-- -------------------------------------------------------------------- -- ATM FORUM SOFT PVC MIB -- -- December 1998, Satya Narayana -- -- Copyright (c) 1996-1998, 1999 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** ATM-SOFT-PVC-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TruthValue, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB atmVplVpi, atmVclVpi, atmVclVci FROM ATM-MIB; atmSoftPvcMIB MODULE-IDENTITY LAST-UPDATED "9703010000Z" ORGANIZATION "The ATM Forum." CONTACT-INFO "The ATM Forum 2570 West El Camino Real, Suite 304 Mountain View, CA 94040-1313 USA Phone: +1 415-949-6700 Fax: +1 415-949-6705 info@atmforum.com" DESCRIPTION "ATM Soft PVC MIB" REVISION "9703010000Z" DESCRIPTION "Updated version of the Soft PVC MIB released with the PNNI V1.0 Errata and PICS (af-pnni-81.00)." REVISION "9606210000Z" DESCRIPTION "Initial version of this MIB module." ::= { atmfSoftPvc 1 } atmForum OBJECT IDENTIFIER ::= { enterprises 353 } atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 } atmfSoftPvc OBJECT IDENTIFIER ::= { atmForumNetworkManagement 5 } atmSoftPvcMIBObjects OBJECT IDENTIFIER ::= { atmSoftPvcMIB 1 } atmSoftPvcMIBTraps OBJECT IDENTIFIER ::= { atmSoftPvcMIB 2 } AtmAddr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The ATM address used by the network entity. The address types are: no address (0 octets), E.164 (8 octets)and NSAP (20 octets). Note: The E.164 address is encoded in BCD format." SYNTAX OCTET STRING (SIZE(0|8|20)) -- -- This MIB contains five tables and a number of scalars. The scalars -- contain overall status information and counters. The tables are: -- Soft PVC VCCs - manage Soft PVCC at originating switch -- Soft PVC VPCs - manage Soft PVPC at originating switch -- Interface Soft PVC Address -- Currently failing Soft PVCC table -- Currently failing Soft PVPC table -- -- Traffic statistics for Soft PVCCs and Soft PVPCs are accessible -- via the atmVclStatTable and atmVplStatTable, as defined in the -- Supplemental AtomMIB atmSoftPvcBaseGroup OBJECT IDENTIFIER ::= { atmSoftPvcMIBObjects 1} atmSoftPvcCallFailuresTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the generation of traps in response to call failures. By default, this object is set to 'false'." ::= { atmSoftPvcBaseGroup 1 } atmSoftPvcCallFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a series of call attempts has failed to establish a Soft PVCC or Soft PVPC. The number of call attempts in a series is determined by atmSoftPVccRetryThreshold or atmSoftPVpcRetryThreshold, respectively." ::= {atmSoftPvcBaseGroup 2 } atmSoftPvcCurrentlyFailingSoftPVccs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of Soft PVCCs for which there is an active row in the atmSoftPVccTable having an atmSoftPVccOperStatus with a value other than 'connected'." ::= { atmSoftPvcBaseGroup 3 } atmSoftPvcCurrentlyFailingSoftPVpcs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of Soft PVPCs for which there is an active row in the atmSoftPVpcTable having an atmSoftPVpcOperStatus with a value other than 'connected'." ::= { atmSoftPvcBaseGroup 4 } atmSoftPvcNotificationInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum interval between the sending of atmSoftPvcCallFailuresTrap notifications." DEFVAL { 30 } ::= { atmSoftPvcBaseGroup 5 } -- -- Table to manage Soft PVCCs. -- atmSoftPVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSoftPVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table used to manage Soft Permanent Virtual Channel Connections (Soft PVCCs). The Soft PVCC table is applicable only to switches." ::= { atmSoftPvcMIBObjects 2 } atmSoftPVccEntry OBJECT-TYPE SYNTAX AtmSoftPVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) originating at a switch interface. A Soft PVCC is a VCC that is: - provisioned at the originating (source) interface of the connection - established by signalling procedures across a network to a destination interface. A row in the atmVclTable must be created, defining a VCL on the source interface, prior to creating an atmSoftPVccEntry row. The row in the atmVclTable must be