-- ============================================================================
-- AT-BOARDS.MIB, Allied Telesis enterprise MIB: SWITCH module
--
-- Extracted from ATROUTER.MIB of pre 2.9.1 release
--
-- June 2006, Stan Xiang
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
-- 
-- ============================================================================


AT-SWITCH-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE
    	FROM SNMPv2-SMI

    DisplayString
        FROM SNMPv2-TC

	modules
		FROM AT-SMI-MIB
;

swi MODULE-IDENTITY
    LAST-UPDATED "200606121222Z"
    ORGANIZATION "Allied Telesis, Inc"
	CONTACT-INFO
	    "http://www.alliedtelesis.com"
	DESCRIPTION
	    "This MIB file contains definitions of managed objects for the
	    SWITCH module. "

    REVISION "200606121222Z"
DESCRIPTION
	"Initial Revision"

::= { modules 87}


-- The branch is named 'swi' because it is the common internal module name, 
-- also to reduce the chance of naming conflicts with other MIB objects.

swiPortTable  OBJECT-TYPE
   SYNTAX    	SEQUENCE OF SwiPortEntry
   MAX-ACCESS   not-accessible
   STATUS    	current
   DESCRIPTION
           "Table of port properties."
   ::= { swi 1 }

swiPortEntry  OBJECT-TYPE
   SYNTAX    	SwiPortEntry
   MAX-ACCESS   not-accessible
   STATUS    	current
   DESCRIPTION
           "An entry in the port information table."
   INDEX   { swiPortNumber }
   ::= { swiPortTable 1 }

SwiPortEntry  ::=
   SEQUENCE {
        swiPortNumber
           INTEGER,
        swiPortIngressLimit
           INTEGER,
        swiPortEgressLimit
           INTEGER
   }

swiPortNumber OBJECT-TYPE
   SYNTAX    	INTEGER
   MAX-ACCESS   read-only
   STATUS    	current
   DESCRIPTION
             "This object identifies the port of the switch."
   ::= { swiPortEntry 1 }


swiPortIngressLimit OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
            "The Ingress Bandwidth Limit applied to the port. A value of
            zero indicates that no limit is set."
    ::= { swiPortEntry 20 }

swiPortEgressLimit OBJECT-TYPE
    SYNTAX  	INTEGER
    MAX-ACCESS  read-write
    STATUS  	current
    DESCRIPTION
            "The Egress Bandwidth Limit applied to the port. A value of
            zero indicates that no limit is set."
    ::= { swiPortEntry 21 } 
    
swiPortVlanTable  OBJECT-TYPE
   SYNTAX    	SEQUENCE OF SwiPortVlanEntry
   MAX-ACCESS   not-accessible
   STATUS    	current
   DESCRIPTION
           "Table of port vlan properties."
   ::= { swi 4 }

swiPortVlanEntry  OBJECT-TYPE
   SYNTAX    	SwiPortVlanEntry
   MAX-ACCESS   not-accessible
   STATUS    	current
   DESCRIPTION
           "An entry of vlan  in the port information table."
   INDEX   { swiPortVlanPortNumber, swiPortVlanVlanId }
   ::= { swiPortVlanTable 1 }

SwiPortVlanEntry  ::=
   SEQUENCE {
        swiPortVlanPortNumber
           INTEGER,
        swiPortVlanVlanId
           INTEGER,
        swiPortVlanControl
           INTEGER 
   }

swiPortVlanPortNumber OBJECT-TYPE
   SYNTAX    	INTEGER
   MAX-ACCESS   not-accessible
   STATUS    	current
   DESCRIPTION
             "This object identifies the port of the switch."
   ::= { swiPortVlanEntry 1 } 
   
swiPortVlanVlanId OBJECT-TYPE
   SYNTAX    	INTEGER
   MAX-ACCESS   read-only
   STATUS    	current
   DESCRIPTION
             "This object identifies the vlans that a port attached to "
   ::= { swiPortVlanEntry 2 }       

swiPortVlanControl OBJECT-TYPE
   SYNTAX    	INTEGER {
                	enable (1),
                    disable (2)
				 }
   MAX-ACCESS   read-write
   STATUS    	current
   DESCRIPTION
             "The writting to this object enables or disable the port in a vlan.
              The reading  of this object indicates the port state in a vlan. "
   ::= { swiPortVlanEntry 3 }   
   
swiPortVlanStateNotify NOTIFICATION-TYPE
   OBJECTS {swiPortVlanPortNumber, swiPortVlanVlanId, swiPortVlanControl}
   STATUS  current
   DESCRIPTION
   "This objects informs a state change of a port in vlan."
   ::= { swi 9 }
   
