-- ***************************************************************** -- ATM Access MIB file. -- -- January 1997, Chandrasekaran, Ravikumar -- -- Copyright (c) 1997 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-ATM-ACCESS-LIST-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC ifIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; ciscoAtmAccessListMIB MODULE-IDENTITY LAST-UPDATED "9611100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-atm@cisco.com" DESCRIPTION "A cisco ATM access list mib module." REVISION "9611180000Z" DESCRIPTION "Initial Version of this MIB module." ::= { ciscoMgmt 67 } ciscoAtmAccessListMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 1 } ciscoAtmAddressTemplate OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 1 } ciscoAtmAddressFilter OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 2 } ciscoAtmAccessGroup OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBObjects 3 } -- Textual Conventions: CiscoAtmAddressTemplate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A NSAP address or address template string. If it only contains hexadecimal digits, 20-octet long, it represents a single NSAP address. For example, 47.0091.8100.0000.0060.3e5b.7201.4000.0c is an NSAP address with no wild cards. If it contains one or more wild-card characters, it then represents multiple NSAP addresses as follows. An ellipsis ... matches any number of leading or trailing hexadecimal digits. For example, 12.8344... will match any address that starts with 12.8344 and ...0201.01 will match any address that ends with 0201.01. An asterisk * can be used to match any single 4-bit nibble in an address string. For example, in 47.8*9*1200000000603E5B7201.00603E5B7201.00 the 2nd nibble of the 2nd most significant byte and 2nd nibble of 3rd most significant byte will match any 4bit nibble value. An asterisk (*) enclosed by a pair of parentheses, can also be used to match any binary bit (0 or 1) in a 4-bit nibble. For example, in ...92(1*0*)8.01 the asterisk within parentheses will match either binary values 0 and 1." SYNTAX DisplayString (SIZE(1..70)) -- This MIB defines the following four tables : -- -- ciscoAtmAddressTemplateTable -- -- -- This table is used to alias the address-templates. The aliases created -- in this table may be refered to from ciscoAtmAddressFilterSetTable. -- -- ciscoAtmAddressFilterSetTable -- -- -- Each row in this table is either an addressFilter or a timeOfDayFilter. -- An addressFilter specifies an address-template which can be an actual -- address-template or an aliasname defined in the ciscoAtmAddressTemplateTable. -- For example, -- Consider the following row as existing already in the -- ciscoAtmAddressTemplateTable. -- atmAddressAliasName = "aaa" , -- atmAddressTemplate."aaa" = "47.8191..." and -- atmAddressTemplateRowStatus."aaa" = active -- -- For example, when an object atmAddressFilterSetTemplate."abc" in the -- ciscoAtmAddressFilterSetTable is set to a value of "aaa", the value that -- gets stored into the object is "47.8191..." which is obtained from the -- alias mapping defined by the ciscoAtmAddressTemplateTable. -- -- If no such alias exists in the ciscoAtmAddressTemplateTable whose row is -- active, an attempt shall be made to interpret the value as an -- address-template itself. In the above example, if the object -- atmAddressTemplateRowStatus."aaa" is not 'active' then this set operation -- will fail because 'aaa' is not a valid atm address-template. -- -- After the creation of the above filter row, any change to the value of -- atmAddressTemplate."aaa" will not affect the value of the object -- atmAddressFilterSetTemplate."abc". -- For example, if the value of atmAddressTemplate."aaa" is changed to -- "...9002.01", the value of atmAddressFilterSetTemplate."abc" in the above -- example will still remain "47.8191..." -- -- Those rows(filters) which have the same atmAddressFilterSetName form a -- FilterSet. These FilterSets can be combined to Form a Filter Expression. -- These FilterSets can also be associated with an interface as an incoming -- or an outgoing access-group. -- -- During call filtering, those filters in the filter-set that specify a -- complete 20-byte address with no wild cards are first considered for -- matching against the address to be filtered. -- Only if none of the filters with in a filter-set that specify complete -- 20-byte address without wild cards match, other filters are matched -- against the address to be filtered in the increasing order of their -- atmAddressFilterSetIndex values. -- -- For example, consider the following filter-set "abc" -- -- atmAddressFilterSetType."abc".1 = addressFilter -- atmAddressFilterSetTemplate."abc".1 = "47.8191..." -- atmAddressFilterSetPermission."abc".1 = deny -- -- the second filter is a complete 20-byte address with no wild cards : -- -- atmAddressFilterSetType."abc".2 = addressFilter -- atmAddressFilterSetTemplate."abc".2 = -- "47.00918100000000603E5B7201.00603E5B7201.01" -- atmAddressFilterSetPermission."abc".2 = deny -- -- the third filter is -- -- atmAddressFilterSetType."abc".5 = addressFilter -- atmAddressFilterSetTemplate."abc".5 = "...9876.01" -- atmAddressFilterSetPermission."abc".5 = deny -- -- In the above example, the filter with index 2 will be matched first with the -- address to be filtered. Only if this filter fails to match, the filters -- with atmAddressFilterSetIndex values 1 and 5 will be considered in that -- order respectively. If none of the filters match in a filter-set then -- the default action would be to deny the call. If this is not desired for a -- filter-set then a filter with a permission of "permit" and an -- address-template value of "..." has to be added to that filter-set as the -- last filter i.e., with the highest atmAddressFilterSetIndex value. So those -- addresses that dont match any other filter will certainly match the last -- default filter and will be permitted to go through. -- -- In the case of the time-of-day filters, if the start-time and the end-time -- are the same, it represents a 24-hour interval. -- -- ciscoAtmAddressFilterExpressionTable -- -- -- This Table is used to define filter expressions out of Filter Sets defined -- in the ciscoAtmAddressFilterSetTable and already existing Filter expressions -- defined in this table itself. -- -- atmAddressFilterExpressionOperator object in this table supports AND, OR, -- XOR, NOT operators. The objects atmAddressFilterExpressionTerm1 and -- atmAddressFilterExpressionTerm2 represent the operands. The object -- atmAddressFilterExpressionTerm2 should not be used for expressions with -- unary operator or no operator(none(5) operator). -- -- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 can -- only point to already active Filter Sets/Filter Expressions. Because of -- this, atmAddressFilterSetName and atmAddressFilterExpressionName objects -- shall have values that are unique across both ciscoAtmAddressFilterSetTable -- and ciscoAtmAddressFilterExpressionTable. -- -- Consider a FilterExpressionEntry for example, -- -- atmAddressFilterExpressionOperator."xyz" = NOT -- atmAddressFilterExpressionTerm1."xyz" = "abc" -- -- and the filter-set "abc" has three filters defined in it as follows : -- -- atmAddressFilterSetType."abc".1 = addressFilter -- atmAddressFilterSetTemplate."abc".1 = "47.8191..." -- atmAddressFilterSetPermission."abc".1 = deny -- -- the second filter is a complete 20-byte address with no wild cards : -- -- atmAddressFilterSetType."abc".2 = addressFilter -- atmAddressFilterSetTemplate."abc".2 = -- "47.00918100000000603E5B7201.00603E5B7201.01" -- atmAddressFilterSetPermission."abc".2 = deny -- -- the third filter is -- -- atmAddressFilterSetType."abc".5 = addressFilter -- atmAddressFilterSetTemplate."abc".5 = "...9876.01" -- atmAddressFilterSetPermission."abc".5 = deny -- -- If the value of atmAddressFilterSetTemplate."abc".5 is changed to "..." -- after the filter-expression "xyz" was created, the change will affect -- the filter-expression "xyz" too. The same would be true if the objects -- atmAddressFilterExpressionTerm1 and atmAddressFilterExpressionTerm2 refer -- to already active filter-expressions. -- -- -- ciscoAtmAccessGroupTable -- -- -- This table defines the out-going accessGroup and the incoming accessGroup -- for an interface. An AccessGroup can be a Filter Set or a Filter