-- ***************************************************************** -- CISCO-BITS-CLOCK-MIB: -- -- January 2005 John Linton -- -- Copyright (c) 2005 by Cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- -- ***************************************************************** CISCO-BITS-CLOCK-MIB DEFINITIONS ::= BEGIN IMPORTS ciscoMgmt FROM CISCO-SMI entPhysicalDescr, entPhysicalIndex FROM ENTITY-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB TimeStamp, TruthValue FROM SNMPv2-TC Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE FROM SNMPv2-SMI; ciscoBitsClockMIB MODULE-IDENTITY LAST-UPDATED "200501210000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to generate notifications to indicate when clocking sources change roles or become unavailable. GR-1233CORE sections 8.1.2 Major Alarms and 8.1.3 Critical Alarms" REVISION "200501210000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 459 } -- Top-level structure of the MIB ciscoBitsClockMIBNotifs OBJECT IDENTIFIER ::= { ciscoBitsClockMIB 0 } ciscoBitsClockMIBObjects OBJECT IDENTIFIER ::= { ciscoBitsClockMIB 1 } ciscoBitsClockMIBConform OBJECT IDENTIFIER ::= { ciscoBitsClockMIB 2 } -- ************************************************************* -- * * -- * BITS Clock Sources * -- * * -- ************************************************************* cBitsClkSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF CBitsClkSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per clock source and is a sparse augmentation of the entPhysicalTable. This table provides additional information for each entry of the entPhysicalTable that acts as clock source." ::= { ciscoBitsClockMIBObjects 1 } cBitsClkSourceEntry OBJECT-TYPE SYNTAX CBitsClkSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular clock source." INDEX { entPhysicalIndex } ::= { cBitsClkSourceTable 1 } CBitsClkSourceEntry ::= SEQUENCE { cBitsClkSourceRoleAdmin INTEGER, cBitsClkSourceRoleCurrent INTEGER, cBitsClkSourceTimestamp TimeStamp, cBitsClkSourceActiveSeconds Counter32, cBitsClkSourceInactiveSeconds Counter32, cBitsClkSourceDescription SnmpAdminString } cBitsClkSourceRoleAdmin OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), tertiary(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the role of this clock source as defined by system administrator. " ::= { cBitsClkSourceEntry 1 } cBitsClkSourceRoleCurrent OBJECT-TYPE SYNTAX INTEGER { unavailable(0), primary(1), secondary(2), tertiary(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current role of BITS clock source. Also, indicates when clock source is unavailable. The 'unavailable' value indicates that the external source of clock signal has failed and indicates that this entry can not serve as clock source." ::= { cBitsClkSourceEntry 2 } cBitsClkSourceTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-write STATUS current DESCRIPTION "Timestamp used it indicate when this clock source entered the current role defined by cBitsClkSourceRoleCurrent object" ::= { cBitsClkSourceEntry 3 } cBitsClkSourceActiveSeconds OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of seconds that this clock source was active and able to serve role as specified as cBitsClkSourceRoleCurrent object." ::= { cBitsClkSourceEntry 4 } cBitsClkSourceInactiveSeconds OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of seconds that this clock source was inactive and unable to serve role as specified as cBitsClkSourceRoleCurrent object." ::= { cBitsClkSourceEntry 5 } cBitsClkSourceDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This will provide description in addition to entPhysicalDescr or ifDescr(if available) for the clock source." ::= { cBitsClkSourceEntry 6 } -- ************************************************************* -- * * -- * Notifications enable * -- * * -- ************************************************************* cBitsClkNotifEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The BITS clocking notification truth value. 'true' Indicates that all notification contained within this MIB are to be generated. 'false' Indicates that all notification contained within this MIB are disabled." DEFVAL { false } ::= { ciscoBitsClockMIBObjects 2 } -- ************************************************************* -- * * -- * Notifications * -- * * -- ************************************************************* ciscoBitsClockSource NOTIFICATION-TYPE OBJECTS { entPhysicalDescr, cBitsClkSourceDescription, cBitsClkSourceRoleAdmin, cBitsClkSourceRoleCurrent } STATUS current DESCRIPTION "Indicates the clock source has switch roles as clock source as indicated by cBitsClkSourceRoleCurrent" ::= { ciscoBitsClockMIBNotifs 1 } ciscoBitsClockFreerun NOTIFICATION-TYPE OBJECTS { entPhysicalDescr } STATUS current DESCRIPTION "An external clock source is unavailable. The internal clock will operate in freerun mode using appropiate local oscillator. Therefore, it does not provide synchronous clocking. This is the least stable of all operating modes." ::= { ciscoBitsClockMIBNotifs 2 } ciscoBitsClockHoldover NOTIFICATION-TYPE OBJECTS { entPhysicalDescr } STATUS current DESCRIPTION "An external clock source is unavailable. The internal clock will operate in holdover mode. The network clock module has stored information about the incoming clock signal, it can faithfully reproduce the lost signal while in holdover mode until a switchover to another clock source occurs." ::= { ciscoBitsClockMIBNotifs 3 } -- ************************************************************* -- * * -- * Conformance Information * -- * * -- ************************************************************* ciscoBitsClockMIBCompliances OBJECT IDENTIFIER ::= { ciscoBitsClockMIBConform 1 } ciscoBitsClockMIBGroups OBJECT IDENTIFIER ::= { ciscoBitsClockMIBConform 2 } -- ******************************************************************** -- Compliance Statements -- ******************************************************************** ciscoBitsClockMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO-BITS-CLOCK-MIB.my MIB" MODULE -- this module MANDATORY-GROUPS { ciscoBitsClockSourceGroup, ciscoBitsClockNotifGroup } ::= { ciscoBitsClockMIBCompliances 1 } -- **************************************************************** -- Units of Conformance -- **************************************************************** ciscoBitsClockSourceGroup OBJECT-GROUP OBJECTS { cBitsClkSourceRoleAdmin, cBitsClkSourceRoleCurrent, cBitsClkSourceTimestamp, cBitsClkSourceActiveSeconds, cBitsClkSourceInactiveSeconds, cBitsClkSourceDescription, cBitsClkNotifEnabled } STATUS current DESCRIPTION "BITS Clock Source Object Group" ::= { ciscoBitsClockMIBGroups 1 } ciscoBitsClockNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { ciscoBitsClockSource, ciscoBitsClockFreerun, ciscoBitsClockHoldover } STATUS current DESCRIPTION "BITS Clock Source Notifications Group" ::= { ciscoBitsClockMIBGroups 2 } END