-- The following table lists the various switch port counters for the
-- swi56xx based products.

swi56xxPortCounterTable  OBJECT-TYPE
   SYNTAX    	SEQUENCE OF Swi56xxPortCounterEntry
   MAX-ACCESS   not-accessible
   STATUS    	current
   DESCRIPTION
           "Table of swi56xx port counter properties."
   ::= { swi 2 }

swi56xxPortCounterEntry  OBJECT-TYPE
   SYNTAX    	Swi56xxPortCounterEntry
   MAX-ACCESS   not-accessible
   STATUS    	current
   DESCRIPTION
           "An entry in the port information table."
   INDEX   { swi56xxPortNumber }
   ::= { swi56xxPortCounterTable 1 }

Swi56xxPortCounterEntry  ::=
   SEQUENCE {
        swi56xxPortNumber
           INTEGER,
		swi56xxRxTx64kPkts
           Counter32, 
	    swi56xxRxTx65To127kPkts 
           Counter32, 
	    swi56xxRxTx128To255kPkts
           Counter32, 
	    swi56xxRxTx256To511kPkts
           Counter32, 
	    swi56xxRxTx512To1023kPkts
           Counter32, 
	    swi56xxRxTx1024ToMaxPktSzPkts
           Counter32, 
	    swi56xxRxTx519To1522kPkts 
           Counter32, 
        swi56xxPortRxOctets
           Counter32, 
        swi56xxPortRxPkts
           Counter32,
        swi56xxPortRxFCSErrors
           Counter32, 
        swi56xxPortRxMulticastPkts
           Counter32,                
        swi56xxPortRxBroadcastPkts
           Counter32, 
        swi56xxPortRxPauseMACCtlFrms
           Counter32,
        swi56xxPortRxOversizePkts
           Counter32, 
        swi56xxPortRxFragments
           Counter32,
        swi56xxPortRxJabbers
           Counter32,                
        swi56xxPortRxMACControlFrms
           Counter32, 
        swi56xxPortRxUnsupportOpcode
           Counter32,
        swi56xxPortRxAlignmentErrors
           Counter32,                                              
        swi56xxPortRxOutOfRngeLenFld
           Counter32,
        swi56xxPortRxSymErDurCarrier
           Counter32, 
        swi56xxPortRxCarrierSenseErr
           Counter32,
        swi56xxPortRxUndersizePkts
           Counter32, 
        swi56xxPortRxIpInHdrErrors 
           Counter32,            
        swi56xxPortTxOctets
           Counter32, 
        swi56xxPortTxPkts
           Counter32,
        swi56xxPortTxFCSErrors
           Counter32, 
        swi56xxPortTxMulticastPkts
           Counter32,                
        swi56xxPortTxBroadcastPkts
           Counter32, 
        swi56xxPortTxPauseMACCtlFrms
           Counter32,
        swi56xxPortTxOversizePkts
           Counter32, 
        swi56xxPortTxFragments
           Counter32,
        swi56xxPortTxJabbers
           Counter32,
        swi56xxPortTxPauseCtrlFrms
           Counter32, 
        swi56xxPortTxFrameWDeferrdTx
           Counter32, 
        swi56xxPortTxFrmWExcesDefer
           Counter32, 
        swi56xxPortTxSingleCollsnFrm
           Counter32, 
        swi56xxPortTxMultCollsnFrm
           Counter32, 
        swi56xxPortTxLateCollsns
           Counter32, 
        swi56xxPortTxExcessivCollsns
           Counter32, 
        swi56xxPortTxCollisionFrames
           Counter32, 
        swi56xxPortMiscDropEvents
           Counter32,                                                                                                                                          
        swi56xxPortMiscTaggedPktTx
           Counter32,
        swi56xxPortMiscTotalPktTxAbort
           Counter32,
        swi56xxPortHWMultiTTLexpired
           Counter32,
        swi56xxPortHWMultiBridgedFrames
           Counter32,
        swi56xxPortHWMultiRxDrops
           Counter32,
        swi56xxPortHWMultiTxDrops
           Counter32                                                                
   }