Expression. -- -- ciscoAtmAddressTemplateTable -- -- This is the ATM address template alias table ciscoAtmAddressTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoAtmAddressTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ATM address template alias Table. Entries in this table can be created and deleted by setting the atmAddressTemplateRowStatus object to appropriate values. Existing rows can be modified when the row is active. Entries in this table can be created/modified/ deleted through the commands provided by CLI also." ::= { ciscoAtmAddressTemplate 1 } ciscoAtmAddressTemplateEntry OBJECT-TYPE SYNTAX CiscoAtmAddressTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the address template table." INDEX { atmAddressAliasName } ::= { ciscoAtmAddressTemplateTable 1 } CiscoAtmAddressTemplateEntry ::= SEQUENCE { atmAddressAliasName DisplayString, atmAddressTemplate CiscoAtmAddressTemplate, atmAddressTemplateRowStatus RowStatus } atmAddressAliasName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..30)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The alias name for an ATM address template." ::= { ciscoAtmAddressTemplateEntry 1} atmAddressTemplate OBJECT-TYPE SYNTAX CiscoAtmAddressTemplate MAX-ACCESS read-create STATUS current DESCRIPTION "The Address Template to be aliased." ::= { ciscoAtmAddressTemplateEntry 2} atmAddressTemplateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To create, delete, read and write a row. Entries in this table can be modified on the fly. For example, value of atmAddressTemplateObject can be changed even when the corresponding atmAddressTemplateRowStatus object indicates that the row is active." ::= { ciscoAtmAddressTemplateEntry 3} -- This group is the ATM address filter set table ciscoAtmAddressFilterSetTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoAtmAddressFilterSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ATM address filter set Table. Entries in this table can be created/deleted by setting the atmAddressFilterSetRowStatus object to appropriate values. Existing entries in this table can be modified on the fly. Entries in this table can be created/modified/deleted through the commands provided by the CLI also." ::= { ciscoAtmAddressFilter 1 } ciscoAtmAddressFilterSetEntry OBJECT-TYPE SYNTAX CiscoAtmAddressFilterSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the address filter set table." INDEX { atmAddressFilterSetName, atmAddressFilterSetIndex } ::= { ciscoAtmAddressFilterSetTable 1 } CiscoAtmAddressFilterSetEntry ::= SEQUENCE { atmAddressFilterSetName DisplayString, atmAddressFilterSetIndex INTEGER, atmAddressFilterSetType INTEGER, atmAddressFilterSetTemplate DisplayString, atmAddressFilterSetStartHour INTEGER, atmAddressFilterSetStartMinute INTEGER, atmAddressFilterSetEndHour INTEGER, atmAddressFilterSetEndMinute INTEGER, atmAddressFilterSetPermission INTEGER, atmAddressFilterSetRowStatus RowStatus } atmAddressFilterSetName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..30)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name for an ATM address filter set." ::= { ciscoAtmAddressFilterSetEntry 1} atmAddressFilterSetIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index for a Filter in an ATM address filter set. The filters are matched in the ascending order of atmAddressFilterSetIndex. A filter with a lower atmAddressFilterSetIndex value is matched prior to a filter with a higher atmAddressFilterSetIndex value. The only exception to this rule are those address filters that specify all 20-bytes without using wildcards. These filters are matched before any other wildcard filter in a filter-set irrespective of the atmAddressFilterSetIndex value." ::= { ciscoAtmAddressFilterSetEntry 2} atmAddressFilterSetType OBJECT-TYPE SYNTAX INTEGER { addressFilter(1), timeOfDayFilter(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the type of a filter whether atm Address filter or a Time-of-day filter. If the value of this object is addressFilter(1) then the objects atmAddressFilterSetStartHour, atmAddressFilterSetStartMinute, atmAddressFilterSetEndHour and atmAddressFilterSetEndMinute shall contain only the default values and cannot be set to any other