-- ************************************************************ -- CISCO-CABLE-L2VPN-MIB.my: Cisco Cable L2VPN MIB file -- -- Feb 2009, Ajey Patil -- -- Copyright (c) 2009 by cisco Systems, Inc. -- All rights reserved. -- -- ************************************************************ CISCO-CABLE-L2VPN-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB CpwVcIDType, CpwVcType FROM CISCO-IETF-PW-TC-MIB ciscoMgmt FROM CISCO-SMI; ciscoCableL2vpnMIB MODULE-IDENTITY LAST-UPDATED "200906170000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-ubr@cisco.com" DESCRIPTION "This MIB module defines managed objects that facilitate the management of Cisco devices complying to the DOCSIS L2VPN Feature for IP/MPLS pseudo-wire. The Cisco CMTS implementation of IP/MPLS pseudo-wire is based on DOCSIS BSOD L2VPN specification. The information available through this MIB includes: Mapping information between various configuration of the pseudo-wire pertaining to DOCSIS BSOD L2VPN. The MIB tables implemented give quick access to information using either Cable Modem MAC address/VPN, peer IP address/VCID or L2vpnIndex as index in tables. Glossary: CMTS - Cable Modem Termination System VCID - Virtual Circuit Identifier MPLS - Multi-Protocol Label Switching AToM - Any Transport Over MPLS DOCSIS - Data over Cable Service Interface Specification BSOD - Business Services over DOCSIS L2VPN - Layer 2 Virtual Private Network pseudo-wire - Layer 2 connection over IP/MPLS backbone" REVISION "200906170000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 700 } CiscoCableL2vpnIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer value locally generated by the CMTS for each known pseudo-wire. It is intended to be used as a short index for tables in this MIB module. This index is allocated at runtime from a pool of indices for each pseudo-wire and is unique to that pseudo-wire only between every creation and deletion of that pseudo-wire." SYNTAX Unsigned32 (1..4294967295) ciscoCableL2vpnMIBNotifs OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIB 0 } ciscoCableL2vpnMIBObjects OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIB 1 } ciscoCableL2vpnMIBConform OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIB 2 } ccl2vpnMacVpnIdL2vpnIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF Ccl2vpnMacVpnIdL2vpnIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every L2VPN provisioned Cable Modem can be a part of multiple VPNs and the CMTS assigns a L2vpnIndex for each {Cable Modem MAC address, VPN-id} pair. This table maps {Cable Modem MAC address, VPN-id} to the L2vpnIndex." ::= { ciscoCableL2vpnMIBObjects 1 } ccl2vpnMacVpnIdL2vpnIndexEntry OBJECT-TYPE SYNTAX Ccl2vpnMacVpnIdL2vpnIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains the Cable Modem MAC address and VPN identifier and the corresponding L2vpnIndex. Entry in this table is populated for each one of the pseudo-wire provisioned on the CMTS." INDEX { ccl2vpnMac, IMPLIED ccl2vpnVpnId } ::= { ccl2vpnMacVpnIdL2vpnIndexTable 1 } Ccl2vpnMacVpnIdL2vpnIndexEntry ::= SEQUENCE { ccl2vpnMac MacAddress, ccl2vpnVpnId OCTET STRING, ccl2vpnMacVpnIdToL2vpnIndex CiscoCableL2vpnIndex } ccl2vpnMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the Cable Modem MAC address." ::= { ccl2vpnMacVpnIdL2vpnIndexEntry 1 } ccl2vpnVpnId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the VPN provisioned for L2VPN Cable Modem." ::= { ccl2vpnMacVpnIdL2vpnIndexEntry 2 } ccl2vpnMacVpnIdToL2vpnIndex OBJECT-TYPE SYNTAX CiscoCableL2vpnIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the L2vpnIndex assigned for this Cable Modem MAC Address/VPN pair by the CMTS." ::= { ccl2vpnMacVpnIdL2vpnIndexEntry 3 } ccl2vpnPWL2vpnIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF Ccl2vpnPWL2vpnIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every L2VPN Cable Modem can be provisioned with multiple VPNs and for each {Cable Modem MAC address, VPN-id} pair, there is a IP/MPLS pseudo-wire established. The pseudo-wire is specified by {peer IP address, VCID}. This table maps {peer IP address, VCID} to the L2vpnIndex." ::= { ciscoCableL2vpnMIBObjects 2 } ccl2vpnPWL2vpnIndexEntry OBJECT-TYPE SYNTAX Ccl2vpnPWL2vpnIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains the pseudo-wire peer IP address and Virtual Circuit Identifier (VCID) and the corresponding L2vpnIndex. Entry in this table is populated for each one of the