ALCATEL-IND1-GROUP-MOBILITY-MIB DEFINITIONS ::= BEGIN IMPORTS RowStatus, MacAddress FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF softentIND1GroupMobility, groupmobilityTraps FROM ALCATEL-IND1-BASE; alcatelIND1GroupMobilityMIB MODULE-IDENTITY LAST-UPDATED "200106180000Z" ORGANIZATION "Alcatel - Architects Of An Internet World" CONTACT-INFO "Please consult with Customer Service to insure the most appropriate version of this document is used with the products in question: Alcatel Internetworking, Incorporated (Division 1, Formerly XYLAN Corporation) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://www.ind.alcatel.com File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Group Mobility for dynamic vlan assignment to source learning entries and ports. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE" REVISION "200106180000Z" DESCRIPTION "Addressing discrepancies with Alcatel Standard." ::= { softentIND1GroupMobility 1} -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Setting group mobility rules: Since there is no such thing as a default -- rule with default values for any rule type, the values for group mobility -- rules must be set before the row status is finally set to create-and-go. -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1GroupMobilityMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Group Mobility Subsystem Managed Objects." ::= { alcatelIND1GroupMobilityMIB 1 } alcatelIND1GroupMobilityMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Group Mobility Subsystem Conformance Information." ::= { alcatelIND1GroupMobilityMIB 2 } alcatelIND1GroupMobilityMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Group Mobility Subsystem Units Of Conformance." ::= { alcatelIND1GroupMobilityMIBConformance 1 } alcatelIND1GroupMobilityMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Group Mobility Subsystem Compliance Statements." ::= { alcatelIND1GroupMobilityMIBConformance 2 } groupMobilityRule OBJECT IDENTIFIER ::= { alcatelIND1GroupMobilityMIBObjects 1 } -- Group Mobility Group -- Implementation Mandatory -- These are the rules defining dynamic VLAN classification of traffic sources. -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- IP network address rule *** vIpNetRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VIpNetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IP network address rules." ::= { groupMobilityRule 1 } vIpNetRuleEntry OBJECT-TYPE SYNTAX VIpNetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP network address rule entry." INDEX { vIpNetRuleAddr, vIpNetRuleMask } ::= { vIpNetRuleTable 1 } VIpNetRuleEntry ::= SEQUENCE { vIpNetRuleAddr IpAddress, vIpNetRuleMask IpAddress, vIpNetRuleVlanId INTEGER, vIpNetRuleStatus RowStatus } vIpNetRuleAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP network address used for VLAN classification." ::= { vIpNetRuleEntry 1 } vIpNetRuleMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP network mask applying to the IP network address." ::= { vIpNetRuleEntry 2 } vIpNetRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vIpNetRuleEntry 3 } vIpNetRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vIpNetRuleEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- IPX network address rule *** vIpxNetRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VIpxNetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IPX network address rules." ::= { groupMobilityRule 2 } vIpxNetRuleEntry OBJECT-TYPE SYNTAX VIpxNetRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPX network address rule entry." INDEX {vIpxNetRuleAddr } ::= { vIpxNetRuleTable 1 } VIpxNetRuleEntry ::= SEQUENCE { vIpxNetRuleAddr Unsigned32, vIpxNetRuleEncap INTEGER, vIpxNetRuleVlanId INTEGER, vIpxNetRuleStatus RowStatus } vIpxNetRuleAddr OBJECT-TYPE SYNTAX Unsigned32 (1..