-- ***************************************************************** -- Cisco CallManager Express MIB -- -- May 2005, Shanmukh Rao -- -- Copyright (c) 2005, 2010 by cisco Systems Inc. -- All rights reserved. -- ***************************************************************** CISCO-CCME-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Gauge32, Unsigned32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TruthValue, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB ciscoMgmt FROM CISCO-SMI; ciscoCcmeMIB MODULE-IDENTITY LAST-UPDATED "201010130000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-ccme-srst@cisco.com" DESCRIPTION "This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enables Cisco routers to deliver Key System or Hybrid PBX functionality for enterprise branch offices or small businesses." REVISION "201010130000Z" DESCRIPTION "1. Added ccmeEphonePrimaryDn in ccmeEphoneConfTable. 2. Deprecated ciscoCcmeMIBComplianceRev1 and added ciscoCcmeMIBComplianceRev2 MODULE-COMPLIANCE. 3. Added ccmeActiveStatsGroupEM." REVISION "201004010000Z" DESCRIPTION "1. Add ccmeEphonePrimaryDn in ccmeEphoneConfTable. 2. Deprecated ciscoCcmeMIBCompliance and added ciscoCcmeMIBComplianceRev1 MODULE-COMPLIANCE. 3. Added ccmeConfigGroup1." REVISION "200505310000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 439 } -- CCME MIB Groups ciscoCcmeMIBNotifs OBJECT IDENTIFIER ::= { ciscoCcmeMIB 0 } ciscoCcmeMIBObjects OBJECT IDENTIFIER ::= { ciscoCcmeMIB 1 } ciscoCcmeMIBConform OBJECT IDENTIFIER ::= { ciscoCcmeMIB 2 } -- CCME MIB object groups ccmeConfig OBJECT IDENTIFIER ::= { ciscoCcmeMIBObjects 1 } ccmeActiveStats OBJECT IDENTIFIER ::= { ciscoCcmeMIBObjects 2 } ccmeHistoryStats OBJECT IDENTIFIER ::= { ciscoCcmeMIBObjects 3 } -- Textual Conventions CcmeDigitPatternString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A E.164 address string limited to the character set '0123456789*#.+ABCDT'. An address of length zero indicates that no address is specified." SYNTAX OCTET STRING (SIZE (0 | 32)) CcmeNightServiceCodeString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A code string limited to character set '0123456789*' This code begins with first character as * (asteric) and followed by at least one digit. Example - *9234 Users enters at an IP phone to disable or enable night service." SYNTAX OCTET STRING (SIZE (0 | 16)) -- CCME, Ephone and EphoneDN Configuration Group -- -- Displays the current running configuration of CCME on this -- gateway. Note: This MIB supports only the display. ccmeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Cisco CallManager Express feature is enabled on the device. 'true' means that the CCME feature is enabled on this device. 'false' means that the CCME feature is disabled." ::= { ccmeConfig 1 } ccmeVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The version of Cisco CallManager Express on the device." ::= { ccmeConfig 2 } ccmeIPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Address type of ccmeIPAddress. Only IPv4 and IPv6 addresses are expected." ::= { ccmeConfig 3 } ccmeIPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IP address through which the IP phones communicate with CCME. The type of this address is determined by the value of the ccmeSysIPAddressType object. This IP address is usually the IP address bound to the Ethernet port on the gateway to which the phones are connected." ::= { ccmeConfig 4 } ccmePortNumber OBJECT-TYPE SYNTAX InetPortNumber (2000..9999) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the TCP port number to use for Skinny Client Control Protocol (SCCP). This port also indicates through which IP phones communicate with this device." DEFVAL { 2000 } ::= { ccmeConfig 5 } ccmeMaxEphones OBJECT-TYPE SYNTAX Integer32 (0..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of IP phones allowed by the configuration for the Cisco CallManager Express on the device. Maximum permissible range is IOS version and platform dependent. A value of zero indicates no IP phones are permitted to register to this device." ::= { ccmeConfig 6 } ccmeMaxDirectoryNumber OBJECT-TYPE SYNTAX Integer32 (0..288) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of IP phones extensions (ephone-dns) or directory numbers supported by this device. Maximum permissible range is IOS version and platform dependent. A value of zero indicates no IP phones extensions could be created." ::= { ccmeConfig 7 } ccmeMaxConferences OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of simultaneous three-party conferences supported by the Cisco CallManager Express on the device. Range is IOS version and platform dependent. With CCME Version 3.1, the following are the maximum values for each platform - Cisco 1750, Cisco 1751, Cisco 2600, Cisco 3640 - 8 conferences. Cisco 3660, Cisco 3725, Cisco 3745 - 16 conferences. Default is half the maximum number of simultaneous three-party conferences for each platform. A value of zero indicates no three-party conferences allowed on this device." ::= { ccmeConfig 8 } ccmeMaxRedirect OBJECT-TYPE SYNTAX Integer32 (5..20) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the maximum number of times that a call can be redirected by call forwarding or transfer within this device." ::= { ccmeConfig 9 } ccmeScriptName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the session-level IVR application script in Tool Command Language (TCL) for all extensions (ephone-dns) in CCME system. By default no application script is selected for all extensions and the object length in this case will return a zero length string." ::= { ccmeConfig 10 } ccmeVoiceMailNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the E.164 phone number that is associated with a voice-mail (speed-dial) on this device. If voice-mail number is not configured, this object has a length of zero." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeConfig 11 } ccmeMwiRelay OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the device can relay message-waiting indication (MWI) notification to remote Cisco IP phones." ::= { ccmeConfig 12 } ccmeMwiExpires OBJECT-TYPE SYNTAX Integer32 (600..99999) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Expiration time in seconds, for the registration of the message-waiting indication (MWI) client or server. Range is 600 to 99999." DEFVAL { 86400 } ::= { ccmeConfig 13 } ccmeTransferSystem OBJECT-TYPE SYNTAX INTEGER { blind(1), localConsult(2), fullBlind(3), fullConsult(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the call transfer method for all configured Cisco IP phone extensions, that use the ITU-T H.450.2 standard. Call transfers that use the H.450.2 standard can be 'blind' or 'consultative'. A blind transfer is one in which the transferring extension connects the caller to a destination extension before ringback begins. A consultative transfer is one in which the transferring party either connects the caller to a ringing phone (ringback heard) or speaks with the third party before connecting the caller to the third party. blind - Calls are transferred without consultation using a single phone line and the Cisco proprietary method. localConsult - Calls are transferred with local consultation using the second phone line if available, or the calls fall back to blind for nonlocal consultation or transfer target. This mode is intended for use primarily in voice over Frame Relay networks. fullBlind - Calls are transferred without consultation using H.450.2 standard method. fullConsult - Calls are transferred using H.450.2 with consultation using the second phone line if available, or the calls fall back to fullBlind if the second line is unavailable." ::= { ccmeConfig 14 } ccmeTimeFormat OBJECT-TYPE SYNTAX INTEGER { twelve(1), twentyfour(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Time display format on Cisco IP phones in a Cisco CallManager Express system. twelve(1) - 12 hour clock. twentyfour(2) - 24 hour clock." ::= { ccmeConfig 15 } ccmeDateFormat OBJECT-TYPE SYNTAX INTEGER { mmddyy(1), ddmmyy(2), yymmdd(3), yyddmm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the date display format on Cisco IP phones in a Cisco CallManager Express system." DEFVAL { mmddyy } ::= { ccmeConfig 16 } ccmeUrlforServicesBtn OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the URL information for the 'Services' button on the Cisco IP phone display. The Cisco IP Phone 7940 and Cisco IP phone 7960 can support four URL's in association with the four programmable feature buttons on those IP phones - Directories, Information, Messages and Services. The fifth button, Settings, is managed entirely by the phone. Operation of these services is determined by the Cisco IP phone capabilities and the content of the referenced URL." ::= { ccmeConfig 17 } ccmeUrlforDirectoriesBtn OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the URL information for the 'Directories' button on the Cisco IP phone display. The Cisco IP Phone 7940 and Cisco IP phone 7960 can support four URL's in association with the four programmable feature buttons on those IP phones - Directories, Information, Messages and Services. The fifth button, Settings, is managed entirely by the phone. Operation of these services is determined by the Cisco IP phone capabilities and the content of the referenced URL." ::= { ccmeConfig 18 } ccmeMohFlashFile OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the audio file to use for the Music on hold (MOH) audio stream. Audio files that are used for MOH exist in the flash file system on the device. A MOH file can be .au or .wav file format. However, the file format must contain 8-bit 8-KHz data in a-law or mu-law. Maximum length of filename is 128 characters long. This object returns a zero length string if the MOH from flash is not configured on this router." ::= { ccmeConfig 19 } ccmeMohMulticastFromFlashEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether music-on-hold (MOH) multicast from flash file source is enabled or disabled on this router. If ccmeMohFlashFile is zero length this object has no relevance." ::= { ccmeConfig 20 } ccmeMohFlashMulticastIPAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Address type of ccmeMohFlashMulticastIPAddr. Only IPv4 and IPv6 addresses are expected." ::= { ccmeConfig 66 } ccmeMohFlashMulticastIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the destination IP address for multicast of the audio stream from Flash file, that is designated for MOH. If ccmeMohFlashFile is zero length this object has no relevance. Cisco IP phones don not support multicast at 224.x.x.x addresses." ::= { ccmeConfig 21 } ccmeMohFlashMulticastPortNum OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the media port for multicast of the audio stream from Flash file that is designated for MOH. This object has no relevance if ccmeMohMulticastFromFlash object is zero length." ::= { ccmeConfig 22 } ccmePhoneFirmwareTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmePhoneFirmwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of firmware load configured for each IP Phone on this device." ::= { ccmeConfig 23 } ccmePhoneFirmwareEntry OBJECT-TYPE SYNTAX CcmePhoneFirmwareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on an Cisco IP phone type and its configured firmware load. There is an entry in this table for each IP Phone type firmware that is configured on this device." INDEX { ccmePhoneFirmwareIndex } ::= { ccmePhoneFirmwareTable 1 } CcmePhoneFirmwareEntry ::= SEQUENCE { ccmePhoneFirmwareIndex Integer32, ccmePhoneType SnmpAdminString, ccmePhoneFirmwareRev SnmpAdminString } ccmePhoneFirmwareIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmePhoneFirmwareEntry." ::= { ccmePhoneFirmwareEntry 1 } ccmePhoneType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Type or model of Cisco IP phone. Cisco IP Phone types are 7902, 7905, 7910, 7912, 7914, 7920, 7935, 7936, 7940, 7960, ATA-186, ATA-188" ::= { ccmePhoneFirmwareEntry 2 } ccmePhoneFirmwareRev OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor-specific firmware revision string configured for the Cisco IP phone on this device." ::= { ccmePhoneFirmwareEntry 3 } ccmeTransferPatternTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeTransferPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of transfer patterns configured on this device." ::= { ccmeConfig 24 } ccmeTransferPatternEntry OBJECT-TYPE SYNTAX CcmeTransferPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a transfer pattern configured. There is an entry in this table for each transfer pattern that is configured on this device." INDEX { ccmeTransferPatternIndex } ::= { ccmeTransferPatternTable 1 } CcmeTransferPatternEntry ::= SEQUENCE { ccmeTransferPatternIndex Integer32, ccmeTransferPattern SnmpAdminString, ccmeTransferPatternType INTEGER } ccmeTransferPatternIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeTransferPatternEntry." ::= { ccmeTransferPatternEntry 1 } ccmeTransferPattern OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "String of digits for permitted call transfers." ::= { ccmeTransferPatternEntry 2 } ccmeTransferPatternType OBJECT-TYPE SYNTAX INTEGER { blind(1), h4502(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the pattern for call transfer. 'blind(1)' indicates blind transfer pattern. 'h4502(2)' indicates H.450.2 consultative call transfer." ::= { ccmeTransferPatternEntry 3 } ccmeWebGUIEditEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Cisco CallManager Express web-based Graphical User Interface (GUI) is allowed to add extensions (ephone-dns)." ::= { ccmeConfig 25 } ccmeWebGUITimeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates Cisco CallManager Express web-based Graphical User Interface (GUI) is allowed to change or set time on this device." ::= { ccmeConfig 26 } ccmeAfterHrsBlockPatternTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeAfterHrsBlockPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of after hour block patterns configured on this device." ::= { ccmeConfig 27 } ccmeAfterHrsBlockPatternEntry OBJECT-TYPE SYNTAX CcmeAfterHrsBlockPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a configured after hours block pattern. There is an entry in this table for each after hours block that is configured on this device." INDEX { ccmeAfterHrsBlockPatternTag } ::= { ccmeAfterHrsBlockPatternTable 1 } CcmeAfterHrsBlockPatternEntry ::= SEQUENCE { ccmeAfterHrsBlockPatternTag Integer32, ccmeAfterHrsBlockPattern CcmeDigitPatternString, ccmeAfterHrsBlockPatternAllTime TruthValue } ccmeAfterHrsBlockPatternTag OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique identifier tag configured for a pattern." ::= { ccmeAfterHrsBlockPatternEntry 1 } ccmeAfterHrsBlockPattern OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the configured string of outgoing call digits that will be matched for blocking call at specified after hours. Example - 9011" ::= { ccmeAfterHrsBlockPatternEntry 2 } ccmeAfterHrsBlockPatternAllTime OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether after hours block pattern is applicable all time. 'true' means ccmeAfterHrsBlockPattern pattern will always be applied, 7 days a week, 24 hours a day. 'false' means ccmeAfterHrsBlockPattern pattern will be blocked during the days and dates defined by ccmeAfterHrsBlockDateTable and ccmeAfterHrsBlockDayTable objects." ::= { ccmeAfterHrsBlockPatternEntry 3 } ccmeAfterHrsBlockDateTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeAfterHrsBlockDateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of recurring time period based on date during which outgoing calls that match defined block patterns are blocked on IP phones." ::= { ccmeConfig 28 } ccmeAfterHrsBlockDateEntry OBJECT-TYPE SYNTAX CcmeAfterHrsBlockDateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a configured after hour block pattern date. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once an after hour block configuration is removed from this device." INDEX { ccmeAfterHrsBlockDateIndex } ::= { ccmeAfterHrsBlockDateTable 1 } CcmeAfterHrsBlockDateEntry ::= SEQUENCE { ccmeAfterHrsBlockDateIndex Integer32, ccmeAfterHrsBlockDateMonth INTEGER, ccmeAfterHrsBlockDate Integer32, ccmeAfterHrsBlockDateStartHour Integer32, ccmeAfterHrsBlockDateStartMin Integer32, ccmeAfterHrsBlockDateStopHour Integer32, ccmeAfterHrsBlockDateStopMin Integer32 } ccmeAfterHrsBlockDateIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeAfterHrsBlockDateEntry." ::= { ccmeAfterHrsBlockDateEntry 1 } ccmeAfterHrsBlockDateMonth OBJECT-TYPE SYNTAX INTEGER { jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the month of the year during which the 'after hours block' service is active." ::= { ccmeAfterHrsBlockDateEntry 2 } ccmeAfterHrsBlockDate OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the day of the month during which the 'after hours block' service is activated." ::= { ccmeAfterHrsBlockDateEntry 3 } ccmeAfterHrsBlockDateStartHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the day during which the 'after hours block' service is activated." ::= { ccmeAfterHrsBlockDateEntry 4 } ccmeAfterHrsBlockDateStartMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeAfterHrsBlockDateStartHour from which the 'after hours block' service is activated." ::= { ccmeAfterHrsBlockDateEntry 5 } ccmeAfterHrsBlockDateStopHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the day during which during which the 'after hours block' service is deactivated." ::= { ccmeAfterHrsBlockDateEntry 6 } ccmeAfterHrsBlockDateStopMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeAfterHrsBlockDateStopHour after which the 'after hours block' service is deactivated." ::= { ccmeAfterHrsBlockDateEntry 7 } ccmeAfterHrsBlockDayTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeAfterHrsBlockDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of recurring time period based on day of week during which outgoing calls that match defined block patterns are blocked on IP phones." ::= { ccmeConfig 29 } ccmeAfterHrsBlockDayEntry OBJECT-TYPE SYNTAX CcmeAfterHrsBlockDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a configured after hour block pattern day. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once an 'after hour block' day configuration is removed from this device." INDEX { ccmeAfterHrsBlockDayIndex } ::= { ccmeAfterHrsBlockDayTable 1 } CcmeAfterHrsBlockDayEntry ::= SEQUENCE { ccmeAfterHrsBlockDayIndex Integer32, ccmeAfterHrsBlockDay INTEGER, ccmeAfterHrsBlockDayStartHour Integer32, ccmeAfterHrsBlockDayStartMin Integer32, ccmeAfterHrsBlockDayStopHour Integer32, ccmeAfterHrsBlockDayStopMin Integer32 } ccmeAfterHrsBlockDayIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeAfterHrsBlockDayEntry." ::= { ccmeAfterHrsBlockDayEntry 1 } ccmeAfterHrsBlockDay OBJECT-TYPE SYNTAX INTEGER { sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the day of the week during which the 'after hours block' service is active." ::= { ccmeAfterHrsBlockDayEntry 2 } ccmeAfterHrsBlockDayStartHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the day during which the 'after hours block' service is activated." ::= { ccmeAfterHrsBlockDayEntry 3 } ccmeAfterHrsBlockDayStartMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeAfterHrsBlockDayStartHour from which the 'after hours block' service is activated." ::= { ccmeAfterHrsBlockDayEntry 4 } ccmeAfterHrsBlockDayStopHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the day during which during which the 'after hours block' service is deactivated." ::= { ccmeAfterHrsBlockDayEntry 5 } ccmeAfterHrsBlockDayStopMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeAfterHrsBlockDayStopHour after which the 'after hours block' service is deactivated." ::= { ccmeAfterHrsBlockDayEntry 6 } ccmeNightServiceCode OBJECT-TYPE SYNTAX CcmeNightServiceCodeString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the configured night service code that disables or enables night service on IP phones. The code is the digit code that a user enters at an IP phone to disable or enable night service. The code begins with '*' (asterisk)." ::= { ccmeConfig 30 } ccmeNightServiceDateTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeNightServiceDateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of recurring time period based on date of month during which night service is active." ::= { ccmeConfig 31 } ccmeNightServiceDateEntry OBJECT-TYPE SYNTAX CcmeNightServiceDateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a configured night service date pattern. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once a night service configuration is removed from this device." INDEX { ccmeNightServiceDateIndex } ::= { ccmeNightServiceDateTable 1 } CcmeNightServiceDateEntry ::= SEQUENCE { ccmeNightServiceDateIndex Integer32, ccmeNightServiceDateMonth INTEGER, ccmeNightServiceDate Integer32, ccmeNightServiceDateStartHour Integer32, ccmeNightServiceDateStartMin Integer32, ccmeNightServiceDateStopHour Integer32, ccmeNightServiceDateStopMin Integer32 } ccmeNightServiceDateIndex OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeNightServiceDateEntry." ::= { ccmeNightServiceDateEntry 1 } ccmeNightServiceDateMonth OBJECT-TYPE SYNTAX INTEGER { jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the month of the year during which the night service is active." ::= { ccmeNightServiceDateEntry 2 } ccmeNightServiceDate OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the day of the month during which the night service is activated." ::= { ccmeNightServiceDateEntry 3 } ccmeNightServiceDateStartHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the date during which the night service is activated." ::= { ccmeNightServiceDateEntry 4 } ccmeNightServiceDateStartMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeNightServiceDateStartHour during which the night service is activated." ::= { ccmeNightServiceDateEntry 5 } ccmeNightServiceDateStopHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the date during which during which the night service is deactivated." ::= { ccmeNightServiceDateEntry 6 } ccmeNightServiceDateStopMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeNightServiceDateStopHour during which the night service is deactivated." ::= { ccmeNightServiceDateEntry 7 } ccmeNightServiceDayTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeNightServiceDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of recurring time period associated with a day of the week during which night service is active." ::= { ccmeConfig 32 } ccmeNightServiceDayEntry OBJECT-TYPE SYNTAX CcmeNightServiceDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a configured night service day pattern. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once a night service configuration is removed from this device." INDEX { ccmeNightServiceDayIndex } ::= { ccmeNightServiceDayTable 1 } CcmeNightServiceDayEntry ::= SEQUENCE { ccmeNightServiceDayIndex Integer32, ccmeNightServiceDay INTEGER, ccmeNightServiceDayStartHour Integer32, ccmeNightServiceDayStartMin Integer32, ccmeNightServiceDayStopHour Integer32, ccmeNightServiceDayStopMin Integer32 } ccmeNightServiceDayIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeNightServiceDayEntry." ::= { ccmeNightServiceDayEntry 1 } ccmeNightServiceDay OBJECT-TYPE SYNTAX INTEGER { sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the day of the week during which the night service is active." ::= { ccmeNightServiceDayEntry 2 } ccmeNightServiceDayStartHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the day during which the night service is activated." ::= { ccmeNightServiceDayEntry 3 } ccmeNightServiceDayStartMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeNightServiceDayStartHour during which the night service is activated." ::= { ccmeNightServiceDayEntry 4 } ccmeNightServiceDayStopHour OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hour of the day during which during which the night service is deactivated." ::= { ccmeNightServiceDayEntry 5 } ccmeNightServiceDayStopMin OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the minute in the ccmeNightServiceDayStopHour during which the night service is deactivated." ::= { ccmeNightServiceDayEntry 6 } ccmeFXOHookFlashEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Flash soft key display on IP Phone is enabled. Flash softkey is provided Cisco IP phones 7940 and 7960 users on Foreign Exchange Office (FXO) lines attached to the Cisco CallManager Express system. 'true' means Flash soft key display on IP Phones is enabled. 'false' means that the Flash soft key on IP phones is not displayed in a Cisco CallManager Express system." ::= { ccmeConfig 33 } ccmeSecondaryDialTonePrefix OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates secondary dial tone access prefix digit string. If secondary dial tone is not configured on this device, in such case the object returns a zero length string. Example - 9." ::= { ccmeConfig 34 } ccmeWebAdminSystemUser OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates login username for a Cisco CallManager Express system administrator." ::= { ccmeConfig 35 } ccmeWebAdminCustomerUser OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates login username for a Cisco CallManager Express customer administrator." ::= { ccmeConfig 36 } ccmeSystemMessage OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the configured text system message for display on idle Cisco IP phone 7940's and 7960's in a Cisco CallManager Express system. The text message is Alpha numeric string of up to 32 characters to disply when the phone is idle." ::= { ccmeConfig 37 } ccmeDialplanPatternTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeDialplanPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Dialplan patterns configured on this device." ::= { ccmeConfig 38 } ccmeDialplanPatternEntry OBJECT-TYPE SYNTAX CcmeDialplanPatternEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a dialplan pattern configured. There is an entry in this table for each Dialplan Pattern that is configured on this device." INDEX { ccmeDialplanPatternIndex } ::= { ccmeDialplanPatternTable 1 } CcmeDialplanPatternEntry ::= SEQUENCE { ccmeDialplanPatternIndex Integer32, ccmeDialplanPatternTag Integer32, ccmeDialplanExtLength Integer32, ccmeDialplanPattern CcmeDigitPatternString, ccmeDialplanExtPattern CcmeDigitPatternString, ccmeDialplanAllowRegiEnabled TruthValue } ccmeDialplanPatternIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this ccmeDialplanPatternTable." ::= { ccmeDialplanPatternEntry 1 } ccmeDialplanPatternTag OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number that identifies the dial-plan pattern." ::= { ccmeDialplanPatternEntry 2 } ccmeDialplanExtLength OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates length of digit extension for Dial plan pattern extension." ::= { ccmeDialplanPatternEntry 3 } ccmeDialplanPattern OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates string of digits forming a dial-plan pattern, such as the area code, the prefix, and the first one or two digits of the extension number, plus wild card markers or dots (.) for the remainder of the extension number digits. Example - 40854....." ::= { ccmeDialplanPatternEntry 4 } ccmeDialplanExtPattern OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates string of digits forming the extension number leading digit pattern that are used when the leading digits of the extension number are different from the E.164 telephone number leading digits defined by the ccmeDialplanPattern object." ::= { ccmeDialplanPatternEntry 5 } ccmeDialplanAllowRegiEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the E.164 number in the dial peer is allowed to register with the gatekeeper. 'true' means that the registration is allowed. 'false' means that the registration is disabled." ::= { ccmeDialplanPatternEntry 6 } ccmeKeepAliveTimeout OBJECT-TYPE SYNTAX Integer32 (10..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of time interval between successive keepalive messages from this device to IP phones." DEFVAL { 30 } ::= { ccmeConfig 39 } ccmeInterDigitTimeout OBJECT-TYPE SYNTAX Integer32 (2..120) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of time interval for interdigit timeout for Cisco IP phones." DEFVAL { 10 } ::= { ccmeConfig 40 } ccmeBusyTimeout OBJECT-TYPE SYNTAX Integer32 (0..30) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates amount of wait time after which the call is disconnected from a busy signal." DEFVAL { 10 } ::= { ccmeConfig 41 } ccmeAlertTimeout OBJECT-TYPE SYNTAX Integer32 (5..60000) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of time interval for which Cisco CallManager Express allows the IP phone to alert (ring) if a call is not answered." DEFVAL { 180 } ::= { ccmeConfig 42 } -- Ephone Configuration Table -- -- This table indicates configuration information about each -- configured IP phone (Ephone) on this device. ccmeEphoneConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEphoneConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IP phones (Ephones or EthernetPhones) configured on this device." ::= { ccmeConfig 43 } ccmeEphoneConfEntry OBJECT-TYPE SYNTAX CcmeEphoneConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a configured IP phone. There is an entry in this table for each IP Phone that is configured on this device. An entry is deleted in this table once an IP Phone configuration is removed from this device." INDEX { ccmeEphoneTag } ::= { ccmeEphoneConfTable 1 } CcmeEphoneConfEntry ::= SEQUENCE { ccmeEphoneTag Integer32, ccmeEphoneIpAddressType InetAddressType, ccmeEphoneIpAddress InetAddress, ccmeEphoneMacAddress MacAddress, ccmeEphoneModel SnmpAdminString, ccmeEphoneUsername SnmpAdminString, ccmeEphoneKeepAlive Integer32, ccmeEphoneAutoLineOut Integer32, ccmeEphonePagingDn Integer32, ccmeEphoneAddon Integer32, ccmeEphoneTemplate Integer32, ccmeEphonePagingPolicy INTEGER, ccmeEphoneKeyPhone TruthValue, ccmeEphoneAutoLineInEnabled TruthValue, ccmeEphoneAftHrsBlkExmptEnabled TruthValue, ccmeEphoneNightBellSvcEnabled TruthValue, ccmeEphoneKeepConfEnabled TruthValue, ccmeEphonePrimaryDn Unsigned32, ccmeEMUserProfileTag Unsigned32, ccmeEMLogOutProfileTag Unsigned32 } ccmeEphoneTag OBJECT-TYPE SYNTAX Integer32 (1..120) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An number that uniquely identifies a IP phone configured on the device. The maximum number of Ephone entries varies among Cisco IOS platforms and may be less than 120." ::= { ccmeEphoneConfEntry 1 } ccmeEphoneIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Address type of ccmeEphoneIpAddress. Only IPv4 and IPv6 addresses are expected." ::= { ccmeEphoneConfEntry 2 } ccmeEphoneIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the designated IP address to this Cisco IP phone (Ephone) configured on this device." ::= { ccmeEphoneConfEntry 3 } ccmeEphoneMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of a Cisco IP phone." ::= { ccmeEphoneConfEntry 4 } ccmeEphoneModel OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Type and model of Cisco IP phone." ::= { ccmeEphoneConfEntry 5 } ccmeEphoneUsername OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the username of the local Cisco IP phone user. Default is 'Admin'. The login account allows a phone user to access a web-based GUI to view information and change some personal settings for the phone user's own phone only. A login account is also required for users of Telephony Application Programming Interface (TAPI) aware PC applications, which can register with this device and exercise remote-control operations of Cisco IP phones." ::= { ccmeEphoneConfEntry 6 } ccmeEphoneKeepAlive OBJECT-TYPE SYNTAX Integer32 (10..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time interval between successive keepalive messages from this device to this particular IP phone. If the router fails to receive three successive keepalive messages, it considers the phone to be out of service until the phone re-registers." DEFVAL { 30 } ::= { ccmeEphoneConfEntry 7 } ccmeEphoneAutoLineOut OBJECT-TYPE SYNTAX Integer32 (0..34) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the line (Ephone-DN) that will be selected for out going calls when this Cisco IP phone goes off-hook." ::= { ccmeEphoneConfEntry 8 } ccmeEphonePagingDn OBJECT-TYPE SYNTAX Integer32 (1..208) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the audio paging DN group configured for this Cisco IP phone." ::= { ccmeEphoneConfEntry 9 } ccmeEphoneAddon OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of add on modules (Cisco IP phone 7914) that are attached to this phone." ::= { ccmeEphoneConfEntry 10 } ccmeEphoneTemplate OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Ephone template tag associated with this IP phone." ::= { ccmeEphoneConfEntry 11 } ccmeEphonePagingPolicy OBJECT-TYPE SYNTAX INTEGER { unicast(1), multicast(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates paging mechanism associated with this Cisco IP phone. unicast(1) - Indicates the Cisco IP phone is not capable of receiving audio paging through multicast and requests that all pages to this phone be sent through unicast. multicast(2) - Audio paging is transmitted to the Cisco IP phone using multicast." ::= { ccmeEphoneConfEntry 12 } ccmeEphoneKeyPhone OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the phone is marked as 'Key' IP phone. 