value. If the value of this object is timeOfDayFilter(2) then the object atmAddressFilterSetTemplate shall contain only the default value and cannot be set to any other value. If the value of this object is modified to timeOfDayFilter(2), for an existing addressFilter row, the corresponding atmAddressFilterSetTemplate object will be set to its default value automatically. If the value of this object is modified to addressFilter(1) for an existing timeOfDayFilter row, the corresponding objects atmAddressFilterSetStartHour, atmAddressFilterSetStartMinute, atmAddressFilterSetEndHour and atmAddressFilterSetEndMinute will be set to their default values automatically." DEFVAL { addressFilter } ::= { ciscoAtmAddressFilterSetEntry 3} atmAddressFilterSetTemplate OBJECT-TYPE SYNTAX DisplayString (SIZE(1..70)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is either an existing atmAddressAliasName, or an ATM address template, as described in the CiscoAtmAddressTemplate. If the value of this object matches an atmAddressAliasName in the ciscoAtmAddressTemplateTable, then the value of the corresponding atmAddressTemplate object will be used. And subsequent attempts to read this object will return the address-template instead of the alias name. Only if a such a match is not found in ciscoAtmAddressTemplateTable, an attempt can be made to interpret this object as a CiscoAtmAddressTemplate. The value of this object shall be '...' and cannot be set to any other value if a filter is of the type timeOfDayFilter" DEFVAL { "..." } ::= { ciscoAtmAddressFilterSetEntry 4} atmAddressFilterSetStartHour OBJECT-TYPE SYNTAX INTEGER (0..23) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Hours portion of the Start time of a Time-of-day filter. If the value of atmAddressFilterSetType object is addressFilter, then this object cannot be set and shall only contain the default value" DEFVAL { 0 } ::= { ciscoAtmAddressFilterSetEntry 5} atmAddressFilterSetStartMinute OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Minutes portion of the Start time of a Time-of-day filter. If the value of atmAddressFilterSetType object is addressFilter, then this object cannot be set and shall only contain the default value" DEFVAL { 0 } ::= { ciscoAtmAddressFilterSetEntry 6} atmAddressFilterSetEndHour OBJECT-TYPE SYNTAX INTEGER (0..23) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Hours portion of the End time of a Time-of-day filter. If the value of atmAddressFilterSetType object is addressFilter, then this object cannot be set and shall only contain the default value" DEFVAL { 0 } ::= { ciscoAtmAddressFilterSetEntry 7} atmAddressFilterSetEndMinute OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Minutes portion of the End time of a Time-of-day filter. If the value of atmAddressFilterSetType object is addressFilter, then this object cannot be set and shall only contain the default value" DEFVAL { 0 } ::= { ciscoAtmAddressFilterSetEntry 8} atmAddressFilterSetPermission OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the action of a filter set (either permit or deny), when a specific ATM address matches with the atmAddressFilterSetTemplate defined in this address filter set in case of an addressFilter or when the current time falls in the interval specified by the atmAddressFilterSetStartHour, atmAddressFiltersetStartMinute, atmAddressFilterSetEndHour and atmAddressFiltersetEndMinute objects in case of a timeOfDayFilter." DEFVAL { permit } ::= { ciscoAtmAddressFilterSetEntry 9} atmAddressFilterSetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To create, delete, read and write a row. Entries in this table can be modified on the fly. For exmaple, atmAddressFilterSetTemplate object of an existing addressFilter can be modified even if the value of the corresponding atmAddressFilterSetRowStatus object indicates that the row is active." ::= { ciscoAtmAddressFilterSetEntry 10} -- This group is the ATM address filter expression table ciscoAtmAddressFilterExpressionTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoAtmAddressFilterExpressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ATM address filter expression table. Entries in this table can be