ALCATEL-IND1-DVMRP-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE,
        Integer32
            FROM SNMPv2-SMI
        MODULE-COMPLIANCE, OBJECT-GROUP
            FROM SNMPv2-CONF
        routingIND1Dvmrp
            FROM ALCATEL-IND1-BASE;

alcatelIND1DVMRPMIB MODULE-IDENTITY
    LAST-UPDATED  "200104111220Z"
    ORGANIZATION  "Alcatel - Architects Of An Internet World"
    CONTACT-INFO
        "Please consult with Customer Service to insure the most appropriate
         version of this document is used with the products in question:
         
                    Alcatel Internetworking, Incorporated
                   (Division 1, Formerly XYLAN Corporation)
                           26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                          United States Of America
        
        Telephone:               North America  +1 800 995 2696
                                 Latin America  +1 877 919 9526
                                 Europe         +31 23 556 0100
                                 Asia           +65 394 7933
                                 All Other      +1 818 878 4507
        
        Electronic Mail:         support@ind.alcatel.com
        World Wide Web:          http://www.ind.alcatel.com
        File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
    
    DESCRIPTION
        "This module describes an authoritative enterprise-specific Simple
         Network Management Protocol (SNMP) Management Information Base (MIB):
         
             This MIB contains management information for Coronado Layer 
             3 Hardware Routing Engine (HRE) management.
         
         The right to make changes in specification and other information
         contained in this document without prior notice is reserved.
         
         No liability shall be assumed for any incidental, indirect, special, or
         consequential damages whatsoever arising from or related to this
         document or the information contained herein.
         
         Vendors, end-users, and other interested parties are granted
         non-exclusive license to use this specification in connection with
         management of the products for which it is intended to be used.
         
           Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
                         ALL RIGHTS RESERVED WORLDWIDE"

    REVISION      "200104111220Z"
    DESCRIPTION
        "The latest version of this MIB Module."

    ::= { routingIND1Dvmrp 1 }

alcatelIND1DVMRPMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1DVMRPMIB 1 }

alaDvmrpGlobalConfig    OBJECT IDENTIFIER ::= { alcatelIND1DVMRPMIBObjects 1 }
alaDvmrpDebugConfig OBJECT IDENTIFIER ::= { alcatelIND1DVMRPMIBObjects 2 }

-- ***************************************************************************
-- Global DVMRP Configuration
-- ***************************************************************************

alaDvmrpAdminStatus OBJECT-TYPE
    SYNTAX      INTEGER { 
                 enable(1), 
                 disable(2) 
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Administratively enables/disables the
                 DVMRP protocol on this router."
    DEFVAL      { disable }
    ::= { alaDvmrpGlobalConfig 1}

alaDvmrpRouteReportInterval OBJECT-TYPE
    SYNTAX      Integer32 (10..2000)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The Route Report Interval determines how often
                 a router will send its complete routing tables to
                 neighboring routers running DVMRP."
    DEFVAL      { 60 }
    ::= { alaDvmrpGlobalConfig 2}

alaDvmrpFlashUpdateInterval OBJECT-TYPE
    SYNTAX      Integer32 (5..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The minimum Flash Update Interval defines how often
                 routing table change messages are sent to
                 neighboring DVMRP routers.  Since these messages
                 are sent between the transmission of complete
                 routing tables, the flash update interval value 
                 must be shorter than that of the route report
                 interval."
    DEFVAL      { 5 }
    ::= { alaDvmrpGlobalConfig 3}

alaDvmrpNeighborTimeout OBJECT-TYPE
    SYNTAX      Integer32 (5..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The Neighbor Timeout value specifies how long, without
                 any activity from a neighboring DVMRP router, the
                 router will wait before assuming that the inactive
                 router is down."
    DEFVAL      { 35 }
    ::= { alaDvmrpGlobalConfig 4}

alaDvmrpRouteExpirationTimeout OBJECT-TYPE
    SYNTAX      Integer32 (20..4000)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The Route Expiration Timeout value specifies how
                 long the router will wait before aging out a route.
                 When this value expires, the route is advertised as
                 inactive until either it's activity resumes or it is
                 deleted."
    DEFVAL      { 140 }
    ::= { alaDvmrpGlobalConfig 5}

alaDvmrpRouteHoldDown OBJECT-TYPE
    SYNTAX      Integer32 (1..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Specifies the time during which DVMRP routes are kept
                 in a hold-down state.  A hold-down state refers to
                 the time that a route to an inactive network continues
                 to be advertised."
    DEFVAL      { 120 }
    ::= { alaDvmrpGlobalConfig 6}

alaDvmrpNeighborProbeInterval OBJECT-TYPE
    SYNTAX      Integer32 (5..30)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The Neighbor Probe Interval value specifies how often
                 probes will be transmitted to those interfaces
                 with attached DVMRP neighbors."
    DEFVAL      { 10 }
    ::= { alaDvmrpGlobalConfig 7}

alaDvmrpPruneLifetime OBJECT-TYPE
    SYNTAX      Integer32 (180..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The Prune Lifetime value defines the value
                 whereby a source-rooted multicast tree will be
                 pruned."
    DEFVAL      { 7200 }
    ::= { alaDvmrpGlobalConfig 8}