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPX network address used for VLAN classification." ::= { vIpxNetRuleEntry 1 } vIpxNetRuleEncap OBJECT-TYPE SYNTAX INTEGER { ethernet2 (1), novellraw (2), llc (3), snap (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "IPX frame encapsulation." DEFVAL { ethernet2 } ::= { vIpxNetRuleEntry 2 } vIpxNetRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vIpxNetRuleEntry 3 } vIpxNetRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vIpxNetRuleEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- MAC address rule *** vMacRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MAC address rules." ::= { groupMobilityRule 3 } vMacRuleEntry OBJECT-TYPE SYNTAX VMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC rule entry." INDEX {vMacRuleAddr } ::= { vMacRuleTable 1 } VMacRuleEntry ::= SEQUENCE { vMacRuleAddr MacAddress, vMacRuleVlanId INTEGER, vMacRuleStatus RowStatus } vMacRuleAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used for VLAN classification." ::= { vMacRuleEntry 1 } vMacRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vMacRuleEntry 2 } vMacRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vMacRuleEntry 3 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- MAC range rule *** vMacRangeRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VMacRangeRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MAC range rules." ::= { groupMobilityRule 4 } vMacRangeRuleEntry OBJECT-TYPE SYNTAX VMacRangeRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC range rule entry." INDEX {vMacRangeRuleLoAddr } ::= { vMacRangeRuleTable 1 } VMacRangeRuleEntry ::= SEQUENCE { vMacRangeRuleLoAddr MacAddress, vMacRangeRuleHiAddr MacAddress, vMacRangeRuleVlanId INTEGER, vMacRangeRuleStatus RowStatus } vMacRangeRuleLoAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of MAC address range used for VLAN classification." ::= { vMacRangeRuleEntry 1 } vMacRangeRuleHiAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound of MAC address range used for VLAN classification." ::= { vMacRangeRuleEntry 2 } vMacRangeRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vMacRangeRuleEntry 3 } vMacRangeRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vMacRangeRuleEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- MAC-Port-IP binding rule *** vMacPortIpBRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VMacPortIpBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MAC-Port-Ip binding rules." ::= { groupMobilityRule 5 } vMacPortIpBRuleEntry OBJECT-TYPE SYNTAX VMacPortIpBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC-Port-IP binding rule entry." INDEX {vMacPortIpBRuleMac } ::= { vMacPortIpBRuleTable 1 } VMacPortIpBRuleEntry ::= SEQUENCE { vMacPortIpBRuleMac MacAddress, vMacPortIpBRuleIfIndex Unsigned32, vMacPortIpBRuleIp IpAddress, vMacPortIpBRuleVlanId INTEGER, vMacPortIpBRuleStatus RowStatus } vMacPortIpBRuleMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used for binding VLAN classification." ::= { vMacPortIpBRuleEntry 1 } vMacPortIpBRuleIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port." ::= { vMacPortIpBRuleEntry 2 } vMacPortIpBRuleIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address used for binding VLAN classification." ::= { vMacPortIpBRuleEntry 3 } vMacPortIpBRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vMacPortIpBRuleEntry 4 } vMacPortIpBRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vMacPortIpBRuleEntry 5 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Port-IP binding rule *** vPortIpBRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VPortIpBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Port-Ip binding rules." ::= { groupMobilityRule 6 } vPortIpBRuleEntry OBJECT-TYPE SYNTAX VPortIpBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Port-IP binding rule entry." INDEX {vPortIpBRuleIp } ::= { vPortIpBRuleTable 1 } VPortIpBRuleEntry ::= SEQUENCE { vPortIpBRuleIp IpAddress, vPortIpBRuleIfIndex Unsigned32, vPortIpBRuleVlanId INTEGER, vPortIpBRuleStatus RowStatus } vPortIpBRuleIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address used for binding VLAN classification." ::= { vPortIpBRuleEntry 1 } vPortIpBRuleIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port." ::= { vPortIpBRuleEntry 2 } vPortIpBRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vPortIpBRuleEntry 3 } vPortIpBRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vPortIpBRuleEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- MAC-IP binding rule *** vMacIpBRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VMacIpBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Mac-Ip binding rules." ::= { groupMobilityRule 7 } vMacIpBRuleEntry OBJECT-TYPE SYNTAX VMacIpBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Mac-IP binding rule entry." INDEX {vMacIpBRuleMac } ::= { vMacIpBRuleTable 1 } VMacIpBRuleEntry ::= SEQUENCE { vMacIpBRuleMac MacAddress, vMacIpBRuleIp