pseudo-wire provisioned on the CMTS." INDEX { ccl2vpnPseudoWireType, ccl2vpnPeerIPAddressType, ccl2vpnPeerIPAddress, ccl2vpnVCID } ::= { ccl2vpnPWL2vpnIndexTable 1 } Ccl2vpnPWL2vpnIndexEntry ::= SEQUENCE { ccl2vpnPseudoWireType CpwVcType, ccl2vpnPeerIPAddressType InetAddressType, ccl2vpnPeerIPAddress InetAddress, ccl2vpnVCID CpwVcIDType, ccl2vpnPWToL2vpnIndex CiscoCableL2vpnIndex } ccl2vpnPseudoWireType OBJECT-TYPE SYNTAX CpwVcType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the pseudo-wire type." ::= { ccl2vpnPWL2vpnIndexEntry 1 } ccl2vpnPeerIPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the pseudo-wire peer IP address type provisioned for L2VPN." ::= { ccl2vpnPWL2vpnIndexEntry 2 } ccl2vpnPeerIPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the pseudo-wire peer IP address provisioned for L2VPN. The type of this address is determined by the value of ccl2vpnPeerIPAddressType object." ::= { ccl2vpnPWL2vpnIndexEntry 3 } ccl2vpnVCID OBJECT-TYPE SYNTAX CpwVcIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the Virtual Circuit Identifier (VCID) of the pseudo-wire." ::= { ccl2vpnPWL2vpnIndexEntry 4 } ccl2vpnPWToL2vpnIndex OBJECT-TYPE SYNTAX CiscoCableL2vpnIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the L2vpnIndex assigned by CMTS for this pseudo-wire peer IP address/VCID pair and for this Cable Modem MAC Address/VPN." ::= { ccl2vpnPWL2vpnIndexEntry 5 } ccl2vpnL2vpnIndexPWTable OBJECT-TYPE SYNTAX SEQUENCE OF Ccl2vpnL2vpnIndexPWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For every VPN provisioned for the L2VPN Cable Modem, the CMTS establishes pseudo-wire. This table maps L2vpnIndex to pseudo-wire configuration parameters." ::= { ciscoCableL2vpnMIBObjects 3 } ccl2vpnL2vpnIndexPWEntry OBJECT-TYPE SYNTAX Ccl2vpnL2vpnIndexPWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains the L2vpnIndex for the pseudo-wire and the corresponding configuration paramters including the Cable Modem MAC address, VPN identifier, peer IP address, Virtual Circuit Identifier (VCID) and pseudo-wire type. Entry in this table is populated for each one of the pseudo-wire provisioned on the CMTS." INDEX { ccl2vpnL2vpnIndex } ::= { ccl2vpnL2vpnIndexPWTable 1 } Ccl2vpnL2vpnIndexPWEntry ::= SEQUENCE { ccl2vpnL2vpnIndex CiscoCableL2vpnIndex, ccl2vpnPWMAC MacAddress, ccl2vpnPWVpnId OCTET STRING, ccl2vpnPWPeerIPAddressType InetAddressType, ccl2vpnPWPeerIPAddress InetAddress, ccl2vpnPWType CpwVcType, ccl2vpnPWVCID CpwVcIDType } ccl2vpnL2vpnIndex OBJECT-TYPE SYNTAX CiscoCableL2vpnIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the L2vpnIndex assigned for this Cable Modem MAC Address/VPN pair by the CMTS." ::= { ccl2vpnL2vpnIndexPWEntry 1 } ccl2vpnPWMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the Cable Modem MAC address." ::= { ccl2vpnL2vpnIndexPWEntry 2 } ccl2vpnPWVpnId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the VPN Identifier provisioned for L2VPN Cable Modem." ::= { ccl2vpnL2vpnIndexPWEntry 3 } ccl2vpnPWPeerIPAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the pseudo-wire peer IP address type." ::= { ccl2vpnL2vpnIndexPWEntry 4 } ccl2vpnPWPeerIPAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the pseudo-wire peer IP address. The type of this address is determined by the value of ccl2vpnPWPeerIPAddressType object." ::= { ccl2vpnL2vpnIndexPWEntry 5 } ccl2vpnPWType OBJECT-TYPE SYNTAX CpwVcType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the pseudo-wire type." ::= { ccl2vpnL2vpnIndexPWEntry 6 } ccl2vpnPWVCID OBJECT-TYPE SYNTAX CpwVcIDType MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the Virtual Circuit Identifier (VCID) for pseudo-wire." ::= { ccl2vpnL2vpnIndexPWEntry 7 } ccl2vpnMIBCompliances OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIBConform 1 } ccl2vpnMIBGroups OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIBConform 2 } ccl2vpnMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the CISCO-CABLE-L2VPN-MIB." MODULE -- this module MANDATORY-GROUPS { ccl2vpnPWMappingGroup } ::= { ccl2vpnMIBCompliances 1 } -- Units of Conformance ccl2vpnPWMappingGroup OBJECT-GROUP OBJECTS { ccl2vpnPWMAC, ccl2vpnPWVpnId, ccl2vpnPWPeerIPAddressType, ccl2vpnPWPeerIPAddress, ccl2vpnPWType, ccl2vpnPWVCID, ccl2vpnMacVpnIdToL2vpnIndex, ccl2vpnPWToL2vpnIndex } STATUS current DESCRIPTION "A collection of objects providing Cable L2VPN pseudo-wire configuration." ::= { ccl2vpnMIBGroups 1 } END