'true' indicates IP phone is configured as Key IP phone. 'false' indicates IP phone is not configured as key IP phone." ::= { ccmeEphoneConfEntry 13 } ccmeEphoneAutoLineInEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates automatic line (Ephone-Dn) selection for incoming call is available. 'true' indicates automatic line selection for incoming calls is enabled. 'false' indicates auto-line selection for incoming calls on this Cisco IP phone is disabled." ::= { ccmeEphoneConfEntry 14 } ccmeEphoneAftHrsBlkExmptEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this Cisco IP phone is exempt from after-hours blocking. 'true' indicates this Cisco IP phone is exempt from after-hour blocking. 'false' indicates is this Cisco IP phone is included in after-hour blocking." ::= { ccmeEphoneConfEntry 15 } ccmeEphoneNightBellSvcEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates night-bell service is available on this Cisco IP Phone. 'true' indicates night-bell service is enabled for this IP phone. 'false' indicates night-bell service is disabled." ::= { ccmeEphoneConfEntry 16 } ccmeEphoneKeepConfEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the call would be disconnected when conference initiator hangs-up. 'true' - Indicates not to disconnect conference when conference initiator hangs-up. Connect remaining parties together directly using call transfer. 'false' - Disconnect conference when initiator hangs-up." ::= { ccmeEphoneConfEntry 17 } ccmeEphonePrimaryDn OBJECT-TYPE SYNTAX Unsigned32 (0..208) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the primary extension DN (Ephone-Dn) for this Cisco IP phone. Zero value indicates no primary extension DN is set for this IP phone" ::= { ccmeEphoneConfEntry 18 } ccmeEMUserProfileTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the user profile tag for this Cisco Extension Mobility IP phone. Zero value indicates no user logs into this phone." ::= { ccmeEphoneConfEntry 19 } ccmeEMLogOutProfileTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the logout profile tag configured for this Cisco Extension Mobility IP phone. Zero value indicates this phone is not an Extension Mobility phone." ::= { ccmeEphoneConfEntry 20 } -- Ephone Speed-dial configuration Table ccmeEphoneSpeedDialConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEphoneSpeedDialConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about configured speed dial entries for all IP phones." ::= { ccmeConfig 44 } ccmeEphoneSpeedDialConfEntry OBJECT-TYPE SYNTAX CcmeEphoneSpeedDialConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all configured speed dial entries for an IP phone. There is an entry created for each Speed Dial configured on this device. An entry is deleted from this table when the speed dial configuration is removed." INDEX { ccmeEphoneTag, ccmeEphoneSpeedDialTableIndex } ::= { ccmeEphoneSpeedDialConfTable 1 } CcmeEphoneSpeedDialConfEntry ::= SEQUENCE { ccmeEphoneSpeedDialTableIndex Integer32, ccmeEphoneSpeedDialTag Integer32, ccmeEphoneSpeedDialNumber CcmeDigitPatternString, ccmeEphoneSpeedDialLabel SnmpAdminString } ccmeEphoneSpeedDialTableIndex OBJECT-TYPE SYNTAX Integer32 (1..34) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeEphoneSpeedDialConfEntry." ::= { ccmeEphoneSpeedDialConfEntry 1 } ccmeEphoneSpeedDialTag OBJECT-TYPE SYNTAX Integer32 (1..34) MAX-ACCESS read-only STATUS current DESCRIPTION "An unique identifier tag configured for a speed-dial entry." ::= { ccmeEphoneSpeedDialConfEntry 2 } ccmeEphoneSpeedDialNumber OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the configured speed dial E.164 phone extension number that is associated with a line (ephone-dn) on this Cisco IP phone." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeEphoneSpeedDialConfEntry 3 } ccmeEphoneSpeedDialLabel OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..24)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the text to be displayed next to the speed-dial button on Cisco IP Phone." ::= { ccmeEphoneSpeedDialConfEntry 4 } -- Ephone Fast-dial configuration Table ccmeEphoneFastDialConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEphoneFastDialConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about configured fast dial entries for all IP phones." ::= { ccmeConfig 45 } ccmeEphoneFastDialConfEntry OBJECT-TYPE SYNTAX CcmeEphoneFastDialConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all configured fast dial entries for an IP phone. There is an entry created in this table for each Fast dial configured on this device. An entry is deleted from this table when Fast dial configuration is removed from this device." INDEX { ccmeEphoneTag, ccmeEphoneFastDialTableIndex } ::= { ccmeEphoneFastDialConfTable 1 } CcmeEphoneFastDialConfEntry ::= SEQUENCE { ccmeEphoneFastDialTableIndex Integer32, ccmeEphoneFastDialNumber CcmeDigitPatternString, ccmeEphoneFastDialName SnmpAdminString } ccmeEphoneFastDialTableIndex OBJECT-TYPE SYNTAX Integer32 (1..24) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeEphoneFastDialConfEntry." ::= { ccmeEphoneFastDialConfEntry 1 } ccmeEphoneFastDialNumber OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the configured fast dial E.164 phone extension number that is associated with this Cisco IP phone. No primary number is associated as a default." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeEphoneFastDialConfEntry 2 } ccmeEphoneFastDialName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the configured name associated with this fast dial E.164 phone extension number that is associated with this Cisco IP phone. When no name is associated, in that case this object will return a string length of zero." ::= { ccmeEphoneFastDialConfEntry 3 } -- Ephone button and DN association Configuration Table -- Note: This table shows the rouge phones, that are registered -- but not associated with any lines. ccmeEphoneBtnDNAssocConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEphoneBtnDNAssocConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all configured DN and button association for all IP phones." ::= { ccmeConfig 46 } ccmeEphoneBtnDNAssocConfEntry OBJECT-TYPE SYNTAX CcmeEphoneBtnDNAssocConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a configured DN and button association entries for an IP phone. There is an entry in this table for each DN and button association that is configured on this device. An entry is deleted once the configuration is deleted from this device." INDEX { ccmeEphoneTag, ccmeEphoneButtonNumber } ::= { ccmeEphoneBtnDNAssocConfTable 1 } CcmeEphoneBtnDNAssocConfEntry ::= SEQUENCE { ccmeEphoneButtonNumber Integer32, ccmeEphoneOverlayDN SnmpAdminString } ccmeEphoneButtonNumber OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The button number of an IP phone." ::= { ccmeEphoneBtnDNAssocConfEntry 1 } ccmeEphoneOverlayDN OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the overlay DN's configured for this button on this IP phone." ::= { ccmeEphoneBtnDNAssocConfEntry 2 } -- Ephone-dn Table -- -- This table indicates information about each configured line ccmeEphoneDnConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEphoneDnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of configured Ephone-DN's (Directory Number or extensions) for Cisco IP phone lines on this device." ::= { ccmeConfig 47 } ccmeEphoneDnConfigEntry OBJECT-TYPE SYNTAX CcmeEphoneDnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about each configured extension/DN. There is an entry in this table for each Ephone DN configured on this device. In SRST (Survivable Remote Site Telephone) mode, an entry is created for each Ephone-DN automatically generated. An entry is deleted from this table if the Ephone-DN is un-configured on this device." INDEX { ccmeEphoneDnTag } ::= { ccmeEphoneDnConfigTable 1 } CcmeEphoneDnConfigEntry ::= SEQUENCE { ccmeEphoneDnTag Integer32, ccmeEphoneDnType INTEGER, ccmeEphoneDnMode INTEGER, ccmeEphoneDnPriNum SnmpAdminString, ccmeEphoneDnSecNum SnmpAdminString, ccmeEphoneDnName SnmpAdminString, ccmeEphoneDnLabel SnmpAdminString, ccmeEphoneDnPriPref Integer32, ccmeEphoneDnSecPref Integer32, ccmeEphoneDnCFBusyNum SnmpAdminString, ccmeEphoneDnCFAllNum SnmpAdminString, ccmeEphoneDnCFNoAnNum SnmpAdminString, ccmeEphoneDnCFNoAnTo Integer32, ccmeEphoneDnMwiCapability INTEGER, ccmeEphoneDnHuntstop TruthValue, ccmeEphoneDnHuntstopCh TruthValue, ccmeEphoneDnHoldAltTo Integer32, ccmeEphoneDnHoldAltType INTEGER, ccmeEphoneDnMwiSipSubscrEnabled TruthValue, ccmeEphoneDnScriptName SnmpAdminString } ccmeEphoneDnTag OBJECT-TYPE SYNTAX Integer32 (1..288) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique sequence number that indicates an Cisco IP phone extension (ephone-dn) configured on this device." ::= { ccmeEphoneDnConfigEntry 1 } ccmeEphoneDnType OBJECT-TYPE SYNTAX INTEGER { extension(1), intercom(2), paging(3), moh(4), mwi(5), parkslot(6), loopback(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Extension type of the line. extension(1) - Cisco IP Phone line. intercom(2) - Part of pair of intercom line. paging(3) - type to receive audio pages. moh(4) - type to address MoH. mwi(5) - type to address MWI. parkslot(6) - type to address call park slot. loopback(7) - loopback directory number." ::= { ccmeEphoneDnConfigEntry 2 } ccmeEphoneDnMode OBJECT-TYPE SYNTAX INTEGER { single(1), dual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Mode of the line. single(1) - Single line mode. dual(2) - Dual line mode, that has one virtual voice port and two channels to handle two independent calls. This capacity allows call waiting, call transfer and conference functions within a single line (ephone-dn)." ::= { ccmeEphoneDnConfigEntry 3 } ccmeEphoneDnPriNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the primary E.164 phone extension number that is associated with a line (ephone-dn) on this device. No primary number is associated as a default." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeEphoneDnConfigEntry 4 } ccmeEphoneDnSecNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the second E.164 phone extension number that is associated with a line (ephone-dn) on this device." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeEphoneDnConfigEntry 5 } ccmeEphoneDnName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the name of the person associated with this extension (ephone-dn). If no specific name of person is associated with the IP phone, then this object will contain a zero-length string." ::= { ccmeEphoneDnConfigEntry 6 } ccmeEphoneDnLabel OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the text string that is displayed on the Cisco IP phone console instead of the extension phone number." ::= { ccmeEphoneDnConfigEntry 7 } ccmeEphoneDnPriPref OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the preference for the primary number associated with an extension. Range is from 0 to 10, where 0 is highest and 10 is lowest." ::= { ccmeEphoneDnConfigEntry 8 } ccmeEphoneDnSecPref OBJECT-TYPE SYNTAX Integer32 (0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the preference for the secondary number associated with an extension. Range is from 0 to 10, where 0 is highest and 10 is lowest." ::= { ccmeEphoneDnConfigEntry 9 } ccmeEphoneDnCFBusyNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the E.164 phone number to which calls are forwarded for all the incoming calls to busy extension. If no specific call forwarding phone number is associated with the IP phone, then this object will contain a zero-length string." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeEphoneDnConfigEntry 10 } ccmeEphoneDnCFAllNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the E.164 phone number to which calls are forwarded for all the incoming calls to an extension (ephone-dn). If no specific call forwarding all phone number is associated with the IP phone, then this object will contain a zero-length string." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeEphoneDnConfigEntry 11 } ccmeEphoneDnCFNoAnNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the E.164 phone number to which calls are forwarded for all the incoming calls to an extension (ephone-dn) that does not answer. If no specific call forwarding number when extension does not answer is associated, then this object will contain a zero-length string." REFERENCE "ITU-T E.164, Q.931 chapter 4.5.10" ::= { ccmeEphoneDnConfigEntry 12 } ccmeEphoneDnCFNoAnTo OBJECT-TYPE SYNTAX Integer32 (3..60000) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the duration that a call can ring with no answer before the call is forwarded to another extension/line/DN." ::= { ccmeEphoneDnConfigEntry 13 } ccmeEphoneDnMwiCapability OBJECT-TYPE SYNTAX INTEGER { mwiOn(1), mwiOff(2), mwiOnoff(3), mwiDisabled(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the capability of an extension (ephone-dn) to process message-waiting indication (MWI) notification from an external voice-messaging systems. mwiOn - Extension can process MWI ON notifications using either the main or secondary phone number. mwiOff - Extension can process MWI OFF notifications using either the main or secondary phone number. mwiOnOff - Extension can process both MWI ON and OFF notifications using either the main or secondary phone number. mwiDisabled - MWI notifications are disabled on an extension." ::= { ccmeEphoneDnConfigEntry 14 } ccmeEphoneDnHuntstop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the call hunting behavior for an extension (ephone-dn). If the value of this object is 'true', an incoming call does not roll over (hunt) to another ephone-dn if the called ephone-dn is busy or does not answer and a hunting strategy has been established that includes this ephone-dn." ::= { ccmeEphoneDnConfigEntry 15 } ccmeEphoneDnHuntstopCh OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the call hunting behavior for an extension (ephone-dn) channel. If this object is enabled on dual-line extensions, an incoming call does not roll over (hunt) to another channel if the first channel is busy or does not answer on this ephone-dn." ::= { ccmeEphoneDnConfigEntry 16 } ccmeEphoneDnHoldAltTo OBJECT-TYPE SYNTAX Integer32 (0..300) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates time out for repeating audible alert notification when a call is on hold on a Cisco IP phone. Range is 15 to 300. By default hold alert feature is disabled. In such case, this object will return a zero value." ::= { ccmeEphoneDnConfigEntry 17 } ccmeEphoneDnHoldAltType OBJECT-TYPE SYNTAX INTEGER { idle(1), originator(2), shared(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates when hold alert audible notification will be repeated on a Cisco IP phone. idle(1) - Alerts only when the Cisco IP phone is idle. originator(2) - Alerts when the Cisco IP phone is idle or busy. shared(3) - Alerts only when the Cisco IP phone is idle but alerts all phones that share the line." ::= { ccmeEphoneDnConfigEntry 18 } ccmeEphoneDnMwiSipSubscrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this extension (DN) in a Cisco CallManager Express system is subscribed to a SIP-based MWI server. 'true' indicates this extension can receive MWI from SIP-based MWI server. 'false' indicates extension is not subscribed to receive MWI." ::= { ccmeEphoneDnConfigEntry 19 } ccmeEphoneDnScriptName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the session-level IVR application script in Tool Command Language (TCL) for this extension (ephone-dn) in CCME system. By default no application script is selected for an extension and the object length in this case will return a string of zero length." ::= { ccmeEphoneDnConfigEntry 20 } -- Notification Configuration ccmeNotificationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates whether the system produces the Cisco CallManager Express notifications. When this variable is 'true', generation of CCME notifications are enabled. When this variable is 'false', generation of CCME notifications is disabled." DEFVAL { true } ::= { ccmeConfig 48 } ccmeSysTrapSeverity OBJECT-TYPE SYNTAX INTEGER { clear(1), minor(2), major(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The internally-defined severity of the particular alarm condition, associated with the most recent notification. A subsequent event in which the alarm condition changes from its failed state back to a 'normal' state has a severity of 'clear'." ::= { ccmeConfig 49 } ccmeSysNotificationReason OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The internally-defined failure cause of the particular alarm condition, associated with the most recent trap." ::= { ccmeConfig 50 } ccmeEphoneUnRegThreshold OBJECT-TYPE SYNTAX Integer32 (1..120) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable sets the threshold to limit the unregistration trap notification." ::= { ccmeConfig 51 } ccmeEphoneTrapReason OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The internally-defined failure cause of the particular alarm condition, associated with the most recent Ephone trap." ::= { ccmeConfig 52 } ccmeUserAutoLogoutTo OBJECT-TYPE SYNTAX Integer32 (1..120) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the length of time before the users of IP phones in a Cisco CallManager Express system are automatically logged out." ::= { ccmeConfig 53 } ccmeUserLoginDeactivateTime OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the specified time of day when user logins for all IP phones are deactivated." ::= { ccmeConfig 54 } ccmeMwiSipServerIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the designated IP address to an external SIP based message-waiting indication (MWI) server. The type of this address is determined by the value of the ccmeSysIPAddressType object." ::= { ccmeConfig 55 } ccmeMwiSipServerTransportType OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the transport layer protocol used to connect external SIP-based message-waiting indication (MWI) server. tcp(1) - TCP as transport layer protocol. udp(2) - UDP as transport layer protocol." ::= { ccmeConfig 56 } ccmeMwiSipServerPortNumber OBJECT-TYPE SYNTAX InetPortNumber (2000..9999) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port number for the message-waiting indication (MWI) server." DEFVAL { 5060 } ::= { ccmeConfig 57 } ccmeMwiSipServerRegE164Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether E.164 number is registered with SIP proxy or Registrar rather than an extension number. 'true' indicates E.164 is registered. 'false' indicates extension number is registered." ::= { ccmeConfig 58 } ccmeMwiSipSvrUnsolicitedEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether SIP NOTIFY for MWI is sent without a SUBSCRIBE from the Cisco CallManager Express. 'true' indicates SIP NOTIFY is sent without SIP SUBSCRIBE. 'false' indicates solicited NOTIFY is sent." ::= { ccmeConfig 59 } -- COR (Class of restriction) Configuration Table ccmeCorConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeCorConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Class of Restriction (COR) configured on this device." ::= { ccmeConfig 60 } ccmeCorConfEntry OBJECT-TYPE SYNTAX CcmeCorConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a Class of restriction (COR) configured entry. There is an entry for each COR configured on this device. An entry is deleted if the COR is removed from configuration." INDEX { ccmeCorTableIndex } ::= { ccmeCorConfTable 1 } CcmeCorConfEntry ::= SEQUENCE { ccmeCorTableIndex Unsigned32, ccmeCorTag Unsigned32, ccmeCorListName SnmpAdminString, ccmeCorScope INTEGER, ccmeCorDirection INTEGER, ccmeCorStartingNumber SnmpAdminString, ccmeCorEndingNumber SnmpAdminString, ccmeCorVoiceRegPoolNumber Unsigned32, ccmeCorListDefaultEnabled TruthValue } ccmeCorTableIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary and unique index for this CcmeCorConfEntry." ::= { ccmeCorConfEntry 1 } ccmeCorTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the tag number. If ccmeEnabled object is 'true' for Cisco CallManager Express Mode then this object indicates the ephone-dn tag under which the COR was configured. If csrstEnabled object is 'true' for Cisco Survivable Remote Site Telephony (SRST) mode, then this object indicates the COR list identifier configured under SRST configuration or Voice Registrar configuration." ::= { ccmeCorConfEntry 2 } ccmeCorListName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the COR list name configured on this device." ::= { ccmeCorConfEntry 3 } ccmeCorScope OBJECT-TYPE SYNTAX INTEGER { ccme(1), srstSccp(2), srstSip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the scope of this COR list for a list of associated dial-peers. ccme(1) - indicates this COR is applicable to the dial-peer associated with ciscoCorTag Ephone-DN object. srstSccp(2) - indicates this COR is applicable to all the dynamically created dial-peers under SCCP SRST mode. srstSip(3) - indicates this COR is applicable to all the SIP SRST dial-peers that belong to a specified voice registrar pool indicated by ciscoCorVoiceRegPoolNumber object." ::= { ccmeCorConfEntry 4 } ccmeCorDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the COR will be used by incoming or outgoing dial peers." ::= { ccmeCorConfEntry 5 } ccmeCorStartingNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the starting number of a range of directory numbers for a COR list configured on this device." ::= { ccmeCorConfEntry 6 } ccmeCorEndingNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ending number of a range of directory numbers for a COR list configured on this device." ::= { ccmeCorConfEntry 7 } ccmeCorVoiceRegPoolNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the voice registrar pool number under which this COR list is applied." ::= { ccmeCorConfEntry 8 } ccmeCorListDefaultEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the default COR list is enabled or disabled for this COR entry. 