IpAddress, vMacIpBRuleVlanId INTEGER, vMacIpBRuleStatus RowStatus } vMacIpBRuleMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used for binding VLAN classification." ::= { vMacIpBRuleEntry 1 } vMacIpBRuleIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address used for binding VLAN classification." ::= { vMacIpBRuleEntry 2 } vMacIpBRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vMacIpBRuleEntry 3 } vMacIpBRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vMacIpBRuleEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- MAC-Port binding rule *** vMacPortBRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VMacPortBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MAC-Port binding rules." ::= { groupMobilityRule 8 } vMacPortBRuleEntry OBJECT-TYPE SYNTAX VMacPortBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC-Port binding rule entry." INDEX {vMacPortBRuleMac } ::= { vMacPortBRuleTable 1 } VMacPortBRuleEntry ::= SEQUENCE { vMacPortBRuleMac MacAddress, vMacPortBRuleIfIndex Unsigned32, vMacPortBRuleVlanId INTEGER, vMacPortBRuleStatus RowStatus } vMacPortBRuleMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used for binding VLAN classification." ::= { vMacPortBRuleEntry 1 } vMacPortBRuleIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port." ::= { vMacPortBRuleEntry 2 } vMacPortBRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vMacPortBRuleEntry 3 } vMacPortBRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vMacPortBRuleEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- MAC-Port-Proto binding rule *** vMacPortProtoBRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VMacPortProtoBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MAC-Port binding rules." ::= { groupMobilityRule 9 } vMacPortProtoBRuleEntry OBJECT-TYPE SYNTAX VMacPortProtoBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC-Port binding rule entry." INDEX {vMacPortProtoBRuleMacAddr, vMacPortProtoBRuleProtoClass, vMacPortProtoBRuleEthertype, vMacPortProtoBRuleDsapSsap} ::= { vMacPortProtoBRuleTable 1 } VMacPortProtoBRuleEntry ::= SEQUENCE { vMacPortProtoBRuleMacAddr MacAddress, vMacPortProtoBRuleIfIndex Unsigned32, vMacPortProtoBRuleProtoClass INTEGER, vMacPortProtoBRuleEthertype INTEGER, vMacPortProtoBRuleDsapSsap INTEGER, vMacPortProtoBRuleVlanId INTEGER, vMacPortProtoBRuleStatus RowStatus } vMacPortProtoBRuleMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used for binding VLAN classification." ::= { vMacPortProtoBRuleEntry 1 } vMacPortProtoBRuleIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port." ::= { vMacPortProtoBRuleEntry 2 } vMacPortProtoBRuleProtoClass OBJECT-TYPE SYNTAX INTEGER { ipE2 (1), ipSnap (2), ipxE2(3), ipxNov(4), ipxLlc(5), ipxSnap(6), decnet(7), appletalk(8), ethertypeE2(9), dsapSsap(10), ethertypeSnap(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encoded protocol number used for binding VLAN classification." ::= { vMacPortProtoBRuleEntry 3 } vMacPortProtoBRuleEthertype OBJECT-TYPE SYNTAX INTEGER (1536..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethertype value for generic ethertype or snap rule. This value has no meaning for vMacPortProtoBRuleProtoClass set to values other than 9 or 11." ::= { vMacPortProtoBRuleEntry 4 } vMacPortProtoBRuleDsapSsap OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vMacPortProtoBRuleProtoClass set to values other than 10." ::= { vMacPortProtoBRuleEntry 5 } vMacPortProtoBRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vMacPortProtoBRuleEntry 6 } vMacPortProtoBRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vMacPortProtoBRuleEntry 7 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Port-Proto binding rule *** vPortProtoBRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VPortProtoBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Port-Protocol binding rules." ::= { groupMobilityRule 10 } vPortProtoBRuleEntry OBJECT-TYPE SYNTAX VPortProtoBRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Port-Protocol binding rule entry." INDEX {vPortProtoBRuleIfIndex, vPortProtoBRuleProtoClass, vPortProtoBRuleEthertype, vPortProtoBRuleDsapSsap} ::= { vPortProtoBRuleTable 1 } VPortProtoBRuleEntry ::= SEQUENCE { vPortProtoBRuleIfIndex Unsigned32, vPortProtoBRuleProtoClass INTEGER, vPortProtoBRuleEthertype INTEGER, vPortProtoBRuleDsapSsap INTEGER, vPortProtoBRuleVlanId INTEGER, vPortProtoBRuleStatus RowStatus } vPortProtoBRuleIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port." ::= { vPortProtoBRuleEntry 1 } vPortProtoBRuleProtoClass OBJECT-TYPE SYNTAX INTEGER { ipE2 (1), ipSnap (2), ipxE2(3), ipxNov(4), ipxLlc(5), ipxSnap(6), decnet(7), appletalk(8), ethertypeE2(9), dsapSsap(10), ethertypeSnap(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encoded protocol number used for binding VLAN classification." ::= { vPortProtoBRuleEntry 2 } vPortProtoBRuleEthertype OBJECT-TYPE SYNTAX INTEGER (1536..