alaDvmrpPruneRetransmission OBJECT-TYPE
    SYNTAX      Integer32 (30..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The Prune Packet Retransmission value is the duration
                 of time that the router will wait, if it continues
                 to receive unwanted multicast traffic, before
                 retransmitting a prune message."
    DEFVAL      { 30 }
    ::= { alaDvmrpGlobalConfig 9}

alaDvmrpGraftRetransmission OBJECT-TYPE
    SYNTAX      Integer32 (5..86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The Graft message Retransmission value defines 
                 the duration of time that the router will wait
                 before retransmitting a graft message, if it has
                 not already received an acknowledgement from its
                 neighbor."
    DEFVAL      { 5 }
    ::= { alaDvmrpGlobalConfig 10}

-- ************************************************************************
--  DVMRP Debug Configuration
-- ************************************************************************

alaDvmrpDebugLevel     OBJECT-TYPE
    SYNTAX     Integer32 (0..255)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Sets the level of Debugging for the DVMRP Protocol
                on this router.  A level of 0 indicates no debugging."
    DEFVAL     { 0 }
    ::= {alaDvmrpDebugConfig 1}

alaDvmrpDebugError     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Error messages if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 2}

alaDvmrpDebugNbr     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Neighbor processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 3}

alaDvmrpDebugRoutes     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Route processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 4}

alaDvmrpDebugProbes     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Probe processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 5}

alaDvmrpDebugPrunes     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Prune processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 6}

alaDvmrpDebugGrafts     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Graft processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 7}

alaDvmrpDebugTime     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Timer processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 8}

alaDvmrpDebugIgmp     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Igmp processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 9}

alaDvmrpDebugFlash     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Flash processing if the alaDvmrpDebugLevel is greater
                than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 10}

alaDvmrpDebugMip     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                MIP processing (including CLI/SNMP)  if the 
                alaDvmrpDebugLevel is greater than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 11}

alaDvmrpDebugInit     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Initialization if the alaDvmrpDebugLevel is greater than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 12}

alaDvmrpDebugTm     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                Task Manager Interaction  if the alaDvmrpDebugLevel 
                is greater than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 13}

alaDvmrpDebugIpmrm     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables debugging for DVMRP
                IPMRM Interaction  if the alaDvmrpDebugLevel is
                greater than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 14}

alaDvmrpDebugMisc     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables miscellaneous debugging 
                of DVMRP if the alaDvmrpDebugLevel is greater than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 15}

alaDvmrpDebugAll     OBJECT-TYPE
    SYNTAX     INTEGER {
                   enable(1),
                   disable(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
               "Administratively enables/disables all debugging 
                of DVMRP if the alaDvmrpDebugLevel is greater than 0."
    DEFVAL     { disable }
    ::= {alaDvmrpDebugConfig 16}

-- conformance information

alcatelIND1DVMRPMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1DVMRPMIB 2 }
alcatelIND1DVMRPMIBCompliances OBJECT IDENTIFIER ::= 
                                          { alcatelIND1DVMRPMIBConformance 1 }
alcatelIND1DVMRPMIBGroups      OBJECT IDENTIFIER ::= 
                                          { alcatelIND1DVMRPMIBConformance 2 }

-- compliance statements

alaDvmrpCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for routers running DVMRP
            and implementing the ALCATEL-IND1-PIMSM MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { alaDvmrpConfigMIBGroup, alaDvmrpDebugMIBGroup }

    ::= { alcatelIND1DVMRPMIBCompliances 1 }

-- units of conformance

alaDvmrpConfigMIBGroup OBJECT-GROUP
    OBJECTS { alaDvmrpAdminStatus, alaDvmrpRouteReportInterval,
              alaDvmrpFlashUpdateInterval, alaDvmrpNeighborTimeout,
              alaDvmrpRouteExpirationTimeout, alaDvmrpRouteHoldDown,
              alaDvmrpNeighborProbeInterval, alaDvmrpPruneLifetime,
              alaDvmrpPruneRetransmission, alaDvmrpGraftRetransmission
            }
    STATUS  current
    DESCRIPTION
            "A collection of objects to support the management of global
            configuration parameters on DVMRP routers."
    ::= { alcatelIND1DVMRPMIBGroups 1 }

alaDvmrpDebugMIBGroup OBJECT-GROUP
    OBJECTS { alaDvmrpDebugLevel, alaDvmrpDebugError, alaDvmrpDebugNbr, 
              alaDvmrpDebugRoutes, alaDvmrpDebugProbes, alaDvmrpDebugPrunes,
              alaDvmrpDebugGrafts, alaDvmrpDebugTime, alaDvmrpDebugIgmp,
              alaDvmrpDebugFlash, alaDvmrpDebugMip, alaDvmrpDebugInit,
              alaDvmrpDebugTm, alaDvmrpDebugIpmrm, alaDvmrpDebugMisc,
              alaDvmrpDebugAll
            }
    STATUS  current
    DESCRIPTION
            "A collection of optional objects to provide debugging
             support on DVMRP routers."
    ::= { alcatelIND1DVMRPMIBGroups 2 }

END