active prior to activating the atmSoftPVccEntry row. The contents of this table reflect only the characteristics unique to a Soft PVCC. The traffic parameters are defined in the VCL row for the source interface, as specified in the ATOMMIB (RFC1695) and the forthcoming addition, the Supplemental ATOMMIB. Note that the atmSigDescrParamTable contains some objects such as the AAL parameters, Broadband high layer information and Broadband low layer information elements which are used to carry end-to-end information. For this reason, these objects are not relevant to Soft PVCCs. When a row is made active, an attempt is made to set up a switched connection to an interface at the destination switch. No objects (other than atmSoftPVccRowStatus) can be set while the row is active. At the destination, the VCL may be defined (but not cross-connected) prior to arrival of the Setup request. The combination of ifIndex, atmVclVpi, and atmVclVci specified in the index clause of this entry serves to identify the VCL on the source interface. The atmSoftPVccLeafReference object aids in distinguishing between leaves of a point-to-multipoint Soft PVCC." INDEX { ifIndex, atmVclVpi, atmVclVci, atmSoftPVccLeafReference } ::= { atmSoftPVccTable 1 } AtmSoftPVccEntry ::= SEQUENCE { atmSoftPVccLeafReference INTEGER, atmSoftPVccTargetAddress AtmAddr, atmSoftPVccTargetSelectType INTEGER, atmSoftPVccTargetVpi INTEGER, atmSoftPVccTargetVci INTEGER, atmSoftPVccLastReleaseCause INTEGER, atmSoftPVccLastReleaseDiagnostic OCTET STRING, atmSoftPVccOperStatus INTEGER, atmSoftPVccRestart INTEGER, atmSoftPVccRetryInterval INTEGER, atmSoftPVccRetryTimer INTEGER, atmSoftPVccRetryThreshold INTEGER, atmSoftPVccRetryFailures Gauge32, atmSoftPVccRetryLimit INTEGER, atmSoftPVccRowStatus RowStatus } atmSoftPVccLeafReference OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer which, in the case of the source VCL having an atmVclCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to a root of a point-to-multipoint Soft PVCC. If the atmVclCastType is not 'p2mpRoot' the value 1 shall be used." ::= { atmSoftPVccEntry 1 } atmSoftPVccTargetAddress OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The target ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated." ::= { atmSoftPVccEntry 2 } atmSoftPVccTargetSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI values. In such a case, once the Soft PVCC atmSoftPVccOperStatus value is 'connected', the value of this object changes to 'required', such that the same VPI/VCI values will continue to be used even if the connection is subsequently torn down and re-established. The VPI/VCI values chosen will be available for reading in atmSoftPVccTargetVpi and atmSoftPVccTargetVci. If the value 'required' is specified, then values must be supplied for objects atmSoftPVccTargetVpi and atmSoftPVccTargetVci prior to activation of the row. These values are then to be used at the destination." DEFVAL { required } ::= { atmSoftPVccEntry 3 } atmSoftPVccTargetVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The VPI value of the VCL used at the target interface. This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'." DEFVAL { 0 } ::= { atmSoftPVccEntry 4 } atmSoftPVccTargetVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The VCI value of the VCL used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'.This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'." ::= { atmSoftPVccEntry 5 } atmSoftPVccLastReleaseCause OBJECT-TYPE SYNTAX INTEGER(1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Release." ::= { atmSoftPVccEntry 6 } atmSoftPVccLastReleaseDiagnostic OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC." ::= { atmSoftPVccEntry 7 } atmSoftPVccOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of the Soft PVCC. Valid values are: other - none of the types specified below establishmentInProgress - connection or party is not operational, but setup or add party attempts are ongoing connected - connection or party is currently operational retriesExhausted - retry limit has been reached and setup or add