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethertype value for generic ethertype or snap rule. This value has no meaning for vPortProtoBRuleProtoClass set to values other than 9 or 11." ::= { vPortProtoBRuleEntry 3 } vPortProtoBRuleDsapSsap OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vPortProtoBRuleProtoClass set to values other than 10." ::= { vPortProtoBRuleEntry 4 } vPortProtoBRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vPortProtoBRuleEntry 5 } vPortProtoBRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vPortProtoBRuleEntry 6 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- DHCP MAC address rule *** vDhcpMacRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VDhcpMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DHCP MAC address rules." ::= { groupMobilityRule 11 } vDhcpMacRuleEntry OBJECT-TYPE SYNTAX VDhcpMacRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DHCP MAC rule entry." INDEX {vDhcpMacRuleAddr } ::= { vDhcpMacRuleTable 1 } VDhcpMacRuleEntry ::= SEQUENCE { vDhcpMacRuleAddr MacAddress, vDhcpMacRuleVlanId INTEGER, vDhcpMacRuleStatus RowStatus } vDhcpMacRuleAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP MAC address used for VLAN classification." ::= { vDhcpMacRuleEntry 1 } vDhcpMacRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vDhcpMacRuleEntry 2 } vDhcpMacRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vDhcpMacRuleEntry 3 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- DHCP Port address rule *** vDhcpPortRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VDhcpPortRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DHCP port rules." ::= { groupMobilityRule 12 } vDhcpPortRuleEntry OBJECT-TYPE SYNTAX VDhcpPortRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MAC rule entry." INDEX {vDhcpPortRuleIfIndex } ::= { vDhcpPortRuleTable 1 } VDhcpPortRuleEntry ::= SEQUENCE { vDhcpPortRuleIfIndex Unsigned32, vDhcpPortRuleVlanId INTEGER, vDhcpPortRuleStatus RowStatus } vDhcpPortRuleIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port." ::= { vDhcpPortRuleEntry 1 } vDhcpPortRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vDhcpPortRuleEntry 2 } vDhcpPortRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vDhcpPortRuleEntry 3 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- DHCP Generic rule *** vDhcpGenericRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VDhcpGenericRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The generic port rule -- in table for uniformity's sake." ::= { groupMobilityRule 13 } vDhcpGenericRuleEntry OBJECT-TYPE SYNTAX VDhcpGenericRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DHCP generic rule entry -- there is at most one." INDEX {vDhcpGenericRuleVlanId } ::= { vDhcpGenericRuleTable 1 } VDhcpGenericRuleEntry ::= SEQUENCE { vDhcpGenericRuleVlanId INTEGER, vDhcpGenericRuleStatus RowStatus } vDhcpGenericRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vDhcpGenericRuleEntry 1 } vDhcpGenericRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vDhcpGenericRuleEntry 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Protocol rule *** vProtoRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VProtoRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Protocol rules." ::= { groupMobilityRule 14 } vProtoRuleEntry OBJECT-TYPE SYNTAX VProtoRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Protocol rule entry." INDEX {vProtoRuleProtoClass, vProtoRuleEthertype, vProtoRuleDsapSsap} ::= { vProtoRuleTable 1 } VProtoRuleEntry ::= SEQUENCE { vProtoRuleProtoClass INTEGER, vProtoRuleEthertype INTEGER, vProtoRuleDsapSsap INTEGER, vProtoRuleVlanId INTEGER, vProtoRuleStatus RowStatus } vProtoRuleProtoClass OBJECT-TYPE SYNTAX INTEGER { ipE2 (1), ipSnap (2), ipxE2(3), ipxNov(4), ipxLlc(5), ipxSnap(6), decnet(7), appletalk(8), ethertypeE2(9), dsapSsap(10), ethertypeSnap(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "The encoded protocol number used for binding VLAN classification." ::= { vProtoRuleEntry 1 } vProtoRuleEthertype OBJECT-TYPE SYNTAX INTEGER (1536..