-- ***************************************************************** -- BASIS-ONLINE-DIAG-MIB -- Online diagnostics mib -- -- June 2003 Subra Hegde -- -- Copyright (c) 2003 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** BASIS-ONLINE-DIAG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ciscoWan FROM CISCOWAN-SMI axisDiagnostics FROM BASIS-MIB; basisOnlineDiagMIB MODULE-IDENTITY LAST-UPDATED "200306110000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "This MIB contains information on the online diagnostics in MGX82xx(MGX8250, MGX8220, MGX8230 etc) products." REVISION "200306110000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB. Also the descriptions of some of the objects have been modified." ::= { ciscoWan 80 } onlineDiagnostics OBJECT IDENTIFIER ::= { axisDiagnostics 3 } diagType OBJECT-TYPE SYNTAX INTEGER { post (1), onlinediag(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is used to identify the type of diagnostics. post (1) : Power On Self Test. onlineDiag(2) : Online Diagnostics. When a trap is sent to report diagnostics results this is used as a varbind to indicate the type of diagnostics." ::= { onlineDiagnostics 1 } diagResult OBJECT-TYPE SYNTAX INTEGER { passed(1), failed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is used to indicate the result of the diagnostics." ::= { onlineDiagnostics 2 } diagTestId OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is used to indicate the test number of the diagnostics test that failed. The value depends upon the implementation in the each of the MGX82xx product." ::= { onlineDiagnostics 3 } -- conformance information boDiagMIBConformance OBJECT IDENTIFIER ::= { basisOnlineDiagMIB 2 } boDiagMIBCompliances OBJECT IDENTIFIER ::= { boDiagMIBConformance 1 } boDiagMIBGroups OBJECT IDENTIFIER ::= { boDiagMIBConformance 2 } -- compliance statements boDiagCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the basis online diagnostics MIB." MODULE -- this module MANDATORY-GROUPS { boDiagGroup } ::= { boDiagMIBCompliances 1 } boDiagGroup OBJECT-GROUP OBJECTS { diagType, diagResult, diagTestId } STATUS current DESCRIPTION "A collection of objects providing the online diagnostics information." ::= { boDiagMIBGroups 1 } END