeDomainEntry 1 } cContextMappingBridgeDomainStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { cContextMappingBridgeDomainEntry 2 } cContextMappingBridgeDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object facilitates the creation, modification, or deletion of a conceptual row in this table." ::= { cContextMappingBridgeDomainEntry 3 } cContextMappingBridgeInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF CContextMappingBridgeInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on mapping between cContextMappingVacmContextName and bridge instance. Bridge instance is an instance of a physical or logical bridge which has unique bridge-id. If an entry is deleted from cContextMappingTable, the corresponding entry in this table will also get deleted. If an entry needs to be created in this table, the corresponding entry must exist in cContextMappingTable." REFERENCE "BRIDGE-MIB" ::= { cContextMappingMIBObjects 3 } cContextMappingBridgeInstanceEntry OBJECT-TYPE SYNTAX CContextMappingBridgeInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information relating to a single mapping of cContextMappingVacmContextName to the corresponding bridge instance. To create a row in this table, a manager must set cContextMappingBridgeInstRowStatus to either 'createAndGo' or 'createAndWait'. To delete a row in this table, a manager must set cContextMappingBridgeInstRowStatus to 'destroy'." INDEX { cContextMappingVacmContextName } ::= { cContextMappingBridgeInstanceTable 1 } CContextMappingBridgeInstanceEntry ::= SEQUENCE { cContextMappingBridgeInstName SnmpAdminString, cContextMappingBridgeInstStorageType StorageType, cContextMappingBridgeInstRowStatus RowStatus } cContextMappingBridgeInstName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The object identifies the name given to bridge instance to which the SNMP context is mapped to. Value of this object cannot be changed when the RowStatus object in the same row is 'active'. This is typically a human-readable string. This is the same ASCII string used in the router's console interface to refer to this bridge instance. When the value of this object is a zero length string, it indicates that the SNMP context is independent of any bridge instances." ::= { cContextMappingBridgeInstanceEntry 1 } cContextMappingBridgeInstStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Value of this object cannot be changed when the RowStatus object in the same row is 'active'. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { cContextMappingBridgeInstanceEntry 2 } cContextMappingBridgeInstRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object facilitates the creation, modification, or deletion of a conceptual row in this table." ::= { cContextMappingBridgeInstanceEntry 3 } cContextMappingLicenseGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CContextMappingLicenseGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information on which cContextMappingVacmContextName is mapped to which License Group. Group level licensing is used where each Technology Package is enabled via a License." ::= { cContextMappingMIBObjects 4 } cContextMappingLicenseGroupEntry OBJECT-TYPE SYNTAX CContextMappingLicenseGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information relating to a single mapping of CContextMappingVacmContextName to the corresponding License Group." INDEX { cContextMappingVacmContextName } ::= { cContextMappingLicenseGroupTable 1 } CContextMappingLicenseGroupEntry ::= SEQUENCE { cContextMappingLicenseGroupName SnmpAdminString, cContextMappingLicenseGroupStorageType StorageType, cContextMappingLicenseGroupRowStatus RowStatus } cContextMappingLicenseGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of an instance of this object identifies the name given to the Group to which the SNMP context is mapped. Feature sets from all groups will be combined to form universal image. User can configure multiple groups as needed. For example: In Next generation ISRs will use the universal image package level licensing model for its licensing need. Each group has the feature set needed for that specific technology. Feature sets from different groups are combined to form universal image and each feature set for a group can be enabled using a valid license key. There will be a base level ipbase package in which the router boots with out any license key. The following are the different Technology Groups. 