-- ***************************************************************** -- CISCO-CALL-RESOURCE-POOL-MIB.my: Cisco Call Resource Pool MIB file. -- -- Copyright (c) 1998, 1999-2005 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-CALL-RESOURCE-POOL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Integer32, Gauge32, Counter32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC CiscoRowOperStatus FROM CISCO-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ciscoMgmt FROM CISCO-SMI; ciscoCallResourcePoolMIB MODULE-IDENTITY LAST-UPDATED "200511180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-resource@cisco.com" DESCRIPTION "The MIB module for call resource pool management. This MIB supports the resource pool manager feature of CISCO IOS. This feature provides the ability to accept or reject calls based on DNIS numbers, resources required, user DNS domains, and counts of currently active sessions. " REVISION "200511180000Z" DESCRIPTION "Updated the imports such that Unsigned32 is imported from SNMPv2-SMI instead of CISCO-TC. Changed the syntax of ccrpCDCallType and ccrpCPResourceCallType from OCTET STRING(SIZE(1)) to BITS." REVISION "9811130000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 124 } -- Overview of Call Resource Pool MIB -- -- MIB description -- -- -- The Call Resource Pool MIB provides the both configuration and -- statistics for the entities associated with this feature. -- The following entities are managed: -- 1) DNIS Groups -- A group of DNIS (Destination Number Identification Service) -- numbers collected together and given a unique name. -- Behavior is associated with DNIS groups rather than -- individual DNIS numbers. DNIS numbers may be specified -- with wild cards. -- 2) DNIS Group Call Types -- Optional entries in this table allow specifying call types -- to assign to calls arriving with a DNIS number in the group, -- overriding the call's default type. -- 3) Call Discriminators -- Provides filtering of calls based on DNIS number and bearer -- capability. Allows NAS to not answer incoming calls matching -- call discriminator definitions. -- 4) Resource Groups -- Identifies a group of resources with common functionality -- and capabilities. Examples are modems, voice DSPs, HDLC -- framers. These are resources which are available to be -- assigned to calls as needed, rather than hardwired to -- specific interfaces. -- 5) Customer Profiles -- Specifies simultaneous sessions, allowed overflow sessions, -- DNIS groups used by that customer, resources to be used for -- different bearer capabilities, VPDN group, etc. -- 6) VPDN Groups -- Virtual Private Dial Network (VPDN) groups from the VPDN -- MIB, may be associated with customer profiles, allowing -- layer two tunnels to connect calls to customer home routers -- rather than going directly to layer three routing at the NAS. -- -- -- Relationships between the configuration tables. -- -- | Call | | Customer |____| Resource | -- |Discriminator| | Profile | | Group | -- \ / \ \ -- \ / \ \ -- \ / \ \ -- \/ \/ \/ \/ -- | DNIS | | VPDN | | Resource | -- |Group | | Group | | Range | -- / -- / -- \/ -- |DNIS Grp | -- |Call Type| -- -- -- Textual Conventions -- CcrpPhoneNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Text string representing a telephone number. Limited to numeric characters 0-9. " SYNTAX OCTET STRING (SIZE (1..64)) CcrpPhoneNumberPattern ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Text string representing a telephone number and wild card characters. Limited to numeric characters 0-9 and the wild cards '.' and 'x'. Both wild card characters match single digits only. " SYNTAX OCTET STRING (SIZE (1..64)) PhysicalPosition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A physical port specification. An unsigned integer representing the slot and port within that slot. The value is generated as: slot*10^6 + port Examples: port 16 located in slot 7 would be 7*10^6 + 16 = 7,000,000 + 16 = 7,000,016 port 0 located in slot 0 would be 0*10^6 + 0 = 0 " SYNTAX Unsigned32 -- Call Resource Pool MIB object definitions cCallResourcePoolMIBObjects OBJECT IDENTIFIER ::= { ciscoCallResourcePoolMIB 1 } -- Configuration objects ccrpConfiguration OBJECT IDENTIFIER ::= { cCallResourcePoolMIBObjects 1 } ccrpGeneralConfig OBJECT IDENTIFIER ::= { ccrpConfiguration 1 } ccrpDnisConfig OBJECT IDENTIFIER ::= { ccrpConfiguration 2 } ccrpCallDiscriminatorConfig OBJECT IDENTIFIER ::= { ccrpConfiguration 3 } ccrpResourceConfig OBJECT IDENTIFIER ::= { ccrpConfiguration 4 } ccrpCustomerProfileConfig OBJECT IDENTIFIER ::= { ccrpConfiguration 5 } -- Statistics objects ccrpStatistics OBJECT IDENTIFIER ::= { cCallResourcePoolMIBObjects 2 } ccrpCPStatistics OBJECT IDENTIFIER ::= { ccrpStatistics 1 } ccrpDnisStatistics OBJECT IDENTIFIER ::= { ccrpStatistics 2 } ccrpCDStatistics OBJECT IDENTIFIER ::= { ccrpStatistics 3 } -- -- General Configuration -- ccrpNoCPCallTreatment OBJECT-TYPE SYNTAX INTEGER { noAnswer(1), busy(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value returned to the telco switch if call is to be rejected because it doesn't match any defined customer profile. noAnswer(1) - ignore the call busy(2) - return busy " DEFVAL {noAnswer} ::= { ccrpGeneralConfig 1 } ccrpNoResourceCallTreatment OBJECT-TYPE SYNTAX INTEGER { channelNotAvailable(1), busy(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value returned to the telco switch if call is to be rejected because there is no available resource to answer the call. channelNotAvailable(1) - return channel not available, allowing