ALCATEL-IND1-INLINE-POWER-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Integer32
		FROM SNMPv2-SMI
	pethPsePortEntry, pethMainPseEntry
		FROM POWER-ETHERNET-MIB
        MODULE-COMPLIANCE, OBJECT-GROUP
		FROM SNMPv2-CONF
	softentIND1InLinePower
		FROM ALCATEL-IND1-BASE;

alcatelIND1INLINEPOWERMIB MODULE-IDENTITY
    LAST-UPDATED "200106080000Z" 
    ORGANIZATION "Alcatel - Architects Of An Internet World"
    CONTACT-INFO
        "Please consult with Customer Service to insure the most appropriate
         version of this document is used with the products in question:
         
                    Alcatel Internetworking, Incorporated
                   (Division 1, Formerly XYLAN Corporation)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America
        
        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507
        
        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://www.ind.alcatel.com
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):
         
             Propietary InLinePower Extensions MIB definitions
         
         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.
         
         No liability shall be assumed for any incidental, indirect, special,
	 or consequential damages whatsoever arising from or related to this
         document or the information contained herein.
         
         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.
         
           Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200303030000Z"
    DESCRIPTION
        "The latest version of this MIB Module."

    ::= { softentIND1InLinePower 1 }


   alaPethObjects       OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 1 }
   alaPethConformance   OBJECT IDENTIFIER ::= { alcatelIND1INLINEPOWERMIB 2 }

   -- PSE Objects

     alaPethPsePortTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF AlaPethPsePortEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
              "A table of objects that augments the standard pethPsePortTable
              entry by adding the alaPethPsePortPowerMaximum object."
          ::= { alaPethObjects 1 }

      alaPethPsePortEntry OBJECT-TYPE
          SYNTAX      AlaPethPsePortEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
                  "A set of objects that display and control the power
                  characteristics of a power Ethernet PSE port."
          AUGMENTS  { pethPsePortEntry }  
          ::= { alaPethPsePortTable 1 }


      AlaPethPsePortEntry ::= SEQUENCE {
           alaPethPsePortPowerMaximum
                INTEGER
      }

       alaPethPsePortPowerMaximum OBJECT-TYPE
       SYNTAX INTEGER ( 3000 .. 20000 )   
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
           "This object controls maximum amount of power per port." 
       ::= { alaPethPsePortEntry 1 }

   -- Main PSE Objects

   alaPethMainPseTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF AlaPethMainPseEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
              "This table augments the standard table PethMainPseTable by allowing the 
              admin status for a group to be set to on/off as well as
              showing the values for the max power for that group."
          ::= { alaPethObjects 2 }

      alaPethMainPseEntry OBJECT-TYPE
          SYNTAX      AlaPethMainPseEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
               "A set of objects that display and control the Main power
                of a PSE. "
          AUGMENTS  { pethMainPseEntry }  
          ::= { alaPethMainPseTable 1 }

      AlaPethMainPseEntry ::= SEQUENCE {
          alaPethMainPseAdminStatus
              INTEGER,
          alaPethMainPseMaxPower 
              Integer32
      }

        alaPethMainPseAdminStatus OBJECT-TYPE
          SYNTAX INTEGER   {
                  on(1),
                  off(2)
             }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION
                  "The object is used to set the status of the main PSE to ON or OFF."
          ::= { alaPethMainPseEntry 1 }

        alaPethMainPseMaxPower OBJECT-TYPE
          SYNTAX      Integer32  (36..800)
          UNITS      "Watts"
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION
                  "The maximum amount of power allowed for main PSE." 
          ::= { alaPethMainPseEntry 2 }
          
          
   --
   -- Conformance Section
   --
   alaPethCompliances OBJECT IDENTIFIER ::= { alaPethConformance 1 }
   alaPethGroups      OBJECT IDENTIFIER ::= { alaPethConformance 2 }

   alaPethCompliance MODULE-COMPLIANCE
       STATUS  current
       DESCRIPTION
               "Describes the requirements for conformance to the
               Alcatel Power Ethernet MIB."
       MODULE  -- this module
           GROUP   alaPethPsePortGroup
           DESCRIPTION
               "The alaPethPsePortGroup is mandatory for systems which
               implement PSE ports."
           GROUP   alaPethMainPseGroup
           DESCRIPTION
               "The pethMainPseGroup is mandatory for systems which
               implement main power supply within a PSE Device."
   ::= { alaPethCompliances 1 }

   alaPethPseCompliance MODULE-COMPLIANCE
       STATUS  current
       DESCRIPTION
               "Describes the requirements for conformance to the PSE"
       MODULE  -- this module
       MANDATORY-GROUPS {alaPethPsePortGroup, alaPethMainPseGroup}
        ::= { alaPethCompliances 2 }

   alaPethPsePortGroup OBJECT-GROUP
       OBJECTS {
          alaPethPsePortPowerMaximum
       }
       STATUS  current
       DESCRIPTION
             "The pethPsePortGroup is mandatory for systems which
             implement PSE ports."
       ::= { alaPethGroups 1 }

   alaPethMainPseGroup OBJECT-GROUP
       OBJECTS {
		alaPethMainPseAdminStatus,
          	alaPethMainPseMaxPower 
       }
       STATUS  current
       DESCRIPTION
               "Main PSE Objects. "
       ::= { alaPethGroups 2 }

END