party attempts have ceased noAddressSupplied - no remote address has been configured, so no setup or add party attempts are initiated lowerLayerDown - underlying ATM interface is not operational When the row is not 'active', the value of this object is 'other'." ::= { atmSoftPVccEntry 8 } atmSoftPVccRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVccOperStatus object transitions to 'establishmentInProgress' (if not already in this state) and the atmSoftPVccRetryFailures object is cleared When the value is set to 'noop' no operation is performed. When read, the value 'noop' is returned." ::= { atmSoftPVccEntry 9 } atmSoftPVccRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the period to wait before attempting to establish the Soft PVCC after the first failed call attempt. The time to wait between subsequent call attempts may differ to implement a backoff scheme. Zero represents an infinite interval indicating no retries." DEFVAL { 10 } ::= { atmSoftPVccEntry 10 } atmSoftPVccRetryTimer OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. When the timer is not running, the value zero shall be returned." ::= { atmSoftPVccEntry 11 } atmSoftPVccRetryThreshold OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attempts are required to increment the atmSoftPvcCallFailures object and thus disables alarms for the Soft PVCC." DEFVAL { 1 } ::= { atmSoftPVccEntry 12 } atmSoftPVccRetryFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVCC is restarted." ::= { atmSoftPVccEntry 13 } atmSoftPVccRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. setting atmSoftPVccRestart to 'restart') to initiate a new attempt to establish the connection. A value of zero indicates no limit - the attempts will continue until successful." DEFVAL { 0 } ::= { atmSoftPVccEntry 14 } atmSoftPVccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a Soft PVCC. When this object is set to 'active' an attempt is made to set up the Soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progress is released." ::= { atmSoftPVccEntry 15 } -- Table to manage Soft PVPCs -- -- The following MIB definition includes support for point to -- multipoint Soft PVPCs. Version 1.0 of the PNNI specification does -- not allow the use of point to multipoint Soft PVPCs. The value -- of atmSoftPVpcLeafReference should always be set to 1 indicating -- a point to point Soft PVPC. -- atmSoftPVpcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmSoftPVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table used to manage Soft Permanent Virtual Path Connections (Soft PVPCs) The Soft PVPC table is applicable only to switches." ::= { atmSoftPvcMIBObjects 3 } atmSoftPVpcEntry OBJECT-TYPE SYNTAX AtmSoftPVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) originating at a switch interface. A Soft PVPC is a VPC that is: - provisioned at the originating (source) interface of the connection - established by signalling procedures across a network to a destination interface. A row in the atmVplTable must be created, defining a VPL on the source interface, prior to creating an atmSoftPVpcEntry row. The row in the atmVplTable must be active prior to activating the atmSoftPVpcEntry row. The contents of this table reflect only the characteristics unique to a Soft PVPC. The traffic parameters are defined in the VPL row for the source interface, as specified in the ATOMMIB (RFC1695) and the forthcoming addition, the Supplemental ATOMMIB. Note that the atmSigDescrParamTable contains some objects such as the AAL parameters, Broadband high layer information, and Broadband low layer information elements which are used to carry end-to-end information. For this reason, these objects are not relevant to Soft PVPCs. When a row is made active, an attempt is made to set up a switched connection to an interface at the destination switch. No objects (other than atmSoftPVpcRowStatus) can be set while the row is active. At the destination, the VPL may be defined (but not cross-connected) prior to arrival of the Setup request. The combination of ifIndex, atmVplVpi specified in the index