switch to continue searching for an available channel busy(2) - return busy " DEFVAL {channelNotAvailable} ::= { ccrpGeneralConfig 2 } -- -- DNIS Group Configuration -- ccrpDnisGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpDnisGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table of DNIS groups. Each group is a list of individual DNIS numbers. " ::= { ccrpDnisConfig 1 } ccrpDnisGroupEntry OBJECT-TYPE SYNTAX CcrpDnisGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing a single DNIS number for the DNIS group identified by the first index. A single DNIS number may not exist in more than one DNIS group. Entries in this table may be created and deleted via the ccrpDnisGroupRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpDnisGroupRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpDnisGroupRowStatus to 'destroy'. Deleting the last entry for a specific value of ccrpDnisGroupName from this table will cause associated entries in the dependent tables to transition to a 'missingDependency' CiscoRowOperStatus. " INDEX { ccrpDnisGroupName, IMPLIED ccrpDnisGroupMember } ::= { ccrpDnisGroupTable 1 } CcrpDnisGroupEntry::= SEQUENCE { ccrpDnisGroupName SnmpAdminString, ccrpDnisGroupMember CcrpPhoneNumberPattern, ccrpDnisGroupRowStatus RowStatus } ccrpDnisGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..23)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name for this DNIS group" ::= { ccrpDnisGroupEntry 1 } ccrpDnisGroupMember OBJECT-TYPE SYNTAX CcrpPhoneNumberPattern (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DNIS for member of this DNIS group. A single DNIS number may not be a member of more than one DNIS group. Creating a new entry using a DNIS number that already exists will fail. The existing entry must be removed first, before creating a new entry under a different DNIS group name. " ::= { ccrpDnisGroupEntry 2 } ccrpDnisGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpDnisGroupEntry 3 } -- -- DNIS Group Call Type Configuration -- ccrpDnisGroupCallTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpDnisGroupCallTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used specify a call type to calls arriving with a signaling protocol which does not provide bearer capability. An example is Channel Associated Signaling (CAS). A call arriving with a DNIS configured in a DNIS group in this table will be assigned the call type given here. " ::= { ccrpDnisConfig 2 } ccrpDnisGroupCallTypeEntry OBJECT-TYPE SYNTAX CcrpDnisGroupCallTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, identifying a call type to assign to calls within the DNIS group. Entries in this table may be created and deleted via the ccrpDnisGroupCallTypeRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpDnisGroupCallTypeRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpDnisGroupRowStatus to 'destroy'. Creating a new row with a value of ccrpDnisGroupName which does not yet exist in ccrpDnisGroupTable will cause the new row's ccrpDnisGroupCallTypeOperStatus to have the value 'missingDependency'. Existing rows may be modified when the row is active. " INDEX { IMPLIED ccrpDnisGroupName } ::= { ccrpDnisGroupCallTypeTable 1 } CcrpDnisGroupCallTypeEntry::= SEQUENCE { ccrpDnisGroupCallType INTEGER, ccrpDnisGroupCallTypeOperStatus CiscoRowOperStatus, ccrpDnisGroupCallTypeRowStatus RowStatus } ccrpDnisGroupCallType OBJECT-TYPE SYNTAX INTEGER { digital(1), speech(2), undefined(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Call type to assign to calls arriving with DNIS number in this entry's DNIS group. " DEFVAL {undefined} ::= { ccrpDnisGroupCallTypeEntry 1 } ccrpDnisGroupCallTypeOperStatus OBJECT-TYPE SYNTAX CiscoRowOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A control object to indicate the operational status of this entry. This object is used to determine that the dependencies for this entry are valid and active. This entry is dependent on entries in ccrpDnisGroupTable. " ::= { ccrpDnisGroupCallTypeEntry 2 } ccrpDnisGroupCallTypeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpDnisGroupCallTypeEntry 3 } -- -- Call Discriminator Configuration -- ccrpCallDiscriminatorTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCallDiscriminatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of call discriminator definitions. A call discriminator enables call filtering based on call DNIS and call type. Calls to a specific DNIS which have call types identified in the associated call discriminator definition will be rejected. " ::= { ccrpCallDiscriminatorConfig 1 } ccrpCallDiscriminatorEntry OBJECT-TYPE SYNTAX CcrpCallDiscriminatorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single call discriminator definition. Entries in this table may be created and deleted via the ccrpCDRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpCDRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpCDRowStatus to 'destroy'. Deleting an entry from this table will cause associated entries in dependent tables to transition to a 'missingDependency' CiscoRowOperStatus. Existing rows may be modified when the row is active. " INDEX { IMPLIED ccrpCDName } ::= { ccrpCallDiscriminatorTable 1 } CcrpCallDiscriminatorEntry ::= SEQUENCE { ccrpCDName SnmpAdminString, ccrpCDCallType BITS, ccrpCDRowStatus RowStatus } ccrpCDName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..23)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name for this call discriminator definition" ::= { ccrpCallDiscriminatorEntry 1 } ccrpCDCallType OBJECT-TYPE SYNTAX BITS { digital(0), speech(1), v110(2), v120(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates types of calls to be filtered by this call discriminator definition. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates that call type is filtered. A 0-bit indicates that call type is not filtered. Bit 0 - Digital Bit 1 - Speech Bit 2 - V.110 Bit 3 - V.120 Setting all defined bits to 1 would result in all calls being rejected by this call discriminator. Setting all defined bits to zero would result in all calls being accepted by this discriminator. " DEFVAL {{}} ::= { ccrpCallDiscriminatorEntry 2 } ccrpCDRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpCallDiscriminatorEntry 3 } -- Call Discriminator Group association ccrpCDDiscriminatedGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCDDiscriminatedGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table identifying the groups to which each call discriminator definition is applied. " ::= { ccrpCallDiscriminatorConfig 2 } ccrpCDDiscriminatedGrpEntry OBJECT-TYPE SYNTAX CcrpCDDiscriminatedGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry identifies a group to be discriminated by the call discriminator. There may be multiple entries for the same call discriminator name. The same [group name, group type] pair may appear under multiple call discriminators. Entries in this table may be created and deleted via the ccrpCDDiscriminatedGroupRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpCDDnisGroupRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpCDDnisGroupRowStatus to 'destroy'. Creating a new row with a value of ccrpCDName which does not yet exist in ccrpCallDiscriminatorTable will cause the new row's ccrpCDDiscriminatedGroupOperStatus to have the value 'missingDependency'. " INDEX { ccrpCDName, ccrpCDDiscriminatedGroupName, ccrpCDDiscriminatedGroupType } ::= { ccrpCDDiscriminatedGrpTable 1 } CcrpCDDiscriminatedGrpEntry ::= SEQUENCE { ccrpCDDiscriminatedGroupName SnmpAdminString, ccrpCDDiscriminatedGroupType INTEGER, ccrpCDDiscriminatedGroupOperStatus CiscoRowOperStatus, ccrpCDDiscriminatedGroupRowStatus RowStatus } ccrpCDDiscriminatedGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..23)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name for the group being discriminated If this is a DNIS group, the value of this object is the same as some value of ccrmDnisGroupName. " ::= { ccrpCDDiscriminatedGrpEntry 1 } ccrpCDDiscriminatedGroupType OBJECT-TYPE SYNTAX INTEGER { dnis(1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates type of group being discriminated and the table where the value of ccrpCDDiscriminatedGroupName is defined. dnis(1) - DNIS Group. Value in ccrpCDDiscriminatedGroupName is same as value of ccrpDnisGroupName in the ccrpDnisGroupTable. " ::= { ccrpCDDiscriminatedGrpEntry 2 } ccrpCDDiscriminatedGroupOperStatus OBJECT-TYPE SYNTAX CiscoRowOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A control object to indicate the operational status of this entry. This object is used to determine that the dependencies for this entry are valid and active. This entry is currently only dependent on entries in ccrpDnisGroupTable. " ::= { ccrpCDDiscriminatedGrpEntry 3 } ccrpCDDiscriminatedGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless associated entries in other tables are also active. All values of RowStatus are allowed. " ::= { ccrpCDDiscriminatedGrpEntry 4 } -- -- Resource configuration -- ccrpResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table of resource group definitions. Resources within a group have identical capabilities. Group membership or size is defined differently depending on the nature of the resource. Resources identified by physical locality (port-based) are specified with multiple ranges in the ccrpResourceRangeTable. Alternatively, groups consisting of non-port resources simply use a single limit to specify the size. The object ccrpResourcePortBased is used to indicate the resource type. " ::= { ccrpResourceConfig 1 } ccrpResourceEntry OBJECT-TYPE SYNTAX CcrpResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the table, containing definition for a single resource group. Entries in this table may be created and deleted via the ccrpResourceGroupRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpResourceGroupRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpResourceGroupRowStatus to 'destroy'. Deleting an entry from this table will cause associated entries in dependent tables to transition to a 'missingDependency' CiscoRowOperStatus. Existing rows may be modified when the row is active. " INDEX { IMPLIED ccrpResourceName } ::= { ccrpResourceTable 1 } CcrpResourceEntry ::= SEQUENCE { ccrpResourceName SnmpAdminString, ccrpResourcePortBased TruthValue, ccrpResourceLimit Unsigned32, ccrpResourceGroupOperStatus CiscoRowOperStatus, ccrpResourceGroupRowStatus RowStatus } ccrpResourceName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..23)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name for this physical resource" ::= { ccrpResourceEntry 1 } ccrpResourcePortBased OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if the resources within this group are are port-based or not. Instantiating this with a value of false will also instantiate ccrpResourceLimit. " DEFVAL {true} ::= { ccrpResourceEntry 2 } ccrpResourceLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the size of this resource group for non-port based resources. This object is not instantiated for port-based resources. " DEFVAL {0} ::= { ccrpResourceEntry 3 } ccrpResourceGroupOperStatus OBJECT-TYPE SYNTAX CiscoRowOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A control object to indicate the operational status of this entry. This object is used to determine that the dependencies for this entry are valid and active. This entry is dependent on entries in ccrpResourceRangeTable if the value of ccrpResourcePortBased is true. " ::= { ccrpResourceEntry 4 } ccrpResourceGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpResourceEntry 5 } -- -- Resource Range Table -- ccrpResourceRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpResourceRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table of physical resource range definitions. Resources within a group have identical capabilities. The hardware implementing the resources within a range must be of the same type. Multiple ranges may be associated with the same resource group. Each range within a single resource group must be of identical hardware type. A resource range may not be associated with multiple resource groups. " ::= { ccrpResourceConfig 2 } ccrpResourceRangeEntry OBJECT-TYPE SYNTAX CcrpResourceRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the table, containing definition for a single physical resource range. Each entry specifies a contiguous range of individual resources using start and end identification. The individual resources within a range must be of the same type and capabilities. Entries in this table may be created and deleted via the ccrpResourceRangeRangeRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpResourceRangeRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpResourceRangeRowStatus to 'destroy'. Deleting the last entry for a specific value of ccrpResourceName from this table will cause the associated entry in the dependent ccrpResourceTable to transition to a 'missingDependency' CiscoRowOperStatus. Existing rows may be modified when the row is active. " INDEX { ccrpResourceName, ccrpResourceRangeIndex } ::= { ccrpResourceRangeTable 1 } CcrpResourceRangeEntry ::= SEQUENCE { ccrpResourceRangeIndex Unsigned32, ccrpResourceRangeStartPort PhysicalPosition, ccrpResourceRangeEndPort PhysicalPosition, ccrpResourceRangeOperStatus CiscoRowOperStatus, ccrpResourceRangeRowStatus RowStatus } ccrpResourceRangeIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for this physical resource range within the resource group. " ::= { ccrpResourceRangeEntry 1 } ccrpResourceRangeStartPort OBJECT-TYPE SYNTAX PhysicalPosition MAX-ACCESS read-create STATUS current DESCRIPTION " Range start for specifying resources within this range. The allowable values for each field within this object is system specific. The default value is slot 0, port 0 " DEFVAL {0} ::= { ccrpResourceRangeEntry 2 } ccrpResourceRangeEndPort OBJECT-TYPE SYNTAX PhysicalPosition MAX-ACCESS read-create STATUS current DESCRIPTION " Range end for specifying resources within this range. The allowable values for each field within this object is system specific. The default value is slot 0, port 0 " DEFVAL {0} ::= { ccrpResourceRangeEntry 3 } ccrpResourceRangeOperStatus OBJECT-TYPE SYNTAX CiscoRowOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A control object to indicate the operational status of this entry. This object is used to determine that the dependencies for this entry are valid and active. This entry is dependent on entries in ccrpResourceGroupTable. " ::= { ccrpResourceRangeEntry 4 } ccrpResourceRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpResourceRangeEntry 5 } -- -- Customer Profile Configuration -- ccrpCustomerProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCustomerProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of customer profiles definitions. " ::= { ccrpCustomerProfileConfig 1 } ccrpCustomerProfileEntry OBJECT-TYPE SYNTAX CcrpCustomerProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information about a single customer profile. Entries in this table may be created and deleted via the ccrpCPRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpCPRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpCPRowStatus to 'destroy'. Deleting an entry from this table will cause associated entries in dependent tables to transition to a 'missingDependency' CiscoRowOperStatus. Existing rows may be modified when the row is active. " INDEX { IMPLIED ccrpCPName } ::= { ccrpCustomerProfileTable 1 } CcrpCustomerProfileEntry ::= SEQUENCE { ccrpCPName SnmpAdminString, ccrpCPSessionLimit Unsigned32, ccrpCPOverflow Integer32, ccrpCPRowStatus RowStatus } ccrpCPName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..23)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name for this Customer Profile" ::= { ccrpCustomerProfileEntry 1 } ccrpCPSessionLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Simultaneous sessions limit for this customer profile. This is a soft limit if overflow is allowed as indicated in the object ccrpCPOverflow. The allowable value range is platform specific. " DEFVAL { 0 } ::= { ccrpCustomerProfileEntry 2 } ccrpCPOverflow OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of simultaneous sessions allowed over the value specified in ccrpCPSessionLimit. If this value is zero, no overflow is allowed and ccrpCPSessionLimit is a hard limit. If this value is -1, the is no overflow limit. All calls will be accepted, up to the exhaustion of system resources. The allowable value range is platform specific. " DEFVAL { 0 } ::= { ccrpCustomerProfileEntry 3 } ccrpCPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpCustomerProfileEntry 4 } -- Customer Profile DNIS Group association ccrpCPDnisGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCPDnisGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table identifying DNIS groups for each customer profile " ::= { ccrpCustomerProfileConfig 2 } ccrpCPDnisGrpEntry OBJECT-TYPE SYNTAX CcrpCPDnisGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry identifying a DNIS group for customer profile. There may be multiple entries for the same customer profile name. A single DNIS group may not be associated with more than one customer profile. Entries in this table may be created and deleted via the ccrpCPDnisGroupRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpCPDnisGroupRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpCPDnisGroupRowStatus to 'destroy'. Creating a new row with values of ccrpCPName or ccrpDnisGroupName which do not yet exist in ccrpCustomerProfileTable or ccrpDnisGroupTable respectively will cause the new row's ccrpCPDnisGroupOperStatus to have the value 'missingDependency'. Existing rows may be modified when the row is active. " INDEX { ccrpCPName, IMPLIED ccrpDnisGroupName } ::= { ccrpCPDnisGrpTable 1 } CcrpCPDnisGrpEntry ::= SEQUENCE { ccrpCPDnisGroupOperStatus CiscoRowOperStatus, ccrpCPDnisGroupRowStatus RowStatus } ccrpCPDnisGroupOperStatus OBJECT-TYPE SYNTAX CiscoRowOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A control object to indicate the operational status of this entry. This object is used to determine that the dependencies for this entry are valid and active. This entry is dependent on entries in ccrpDnisGroupTable and ccrpCustomerProfileTable. " ::= { ccrpCPDnisGrpEntry 1 } ccrpCPDnisGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpCPDnisGrpEntry 2 } -- Customer Profile Resource Group association ccrpCPResourceGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCPResourceGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table identifying resources groups for each customer profile. " ::= { ccrpCustomerProfileConfig 3 } ccrpCPResourceGrpEntry OBJECT-TYPE SYNTAX CcrpCPResourceGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Each entry identifying a resource group for a customer profile. There may be multiple resource group entries for the same customer profile name. A single resource group may be associated with more than one customer profile. Entries in this table may be created and deleted via the ccrpCPResourceRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpCPResourceRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpCPResourceRowStatus to 'destroy'. Creating a new row with values of ccrpCPName or ccrpResourceName which do not yet exist in ccrpCustomerProfileTable or ccrpResourceTable respectively will cause the new row's ccrpCPDnisGroupOperStatus to have the value 'missingDependency'. Existing rows may be modified when the row is active. " INDEX { ccrpCPName, ccrpResourceName, ccrpCPResourceCallType } ::= { ccrpCPResourceGrpTable 1 } CcrpCPResourceGrpEntry ::= SEQUENCE { ccrpCPResourceCallType BITS, ccrpCPResourceServiceProfileName SnmpAdminString, ccrpCPResourceOperStatus CiscoRowOperStatus, ccrpCPResourceRowStatus RowStatus } ccrpCPResourceCallType OBJECT-TYPE SYNTAX BITS { digital(0), speech(1), v110(2), v120(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates types of calls to assign to this resource for this customer profile. This object is a bit map, with each bit representing a different call type as identified below. A 1-bit indicates that call type is supported. A 0-bit indicates that call type is not supported. Bit 0 - Digital Bit 1 - Speech Bit 2 - V.110 Bit 3 - V.120 Setting all defined bits to 1 would result in this resource being available for all calls. Setting all defined bits to zero would result no calls being assigned to this resource. Q.931 specifies Bearer Capability associated with calls. RFC 2127, ISDN MIB defines the object isdnBearInfoType, combining Q.931 bearer capability information transfer capability and user rate. The correlation between Q.931 information transfer capability and call types is: Call Type Q.931 --------- ----- digital = {unrestricted digital, restricted digital} speech = {speech, 3.1kHz audio, 7kHz audio} v110 = {Anything with V.110 User Info Layer} v120 = {Anything with V.120 User Info Layer} The Q.931 user info layer values of V.110 or V.120 override all other fields in determining resource manager call types. The remaining Q.931 transfer capabilities are not currently supported by resource manager. The mapping for RFC2127 is: Call Type RFC2127 --------- ------- digital = {unrestrictedDigital,unrestrictedDigital56, restrictedDigital} speech = {speech, audio31, audio7} v110 = {Not represented in RFC2127} v120 = {Not represented in RFC2127} The remaining RFC2127 values are not currently supported by resource manager. " ::= { ccrpCPResourceGrpEntry 1 } ccrpCPResourceServiceProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..23)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of service profile to apply to this resource whenever a new call matching the CP is assigned to the resource. Service profiles are defined via the management console on the system. Assigning a service profile is optional. " DEFVAL {""} ::= { ccrpCPResourceGrpEntry 2 } ccrpCPResourceOperStatus OBJECT-TYPE SYNTAX CiscoRowOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A control object to indicate the operational status of this entry. This object is used to determine that the dependencies for this entry are valid and