'true' indicates this COR list assumes behavior of a pre-defined default COR list. 'false' indicates default COR list is not applied." ::= { ccmeCorConfEntry 9 } -- Loopback DN Configuration Table ccmeLoopbackDnConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeLoopbackDnConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of loopback DN's (lines) configured on this device." ::= { ccmeConfig 61 } ccmeLoopbackDnConfEntry OBJECT-TYPE SYNTAX CcmeLoopbackDnConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a loopback DN configured on this device. There is an entry created for each loopback DN configured on this device. An entry is deleted if the loopback DN is removed from this device configuration." INDEX { ccmeLoopbackDnTag } ::= { ccmeLoopbackDnConfTable 1 } CcmeLoopbackDnConfEntry ::= SEQUENCE { ccmeLoopbackDnTag Unsigned32, ccmeLoopbackDnforward Unsigned32, ccmeLoopbackDnStrip Unsigned32, ccmeLoopbackDnPrefix SnmpAdminString, ccmeLoopbackDnSuffix SnmpAdminString, ccmeLoopbackDnRetryTo Integer32, ccmeLoopbackDnAutoCon TruthValue, ccmeLoopbackDnCodec INTEGER } ccmeLoopbackDnTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique sequence number that identifies the ephone-dn loopback pairs in this device." ::= { ccmeLoopbackDnConfEntry 1 } ccmeLoopbackDnforward OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of digits in the original called number that will be forwarded to the other phone-dn in the loopback-dn pair." ::= { ccmeLoopbackDnConfEntry 2 } ccmeLoopbackDnStrip OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of leading digits that will be stripped from the original called number that will be forwarded to the other phone-dn in the loopback-dn pair." ::= { ccmeLoopbackDnConfEntry 3 } ccmeLoopbackDnPrefix OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the string of digits that will be added in the front of the forwarded called number." ::= { ccmeLoopbackDnConfEntry 4 } ccmeLoopbackDnSuffix OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the string of digits that will be added in the end of the forwarded called number." ::= { ccmeLoopbackDnConfEntry 5 } ccmeLoopbackDnRetryTo OBJECT-TYPE SYNTAX Integer32 (0..32767) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of seconds to wait before retrying the loopback target when it is busy or unavailable. A zero-value indicates that retry is disabled and appropriate call-progress tones are passed to the call originator." ::= { ccmeLoopbackDnConfEntry 6 } ccmeLoopbackDnAutoCon OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the automatic connection capability for the call during far-end alert. 'true' indicates call is immediately connected and in-band alerting is provided while waiting for the far-end destination to answer. 'false' indicates automatic connection is disabled." ::= { ccmeLoopbackDnConfEntry 7 } ccmeLoopbackDnCodec OBJECT-TYPE SYNTAX INTEGER { g711alaw(1), g711ulaw(2), default(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The codec type applied to the calls that pass through the loopback-dn. g711alaw(1) - indicates the G.711 a-law is applied. g711ulaw(2) - indicates the G.711 mu-law is applied. Option 1 and 2 overrides the G.711 codec type that is negotiated for the call and provides mu-law to a-law conversion if needed. default(3) - indicates the Real-Time Transport Protocol (RTP) voice packets are passed through the loopback-dn without considering the G.711 coding type negotiated for the calls." ::= { ccmeLoopbackDnConfEntry 8 } -- Intercom DN Configuration Table ccmeIntercomDnConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeIntercomDnConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of intercom DN's (lines) configured on this device." ::= { ccmeConfig 62 } ccmeIntercomDnConfEntry OBJECT-TYPE SYNTAX CcmeIntercomDnConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a intercom DN configured on this device. There is an entry created for each intercom DN configured on this device. An entry is deleted if the intercom DN is removed from this device configuration." INDEX { ccmeIntercomDnTag } ::= { ccmeIntercomDnConfTable 1 } CcmeIntercomDnConfEntry ::= SEQUENCE { ccmeIntercomDnTag Unsigned32, ccmeIntercomDnExtensionNum SnmpAdminString, ccmeIntercomDnBargeInEnabled TruthValue, ccmeIntercomDnAutoAnsEnabled TruthValue, ccmeIntercomDnLabel SnmpAdminString } ccmeIntercomDnTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates Ephone-DN (line) tag number under which this Intercom was configured." ::= { ccmeIntercomDnConfEntry 1 } ccmeIntercomDnExtensionNum OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the telephone number to which intercom calls are placed." ::= { ccmeIntercomDnConfEntry 2 } ccmeIntercomDnBargeInEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the inbound intercom calls behavior when existing call is active. 'true' indicates inbound intercom calls force the existing call into call-hold state and allows the intercom call to be answered immediately. 'false' indicates inbound intercom calls don't barge-in the existing calls." ::= { ccmeIntercomDnConfEntry 3 } ccmeIntercomDnAutoAnsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the auto-answer feature is applied to this EPhone-DN. 'true' indicates auto-answer feature is enabled. 'false' indicates auto-answer feature is disabled. This indicates the Ephone-DN a connection that resembles a private line, automatic ringdown (PLAR)." ::= { ccmeIntercomDnConfEntry 4 } ccmeIntercomDnLabel OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the label for the intercom configured on this device." ::= { ccmeIntercomDnConfEntry 5 } ccmeMohMulticastIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Address type of ccmeMohMulticastIpAddress. Only IPv4 and IPv6 addresses are expected." ::= { ccmeConfig 67 } ccmeMohMulticastIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the destination IP address for multicast of the Music-on-hold audio stream. The type of this address is determined by the value of the ccmeSysIPAddressType object." ::= { ccmeConfig 63 } ccmeMohMulticastPortNumber OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the media port for multicast of the Music-oh-hold audio stream." ::= { ccmeConfig 64 } ccmeMohMulticastRoute OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates a string of IP addresses, each separate by other by a space, over which Music-oh-hold IP multicast packets are transmitted." ::= { ccmeConfig 65 } ccmeEMUserDirNumConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEMUserDirNumConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Directory Number or extensions configured under user profile which are downloaded to Cisco IP extension mobility phones when an user log into it using this user profile." ::= { ccmeConfig 68 } ccmeEMUserDirNumConfEntry OBJECT-TYPE SYNTAX CcmeEMUserDirNumConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about each directory number configured under user profile to be downloaded to an extension mobility IP phone when an user logs into it using this user profile. There is an entry in this table for each line on the logged in ephone." INDEX { ccmEMUserProfileDirNumIndex, ccmeEMUserDirNumTag } ::= { ccmeEMUserDirNumConfTable 1 } CcmeEMUserDirNumConfEntry ::= SEQUENCE { ccmEMUserProfileDirNumIndex Integer32, ccmeEMUserDirNumTag Integer32, ccmeEMUserDirNum CcmeDigitPatternString, ccmeEMUserDirNumOverlay SnmpAdminString } ccmEMUserProfileDirNumIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number that uniquely identifies an Extension Mobility user profile." ::= { ccmeEMUserDirNumConfEntry 1 } ccmeEMUserDirNumTag OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number that uniquely identifies a directory number entry." ::= { ccmeEMUserDirNumConfEntry 2 } ccmeEMUserDirNum OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the E.164 phone diretory or extension number which is downloaded to a line on the extension mobility phone when an user logs into it." ::= { ccmeEMUserDirNumConfEntry 3 } ccmeEMUserDirNumOverlay OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the overlay directory number configured for this line under this user profile." ::= { ccmeEMUserDirNumConfEntry 4 } ccmeEMLogoutDirNumConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEMLogoutDirNumConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Directory Number or extensions configured under logout profile which are downloaded to Cisco IP extension mobility phones when an user log out or no one is logged in." ::= { ccmeConfig 69 } ccmeEMLogoutDirNumConfEntry OBJECT-TYPE SYNTAX CcmeEMLogoutDirNumConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about each directory number configured under logout profile to be downloaded to an extension mobility IP phone at logout state. There is an entry in this table for each line on the ephone at logout state. There is an entry in this table for each logout profile." INDEX { ccmEMLogOutProfileDirNumIndex, ccmeEMLogoutDirNumTag } ::= { ccmeEMLogoutDirNumConfTable 1 } CcmeEMLogoutDirNumConfEntry ::= SEQUENCE { ccmEMLogOutProfileDirNumIndex Integer32, ccmeEMLogoutDirNumTag Integer32, ccmeEMLogoutDirNum CcmeDigitPatternString, ccmeEMLogoutDirNumOverlay SnmpAdminString } ccmEMLogOutProfileDirNumIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number that uniquely identifies an Extension Mobility logout profile." ::= { ccmeEMLogoutDirNumConfEntry 1 } ccmeEMLogoutDirNumTag OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number that uniquely identifies a directory number entry." ::= { ccmeEMLogoutDirNumConfEntry 2 } ccmeEMLogoutDirNum OBJECT-TYPE SYNTAX CcmeDigitPatternString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the E.164 phone diretory or extension number which is downloaded to a line on the extension mobility phone at the logout state." ::= { ccmeEMLogoutDirNumConfEntry 3 } ccmeEMLogoutDirNumOverlay OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the overlay directory number configured for this line under this logout profile." ::= { ccmeEMLogoutDirNumConfEntry 4 } -- ************************************************************** -- CCME, Ephone