1.crypto 2.data 3.ip 4.legacy 5.novpn-security 6.security 7.uc" ::= { cContextMappingLicenseGroupEntry 1 } cContextMappingLicenseGroupStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { cContextMappingLicenseGroupEntry 2 } cContextMappingLicenseGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object facilitates the creation, modification, or deletion of a conceptual row in this table." ::= { cContextMappingLicenseGroupEntry 3 } -- Conformance cContextMappingMIBCompliances OBJECT IDENTIFIER ::= { cContextMappingMIBConformance 1 } cContextMappingMIBGroups OBJECT IDENTIFIER ::= { cContextMappingMIBConformance 2 } -- Compliance cContextMappingMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO-CONTEXT-MAPPING-MIB." MODULE -- this module MANDATORY-GROUPS { cContextMappingDataGroup } OBJECT cContextMappingVrfName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingTopologyName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingProtoInstName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingTable is not required." ::= { cContextMappingMIBCompliances 1 } cContextMappingMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO-CONTEXT-MAPPING-MIB. This compliance statement is superceded by cContextMappingMIBComplianceRev2." MODULE -- this module MANDATORY-GROUPS { cContextMappingDataGroup, cContextMappingBridgeDomainDataGroup } OBJECT cContextMappingVrfName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingTopologyName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingProtoInstName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingTable is not required." OBJECT cContextMappingBridgeDomainIdentifier MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeDomainStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeDomainRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingTable is not required." ::= { cContextMappingMIBCompliances 2 } cContextMappingMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO-CONTEXT-MAPPING-MIB." MODULE -- this module MANDATORY-GROUPS { cContextMappingDataGroup, cContextMappingBridgeDomainDataGroup, cContextMappingBridgeInstanceDataGroup } OBJECT cContextMappingVrfName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingTopologyName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingProtoInstName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingTable is not required." OBJECT cContextMappingBridgeDomainIdentifier MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeDomainStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeDomainRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingBridgeDomainTable is not required." OBJECT cContextMappingBridgeInstName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeInstStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeInstRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingBridgeInstanceTable is not required." ::= { cContextMappingMIBCompliances 3 } cContextMappingMIBComplianceRev3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO-CONTEXT-MAPPING-MIB." MODULE -- this module MANDATORY-GROUPS { cContextMappingDataGroup, cContextMappingBridgeDomainDataGroup, cContextMappingBridgeInstanceDataGroup, cContextMappingLicenseGroupDataGroup } OBJECT cContextMappingVrfName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingTopologyName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingProtoInstName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingTable is not required." OBJECT cContextMappingBridgeDomainIdentifier MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeDomainStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeDomainRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingBridgeDomainTable is not required." OBJECT cContextMappingBridgeInstName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeInstStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingBridgeInstRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingBridgeInstanceTable is not required." OBJECT cContextMappingLicenseGroupName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingLicenseGroupStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cContextMappingLicenseGroupRowStatus MIN-ACCESS read-only DESCRIPTION "Create/delete/modify access to the cContextMappingTable is not required." ::= { cContextMappingMIBCompliances 4 } -- Units of Conformance cContextMappingDataGroup OBJECT-GROUP OBJECTS { cContextMappingVrfName, cContextMappingTopologyName, cContextMappingProtoInstName, cContextMappingStorageType, cContextMappingRowStatus } STATUS current DESCRIPTION "The collection of objects providing the context mapping data between the SNMP context to the corresponding VRF, the corresponding topology, and the corresponding routing protocol instance." ::= { cContextMappingMIBGroups 1 } cContextMappingBridgeDomainDataGroup OBJECT-GROUP OBJECTS { cContextMappingBridgeDomainIdentifier, cContextMappingBridgeDomainStorageType, cContextMappingBridgeDomainRowStatus } STATUS current DESCRIPTION "The collection of objects providing the context mapping data between the SNMP context to the corresponding bridge domain." ::= { cContextMappingMIBGroups 2 } cContextMappingBridgeInstanceDataGroup OBJECT-GROUP OBJECTS { cContextMappingBridgeInstName, cContextMappingBridgeInstStorageType, cContextMappingBridgeInstRowStatus } STATUS current DESCRIPTION "The collection of objects providing the context mapping data between the SNMP context to the corresponding bridge instance." ::= { cContextMappingMIBGroups 3 } cContextMappingLicenseGroupDataGroup OBJECT-GROUP OBJECTS { cContextMappingLicenseGroupName, cContextMappingLicenseGroupStorageType, cContextMappingLicenseGroupStorageType, cContextMappingLicenseGroupRowStatus } STATUS current DESCRIPTION "The collection of objects providing the context mapping data between the SNMP context to the corresponding LicenseGroupName." ::= { cContextMappingMIBGroups 4 } END