active. This entry is dependent on entries in ccrpResourceTable and ccrpCustomerProfileTable. " ::= { ccrpCPResourceGrpEntry 3 } ccrpCPResourceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpCPResourceGrpEntry 4 } -- Customer Profile VPDN Group association ccrpCPVGTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCPVGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table identifying VPDN groups for customer profiles. " ::= { ccrpCustomerProfileConfig 4 } ccrpCPVGEntry OBJECT-TYPE SYNTAX CcrpCPVGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Each entry identifies a VPDN group for a customer profile. Each customer profile may have multiple VPDN groups associated with it. A VPDN group may be associated with more than one customer profile. Entries in this table may be created and deleted via the ccrpCPVGRowStatus object or the management console on the system. Using SNMP, rows are created by a SET request setting the value of ccrpCPVGRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by a SET request setting the value of ccrpCPVGRowStatus to 'destroy'. Creating a new row with a value of ccrpCPName which does not yet exist in ccrpCustomerProfileTable or a value of ccrpCPVGName which has not been configured will cause the new row's ccrpCPDnisGroupOperStatus to have the value 'missingDependency'. Existing rows may be modified when the row is active. " INDEX { ccrpCPName, IMPLIED ccrpCPVGName } ::= { ccrpCPVGTable 1 } CcrpCPVGEntry ::= SEQUENCE { ccrpCPVGName SnmpAdminString, ccrpCPVGOperStatus CiscoRowOperStatus, ccrpCPVGRowStatus RowStatus } ccrpCPVGName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..23)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name for VPDN group for this customer profile. " ::= { ccrpCPVGEntry 1 } ccrpCPVGOperStatus OBJECT-TYPE SYNTAX CiscoRowOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "A control object to indicate the operational status of this entry. This object is used to determine that the dependencies for this entry are valid and active. This entry is dependent on entries in the ccrpCustomerProfileTable and VPDN group in system configuration. " ::= { ccrpCPVGEntry 2 } ccrpCPVGRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. An entry may not exist in the active(1) state unless all objects in the entry have an appropriate value. All values of RowStatus are allowed. " ::= { ccrpCPVGEntry 3 } -- -- Resource Manager Statistics -- -- Customer Profile Statistics ccrpCPStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of customer profile statistics. The information provided in this table may be used to better understand usage of network resources and improve capacity planning. " ::= { ccrpCPStatistics 1 } ccrpCPStatisticsEntry OBJECT-TYPE SYNTAX CcrpCPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics about a single customer profile. An entry is created for each customer profile within the ccrpCustomerProfileTable. " AUGMENTS { ccrpCustomerProfileEntry } ::= { ccrpCPStatisticsTable 1 } CcrpCPStatisticsEntry ::= SEQUENCE { ccrpCPActiveSessions Gauge32, ccrpCPActiveOverflowSessions Gauge32, ccrpCPTotalSessions Counter32, ccrpCPTotalOverflowSessions Counter32, ccrpCPNumberOverflowState Counter32, ccrpCPNumberMaxState Counter32, ccrpCPOverflowTime TimeTicks, ccrpCPMaxStateTime TimeTicks, ccrpCPPeakActiveSessions Gauge32, ccrpCPOverflowRejected Counter32, ccrpCPResourceRejected Counter32 } ccrpCPActiveSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active sessions for this customer profile." ::= { ccrpCPStatisticsEntry 1 } ccrpCPActiveOverflowSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION " Number of active sessions which are overflow sessions for this customer profile. Overflow sessions are those calls which arrived and were accepted when the customer profile's ccrpCPActiveSessions >= ccrpCPSessionLimit. " ::= { ccrpCPStatisticsEntry 2 } ccrpCPTotalSessions OBJECT-TYPE SYNTAX Counter32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of sessions for this customer profile since last system re-initialization. Includes non-overflow and overflow sessions. Includes all calls which were answered, including those which may have been terminated due to post-answer resource restrictions or authorization failures. " ::= { ccrpCPStatisticsEntry 3 } ccrpCPTotalOverflowSessions OBJECT-TYPE SYNTAX Counter32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of overflow sessions for this customer profile since last system re-initialization. Includes all calls which were answered and identified as overflow sessions, including those which may have been terminated due to post-answer resource limits or authorization failures. " ::= { ccrpCPStatisticsEntry 4 } ccrpCPNumberOverflowState OBJECT-TYPE SYNTAX Counter32 UNITS "occurrences" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this customer profile has been in an overflow state since last system re-initialization. The customer profile is in overflow state when ccrpCPActiveSessions > ccrpCPSessionLimit. If overflow is not allowed for this profile, this value is always zero. " ::= { ccrpCPStatisticsEntry 5 } ccrpCPNumberMaxState OBJECT-TYPE SYNTAX Counter32 UNITS "occurrences" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times this customer profile has reached its maximum allowed active sessions, including overflow sessions since last system re-initialization. The customer profile is in maximum state under the following conditions: Overflow allowed and limited ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize. Overflow not