swi56xxPortNumber OBJECT-TYPE
   SYNTAX    	INTEGER
   MAX-ACCESS   read-only
   STATUS    	current
   DESCRIPTION
             "This object identifies the port of the switch."
   ::= { swi56xxPortCounterEntry 1 }

swi56xxRxTx64kPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of 64kB packets received and transmitted."
    ::= { swi56xxPortCounterEntry 2 }

swi56xxRxTx65To127kPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of 65kB To 127kB packets received and transmitted."
    ::= { swi56xxPortCounterEntry 3 }

swi56xxRxTx128To255kPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of 128kB To 255kB packets received and transmitted."
    ::= { swi56xxPortCounterEntry 4 }

swi56xxRxTx256To511kPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of 256kB To 511kB packets received and transmitted."
    ::= { swi56xxPortCounterEntry 5 }

swi56xxRxTx512To1023kPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of 512kB To 1023kB packets received and transmitted."
    ::= { swi56xxPortCounterEntry 6 }

swi56xxRxTx1024ToMaxPktSzPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of 1024kB To MaxPktSz packets received and transmitted."
    ::= { swi56xxPortCounterEntry 7 }

swi56xxRxTx519To1522kPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of 519kB To 1522kB packets received and transmitted."
    ::= { swi56xxPortCounterEntry 8 }

swi56xxPortRxOctets OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of octets received."
    ::= { swi56xxPortCounterEntry 9 }

swi56xxPortRxPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of packets received."
    ::= { swi56xxPortCounterEntry 10 }

swi56xxPortRxFCSErrors OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames received containing a Frame Check Sequence
             error."
    ::= { swi56xxPortCounterEntry 11 }

swi56xxPortRxMulticastPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of multicast packets received."
    ::= { swi56xxPortCounterEntry 12 }

swi56xxPortRxBroadcastPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of broadcast packets received."
    ::= { swi56xxPortCounterEntry 13 }

swi56xxPortRxPauseMACCtlFrms OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of valid PAUSE MAC Control frames received."
    ::= { swi56xxPortCounterEntry 14 }

swi56xxPortRxOversizePkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of oversize packets received."
    ::= { swi56xxPortCounterEntry 15 }

swi56xxPortRxFragments OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of fragments received."
    ::= { swi56xxPortCounterEntry 16 }

swi56xxPortRxJabbers OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of jabber frames received."
    ::= { swi56xxPortCounterEntry 17 }

swi56xxPortRxMACControlFrms OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of MAC Control frames (Pause and
             Unsupported) received."
    ::= { swi56xxPortCounterEntry 18 }

swi56xxPortRxUnsupportOpcode OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of MAC Control frames with unsupported
             opcode (i.e. not Pause) received."
    ::= { swi56xxPortCounterEntry 19 }

swi56xxPortRxAlignmentErrors OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames with alignment errors received."
    ::= { swi56xxPortCounterEntry 20 }

swi56xxPortRxOutOfRngeLenFld OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of packets with length out of range received."
    ::= { swi56xxPortCounterEntry 21 }

swi56xxPortRxSymErDurCarrier OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames with invalid data symbols received."
    ::= { swi56xxPortCounterEntry 22 }

swi56xxPortRxCarrierSenseErr OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of false carrier conditions between frames received."
    ::= { swi56xxPortCounterEntry 23 }

swi56xxPortRxUndersizePkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of undersized packets received."
    ::= { swi56xxPortCounterEntry 24 }

swi56xxPortRxIpInHdrErrors OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "swiPortRxIpInHdrErrors"
    ::= { swi56xxPortCounterEntry 25 }

swi56xxPortTxOctets OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of octets transmitted."
    ::= { swi56xxPortCounterEntry 26 }

swi56xxPortTxPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of packets transmitted."
    ::= { swi56xxPortCounterEntry 27 }

swi56xxPortTxFCSErrors OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames containing a Frame Check Sequence
             error transmitted."
    ::= { swi56xxPortCounterEntry 28 }