created/deleted by setting the atmAddressFilterExpressionRowStatus object to appropriate values. Existing entries in this table cannot be modified on the fly. Before an existing active entry can be modified, it has to be brought to notInService by setting the corresponding atmAddressFilterExpressionRowStatus object to notInService. Entries in this table can also be created/modified/deleted through the commands provided by the CLI." ::= { ciscoAtmAddressFilter 2 } ciscoAtmAddressFilterExpressionEntry OBJECT-TYPE SYNTAX CiscoAtmAddressFilterExpressionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the address filter expression table." INDEX { atmAddressFilterExpressionName } ::= { ciscoAtmAddressFilterExpressionTable 1 } CiscoAtmAddressFilterExpressionEntry ::= SEQUENCE { atmAddressFilterExpressionName DisplayString, atmAddressFilterExpressionQualifier1 INTEGER, atmAddressFilterExpressionTerm1 DisplayString, atmAddressFilterExpressionQualifier2 INTEGER, atmAddressFilterExpressionTerm2 DisplayString, atmAddressFilterExpressionOperator INTEGER, atmAddressFilterExpressionRowStatus RowStatus } atmAddressFilterExpressionName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..30)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name for an ATM address filter expression." ::= { ciscoAtmAddressFilterExpressionEntry 1} atmAddressFilterExpressionQualifier1 OBJECT-TYPE SYNTAX INTEGER { source(1), destination(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ATM filter set specified by the atmAddressFilterExpressionTerm1 should be applied to either the source (calling party) or destination (called party) ATM address. atmAddressFilterExpressionQualifier1 shall be none(3) if atmAddressFilterExpressionTerm1 is a Filter Expression or a timeOfDayFilter. The value of this object can be modified for an existing row only after placing that row notInService by setting the corresponding atmAddressFilterExpressionRowStatus object to notInService(2)." DEFVAL { destination } ::= { ciscoAtmAddressFilterExpressionEntry 2} atmAddressFilterExpressionTerm1 OBJECT-TYPE SYNTAX DisplayString (SIZE(1..30)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the name of the first ATM address filter set or ATM address filter expression used in the logical expression. The value of this object can only be either an already existing atmAddressFilterSetName whose row is already active in the ciscoAtmAddressFilterSetTable or an atmAddressFilterExpressionName whose row is already active in the ciscoAtmAddressFilterExpressionTable. When the reference that this object is pointing to gets deleted out from under it, this object may have a value that does not exist in both ciscoAtmAddressFilterSetTable and ciscoAtmAddressFilterExpressionTable and the expression will be evaluated as if the deleted filter resulted in a match with a permission of 'permit'. The value of this object can be modified for an existing row only after placing that row notInService by setting the corresponding atmAddressFilterExpressionRowStatus object to notInService." ::= { ciscoAtmAddressFilterExpressionEntry 3} atmAddressFilterExpressionQualifier2 OBJECT-TYPE SYNTAX INTEGER { source(1), destination(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ATM filter set or filter expression specified by the atmAddressFilterExpressionTerm2 should be applied to either the source (calling party) or destination (called party) ATM address. It is not used if the logical operator is NOT. atmAddressFilterExpressionQualifier2 shall be none(3) if atmAddressFilterExpressionTerm2 is a Filter Expression or timeOfDayFilter. The value of this object can be modified for an existing row only after placing the row notInService by setting the corresponding atmAddressFilterExpressionRowStatus object to notInService(2)." DEFVAL { destination } ::= { ciscoAtmAddressFilterExpressionEntry 4} atmAddressFilterExpressionTerm2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the second ATM address filter set or ATM address filter expression used in the logical expression. The value of this object can only be either an existing atmAddressFilterSetName whose row is already active in the ciscoAtmAddressFilterSetTable or