allowed ccrpCPActiveSessions = ccrpCPSessionLimit. If overflow is allowed, but not limited by ccrpCPOverflow, this value will always be zero. " ::= { ccrpCPStatisticsEntry 6 } ccrpCPOverflowTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time that this customer profile has been in overflow state since last system re-initialization. The customer profile is in overflow state when ccrpCPActiveSessions > ccrpCPSessionLimit. " ::= { ccrpCPStatisticsEntry 7 } ccrpCPMaxStateTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time that this customer profile has reached its maximum allowed active sessions since last system re- initialization. The customer profile is in maximum state under the following conditions: Overflow allowed and limited ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize. Overflow not allowed ccrpCPActiveSessions = ccrpCPSessionLimit. If overflow is allowed, but not limited by ccrpCPOverflow, this value will always be zero. " ::= { ccrpCPStatisticsEntry 8 } ccrpCPPeakActiveSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of active sessions which has occurred for this customer profile since last system re-initialization. This is the maximum value of ccrpCPActiveSessions since last system re-initialization. This includes non-overflow and overflow sessions. The peak value for the overflow sessions may be computed by subtracting the value of ccrpCPSessionLimit from this value. " ::= { ccrpCPStatisticsEntry 9 } ccrpCPOverflowRejected OBJECT-TYPE SYNTAX Counter32 UNITS "call attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls rejected due to exceeding allowed simultaneous sessions for this customer profile since last system re-initialization. If overflow is not allowed for this profile, this counts the number of times calls arrived when ccrpCPActiveSessions = ccrpCPSessionLimit. If overflow is allowed, this counts the number of time calls arrived when ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflow. If overflow is allowed, but not limited by ccrpCPOverflow, this value is always zero. Includes calls which were answered, then terminated due to post-answer session counting restrictions for the customer profile. Does not include calls terminated due to post-answer resource limits or post-answer authorization failures beyond customer profile authorizations. " ::= { ccrpCPStatisticsEntry 10 } ccrpCPResourceRejected OBJECT-TYPE SYNTAX Counter32 UNITS "call attempts" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls rejected due to unavailable resources for this customer profile since last system re-initialization. Includes calls which were answered then terminated due to post-answer resource restrictions. " ::= { ccrpCPStatisticsEntry 11 } -- DNIS Session Statistics ccrpDnisStatisticsTableMaxEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The limit on the number of entries that the ccrpDnisStatisticsTable may contain. When this table is full, any new DNIS values will be ignored. A value of 0 will prevent any DNIS statistics from being retained. If this value is set to 0 after entries already exist in the table, those entries will be deleted. Reducing the value will truncate the table based on the sort order of the index. The range for this value is from 0 to a system specific number specified by ccrpDnisStatisticsTableSystemMax. " DEFVAL { 0 } ::= { ccrpDnisStatistics 1 } ccrpDnisStatisticsTableSystemMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The system specific limit on the number of entries that the ccrpDnisStatisticsTable may contain. This is the maximum value that will be accepted for ccrpDnisStatisticsTableMaxEntries. " ::= { ccrpDnisStatistics 2 } ccrpDnisStatisticsTableLengthExceeded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a new DNIS has been ignored due to the ccrpDnisStatisticsTableMaxLength having been reached since last system re-initialization. When the table is full, this counter is incremented both for each new DNIS arriving, as well as every time the same DNIS arrives. " ::= { ccrpDnisStatistics 3 } ccrpDnisStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpDnisStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of session counts for individual DNIS numbers. The information provided in this table may be used to better understand usage of network resources and improve capacity planning. " ::= { ccrpDnisStatistics 4 } ccrpDnisStatisticsEntry OBJECT-TYPE SYNTAX CcrpDnisStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing session counts for a single DNIS number. The DNIS does not need to be a member of a DNIS group or be associated with a customer profile to appear in this table. Entries are created as a result of a call being received by the system with the DNIS number. " INDEX { IMPLIED ccrpDnisStatisticsDnisNumber } ::= { ccrpDnisStatisticsTable 1 } CcrpDnisStatisticsEntry ::= SEQUENCE { ccrpDnisStatisticsDnisNumber CcrpPhoneNumber, ccrpDnisStatisticsGroupName SnmpAdminString, ccrpDnisActiveSessions Gauge32, ccrpDnisTotalSessions Counter32, ccrpDnisPeakActiveSessions Gauge32, ccrpDnisCallTypeRejected Counter32 } ccrpDnisStatisticsDnisNumber OBJECT-TYPE SYNTAX CcrpPhoneNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "DNIS associated with call" ::= { ccrpDnisStatisticsEntry 1 } ccrpDnisStatisticsGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..23)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of DNIS group containing this DNIS. Value corresponds to ccrpDnisGroupName. If DNIS is not a member of a DNIS group, this value is a zero-length string. " ::= { ccrpDnisStatisticsEntry 