clause of this entry serves to identify the VPL on the source interface. The atmSoftPVpcLeafReference object aids in distinguishing between leaves of a point-to-multipoint Soft PVPC." INDEX { ifIndex, atmVplVpi, atmSoftPVpcLeafReference } ::= { atmSoftPVpcTable 1 } AtmSoftPVpcEntry ::= SEQUENCE { atmSoftPVpcLeafReference INTEGER, atmSoftPVpcTargetAddress AtmAddr, atmSoftPVpcTargetSelectType INTEGER, atmSoftPVpcTargetVpi INTEGER, atmSoftPVpcLastReleaseCause INTEGER, atmSoftPVpcLastReleaseDiagnostic OCTET STRING, atmSoftPVpcOperStatus INTEGER, atmSoftPVpcRestart INTEGER, atmSoftPVpcRetryInterval INTEGER, atmSoftPVpcRetryTimer INTEGER, atmSoftPVpcRetryThreshold INTEGER, atmSoftPVpcRetryFailures Gauge32, atmSoftPVpcRetryLimit INTEGER, atmSoftPVpcRowStatus RowStatus } atmSoftPVpcLeafReference OBJECT-TYPE SYNTAX INTEGER (1..63535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer which, in the case of the source VPL having a atmVplCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to a root of a point-to-multipoint Soft PVPC. If the atmVplCastType is not 'p2mpRoot', the value 1 shall be used." ::= { atmSoftPVpcEntry 1 } atmSoftPVpcTargetAddress OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The target ATM Address of this Soft PVPC. If no address is supplied, no attempts to establish the Soft PVPC are initiated." ::= { atmSoftPVpcEntry 2 } atmSoftPVpcTargetSelectType OBJECT-TYPE SYNTAX INTEGER { required(1), any(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the target VPI value is to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In such a case, once the Soft PVPC atmSoftPVpcOperStatus value is 'connected', the value of this object changes to 'required', such that the same VPI value will continue to be used even if the connection is subsequently torn down and re-established. The VPI value chosen will be available for reading in atmSoftPVpcTargetVpi. If the value 'required' is specified, then a value must be supplied for object atmSoftPVpcTargetVpi prior to activation of the row. This value is then to be used at the destination." DEFVAL { required } ::= { atmSoftPVpcEntry 3 } atmSoftPVpcTargetVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The VPI value of the VPL used at the target interface. This value must be filled in when the atmSoftPVpcTargetSelectType is set to 'required'. This value is not relevant when the value of atmSoftPVpcTargetSelectType is 'any'." ::= { atmSoftPVpcEntry 4 } atmSoftPVpcLastReleaseCause OBJECT-TYPE SYNTAX INTEGER(1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC. Indicates the reason for the Release." ::= { atmSoftPVpcEntry 5 } atmSoftPVpcLastReleaseDiagnostic OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC." ::= { atmSoftPVpcEntry 6 } atmSoftPVpcOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), establishmentInProgress(2), connected(3), retriesExhausted(4), noAddressSupplied(5), lowerLayerDown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the status of the Soft PVPC. other - none of the types specified below establishmentInProgress - connection or party is not operational, but setup or add party attempts are ongoing connected - connection or party is currently operational retriesExhausted - retry limit has been reached and setup or add party attempts have ceased noAddressSupplied - no remote address has been configured, so no setup or add party attempts are initiated lowerLayerDown - underlying ATM interface is not operational When the row is not 'active', the value of this object is 'other'." ::= { atmSoftPVpcEntry 7 } atmSoftPVpcRestart OBJECT-TYPE SYNTAX INTEGER { restart(1), noop(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When the value is set to 'restart', the Soft PVPC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVpcOperStatus object transitions to 'establishmentInProgress' (if not already in this state) and the atmSoftPVpcRetryFailures object is cleared. When the value is set to 'noop', no operation is performed. When read, the value 'noop' is returned." ::= { atmSoftPVpcEntry 8 } atmSoftPVpcRetryInterval OBJECT-TYPE