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethertype value for generic ethertype or snap rule. This value has no meaning for vProtoRuleProtoClass set to values other than 9 or 11." ::= { vProtoRuleEntry 2 } vProtoRuleDsapSsap OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vProtoRuleProtoClass set to values other than 10." ::= { vProtoRuleEntry 3 } vProtoRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vProtoRuleEntry 4 } vProtoRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vProtoRuleEntry 5 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Custom rule *** vCustomRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VCustomRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Custom rules." ::= { groupMobilityRule 15 } vCustomRuleEntry OBJECT-TYPE SYNTAX VCustomRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Custom rule entry." INDEX {vCustomRuleOffset, vCustomRuleValue} ::= { vCustomRuleTable 1 } VCustomRuleEntry ::= SEQUENCE { vCustomRuleValue Unsigned32, vCustomRuleMask Unsigned32, vCustomRuleOffset INTEGER, vCustomRuleVlanId INTEGER, vCustomRuleStatus RowStatus } vCustomRuleValue OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The value to match for VLAN classification." ::= { vCustomRuleEntry 1 } vCustomRuleMask OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Mask applied to value for rule matching." DEFVAL { 4294967295 } ::= { vCustomRuleEntry 2 } vCustomRuleOffset OBJECT-TYPE SYNTAX INTEGER (0..72) MAX-ACCESS read-write STATUS current DESCRIPTION "Location of value to be matched relative to start of frame." ::= { vCustomRuleEntry 3 } vCustomRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vCustomRuleEntry 4 } vCustomRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vCustomRuleEntry 5 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Port rule *** vPortRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VPortRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Port rules." ::= { groupMobilityRule 16 } vPortRuleEntry OBJECT-TYPE SYNTAX VPortRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Port rule entry." INDEX {vPortRuleIfIndex, vPortRuleVlanId} ::= { vPortRuleTable 1 } VPortRuleEntry ::= SEQUENCE { vPortRuleIfIndex Unsigned32, vPortRuleVlanId INTEGER, vPortRuleStatus RowStatus } vPortRuleIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port." ::= { vPortRuleEntry 1 } vPortRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vPortRuleEntry 2 } vPortRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vPortRuleEntry 3 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- DHCP MAC Range address rule *** vDhcpMacRangeRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF VDhcpMacRangeRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of DHCP MAC Range address rules." ::= { groupMobilityRule 17 } vDhcpMacRangeRuleEntry OBJECT-TYPE SYNTAX VDhcpMacRangeRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DHCP MAC Range rule entry." INDEX {vDhcpMacRangeRuleLoAddr } ::= { vDhcpMacRangeRuleTable 1 } VDhcpMacRangeRuleEntry ::= SEQUENCE { vDhcpMacRangeRuleLoAddr MacAddress, vDhcpMacRangeRuleHiAddr MacAddress, vDhcpMacRangeRuleVlanId INTEGER, vDhcpMacRangeRuleStatus RowStatus } vDhcpMacRangeRuleLoAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of MAC address range used for DHCP VLAN classification." ::= { vDhcpMacRangeRuleEntry 1 } vDhcpMacRangeRuleHiAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The higher bound of MAC address range used for DHCP VLAN classification." ::= { vDhcpMacRangeRuleEntry 2 } vDhcpMacRangeRuleVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vDhcpMacRangeRuleEntry 3 } vDhcpMacRangeRuleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row Status for creating/deleting rules." ::= { vDhcpMacRangeRuleEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx groupMobilityPort OBJECT IDENTIFIER ::= { alcatelIND1GroupMobilityMIBObjects 2 } -- mobile port properties *** vMobilePortTable OBJECT-TYPE SYNTAX SEQUENCE OF VMobilePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Controls and reports the mobility status of a port. Also controls and reports other mobility related properties: default vlan permanance, restoration, and enabling; also