2 } ccrpDnisActiveSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active sessions for this DNIS in the customer profile. Includes non-overflow and overflow sessions. " ::= { ccrpDnisStatisticsEntry 3 } ccrpDnisTotalSessions OBJECT-TYPE SYNTAX Counter32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of sessions for this DNIS in the customer profile since last system re-initialization. Includes non-overflow and overflow sessions. Includes all calls which were answered then terminated by post-answer restrictions for authorization failures. " ::= { ccrpDnisStatisticsEntry 4 } ccrpDnisPeakActiveSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of active sessions which has occurred for this DNIS since last system re-initialization. Includes non-overflow and overflow sessions. " ::= { ccrpDnisStatisticsEntry 5 } ccrpDnisCallTypeRejected OBJECT-TYPE SYNTAX Counter32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with this DNIS which were rejected due to call type mismatch, as defined in the ccrpCallDiscriminatorTable, since last system re-initialization. " ::= { ccrpDnisStatisticsEntry 6 } -- Call Discriminator Statistics ccrpCDStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF CcrpCDStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of call discriminator statistics. The information provided in this table may be used to better understand usage of network resources and improve capacity planning. " ::= { ccrpCDStatistics 1 } ccrpCDStatisticsEntry OBJECT-TYPE SYNTAX CcrpCDStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics about a single call discriminator definition. An entry is created for each call discriminator within the ccrpCallDiscriminatorTable. " AUGMENTS { ccrpCallDiscriminatorEntry } ::= { ccrpCDStatisticsTable 1 } CcrpCDStatisticsEntry ::= SEQUENCE { ccrpCDRejected Counter32 } ccrpCDRejected OBJECT-TYPE SYNTAX Counter32 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls rejected due to matching this call discriminator definition, as defined in the ccrpCallDiscriminatorTable, since last system re-initialization. " ::= { ccrpCDStatisticsEntry 1 } -- ****************************************************************** -- Notifications -- ****************************************************************** ccrpMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoCallResourcePoolMIB 2 } -- ****************************************************************** -- Conformance and Compliance -- ****************************************************************** ccrpMIBConformance OBJECT IDENTIFIER ::= { ciscoCallResourcePoolMIB 3 } ccrpMIBCompliances OBJECT IDENTIFIER ::= { ccrpMIBConformance 1 } ccrpMIBGroups OBJECT IDENTIFIER ::= { ccrpMIBConformance 2 } -- compliance statements ccrpMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO CALL RESOURCE POOL MIB" MODULE -- this module MANDATORY-GROUPS { ccrpGeneralConfigGroup, ccrpDnisConfigGroup, ccrpCDConfigGroup, ccrpResourceConfigGroup, ccrpCPConfigGroup, ccrpCPStatisticsGroup, ccrpDnisStatisticsGroup, ccrpCDStatisticsGroup } ::= { ccrpMIBCompliances 1 } -- units of conformance ccrpGeneralConfigGroup OBJECT-GROUP OBJECTS { ccrpNoCPCallTreatment, ccrpNoResourceCallTreatment } STATUS current DESCRIPTION "A collection of objects providing general Call Resource Pool configuration. " ::= { ccrpMIBGroups 1 } ccrpDnisConfigGroup OBJECT-GROUP OBJECTS { ccrpDnisGroupRowStatus, ccrpDnisGroupCallType, ccrpDnisGroupCallTypeOperStatus, ccrpDnisGroupCallTypeRowStatus } STATUS current DESCRIPTION "Objects for configuring a named collection of DNIS numbers. " ::= { ccrpMIBGroups 2 } ccrpCDConfigGroup OBJECT-GROUP OBJECTS { ccrpCDCallType, ccrpCDRowStatus, ccrpCDDiscriminatedGroupOperStatus, ccrpCDDiscriminatedGroupRowStatus } STATUS current DESCRIPTION "Objects for configuring a call discriminators. " ::= { ccrpMIBGroups 3 } ccrpResourceConfigGroup OBJECT-GROUP OBJECTS { ccrpResourcePortBased, ccrpResourceLimit, ccrpResourceGroupOperStatus, ccrpResourceGroupRowStatus, ccrpResourceRangeStartPort, ccrpResourceRangeEndPort, ccrpResourceRangeOperStatus, ccrpResourceRangeRowStatus } STATUS current DESCRIPTION "Objects for configuring resource groups. " ::= { ccrpMIBGroups 4 } ccrpCPConfigGroup OBJECT-GROUP OBJECTS { ccrpCPSessionLimit, ccrpCPOverflow, ccrpCPRowStatus, ccrpCPDnisGroupOperStatus, ccrpCPDnisGroupRowStatus, ccrpCPResourceServiceProfileName, ccrpCPResourceOperStatus, ccrpCPResourceRowStatus, ccrpCPVGOperStatus, ccrpCPVGRowStatus } STATUS current DESCRIPTION "Objects for configuring customer profiles. " ::= { ccrpMIBGroups 5 } ccrpCPStatisticsGroup OBJECT-GROUP OBJECTS { ccrpCPActiveSessions, ccrpCPActiveOverflowSessions, ccrpCPTotalSessions, ccrpCPTotalOverflowSessions, ccrpCPNumberOverflowState, ccrpCPNumberMaxState, ccrpCPOverflowTime, ccrpCPMaxStateTime, ccrpCPPeakActiveSessions, ccrpCPOverflowRejected, ccrpCPResourceRejected } STATUS current DESCRIPTION "Objects for providing customer profile statistics. " ::= { ccrpMIBGroups 6 } ccrpDnisStatisticsGroup OBJECT-GROUP OBJECTS { ccrpDnisStatisticsTableMaxEntries, ccrpDnisStatisticsTableSystemMax, ccrpDnisStatisticsTableLengthExceeded, ccrpDnisStatisticsGroupName, ccrpDnisActiveSessions, ccrpDnisTotalSessions, ccrpDnisPeakActiveSessions, ccrpDnisCallTypeRejected } STATUS current DESCRIPTION "Objects for providing DNIS statistics. " ::= { ccrpMIBGroups 7 } ccrpCDStatisticsGroup OBJECT-GROUP OBJECTS { ccrpCDRejected } STATUS current DESCRIPTION "Objects for providing call discriminator statistics. " ::= { ccrpMIBGroups 8 } END