SYNTAX INTEGER (0..3600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Defines the period to wait before attempting to establish the Soft PVPC after the first failed call attempt. The time to wait between subsequent call attempts may differ to implement a backoff scheme. Zero represents an infinite interval indicating no retries." DEFVAL { 10 } ::= { atmSoftPVpcEntry 9 } atmSoftPVpcRetryTimer OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVPC. When the timer is not running, the value zero shall be returned." ::= { atmSoftPVpcEntry 10 } atmSoftPVpcRetryThreshold OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attempts are required to increment the atmSoftPvcCallFailures object and thus disables alarms for the Soft PVPC." DEFVAL { 1 } ::= { atmSoftPVpcEntry 11 } atmSoftPVpcRetryFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVPC is restarted." ::= { atmSoftPVpcEntry 12 } atmSoftPVpcRetryLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. setting atmSoftPVpcRestart to 'restart') to initiate a new attempt to establish the connection. A value of zero indicates no limit - the attempts will continue until successful." DEFVAL { 0 } ::= { atmSoftPVpcEntry 13 } atmSoftPVpcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete a Soft PVPC. When this object is set to 'active' an attempt is made to set up the Soft PVPC. When this object has the value 'active' and is set to another value, any set-up or connection in-progress is released." ::= { atmSoftPVpcEntry 14 } -- -- This table is used to configure one or more ATM addresses -- prior to setting up Soft PVCCs or Soft PVPCs at an ATM -- interface in a node. -- In addition, prior to setting up a Soft PVC at the source -- interface, this table can be consulted at the destination -- interface. -- atmInterfaceSoftPvcAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceSoftPvcAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure ATM addresses at an ATM interface on this node prior to setting up Soft PVPCs or Soft PVPCs at that interface." ::= { atmSoftPvcMIBObjects 4 } atmInterfaceSoftPvcAddressEntry OBJECT-TYPE SYNTAX AtmInterfaceSoftPvcAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ATM address entry for configuring Soft PVCCs or Soft PVPCs at an ATM interface." INDEX { ifIndex, atmInterfaceSoftPvcAddress } ::= { atmInterfaceSoftPvcAddressTable 1 } AtmInterfaceSoftPvcAddressEntry ::= SEQUENCE { atmInterfaceSoftPvcAddress AtmAddr, atmInterfaceSoftPvcAddressRowStatus RowStatus } atmInterfaceSoftPvcAddress OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the address that can be used to establish a Soft PVCC or Soft PVPC to this interface." ::= { atmInterfaceSoftPvcAddressEntry 1 } atmInterfaceSoftPvcAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create and delete an ATM address at this interface for setting up Soft PVCCs or Soft PVPCs." ::= { atmInterfaceSoftPvcAddressEntry 2 } -- Currently Failing Soft PVCC table atmCurrentlyFailingSoftPVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmCurrentlyFailingSoftPVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table indicating all Soft Permanent Virtual Channel Connections (Soft PVCCs) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is other than 'connected'." ::= { atmSoftPvcMIBObjects 5 } atmCurrentlyFailingSoftPVccEntry OBJECT-TYPE SYNTAX AtmCurrentlyFailingSoftPVccEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is other than 'connected'." INDEX { ifIndex, atmVclVpi, atmVclVci, atmSoftPVccLeafReference } ::= { atmCurrentlyFailingSoftPVccTable 1 } AtmCurrentlyFailingSoftPVccEntry ::= SEQUENCE { atmCurrentlyFailingSoftPVccTimeStamp TimeStamp } atmCurrentlyFailingSoftPVccTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which this Soft PVCC began to fail." ::= { atmCurrentlyFailingSoftPVccEntry 1 } -- Currently Failing Soft PVPC table atmCurrentlyFailingSoftPVpcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmCurrentlyFailingSoftPVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table indicating all Soft Permanent Virtual Path Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is