and EphoneDN Active status group -- ************************************************************** ccmeEphoneCallLegs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the active number of call legs contributed from the Cisco IP Phones and TAPI clients interacting with this device at this instance." ::= { ccmeActiveStats 1 } ccmeEphoneTot OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of Cisco IP phones (Ephones) seen by this device since the last reset." ::= { ccmeActiveStats 2 } ccmeEphoneTotRegistered OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of Cisco IP phones currently registered to this device." ::= { ccmeActiveStats 3 } ccmeEphoneTotKeyPhConfigured OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of configured Cisco IP phones that are marked as Key phones on this device." ::= { ccmeActiveStats 4 } ccmeEphoneTotKeyPhRegistered OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of Key Cisco IP phones currently registered to this device." ::= { ccmeActiveStats 5 } -- Active Ephone Table -- -- This table indicates active information about each -- IP phone seen by the device. ccmeEphoneActTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEphoneActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of all IP phones currently registered on this device." ::= { ccmeActiveStats 6 } ccmeEphoneActEntry OBJECT-TYPE SYNTAX CcmeEphoneActEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP phone seen by this device. There is an entry added for each new IP phone registration in this table. Entry is removed once the phone is deceased or re-registered." INDEX { ccmeEphoneTag } ::= { ccmeEphoneActTable 1 } CcmeEphoneActEntry ::= SEQUENCE { ccmeEphoneDeviceName SnmpAdminString, ccmeEphoneRegState INTEGER, ccmeEphoneActiveDN Integer32, ccmeEphoneActivityStatus INTEGER, ccmeEphoneKeepAliveCnt Counter32, ccmeEphonePendingReset TruthValue, ccmeEphoneRegTime SnmpAdminString, ccmeEphoneCurrentFirmwareRev SnmpAdminString, ccmeEphonePreviousFirmwareRev SnmpAdminString, ccmeEphoneLastError SnmpAdminString, ccmeEphoneObservedType SnmpAdminString, ccmeEphoneLoginStatus TruthValue, ccmeEphoneDnDStatus TruthValue, ccmeEphoneDebugStatus TruthValue, ccmeEphoneMediaActive TruthValue, ccmeEphoneTAPIClient TruthValue, ccmeEphoneMediaCapability INTEGER, ccmeEphoneRemote TruthValue } ccmeEphoneDeviceName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Type and model of Cisco IP phone as seen in the registration on this device." ::= { ccmeEphoneActEntry 1 } ccmeEphoneRegState OBJECT-TYPE SYNTAX INTEGER { registered(1), unregistered(2), deceased(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The registration state of the Cisco IP phone. registered(1) - indicates the phone is active. unregistered(2) - indicates the connection to Cisco IP phone was closed in normal manner. deceased(3) - indicates the connection to the Cisco IP phone was closed because of a keep-alive timeout." ::= { ccmeEphoneActEntry 2 } ccmeEphoneActiveDN OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS read-only STATUS current DESCRIPTION "Current active DN (line) on the IP phone." ::= { ccmeEphoneActEntry 3 } ccmeEphoneActivityStatus OBJECT-TYPE SYNTAX INTEGER { onhook(1), offhook(2), ringing(3), paging(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the Cisco IP phone as seen on this device. onhook(1) - Phone is on-hook. offhook(2) - Phone is off-hook. ringing(3) - Phone is ringing. paging(4) - Phone is receiving an audio page." ::= { ccmeEphoneActEntry 4 } ccmeEphoneKeepAliveCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of keepalive messages received from the Cisco IP phone by this device since the phone registered." ::= { ccmeEphoneActEntry 5 } ccmeEphonePendingReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Pending reset operation on this IP phone as seen by this device. True indicating reset is pending." ::= { ccmeEphoneActEntry 6 } ccmeEphoneRegTime OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Time this phone registered to this device." ::= { ccmeEphoneActEntry 7 } ccmeEphoneCurrentFirmwareRev OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The current vendor-specific firmware version string provided by the Cisco IP phone during registration on this device." ::= { ccmeEphoneActEntry 8 } ccmeEphonePreviousFirmwareRev OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The previous vendor-specific firmware version of Cisco IP phone provided by the Cisco IP phone during registration on this device." ::= { ccmeEphoneActEntry 9 } ccmeEphoneLastError OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Reason for last reset of the phone as seen by this device. Reason for last reset of phone could be 'TCP-timeout' or 'CallManager-closed-TCP' or 'Initialized'." ::= { ccmeEphoneActEntry 10 } ccmeEphoneObservedType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Type and model of Cisco IP phone received by this device during the registration of IP phone." ::= { ccmeEphoneActEntry 11 } ccmeEphoneLoginStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True indicates that a phone user is currently logged in on this phone. False indicates no phone user currently logged in on this phone." ::= { ccmeEphoneActEntry 12 } ccmeEphoneDnDStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True indicates that phone is set do-not-disturb (DnD) on one or more of the phone's extensions used by the Cisco IP phone. False indicates no DnD is set." ::= { ccmeEphoneActEntry 13 } ccmeEphoneDebugStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True indicates that phone is set in debug mode. False indicates no debug is disabled on this IP phone." ::= { ccmeEphoneActEntry 14 } ccmeEphoneMediaActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True indicates that phone is in active conversation. False indicates no conversation is ongoing." ::= { ccmeEphoneActEntry 15 } ccmeEphoneTAPIClient OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True indicates that phone is a TAPI client. False indicates the phone is not TAPI client." ::= { ccmeEphoneActEntry 16 } ccmeEphoneMediaCapability OBJECT-TYPE SYNTAX INTEGER { audioOnly(1), audioVideo(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the registered IP phone is capable of supporting audio or video. audioOnly(1) - IP phone is only audio capable. audioVideo(2) - IP phone is audio and video capable." ::= { ccmeEphoneActEntry 17 } ccmeEphoneRemote OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "True indicates that phone is suspected not to be on the local area network(LAN). This is derived from the ARP entry not seen on this device. False indicates the phone is in the same LAN as device." ::= { ccmeEphoneActEntry 18 } ccmeMohSource OBJECT-TYPE SYNTAX INTEGER { flash(1), liveFeed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Cisco CallManager Express system can derive music-on-hold (MOH) from two locations. If flash (1) is displayed, the router is currently picking MOH stream from an audio file configured in flash file system. The location of the file is provided by ccmeMohFlashFile object. If liveFeed (2) is displayed, the router is currently picking MOH stream from an incoming call audio stream. Normally, a single ephone-dn would be configured to accept liveFeed call. ccmeEphoneDnType with moh type will specify this DN." ::= { ccmeActiveStats 7 } ccmeNightServiceEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current Night service state. 'true' means that Night service is active. 'false' means that Night service is inactive." ::= { ccmeActiveStats 8 } ccmeEMphoneTot OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the total number of Cisco IP Extension Mobility phones (EMphones) seen by this device since the last reset." ::= { ccmeActiveStats 9 } ccmeEMphoneTotRegistered OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of Cisco IP Extension Mobility phones registered to this CCME." ::= { ccmeActiveStats 10 } -- ***************************************************************** -- CCME, Ephone and EphoneDN History group -- ***************************************************************** ccmeEphoneDnChStatsHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CcmeEphoneDnChStatsHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of statistics for all Ephone-DN's (lines) on this device." ::= { ccmeHistoryStats 1 } ccmeEphoneDnChStatsHistoryEntry OBJECT-TYPE SYNTAX CcmeEphoneDnChStatsHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistical information about an Ephone-DN. There is an entry added for each new Ephone-DN configured in this table. Entry is removed once the Ephone-DN is removed from this device configuration." INDEX { ccmeEphoneDnTag, ccmeEphoneDnChNum } ::= { ccmeEphoneDnChStatsHistoryTable 1 } CcmeEphoneDnChStatsHistoryEntry ::= SEQUENCE { ccmeEphoneDnChNum Integer32, ccmeEphoneDnChIncoming Counter32, ccmeEphoneDnChInAnswered Counter32, ccmeEphoneDnChOutbound Counter32, ccmeEphoneDnChOutAnswered Counter32, ccmeEphoneDnChOutBusy Counter32, ccmeEphoneDnChDiscAtConn Counter32, ccmeEphoneDnChDiscAtAlert Counter32, ccmeEphoneDnChDiscAtHold Counter32, ccmeEphoneDnChDiscAtRing Counter32, ccmeEphoneDnChDiscCauseNearEnd Integer32, ccmeEphoneDnChDiscCauseFarEnd Integer32 } ccmeEphoneDnChNum OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ephone-DN (line) channel number for this entry." ::= { ccmeEphoneDnChStatsHistoryEntry 1 } ccmeEphoneDnChIncoming OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of incoming calls received by this Ephone-DN (line) channel." ::= { ccmeEphoneDnChStatsHistoryEntry 2 } ccmeEphoneDnChInAnswered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of incoming calls answered by this Ephone-DN (line) channel." ::= { ccmeEphoneDnChStatsHistoryEntry 3 } ccmeEphoneDnChOutbound OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls placed by this Ephone-DN (line) channel." ::= { ccmeEphoneDnChStatsHistoryEntry 4 } ccmeEphoneDnChOutAnswered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls that were placed and answered by this Ephone-DN (line) channel." ::= { ccmeEphoneDnChStatsHistoryEntry 5 } ccmeEphoneDnChOutBusy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls that were placed from this channel and were not answered because of busy line." ::= { ccmeEphoneDnChStatsHistoryEntry 6 } ccmeEphoneDnChDiscAtConn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls that were placed from this channel and were disconnected during call setup." ::= { ccmeEphoneDnChStatsHistoryEntry 7 } ccmeEphoneDnChDiscAtAlert OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls that were placed from this channel and were disconnected during call alerting stage." ::= { ccmeEphoneDnChStatsHistoryEntry 8 } ccmeEphoneDnChDiscAtHold OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls that were placed from this channel and were disconnected during call was put on hold." ::= { ccmeEphoneDnChStatsHistoryEntry 9 } ccmeEphoneDnChDiscAtRing OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls that were received on this channel and were disconnected during alerting state." ::= { ccmeEphoneDnChStatsHistoryEntry 10 } ccmeEphoneDnChDiscCauseNearEnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last near end disconnect cause code seen by this channel." ::= { ccmeEphoneDnChStatsHistoryEntry 11 } ccmeEphoneDnChDiscCauseFarEnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last far end disconnect cause code seen by this channel." ::= { ccmeEphoneDnChStatsHistoryEntry 12 } -- ***************************************************************** -- Notifications -- ***************************************************************** ccmeMIBNotifications OBJECT IDENTIFIER ::= { ciscoCcmeMIBNotifs 0 } ccmeStatusChangeNotif NOTIFICATION-TYPE OBJECTS { ccmeSysTrapSeverity, ccmeEnabled, ccmeSysNotificationReason } STATUS current DESCRIPTION "A ccmeStatusChangeNotif is generated if there is a change in ccmeEnabled. This notification is generated only when value of the 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 1 } ccmeEphoneUnRegThresholdExceed NOTIFICATION-TYPE OBJECTS { ccmeEphoneUnRegThreshold } STATUS current DESCRIPTION "This notification is generated every time the total number of Ephones registered is exceeded and then dropped below threshold specified by 'ccmeEphoneUnRegThreshold' object. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 2 } ccmeEPhoneDeceased NOTIFICATION-TYPE OBJECTS { ccmeEphoneIpAddress, ccmeEphoneRegState } STATUS current DESCRIPTION "This notification is generated every time registered Ephone changes state to 'Deceased', indicating that the connection to the Cisco IP phone was closed because of a keepalive timeout. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 3 } ccmeEPhoneRegFailed NOTIFICATION-TYPE OBJECTS { ccmeEphoneIpAddress, ccmeEphoneTrapReason } STATUS current DESCRIPTION "This notification is generated every time an Ephone attempts to register but fails. This notification is only for those failures seen by the CCME or SRST gateway. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 4 } ccmeEphoneLoginFailed NOTIFICATION-TYPE OBJECTS { ccmeEphoneIpAddress, ccmeEphoneTrapReason } STATUS current DESCRIPTION "This notification is generated every time an Ephone user login is rejected/failed. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 5 } ccmeNightServiceChangeNotif NOTIFICATION-TYPE OBJECTS { ccmeEphoneTrapReason } STATUS current DESCRIPTION "A ccmeNightServiceChangeNotif notification is generated if there is change in night service status on this device. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 6 } ccmeLivefeedMohFailedNotif NOTIFICATION-TYPE OBJECTS { ccmeEphoneTrapReason } STATUS current DESCRIPTION "A ccmeLivefeedMohFailedNotif notification is generated when the Music-on-hold (Moh) live feed has failed. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 7 } ccmeMaxConferenceNotif NOTIFICATION-TYPE OBJECTS { ccmeEphoneTrapReason } STATUS current DESCRIPTION "A ccmeMaxConferenceNotif notification is generated if the maximum number of simultaneous three-party conferences supported by the Cisco CallManager Express is exceeded. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 8 } ccmeKeyEphoneRegChangeNotif NOTIFICATION-TYPE OBJECTS { ccmeEphoneIpAddress, ccmeEphoneRegState } STATUS current DESCRIPTION "A ccmeKeyEphoneRegChangeNotif notification is generated if there is a change in the registration status of Key IP phone. This objects is generated only if 'ccmeNotificationEnable' object is 'true'." ::= { ccmeMIBNotifications 9 } -- ***************************************************************** -- Conformance -- ***************************************************************** ciscoCcmeMIBCompliances OBJECT IDENTIFIER ::= { ciscoCcmeMIBConform 1 } ciscoCcmeMIBGroups OBJECT IDENTIFIER ::= { ciscoCcmeMIBConform 2 } ciscoCcmeMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the Cisco CallManager Express MIB." MODULE -- this module MANDATORY-GROUPS { ccmeConfigGroup, ccmeActiveStatsGroup, ccmeHistoryStatsGroup, ccmeNotifGroup } ::= { ciscoCcmeMIBCompliances 1 } ciscoCcmeMIBComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the Cisco CallManager Express MIB." MODULE -- this module MANDATORY-GROUPS { ccmeActiveStatsGroup, ccmeHistoryStatsGroup, ccmeNotifGroup, ccmeConfigGroup, ccmeConfigGroup1 } ::= { ciscoCcmeMIBCompliances 2 } ciscoCcmeMIBComplianceRev2 MODULE-COMPLIANCE STATUS current DESCRIPTION "Add the enhancement to monitor Extension Mobility phones including their configuration" MODULE -- this module MANDATORY-GROUPS { ccmeConfigGroup, ccmeActiveStatsGroup, ccmeHistoryStatsGroup, ccmeNotifGroup, ccmeConfigGroup1, ccmeConfigGroupEM, ccmeActiveStatsGroupEM } ::= { ciscoCcmeMIBCompliances 3 } -- Units of Conformance ccmeConfigGroup OBJECT-GROUP OBJECTS { ccmeEnabled, ccmeVersion, ccmeIPAddressType, ccmeIPAddress, ccmePortNumber, ccmeMaxEphones, ccmeMaxDirectoryNumber, ccmeMaxConferences, ccmeMaxRedirect, ccmeScriptName, ccmeVoiceMailNumber, ccmeMwiRelay, ccmeMwiExpires, ccmeTransferSystem, ccmeTimeFormat, ccmeDateFormat, ccmeUrlforServicesBtn, ccmeUrlforDirectoriesBtn, ccmeMohFlashFile, ccmeMohMulticastFromFlashEnabled, ccmeMohFlashMulticastIPAddrType, ccmeMohFlashMulticastIPAddr, ccmeMohFlashMulticastPortNum, ccmePhoneType, ccmePhoneFirmwareRev, ccmeTransferPattern, ccmeTransferPatternType, ccmeWebGUIEditEnabled, ccmeWebGUITimeEnabled, ccmeAfterHrsBlockPattern, ccmeAfterHrsBlockPatternAllTime, ccmeAfterHrsBlockDateMonth, ccmeAfterHrsBlockDate, ccmeAfterHrsBlockDateStartHour, ccmeAfterHrsBlockDateStartMin, ccmeAfterHrsBlockDateStopHour, ccmeAfterHrsBlockDateStopMin, ccmeAfterHrsBlockDay, ccmeAfterHrsBlockDayStartHour, ccmeAfterHrsBlockDayStartMin, ccmeAfterHrsBlockDayStopHour, ccmeAfterHrsBlockDayStopMin, ccmeNightServiceCode, ccmeNightServiceDateMonth, ccmeNightServiceDate, ccmeNightServiceDateStartHour, ccmeNightServiceDateStartMin, ccmeNightServiceDateStopHour, ccmeNightServiceDateStopMin, ccmeNightServiceDay, ccmeNightServiceDayStartHour, ccmeNightServiceDayStartMin, ccmeNightServiceDayStopHour, ccmeNightServiceDayStopMin, ccmeFXOHookFlashEnabled, ccmeSecondaryDialTonePrefix, ccmeWebAdminSystemUser, ccmeWebAdminCustomerUser, ccmeSystemMessage, ccmeDialplanPatternTag, ccmeDialplanPattern, ccmeDialplanExtLength, ccmeDialplanExtPattern, ccmeDialplanAllowRegiEnabled, ccmeKeepAliveTimeout, ccmeInterDigitTimeout, ccmeBusyTimeout, ccmeAlertTimeout, ccmeEphoneIpAddressType, ccmeEphoneIpAddress, ccmeEphoneMacAddress, ccmeEphoneModel, ccmeEphoneDnType, ccmeEphoneDnMode, ccmeEphoneDnPriNum, ccmeEphoneDnSecNum, ccmeEphoneDnName, ccmeEphoneDnLabel, ccmeEphoneDnPriPref, ccmeEphoneDnSecPref, ccmeEphoneDnCFBusyNum, ccmeEphoneDnCFAllNum, ccmeEphoneDnCFNoAnNum, ccmeEphoneDnCFNoAnTo, ccmeEphoneDnMwiCapability, ccmeEphoneDnHuntstop, ccmeEphoneDnHuntstopCh, ccmeEphoneDnHoldAltTo, ccmeEphoneDnHoldAltType, ccmeEphoneDnMwiSipSubscrEnabled, ccmeEphoneDnScriptName, ccmeEphoneUsername, ccmeNotificationEnable, ccmeSysTrapSeverity, ccmeSysNotificationReason, ccmeEphoneUnRegThreshold, ccmeEphoneKeyPhone, ccmeEphoneKeepAlive, ccmeEphoneAutoLineInEnabled, ccmeEphoneAutoLineOut, ccmeEphonePagingDn, ccmeEphonePagingPolicy, ccmeEphoneTemplate, ccmeEphoneAftHrsBlkExmptEnabled, ccmeEphoneNightBellSvcEnabled, ccmeEphoneAddon, ccmeEphoneKeepConfEnabled, ccmeEphoneTrapReason, ccmeUserAutoLogoutTo, ccmeUserLoginDeactivateTime, ccmeMwiSipServerIpAddress, ccmeMwiSipServerTransportType, ccmeMwiSipServerPortNumber, ccmeMwiSipServerRegE164Enabled, ccmeMwiSipSvrUnsolicitedEnabled, ccmeCorTag, ccmeCorListName, ccmeCorScope, ccmeCorDirection, ccmeCorStartingNumber, ccmeCorEndingNumber, ccmeCorVoiceRegPoolNumber, ccmeCorListDefaultEnabled, ccmeLoopbackDnforward, ccmeLoopbackDnStrip, ccmeLoopbackDnPrefix, ccmeLoopbackDnSuffix, ccmeLoopbackDnRetryTo, ccmeLoopbackDnAutoCon, ccmeLoopbackDnCodec, ccmeIntercomDnExtensionNum, ccmeIntercomDnBargeInEnabled, ccmeIntercomDnAutoAnsEnabled, ccmeIntercomDnLabel, ccmeEphoneSpeedDialTag, ccmeEphoneSpeedDialNumber, ccmeEphoneSpeedDialLabel, ccmeEphoneFastDialNumber, ccmeEphoneFastDialName, ccmeEphoneOverlayDN, ccmeMohMulticastIpAddressType, ccmeMohMulticastIpAddress, ccmeMohMulticastPortNumber, ccmeMohMulticastRoute } STATUS current DESCRIPTION "A collection of objects which are used to show the configuration of Cisco CallManager Express feature." ::= { ciscoCcmeMIBGroups 1 } ccmeActiveStatsGroup OBJECT-GROUP OBJECTS { ccmeEphoneCallLegs, ccmeEphoneTot, ccmeEphoneTotRegistered, ccmeEphoneTotKeyPhConfigured, ccmeEphoneTotKeyPhRegistered, ccmeEphoneDeviceName, ccmeEphoneRegState, ccmeEphoneActiveDN, ccmeEphoneActivityStatus, ccmeEphoneKeepAliveCnt, ccmeEphonePendingReset, ccmeEphoneRegTime, ccmeEphoneCurrentFirmwareRev, ccmeEphonePreviousFirmwareRev, ccmeEphoneLastError, ccmeEphoneObservedType, ccmeEphoneLoginStatus, ccmeEphoneDnDStatus, ccmeEphoneDebugStatus, ccmeEphoneMediaActive, ccmeEphoneTAPIClient, ccmeEphoneMediaCapability, ccmeEphoneRemote, ccmeMohSource, ccmeNightServiceEnabled } STATUS current DESCRIPTION "A collection of objects that show the active status of Cisco CallManager Express, Ephone and EphoneDN." ::= { ciscoCcmeMIBGroups 2 } ccmeHistoryStatsGroup OBJECT-GROUP OBJECTS { ccmeEphoneDnChIncoming, ccmeEphoneDnChInAnswered, ccmeEphoneDnChOutbound, ccmeEphoneDnChOutAnswered, ccmeEphoneDnChOutBusy, ccmeEphoneDnChDiscAtConn, ccmeEphoneDnChDiscAtAlert, ccmeEphoneDnChDiscAtHold, ccmeEphoneDnChDiscAtRing, ccmeEphoneDnChDiscCauseNearEnd, ccmeEphoneDnChDiscCauseFarEnd } STATUS current DESCRIPTION "Selects the group of objects that display the history status of EphoneDN." ::= { ciscoCcmeMIBGroups 3 } ccmeNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ccmeStatusChangeNotif, ccmeEphoneUnRegThresholdExceed, ccmeEPhoneDeceased, ccmeEPhoneRegFailed, ccmeEphoneLoginFailed, ccmeNightServiceChangeNotif, ccmeLivefeedMohFailedNotif, ccmeMaxConferenceNotif, ccmeKeyEphoneRegChangeNotif } STATUS current DESCRIPTION "A collection of notifications for the Cisco CallManager Express features." ::= { ciscoCcmeMIBGroups 4 } ccmeConfigGroup1 OBJECT-GROUP OBJECTS { ccmeEphonePrimaryDn } STATUS current DESCRIPTION "A collection of object which indicates the primary extension DN of an IP phone." ::= { ciscoCcmeMIBGroups 5 } ccmeConfigGroupEM OBJECT-GROUP OBJECTS { ccmeEMUserProfileTag, ccmeEMLogOutProfileTag, ccmeEMUserDirNum, ccmeEMUserDirNumOverlay, ccmeEMLogoutDirNum, ccmeEMLogoutDirNumOverlay } STATUS current DESCRIPTION "A collection of object which indicates a Cisco extension mobility IP phone." ::= { ciscoCcmeMIBGroups 6 } ccmeActiveStatsGroupEM OBJECT-GROUP OBJECTS { ccmeEMphoneTot, ccmeEMphoneTotRegistered } STATUS current DESCRIPTION "A collection of objects that show the active status of Extension Mobility phones on this Cisco CallManager Express." ::= { ciscoCcmeMIBGroups 7 } END