an existing atmAddressFilterExpressionName whose row is already active in the ciscoAtmAddressFilterExpressionTable. The value of this object shall be null if the value of corresponding atmAddressFilterExpressionOperator object is not(4) or none(5). When the reference that this object is pointing to gets deleted out from under it, this object may have a value that does not exist in both ciscoAtmAddressFilterExpressionTable and ciscoAtmAddressFilterSetTable and the expression will be evaluated as if the deleted filter resulted in a match with a permission of 'permit'. The value of this object can be modified for an existing row only after placing that row notInService by setting the respective atmAddressFilterExpressionRowStatus object to the value notInService." ::= { ciscoAtmAddressFilterExpressionEntry 5} atmAddressFilterExpressionOperator OBJECT-TYPE SYNTAX INTEGER { and(1), or(2), xor(3), not(4), none(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The logical operator to be applied to the associated ATM address filter logical expression. The value of this object can be modified for an existing row only after placing that row notInService by setting the corresponding atmAddressFilterExpressionRowStatus object to the value notInService." ::= { ciscoAtmAddressFilterExpressionEntry 6} atmAddressFilterExpressionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "To create, delete, read and write a row. Existing entries in this table that are active cannot be modified on the fly. Before an existing entry in this table that is active can be modified, the corresponding atmAddressFilterExpressionRowStatus object has to be set to notInService." ::= { ciscoAtmAddressFilterExpressionEntry 7} -- This group is the ATM access group table ciscoAtmAccessGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CiscoAtmAccessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ATM access group Table. This table shall only include interfaces whose ifType is atm(37) or logicalAtm(80). Entries in this table can be modified through the commands provided by the CLI also." ::= { ciscoAtmAccessGroup 1 } ciscoAtmAccessGroupEntry OBJECT-TYPE SYNTAX CiscoAtmAccessGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ATM access group table. This table shall only include interfaces whose ifType is atm(37) or logicalAtm(80)" INDEX { ifIndex } ::= { ciscoAtmAccessGroupTable 1 } CiscoAtmAccessGroupEntry ::= SEQUENCE { atmInboundAccessGroupName DisplayString, atmOutboundAccessGroupName DisplayString } atmInboundAccessGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of an ATM address filter set or expression used for access control for inbound call on the associated interface." ::= { ciscoAtmAccessGroupEntry 1} atmOutboundAccessGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of an ATM address filter set or expression used for access control for outbound call on the associated interface." ::= { ciscoAtmAccessGroupEntry 2} -- conformance information ciscoAtmAccessListMIBConformance OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIB 3 } ciscoAtmAccessListMIBCompliances OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 1 } ciscoAtmAccessListMIBGroups OBJECT IDENTIFIER ::= { ciscoAtmAccessListMIBConformance 2 } -- compliance statements ciscoAtmAccessListMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the Cisco ATM access list group." MODULE -- this module MANDATORY-GROUPS { ciscoAtmAccessListMIBGroup } ::= { ciscoAtmAccessListMIBCompliances 1 } -- units of conformance ciscoAtmAccessListMIBGroup OBJECT-GROUP OBJECTS { atmAddressTemplate, atmAddressTemplateRowStatus, atmAddressFilterSetType, atmAddressFilterSetTemplate, atmAddressFilterSetStartHour, atmAddressFilterSetStartMinute, atmAddressFilterSetEndHour, atmAddressFilterSetEndMinute, atmAddressFilterSetPermission, atmAddressFilterSetRowStatus, atmAddressFilterExpressionQualifier1, atmAddressFilterExpressionTerm1, atmAddressFilterExpressionQualifier2, atmAddressFilterExpressionTerm2, atmAddressFilterExpressionOperator, atmAddressFilterExpressionRowStatus, atmInboundAccessGroupName, atmOutboundAccessGroupName } STATUS current DESCRIPTION "" ::= { ciscoAtmAccessListMIBGroups 1 } END