other than 'connected'." ::= { atmSoftPvcMIBObjects 6 } atmCurrentlyFailingSoftPVpcEntry OBJECT-TYPE SYNTAX AtmCurrentlyFailingSoftPVpcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is other than 'connected'." INDEX { ifIndex, atmVclVpi, atmSoftPVpcLeafReference } ::= { atmCurrentlyFailingSoftPVpcTable 1 } AtmCurrentlyFailingSoftPVpcEntry ::= SEQUENCE { atmCurrentlyFailingSoftPVpcTimeStamp TimeStamp } atmCurrentlyFailingSoftPVpcTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which this Soft PVPC began to fail." ::= { atmCurrentlyFailingSoftPVpcEntry 1 } -- Soft PVC Traps atmSoftPvcTraps OBJECT IDENTIFIER ::= { atmSoftPvcMIBTraps 1 } atmSoftPvcTrapsPrefix OBJECT IDENTIFIER ::= { atmSoftPvcTraps 0 } atmSoftPvcCallFailuresTrap NOTIFICATION-TYPE OBJECTS { atmSoftPvcCallFailures, atmSoftPvcCurrentlyFailingSoftPVccs, atmSoftPvcCurrentlyFailingSoftPVpcs } STATUS current DESCRIPTION "A notification indicating that one or more series of call attempts in trying to establish a Soft PVPC or Soft PVCC have failed since the last atmSoftPvcCallFailureTrap was sent. If this trap has not been sent for the last atmSoftPvcNotificationInterval, then it will be sent on the next increment of atmSoftPvcCallFailures." ::= { atmSoftPvcTrapsPrefix 1 } -- conformance information atmSoftPvcMIBConformance OBJECT IDENTIFIER ::= { atmSoftPvcMIB 3 } atmSoftPvcMIBCompliances OBJECT IDENTIFIER ::= { atmSoftPvcMIBConformance 1 } atmSoftPvcMIBGroups OBJECT IDENTIFIER ::= { atmSoftPvcMIBConformance 2 } -- compliance statements atmSoftPvcMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the ATM Soft PVC group." MODULE -- this module MANDATORY-GROUPS { atmSoftPvcBaseMIBGroup, atmSoftPvcVccMIBGroup, atmSoftPvcAddressMIBGroup } OBJECT atmSoftPVccRetryLimit MIN-ACCESS read-only DESCRIPTION "Write access not required." GROUP atmSoftPvcVpcMIBGroup DESCRIPTION "Required if Soft PVPCs are supported." OBJECT atmSoftPVpcRetryLimit MIN-ACCESS read-only DESCRIPTION "Write access not required." ::= { atmSoftPvcMIBCompliances 1 } -- units of conformance atmSoftPvcBaseMIBGroup OBJECT-GROUP OBJECTS { atmSoftPvcCallFailuresTrapEnable, atmSoftPvcCallFailures, atmSoftPvcCurrentlyFailingSoftPVccs, atmSoftPvcCurrentlyFailingSoftPVpcs, atmSoftPvcNotificationInterval } STATUS current DESCRIPTION "A collection of objects to related to failing Soft PVCCs and Soft PVPCs." ::= { atmSoftPvcMIBGroups 1 } atmSoftPvcVccMIBGroup OBJECT-GROUP OBJECTS { atmSoftPVccTargetAddress, atmSoftPVccTargetSelectType, atmSoftPVccTargetVpi, atmSoftPVccTargetVci, atmSoftPVccLastReleaseCause, atmSoftPVccLastReleaseDiagnostic, atmSoftPVccOperStatus, atmSoftPVccRestart, atmSoftPVccRetryInterval, atmSoftPVccRetryTimer, atmSoftPVccRetryThreshold, atmSoftPVccRetryFailures, atmSoftPVccRetryLimit, atmSoftPVccRowStatus } STATUS current DESCRIPTION "A collection of objects managing Soft PVCCs." ::= { atmSoftPvcMIBGroups 2 } atmSoftPvcVpcMIBGroup OBJECT-GROUP OBJECTS { atmSoftPVpcTargetAddress, atmSoftPVpcTargetSelectType, atmSoftPVpcTargetVpi, atmSoftPVpcLastReleaseCause, atmSoftPVpcLastReleaseDiagnostic, atmSoftPVpcOperStatus, atmSoftPVpcRestart, atmSoftPVpcRetryInterval, atmSoftPVpcRetryTimer, atmSoftPVpcRetryThreshold, atmSoftPVpcRetryFailures, atmSoftPVpcRetryLimit,atmSoftPVpcRowStatus } STATUS current DESCRIPTION "A collection of objects managing Soft PVPCs." ::= { atmSoftPvcMIBGroups 3 } atmSoftPvcAddressMIBGroup OBJECT-GROUP OBJECTS { atmInterfaceSoftPvcAddressRowStatus } STATUS current DESCRIPTION "A collection of objects managing interfaces addresses for Soft PVCCs and Soft PVPCs." ::= { atmSoftPvcMIBGroups 4 } atmCurrentlyFailingSoftPVccMIBGroup OBJECT-GROUP OBJECTS { atmCurrentlyFailingSoftPVccTimeStamp } STATUS current DESCRIPTION "A collection of objects for management of currently failing Soft PVCCs." ::= { atmSoftPvcMIBGroups 5 } atmCurrentlyFailingSoftPVpcMIBGroup OBJECT-GROUP OBJECTS { atmCurrentlyFailingSoftPVpcTimeStamp } STATUS current DESCRIPTION "A collection of objects for management of currently failing Soft PVPCs." ::= { atmSoftPvcMIBGroups 6 } END