whether to ignore BPDUs or change the port mode to fixed upon receiving BPDUs; also whether a mobile port is an authentication port." ::= { groupMobilityPort 1 } vMobilePortEntry OBJECT-TYPE SYNTAX VMobilePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "On a given port indicates mobility related properties." INDEX { vMobilePortIfIndex } ::= { vMobilePortTable 1 } VMobilePortEntry ::= SEQUENCE { vMobilePortIfIndex Unsigned32, vMobilePortMobility INTEGER, vMobilePortDefVlanRestore INTEGER, vMobilePortDefVlanEnable INTEGER, vMobilePortIgnoreBPDU INTEGER, vMobilePortAuthenticate INTEGER, vMobilePortCfgDefVlan INTEGER } vMobilePortIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex corresponding to a potentially mobile port. Mobile and Fixed ports are potentially mobile ports (of course in the Mobile case, the potential has been realized). Tagged, Aggregable, and Mirroring ports are not potentially mobile ports." ::= { vMobilePortEntry 1 } vMobilePortMobility OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether port is mobile (has mobility property). All potentially mobile ports have this property (potentially mobile ports includes both mobile ports and non-mobile fixed ports)." DEFVAL { disable } ::= { vMobilePortEntry 2 } vMobilePortDefVlanRestore OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates default vlan restore state. There has been a major change to the usage of this element: it now controls whether or not dynamic VPAs will be aged on a mobile port. Restore = enable means that aging is activated; restore = disable means that no VPA aging will occur on this port. Aging is accomplished by determining that there are no longer any corresponding layer two source entries for the port. Non-mobile ports that are potentially mobile do not have this property - a get returns notApplicable." DEFVAL { enable } ::= { vMobilePortEntry 3 } vMobilePortDefVlanEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates default vlan enable state. When enabled, the port is not prevented from forwarding and receiving frames in the default vlan as appropriate. When disabled, the port is prevented from forwarding and receiving frames in the default vlan. Non-mobile ports that are potentially mobile do not have this property - a get returns notApplicable." DEFVAL { enable } ::= { vMobilePortEntry 4 } vMobilePortIgnoreBPDU OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether BPDUs should be ignored on port. This is normally disabled -- BPDUs are not ignored but cause the port to lose its mobility property (it becomes a fixed port instead). Non-mobile ports that are potentially mobile do not have this property - a get returns notApplicable." DEFVAL { disable } ::= { vMobilePortEntry 5 } vMobilePortAuthenticate OBJECT-TYPE SYNTAX INTEGER { enable-avlan(1), disable(2), notApplicable(3), enable-8021x(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies a mobile port as being an authenticated port also. A non-mobile port cannot be an authenticated port at this point. Non-mobile ports that are potentially mobile do not have this property - a get returns notApplicable." DEFVAL { disable } ::= { vMobilePortEntry 6 } vMobilePortCfgDefVlan OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured default vlan on this port." ::= { vMobilePortEntry 7 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- Traps -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx groupmobilityTrapsDesc OBJECT IDENTIFIER ::= { groupmobilityTraps 1 } groupmobilityTrapsObj OBJECT IDENTIFIER ::= { groupmobilityTraps 2 } gmBindRuleViolation NOTIFICATION-TYPE OBJECTS { gmBindRuleType, gmBindRuleVlanId, gmBindRuleIPAddress, gmBindRuleMacAddress, gmBindRulePortIfIndex, gmBindRuleProtoClass, gmBindRuleEthertype, gmBindRuleDsapSsap } STATUS current DESCRIPTION "A bind-violation trap occurs whenever a binding rule which has been configured gets violated." ::= { groupmobilityTrapsDesc 0 1 } -- -- Trap objects -- -- Bind Rule Type gmBindRuleType OBJECT-TYPE SYNTAX INTEGER { mac-port-ip (9), port-ip (10), mac-ip (11), mac-port (12), mac-port-proto (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of binding rule for which trap sent." ::= { groupmobilityTrapsObj 1 } -- Bind Rule VLAN Id gmBindRuleVlanId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Binding Rule VLAN Id." ::= { groupmobilityTrapsObj 2 } -- Bind Rule IP gmBindRuleIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "BInding Rule IP address." ::= { groupmobilityTrapsObj 3 } -- Bind Rule Mac gmBindRuleMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Binding Rule Mac Address" ::= { groupmobilityTrapsObj 4 } -- Bind Rule Port gmBindRulePortIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ifIndex corresponding to the mobile port on which binding rule violation occured." ::= { groupmobilityTrapsObj 5 } -- Bind Rule protocol gmBindRuleProtoClass OBJECT-TYPE SYNTAX INTEGER { ipE2 (1), ipSnap (2), ipxE2(3), ipxNov(4), ipxLlc(5), ipxSnap(6), decnet(7), appletalk(8), ethertypeE2(9), dsapSsap(10), ethertypeSnap(11) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The encoded protocol number used for binding VLAN classification." ::= { groupmobilityTrapsObj 6 } -- Bind Rule ether type gmBindRuleEthertype OBJECT-TYPE SYNTAX INTEGER (1536..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Ethertype value for generic ethertype or snap rule. This value has no meaning for vProtoRuleProtoClass set to values other than 9 or 11." ::= { groupmobilityTrapsObj 7 } -- Bind Rule dsap ssap gmBindRuleDsapSsap OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vProtoRuleProtoClass set to values other than 10." ::= { groupmobilityTrapsObj 8 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- COMPLIANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1GroupMobilityMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Group Mobility." MODULE MANDATORY-GROUPS { groupMobilityRuleGroup, groupMobilityPortGroup, groupMobilityTrapGroup } ::= { alcatelIND1GroupMobilityMIBCompliances 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- UNITS OF CONFORMANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx groupMobilityRuleGroup OBJECT-GROUP OBJECTS { vIpNetRuleAddr, -- ip net rule table vIpNetRuleMask, vIpNetRuleVlanId, vIpNetRuleStatus, vIpxNetRuleAddr, -- ipx net rule table vIpxNetRuleEncap, vIpxNetRuleVlanId, vIpxNetRuleStatus, vMacRuleAddr, -- mac address rule table vMacRuleVlanId, vMacRuleStatus, vMacRangeRuleLoAddr, -- mac range rule table vMacRangeRuleHiAddr, vMacRangeRuleVlanId, vMacRangeRuleStatus, vMacPortIpBRuleMac, -- mac-ip-port binding rule vMacPortIpBRuleIfIndex, vMacPortIpBRuleIp, vMacPortIpBRuleVlanId, vMacPortIpBRuleStatus, vPortIpBRuleIp, -- ip-port binding rule vPortIpBRuleIfIndex, vPortIpBRuleVlanId, vPortIpBRuleStatus, vMacIpBRuleMac, -- mac-ip binding rule vMacIpBRuleIp, vMacIpBRuleVlanId, vMacIpBRuleStatus, vMacPortBRuleMac, -- mac-port binding rule vMacPortBRuleIfIndex, vMacPortBRuleVlanId, vMacPortBRuleStatus, vMacPortProtoBRuleMacAddr, -- mac-port-protocol binding rule vMacPortProtoBRuleIfIndex, vMacPortProtoBRuleProtoClass, vMacPortProtoBRuleEthertype, vMacPortProtoBRuleDsapSsap, vMacPortProtoBRuleVlanId, vMacPortProtoBRuleStatus, vPortProtoBRuleIfIndex, -- port-protocol binding rule vPortProtoBRuleProtoClass, vPortProtoBRuleEthertype, vPortProtoBRuleDsapSsap, vPortProtoBRuleVlanId, vPortProtoBRuleStatus, vDhcpMacRuleAddr, -- dhcp mac rule vDhcpMacRuleVlanId, vDhcpMacRuleStatus, vDhcpPortRuleIfIndex, -- dhcp port rule vDhcpPortRuleVlanId, vDhcpPortRuleStatus, vDhcpGenericRuleVlanId, -- dhcp generic rule vDhcpGenericRuleStatus, vProtoRuleProtoClass, -- protocol rule vProtoRuleEthertype, vProtoRuleDsapSsap, vProtoRuleVlanId, vProtoRuleStatus, vCustomRuleValue, -- custom (user) rule vCustomRuleMask, vCustomRuleOffset, vCustomRuleVlanId, vCustomRuleStatus, vPortRuleIfIndex, -- port rule vPortRuleVlanId, vPortRuleStatus, vDhcpMacRangeRuleLoAddr, -- dhcp mac range rule vDhcpMacRangeRuleHiAddr, vDhcpMacRangeRuleVlanId, vDhcpMacRangeRuleStatus } STATUS current DESCRIPTION "Collection of objects for management of Group Mobility vlan classification rules." ::= { alcatelIND1GroupMobilityMIBGroups 1 } groupMobilityPortGroup OBJECT-GROUP OBJECTS { vMobilePortIfIndex, -- mobile port table vMobilePortMobility, vMobilePortDefVlanRestore, vMobilePortDefVlanEnable, vMobilePortIgnoreBPDU, vMobilePortAuthenticate, vMobilePortCfgDefVlan } STATUS current DESCRIPTION "Collection of objects for management of Mobile Ports." ::= { alcatelIND1GroupMobilityMIBGroups 2 } groupMobilityTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { gmBindRuleViolation } STATUS current DESCRIPTION "Collection of notifications for learned port security." ::= { alcatelIND1GroupMobilityMIBGroups 4 } END