swi56xxPortTxMulticastPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of multicast packets transmitted."
    ::= { swi56xxPortCounterEntry 29 }

swi56xxPortTxBroadcastPkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of broadcast packets transmitted."
    ::= { swi56xxPortCounterEntry 30 }

swi56xxPortTxPauseMACCtlFrms OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of valid PAUSE MAC Control frames transmitted."
    ::= { swi56xxPortCounterEntry 31 }
    
swi56xxPortTxOversizePkts OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of oversize packets transmitted."
    ::= { swi56xxPortCounterEntry 32 }
           
swi56xxPortTxFragments OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of fragments transmitted."
    ::= { swi56xxPortCounterEntry 33 }
    
swi56xxPortTxJabbers OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of jabber frames transmitted."
    ::= { swi56xxPortCounterEntry 34 }
    
swi56xxPortTxPauseCtrlFrms OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of Pause control frames transmitted."
    ::= { swi56xxPortCounterEntry 35 }                                                              

swi56xxPortTxFrameWDeferrdTx OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames deferred once before successful
             transmission."
    ::= { swi56xxPortCounterEntry 36 }
    
swi56xxPortTxFrmWExcesDefer OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frame aborted after too many deferrals."
    ::= { swi56xxPortCounterEntry 37 }

swi56xxPortTxSingleCollsnFrm OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames which experienced exactly one
             collision."
    ::= { swi56xxPortCounterEntry 38 }

swi56xxPortTxMultCollsnFrm OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames which experienced 2 to 15 collisions
             (including late collisions)."
    ::= { swi56xxPortCounterEntry 39 }

swi56xxPortTxLateCollsns OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames which experienced late collisions."
    ::= { swi56xxPortCounterEntry 40 }

swi56xxPortTxExcessivCollsns OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of frames aborted before transmission after 16
             collisions."
    ::= { swi56xxPortCounterEntry 41 }

swi56xxPortTxCollisionFrames OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The total number of collisions."
    ::= { swi56xxPortCounterEntry 42 }

swi56xxPortMiscDropEvents OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of packets discarded at ingress port."
    ::= { swi56xxPortCounterEntry 43 }

swi56xxPortMiscTaggedPktTx OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of VLAN tagged packets transmitted."
    ::= { swi56xxPortCounterEntry 44 }

swi56xxPortMiscTotalPktTxAbort OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "The number of Layer 2 and 3 packets aborted during
             transmission."
    ::= { swi56xxPortCounterEntry 45 }

swi56xxPortHWMultiTTLexpired OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "Number of multicast TTL expired frames."
    ::= { swi56xxPortCounterEntry 46 }

swi56xxPortHWMultiBridgedFrames OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "Number of multicast bridged frames"
    ::= { swi56xxPortCounterEntry 47 }

swi56xxPortHWMultiRxDrops OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "Number of multicast frames dropped at reception"
    ::= { swi56xxPortCounterEntry 48 }
    
swi56xxPortHWMultiTxDrops OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "NNumber of multicast frames dropped at transmission"
    ::= { swi56xxPortCounterEntry 49 }
    

-- A MIB group set up to contain odds and ends of debugging variables in the SWI module.

swiDebugVariables OBJECT IDENTIFIER ::= { swi 3 }
swiTrap  OBJECT IDENTIFIER ::= { swi 0 }

swiDebugMemoryParityErrors OBJECT-TYPE
    SYNTAX  	Counter32
    MAX-ACCESS  read-only
    STATUS  	current
    DESCRIPTION
            "For switches based on certain switch chips, the number of parity errors
            that have been detected in packet memory associated with the switch. If the
            device does not include the counting of memory parity errors, this variable
            will return 0."
    ::= { swiDebugVariables 1 }

swiIntrusionDetectionTrap NOTIFICATION-TYPE
    OBJECTS   	{ swiPortNumber }
	STATUS		current
    DESCRIPTION
                "An intrusion detection trap is generated when a port has intrusion
                detection enabled, and the action taken when intrusion is detected is
                to generate a trap. Intrusion is detected when the number of MAC
                addresses learned on the port exceeds the configured learn limit.
                The ifIndex of the port is included in the trap."
    ::= { swiTrap 6 }

END